Scribd
Upload
56 views

Given Data: F'C Fy A1 A2 A2/A1 Pu MX My M D BF

The document provides design details for a base plate including: 1. Given parameters such as concrete strength, steel yield strength, loads, and dimensions. 2. Calculations to determine the required base plate size, length, width, thickness, and bearing stress based on the allowable bearing stress. 3. Selection of base plate dimensions satisfying the design requirements. 4. Calculation of required bolt length based on allowable tensile load and required hook length. 5. Selection of bolt length satisfying the design.

Uploaded by

INNOVATIVE ENGINEER
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
56 views

Given Data: F'C Fy A1 A2 A2/A1 Pu MX My M D BF

The document provides design details for a base plate including: 1. Given parameters such as concrete strength, steel yield strength, loads, and dimensions. 2. Calculations to determine the required base plate size, length, width, thickness, and bearing stress based on the allowable bearing stress. 3. Selection of base plate dimensions satisfying the design requirements. 4. Calculation of required bolt length based on allowable tensile load and required hook length. 5. Selection of bolt length satisfying the design.

Uploaded by

INNOVATIVE ENGINEER
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

GIVEN DATA

Compressive Strength of Concrete f'c = 3.00 N/sq-mm


Yield Strength of Steel fy = 36.00 N/sq-mm
Area of Base Plate A1 = 1 sq-mm
Area of Supporting Pedestal A2 = 4 sq-mm
A2/A1 = 4
Axial Load on Base Plate Pu = 60 N
Moment Mx Mx = 480 N-mm
Moment My My = 200 N-mm
Max Moment M= 480 N-mm
Depth of Column d= 8 mm
Width of flange bf = mm

DESIGN

1 Allowable Bearing Stress Fp = 2.10 N/sq-mm


Max Moment M= 480.00 N-mm

3 Assume Base Plate Length N= 14.00 mm


Assume Base Plate Width A= 14.00 mm
Effecitve Eccentricity e= 8.00 mm Greater than half width
Dist of Anchor bolt from Plate edge 1.50 mm
Thus N' = 12.50 mm
5.50
4 Average Bearing stress f' = 183.75 N/sq-mm
A= 5.10 mm Checked OK

5 T= 15.01 N Checked OK

6 Critical Section is located at 3.20 mm


for unit width
Mpl = 4.01
n half width
GIVEN DATA
Compressive Strength of Concrete f'c = 3.00 N/sq-mm
Yield Strength of Steel fy = 36.00 N/sq-mm
Area of Base Plate A1 = sq-mm
Area of Supporting Pedestal A2 = sq-mm
Axial Load on Base Plate Pu = 88 N
Moment Mx Mx = 309 N-mm
Moment My My = 700 N-mm
Max Moment M= 700 N-mm
Δ= mm
Depth of Column d = 11.1 mm
Width of flange bf = 10.34 mm

DESIGN

1 The allowable bearing stress Fp = 2.10 N/sq-mm

2 Area of Bearing Plate Required A1 = 41.90 sq-mm

3 Δ = 1.13 mm
Required Length of Base Plate N N = 7.60 mm
Provide Length of Base Plate N N = 8.00 mm
Require Width of Base Plate Required B B = 5.2381 mm
Provide Weidth of Base Plate B N = 5.00 mm

4 Actual Bearing Stress fp = 2.20 mm

5 Larger Value 'm' or 'n' m= -1.27 mm


n= -1.64 mm

6 Thickness of Base Plate Required tp tp = -0.63 mm


Provide thickness of Base Plate tp = -1.00 mm
GIVEN DATA
Compressive Strength of Concrete f'c = 25.00 N/sq-mm
Yield Strength of Steel fy = 250.00 N/sq-mm
Area of Base Plate A1 = sq-mm
Area of Supporting Pedestal A2 = sq-mm
Axial Load on Base Plate Pu = 88 N
Moment Mx Mx = 309 N-mm
Moment My My = 700 N-mm
Max Moment M= 700 N-mm
Δ= mm
Depth of Column d = 11.1 mm
Width of flange bf = 10.34 mm

DESIGN

1 The allowable bearing stress Fp = 17.50 N/sq-mm

2 Area of Bearing Plate Required A1 = 5.03 sq-mm

3 Δ = 1.13 mm
Required Length of Base Plate N N = 3.37 mm
Provide Length of Base Plate N N = 4.00 mm
Require Width of Base Plate Required B B = 1.2571 mm
Provide Weidth of Base Plate B N = 1.00 mm

4 Actual Bearing Stress fp = 22.00 mm

5 Larger Value 'm' or 'n' m= -3.27 mm


n= -3.64 mm

6 Thickness of Base Plate Required tp tp = -1.94 mm


Provide thickness of Base Plate tp = -2.00 mm
GIVEN DATA

Diameter of bolt 0.75 mm


Fu = 58 N/sq-mm
f'c = 3 N/sq-mm

Length of Foundation Bolt

1 Allowable bolt tensile load T= 8.45 N

2 Required hook length Lh = 4.56 mm

Total Bolt Length 9.16 mm


9.00 mm
Provide Length of bolt 9.16 mm

Edge Distance

You might also like