Scribd
Upload
488 views3 pages

Electronic Water Level Controller Device

This electronic water level controller uses two level indicators and a power switching relay to monitor the water level in a tank and turn an electric water pump on and off accordingly. It works by using conductivity to sense the water level - when the level drops low, it triggers the low-level LED and relay to turn the pump on. When the level reaches high, the high-level LED turns on and the relay switches off the pump until the level drops low again. The device prevents wastage from over- or under-filling tanks by automating pump control based on real-time water level readings.

Uploaded by

SHREE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
488 views3 pages

Electronic Water Level Controller Device

This electronic water level controller uses two level indicators and a power switching relay to monitor the water level in a tank and turn an electric water pump on and off accordingly. It works by using conductivity to sense the water level - when the level drops low, it triggers the low-level LED and relay to turn the pump on. When the level reaches high, the high-level LED turns on and the relay switches off the pump until the level drops low again. The device prevents wastage from over- or under-filling tanks by automating pump control based on real-time water level readings.

Uploaded by

SHREE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Electronic Water Level Controller Device

The filling of water tanks have been done through electrical pumps in the recent.
However, untimely turning off the motor pumps lead to less filled tanks or over
flown water from the tanks causing wastage. In order to avoid such situations we
can have an electronic water level controller which can monitor the water level
and switch the motor pump accordingly.
This device has two level indicators which work in harmony of a power switching
relay. This relay is the one which connects the water pump to the mains power
supply. If the system indicates that water level in the tank is Low, then the system
turns on the power supply for the water pump. The pump remains till the system
indicates the water level is low. Once the system indicates the water level as high
and not low, the power to the water pump is switched off. It remains switched off
till the water level is not again to the low level in the tank.
Conductivity of water is what makes the level sensing work. With a reference level
at the bottom we attach the rest two of the high and low level sensing wire
terminals at their respective positions. At the time when water isn’t the high level
the circuit triggers the low level LED and also the relay to turn ON the water
pump. Once the water level catches up the high level, the high level indicator is
turned ON and the relay is switched to turn OFF the water pump till the next low
level trigger.
Block Diagram:

Hardware Specifications
 ICs 4049
 IC 555
 Relay
 Transistor
 Resistors
 Capacitor
 LEDs
 Connectors

You might also like