OnMetro OT8200 Series Brief
OnMetro OT8200 Series Brief
‐ Mini 3-Slot
OT8200-3S ‐ 2 built–in fixed FAN
‐ 1 slot for NMC , 2 slot for Line Card
‐ Mini 2-Slot
OT8200-2S ‐ 2 built–in fixed FAN
‐ 1 slot for NMC , 1 slot for Line Card
‐ 2 QSFP28 ports
OT8200-3R-100G-2Q
‐ 100G 3R Transponder
‐ 2 SFP+ ports
OT8200-3R-10G-2S ‐ 10G 3R Transponder
‐ 4 SFP+ ports
OT8200-3R-10G-4S ‐ APS option, Switch-over time < 50ms
‐ 10G 3R Transponder
‐ 2 SFP ports
OT8200-3R-3G-2S ‐ 3G 3R Transponder
‐ 4 SFP ports
OT8200-3R-3G-4S ‐ APS option, Switch-over time < 50ms
‐ 3G 3R Transponder
OverView
The OnMetro OT8200 is a Multi-Service Platform that offers a full range of solutions for service
provider and enterprise, including high density 10G/40G/100G connectivity, DWDM, CWDM,
distance extension, Ethernet Switch/NID, Fiber Modem, Fiber Multiplexer and Media Converter. It is
a fully modular product series that integrates a wide range of optical transport modules for any
interface or protocol.
Advantages
Compliance with Carrier Grade Standards, all the features of a carrier class
Flexible mix of services from 100Mb to 100G including Ethernet Connectivity, Storage, Video,
TDM Service, CPRI,Fits multiple fiber network applications
Simple to Install, configuration and maintenance
Pay-as-you grow architecture, Scalable, Flexible for future growth
Transparent, Ultra Low latency for high bandwidth applications
Full Bi-Directional 3R functionality per each service +
Dual redundant pluggable AC/DC PSU and FAN unit
All products are Green technology with low power consumption compliant with international
standards
Web based, 3rd party SNMP and EMS/NMS management solutions
No extra licensing or server cost
Product Highlights
3U 19” 22-slot chassis with 1 slot for Network Management Card (NMC), 17 slots for Line cards,
2 slots for power modules and 2 slots for fan modules
1U 19” 10-slot chassis with 1 slot for Network Management Card (NMC), 5 slots for Line cards, 2
slots for power modules and 2 slots for fan modules
2-slot mini chassis with 1 slot for Network Management Card (NMC) and 1 slot for Line card
3-slot mini chassis with 1 slot for Network Management Card (NMC) and 2 slot for Line card
Various line cards, includes MC, Transponder, CWDM, OAPS
Single fiber to dual fiber conversion; Multi-mode fiber to single-mode fiber conversion;
wavelength conversion
Various SFP/SFP+/QSFP+/QSFP28/CFP2 options support Digital Diagnostic Monitoring
Interface(DDMI)
Egress/Ingress rate management control
WAN side protection switchover time less than 50ms from active to standby fiber for the MCs with
OAPS (Optical Automatic Protection Switch) function
Programmable link fault pass-through (LFP) or remote fault detection (RFD) function
Remote power on / off detection with dying gasp alarm
Remote loopback capability for link integrity test
Dual hot-swappable power supplies of load sharing
Dual hot-swappable fan modules with monitoring and alarm features
Support hardware management such as chassis info, system info, line card type, card hardware
version, card location, port description etc.
Alarm for link status, card plug-in/remove and power on/off
Wide applications - media conversion, signal repeating, wavelength conversion, redundant links
System Information
Model Description
‐ Standard 19 inch 1U rack mounted
‐ Support dual hot-swappable power supplies
(AC/DC)
‐ 1 slot for NMC , 5 slot for Line Card
‐ 2 slot for FAN module
OT8200-1U-AA/DD/AD
‐ 2 slot for Power module
‐ -AA includes two AC Power module, -DD
includes two DC Power module, -AD includes
Chassis one AC Power module plus one DC Power
module
‐ Standard 19 inch 3U rack mounted
‐ Support dual hot-swappable power supplies
(AC/DC)
OT8200-3U-AA/DD/AD ‐ 1 slot for NMC , 17 slots for Line Card
‐ 2 slot for FAN module
‐ 2 slot for Power module
‐ -AA includes two AC Power module, -DD
‐ 4 SFP+ port
OT8200-3R-10G-4S ‐ APS option, Switch-over time < 50ms
‐ 10G 3R Transponder
‐ 2 SFP port
OT8200-3R-3G-2S
‐ 3G 3R Transponder
‐ 4 SFP port
OT8200-3R-3G-4S ‐ APS option, Switch-over time < 50ms
‐ 3G 3R Transponder
OT8200-OP ‐ Switch-over time < 20ms
< 50ms
Auto(link down or signal degrade) or Manual
APS
Revertive and Non-Revertive
LED Indicator
2) Protection mode
3) Monitor mode
2) Protection mode
3) Monitor mode
OP
Transponder Protection
Network Applications
Active Mux/Demux
Cost effective
Simple setup and maintenance
Physical Specifications