16 Test Equipment and Accessories / 7PA

7PA22/23
Auxiliary Relays for Various Applications
Technical data for 7PA22 and 7PA23

Switching contacts
Continuous current 10 A
Overload capability 80 A/200 ms
150 A/10 ms
Switching current/voltage 40 A/0.5 s/110 V DC
Breaking capacity for 105 operating cycles
Non-inductive Inductive, 20 ms
LSP2427_afp.tif

1 contact 2 contacts 1 contact 2 contacts

LSP2415_afp.tif
in series in series
V DC A A A A
24 6.6 12.7 3.2 6.0
60 2.6 4.9 1.4 2.7
125 1.2 2.2 0.6 1.1
220 0.6 1.1 0.3 0.6
Fig. 16/2 7PA2 auxiliary relays
For details see characteristics
Vmax, open contact 250 V DC/400 V AC
Mechanical service life 107 operating cycles
Operating temperature - 10 °C to + 55 °C
14 °F to 131 °F
Max. permissible humidity 93 % at 40 °C/104 °F
Seismic stress class according to IEEE 501
Degree of ZPA 3 g acceleration at
Description 33 Hz

Due to their quality, reliability and design,

these relays are optimal for applications re-
quiring high reliability and availability
such as power stations, substations, railway
and industrial plants. Typical examples in-
clude petrochemical industry, chemical in-
dustry, cement industry, rolling mills etc.
The relays comply with the IEC, EN, IEEE
standards (type and routine test) and bear
the CE mark.
The robust switch contacts are character-
Standards
ized by high make/break capacity, overload
capability and continuous current intensity Electrical tests performed according to IEC 60255
- Dielectric test 2 kV/50 Hz/ 1 min
capacity; thus perfect insulation is obtain- - Surge withstand 5 kV/1.2/50 µs
ed. Direct control of high-voltage and me- test
dium-voltage switchgear is possible. - Insulation > 2000 MΩ/
500 Vpeak-to-peak
Their high degree of protection and the Flammability tests according to IEC 60692-2-1
transparent cover ensure reliable operation Plastic materials UL 94: VO,
in tropical and/or salty sea air ambient IEC 60695: 850 °C/30 s
conditions. 1562 °F/30 s
Degree of protection Relay: IP 40
acc. to IEC 60529 With socket cover:
IP 50
Climatic stress test according to
- IEC 60255-7 Non-dissipating unit
dry heat +70 °C/96 h 158 °F/96 h
Dissipating unit
+55 °C/96 h 131 °F/96 h
- IEC 60068-2-30 +55 °C/12 h
cyclic humid heat 131 °F/12 h
- IEC 60068-2-1 100 cycles
cold Non-dissipating unit

- IEC 60255-7
-10 °C/2 h 14 °F/2 h
At rated voltage VN
16
thermal aging test +55 °C/1440 h
131 °F/1440 h

Siemens SIP · 2008 16/5

 16 Test Equipment and Accessories / 7PA

Technical data
7PA22
While the auxiliary voltage is being sup-
Fast-acting lockout relay plied to the SET coil, the reset pushbutton
Description must not remain pushed longer than 20 s.

The bistable 7PA22 is a fast-acting lockout Rated voltages and consumption

relay with eight changeover contacts and is VN Voltage range Consumption
plugged into a mounting frame equipped while switching
with a plug-in socket (type 7XP9010) with V DC V DC
screw-type terminals at the rear. 24 19 – 26
Functions 30 24 – 33
No continuous power consumption. Posi- 60 48 – 66 ≤ 48 W
tion indication on the front side. Mechani- 110 88 – 121
cal reset pushbutton. 125 100 – 137
Position memory with two positions
(e.g. for yes/no, open/close, auto/manual, 220 176 – 242
local/remote etc.). Pick-up time: < 10 ms Fig. 16/3 Connection diagram
General description see page 16/5.
Refer to part 17 for dimension drawings.

Selection and ordering data Description Order No.

7PA22 fast-acting lockout relay 7PA22o1-o

Auxiliary voltage
24 V DC 1
60 V DC 2
110 V DC 3
220 V DC 4
125 V DC 5
30 V DC 6

Socket
without socket 0
with flush-mounting socket 7XP9010-1 1

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9010-1
Surface mounting 7XP9012-0

16

16/6 Siemens SIP · 2008

 16 Test Equipment and Accessories / 7PA

7PA23 Technical data

While the auxiliary voltage is being sup-
Fast-acting lockout relay plied to the SET coil, the reset pushbutton
Description must not remain pushed longer than 20 s.

The bistable 7PA23 is a fast-acting lockout Rated voltages and consumption

relay with four changeover contacts and is VN Voltage range Consumption
plugged into a mounting frame equipped while switching
with a plug-in socket (type 7XP9011) with V DC V DC
screw-type terminals at the rear.
24 19 – 26
Functions 30 24 – 33
No continuous power consumption. Posi- 60 48 – 66 ≤ 24 W
tion indication on the front side. Mechani- 110 88 – 121
cal reset pushbutton.
125 100 – 137 Fig. 16/4 Connection diagram
Position memory with two positions
(e.g. for yes/no, open/close, auto/manual, 220 176 – 242 Contacts represented in position RESET
local/remote etc.). Pick-up time: < 8 ms
General description see page 16/5.
Refer to part 17 for dimension drawings.

Selection and ordering data Description Order No.

7PA23 fast-acting lockout relay 7PA23o1-o

Auxiliary voltage
24 V DC 1
60 V DC 2
110 V DC 3
220 V DC 4
125 V DC 5
30 V DC 6

Socket
without socket 0
with flush-mounting socket 7XP9011-1 1

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9011-1
Surface mounting 7XP9013-0

16

Siemens SIP · 2008 16/7