Scribd
Upload
55 views

4bit Digital Tube Display Mod

This document provides instructions for using a 4-digit 7-segment LED display with an Arduino. It includes a list of materials, pin layout of the display, wiring diagram, and Arduino code to display the numbers 1-2-3-4 on the display by activating the appropriate LED segments. The code defines functions for activating each digit and number, as well as clearing the display.

Uploaded by

Adam Mikitzel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

4bit Digital Tube Display Mod

This document provides instructions for using a 4-digit 7-segment LED display with an Arduino. It includes a list of materials, pin layout of the display, wiring diagram, and Arduino code to display the numbers 1-2-3-4 on the display by activating the appropriate LED segments. The code defines functions for activating each digit and number, as well as clearing the display.

Uploaded by

Adam Mikitzel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Four bit digital tube

Summary
This project will teach you how to use Four bit digital tube for display.

Materials
Arduino Uno x 1
220 Ohm resistor x 8
Breadboard x 1
4 digit LED x 1
DuPont wires (few pcs)

Product Description

The segments are Light Emitting Diodes and they therefore need a series
resistance to prevent burning out.
Digital display is widely used in instruments, clocks, displays and so on.

Pin Layout

Device Parameters
Type: common anode
Size: 30mm * 14mm * 7.2mm (L*W*T)
Luminous color: Highlight-red
Device layout and Schematic
Wiring Diagram

Program Code

//display 1234

//Set cathode interface

int a = 1;

int b = 2;

int c = 3;

int d = 4;

int e = 5;

int f = 6;

int g = 7;

int dp = 8;

//Set anode interface


int d4 = 9;

int d3 = 10;

int d2 = 11;

int d1 = 12;

//Set variable

long n = 1230;

int x = 100;

int del = 55; //Here to fine tune the clock

void setup()

pinMode(d1, OUTPUT);

pinMode(d2, OUTPUT);

pinMode(d3, OUTPUT);

pinMode(d4, OUTPUT);

pinMode(a, OUTPUT);

pinMode(b, OUTPUT);

pinMode(c, OUTPUT);

pinMode(d, OUTPUT);

pinMode(e, OUTPUT);

pinMode(f, OUTPUT);

pinMode(g, OUTPUT);

pinMode(dp, OUTPUT);

/////////////////////////////////////////////////////////////

void loop()

Display(1, 1);

Display(2, 2);

Display(3, 3);
Display(4, 4);

///////////////////////////////////////////////////////////////

void WeiXuan(unsigned char n)//

switch(n)

case 1:

digitalWrite(d1,HIGH);

digitalWrite(d2, LOW);

digitalWrite(d3, LOW);

digitalWrite(d4, LOW);

break;

case 2:

digitalWrite(d1, LOW);

digitalWrite(d2, HIGH);

digitalWrite(d3, LOW);

digitalWrite(d4, LOW);

break;

case 3:

digitalWrite(d1,LOW);

digitalWrite(d2, LOW);

digitalWrite(d3, HIGH);

digitalWrite(d4, LOW);

break;

case 4:

digitalWrite(d1, LOW);

digitalWrite(d2, LOW);

digitalWrite(d3, LOW);

digitalWrite(d4, HIGH);
break;

default :

digitalWrite(d1, LOW);

digitalWrite(d2, LOW);

digitalWrite(d3, LOW);

digitalWrite(d4, LOW);

break;

void Num_0()

digitalWrite(a, LOW);

digitalWrite(b, LOW);

digitalWrite(c, LOW);

digitalWrite(d, LOW);

digitalWrite(e, LOW);

digitalWrite(f, LOW);

digitalWrite(g, HIGH);

digitalWrite(dp,HIGH);

void Num_1()

digitalWrite(a, HIGH);

digitalWrite(b, LOW);

digitalWrite(c, LOW);

digitalWrite(d, HIGH);

digitalWrite(e, HIGH);

digitalWrite(f, HIGH);

digitalWrite(g, HIGH);

digitalWrite(dp,HIGH);

void Num_2()
{

digitalWrite(a, LOW);

digitalWrite(b, LOW);

digitalWrite(c, HIGH);

digitalWrite(d, LOW);

digitalWrite(e, LOW);

digitalWrite(f, HIGH);

digitalWrite(g, LOW);

digitalWrite(dp,HIGH);

void Num_3()

digitalWrite(a, LOW);

digitalWrite(b, LOW);

digitalWrite(c, LOW);

digitalWrite(d, LOW);

digitalWrite(e, HIGH);

digitalWrite(f, HIGH);

digitalWrite(g, LOW);

digitalWrite(dp,HIGH);

void Num_4()

digitalWrite(a, HIGH);

digitalWrite(b, LOW);

digitalWrite(c, LOW);

digitalWrite(d, HIGH);

digitalWrite(e, HIGH);

digitalWrite(f, LOW);

digitalWrite(g, LOW);

digitalWrite(dp,HIGH);

}
void Num_5()

digitalWrite(a, LOW);

digitalWrite(b, HIGH);

digitalWrite(c, LOW);

digitalWrite(d, LOW);

digitalWrite(e, HIGH);

digitalWrite(f, LOW);

digitalWrite(g, LOW);

digitalWrite(dp,HIGH);

void Num_6()

digitalWrite(a, LOW);

digitalWrite(b, HIGH);

digitalWrite(c, LOW);

digitalWrite(d, LOW);

digitalWrite(e, LOW);

digitalWrite(f, LOW);

digitalWrite(g, LOW);

digitalWrite(dp,HIGH);

void Num_7()

digitalWrite(a, LOW);

digitalWrite(b, LOW);

digitalWrite(c, LOW);

digitalWrite(d, HIGH);

digitalWrite(e, HIGH);

digitalWrite(f, HIGH);

digitalWrite(g, HIGH);

digitalWrite(dp,HIGH);
}

void Num_8()

digitalWrite(a, LOW);

digitalWrite(b, LOW);

digitalWrite(c, LOW);

digitalWrite(d, LOW);

digitalWrite(e, LOW);

digitalWrite(f, LOW);

digitalWrite(g, LOW);

digitalWrite(dp,HIGH);

void Num_9()

digitalWrite(a, LOW);

digitalWrite(b, LOW);

digitalWrite(c, LOW);

digitalWrite(d, LOW);

digitalWrite(e, HIGH);

digitalWrite(f, LOW);

digitalWrite(g, LOW);

digitalWrite(dp,HIGH);

void Clear() // Clear the screen

digitalWrite(a, HIGH);

digitalWrite(b, HIGH);

digitalWrite(c, HIGH);

digitalWrite(d, HIGH);

digitalWrite(e, HIGH);

digitalWrite(f, HIGH);

digitalWrite(g, HIGH);
digitalWrite(dp,HIGH);

void pickNumber(unsigned char n)//Choose the number of

switch(n)

case 0:Num_0();

break;

case 1:Num_1();

break;

case 2:Num_2();

break;

case 3:Num_3();

break;

case 4:Num_4();

break;

case 5:Num_5();

break;

case 6:Num_6();

break;

case 7:Num_7();

break;

case 8:Num_8();

break;

case 9:Num_9();

break;

default:Clear();

break;

void Display(unsigned char x, unsigned char Number)//Show that x is the coordinate, Number is
the number
{

WeiXuan(x);

pickNumber(Number);

delay(1);

Clear() ; //Vanishing

Results

You might also like