Magnetic

Products
For Industrial, Commercial and Retail Applications

The
 Eclipse Magnetics
Over 100 Years of Manufacturing Excellence

Eclipse Magnetics is at the forefront of Contents

development in magnetic materials and design.
With over 100 years experience, we have a
The
P1-2
proven track record for supplying quality
products and providing total customer support
to some of the leading names in the industry. The world famous Eclipse branded range of magnets and
pot magnets. A variety of value adding products which
encompass over 100 years of magnet heritage and quality.
Eclipse Tools North America Inc., is a wholly
owned subsidiary of Spear & Jackson PLC, and P3-6
is responsible for the sales, distribution, and
customer service of the Eclipse Magnetics
range throughout North America. A range of high performance magnet materials and
assemblies for a variety of applications, from basic
clamping or holding to complex design engineering
You’ve used our products... projects.

There’s a very good chance that today you’ve

used something that either contains or was P7-10
manufactured with the aid of an Eclipse
Magnetics product. Innovative magnetic products for workshop,
factory or DIY applications, including welding
Our range includes over 20,000 clamps, pick-up equipment, tool holders and trays.

magnets and magnetic products which are

used in most industries, including automotive, P11-13
steel, food, environmental, communications,
petrochemical, and engineering as well as in
commercial, office, and retail premises. Almost Magnetic bases and chucks for
all our products are available direct from stock. quick, easy mounting and maintaining precision
accuracy in measurement or machining applications.

Worldwide reach
Our sales and service network provides P14–15
technical advice and support all over the world.

Improve steel lifting efficiency and safety

with our range of easy operation magnetic
lifters.

P16

High quality Electromagnets for

hold and release applications including
access control and automation projects.

Guide to Magnetic Materials P17

Eclipse Magnetics Innovative Magnetic Solutions

 The
We are proud of our magnet heritage which began in 1914. In fact our Heritage range
is globally recognized as a symbol of high quality craftsmanship and guaranteed high
performance. Over the years, we have set the benchmark for magnet quality and pioneered
magnet designs which have become the industry norm worldwide.

Alnico
• Alnico 5 magnet material (unless stated) • Magnetically stable at high temp.
• 550°C/1022°F max. operating temp. (unless stated) • Good corrosion resistance

Alnico Product Number Diameter Length Pairs / Pack

Cylindrical Bars METRIC

E805
mm

6
mm

20 10
• Sold in pairs E806 8 25 5
E807 10 30 5
• Typical Applications: Reed switches,
• hall effect sensors, coin operated IMPERIAL in in

• machines, security instruments, E805 0.236 0.787 10

• electrical meters, circuit boards E806 0.314 0.984 5
E807 0.393 1.181 5

Alnico Product Number Material Length Width Height Pairs / Pack

Rectangular Bars METRIC

E842 Alnico 2
mm

50
mm

15.0
mm

10 2

• Sold in pairs E843 Alnico 2 75 15.0 10 2

E844 Alnico 5 20 10.0 5 5
• North pole indicated by notch
E845 Alnico 5 40 12.5 5 5
• Typical Applications: Components
E846 Alnico 5 60 15.0 5 5
• for reed switches, relays, hall effect
• sensors, oil filters, educational use, IMPERIAL in in in

• laboratory use E842 Alnico 2 1.968 0.590 0.393 2

E843 Alnico 2 2.953 0.590 0.393 2
E844 Alnico 5 0.787 0.393 0.197 5
E845 Alnico 5 1.575 0.492 0.197 5
E846 Alnico 5 2.362 0.590 0.197 5

Alnico Minor Product Number Length Width Height Pole Gap Pull Force Units / Pack

METRIC mm mm mm mm kg
• Typical Applications: Educational
E801 22.2 7.9 11.1 6.3 0.9 10
• use, DIY use, attracting,
• holding or clamping steel parts IMPERIAL in in in in lbs

E801 0.874 0.311 0.437 0.252 2.0 10

Alnico Buttons Product Number Diameter Height Slot Size (Min–Max) Hole Size Pull Force Units / Pack

METRIC mm mm mm mm kg
• Max temperature 220°C / 428°F
E821 12.7 9.5 4.0–7.2 4.4 0.7 10
• Typical Applications: Paint plant jigs, E822 19.1 12.7 5.6–8.7 4.8 1.9 10
• damping applications, relay switches, E823 25.4 15.9 5.6–8.7 4.8 3.4 10
• temperature sensitive devices E824 31.8 25.4 8.0–12.7 7.1 4.8 2
E825 22.2 19.1 6.3-6.3 4.8 3.0 10

IMPERIAL in in in in lbs

E821 0.500 0.375 0.16-0.28 0.177 1.5 10

E822 0.750 0.500 0.22-0.34 0.188 4.2 10
E823 1.000 0.625 0.22-0.34 0.188 7.5 10
E824 1.250 1.000 0.31-0.50 0.279 10.6 2
E825 0.874 0.750 0.25-0.25 0.188 6.6 10

Alnico Pockets Product Number Length Width Height Width Of Gap Pull Force Units / Pack

METRIC mm mm mm mm kg
• E802 Alnico 5
E802 28.5 7.6 25.4 6.3 2.4 10
• E803 Alnico 2 E803 33.3 15.9 35.0 7.9 4.0 5

• Typical Applications: Educational use, IMPERIAL in in in in lbs

• DIY use, holding and E802 1.122 0.299 1.000 0.248 5.3 10

• clamping steel parts E803 1.311 0.625 1.378 0.311 8.8 5

Eclipse Magnetics Innovative Magnetic Solutions 1

 Alnico Power Product Number Length Width Height Width Of Gap Hole Size Hole Centres Pull Force Units / Pack

Magnets METRIC
811
mm

30
mm

20
mm

20
mm

15
mm

5
mm

n/a
kg

5 5
• Typical Applications: Retrieval, 812 40 25 25 20 5 n/a 9 5
• welding/soldering fixtures, 813 45 30 30 23 5 n/a 12 2
• ultrasonic testing, crack detection, 814 57 41 35 28 2 x 7.9 32 24 1
• general attracting, clamping and 815 70 57 41 34 2 x 7.9 38 37 1
• holding steel parts 816 79 83 54 39 2 x 9.5 43 47 1
817 60 62 40 32 n/a n/a 35 1
818 79 86 54 48 n/a n/a 60 1

IMPERIAL in in in in in in lbs

811 1.181 0.787 0.787 0.590 0.197 n/a 10 5

812 1.575 0.984 0.984 0.787 0.197 n/a 20 5
813 1.771 1.181 1.181 0.906 0.197 n/a 26 2
814 2.283 1.594 1.377 1.094 2 x 0.311 1.260 52 1
815 2.756 2.251 1.625 1.342 2 x 0.311 1.496 82 1
816 3.125 3.250 2.125 1.515 2 x 0.374 1.693 103 1
817 2.374 2.440 1.575 1.250 n/a n/a 77 1
818 3.125 3.374 2.125 1.874 n/a n/a 132 1

Alnico Shallow Pots Product Number Diameter Thickness Hole Size Screw Head Size Pull Force Units / Pack

METRIC mm mm mm kg
• Max operating temperature 450°C / 842°F
826 19.1 7.5 3.7-6.7 M3 csk 3.0 10
• Mild steel pot 827 28.6 8.7 4.8-8.6 M4 csk 5.0 10
• Typical Applications: For height restricted 828 38.1 10.4 4.8-8.6 M4 csk 13.0 5
• applications, gripping, lifting, positioning
IMPERIAL in in in lbs
• jigs, soldering fixtures, general securing
826 0.750 0.295 0.145-0.263 M3 csk 6.6 10
• and fixtures
827 1.125 0.344 0.189-0.339 M4 csk 11.0 10
828 1.500 0.407 0.189-0.339 M4 csk 28.6 5

Alnico Deep Product

Number Diameter Height Thread
Size
Pull
Force
Units /
Pack
Product
Number Diameter Height Thread
Size
Pull
Force
Units /
Pack

Pots METRIC mm mm kg IMPERIAL in in lbs

829 9.5 15 M3 1.0 10 829 0.375 0.594 M3 2.2 10

• Max operating temperature 220°C / 425°F 830 12.7 16 M4 2.0 10 830 0.500 0.625 M4 4.4 10
• Mild steel pot, aluminum spacer 831NF 17.5 16 10 UNF 2.7 10 831NF 0.689 0.629 10 UNF 5.8 10

• Typical Applications: Gripping, lifting, 832NF 20.5 19 10 UNF 4.0 5 832NF 0.807 0.748 10 UNF 8.8 5
• positioning jigs, soldering fixtures, general 833NF 27.0 25 10 UNF 6.1 5 833NF 1.062 1.000 10 UNF 13.4 5
• securing and fixtures 834NF 35.0 30 10 UNF 14.8 2 834NF 1.377 1.181 10 UNF 32.5 2

Ceramic • High resistance to demagnetization

Ceramic Product Number

METRIC
Length
mm
Width
mm
Height
mm
Plain Fixing Holes
mm
Hole Centres
mm
Pull Force
kg
Units / Pack

Channels E898/2 130 30 13 4.2 90 14 5

E899 190 43 13 4.2 110 48 2
• Max operating temperature 120°C / 248°F
IMPERIAL in in in in in lbs
• Mild steel body
E898/2 5.12 1.81 0.512 0.165 3.54 31 5
E899 7.48 1.69 0.512 0.165 4.33 106 2

Ceramic Shallow Product

Number Diameter Thickness Thread Pull
Force
Units /
Pack
Product
Number Diameter Thickness Thread Pull
Force
Units /
Pack

Pots With Hook METRIC mm mm kg IMPERIAL in in lbs

E890 46 10.7 M6 6 5 E890 1.811 0.421 M6 13.2 5

• Max operating temperature 120°C/248°F E891 56 10.7 M6 16 5 E891 2.205 0.421 M6 35.2 5
• Mild steel pot E892 66 10.7 M6 25 5 E892 2.598 0.421 M6 55.0 5

• Removable hook Fixing Stud Centres

Product Number Diameter Height PCD M6
Central Fixing Point Pull Force Units / Pack
• Typical Applications: For height restricted
• applications, light lifting, holding, METRIC mm mm kg

• securing and clamping E895 66 10.7 46mm - 3 holes M6 25 1

E896 76 12.5 46mm - 3 holes M6 33 1
E897 100 15.5 70mm - 3 holes M6 55 1

IMPERIAL in in lbs

E895 2.598 0.421 1.811in - 3 holes M6 55 1

With M6 tapped holes
E896 2.992 0.492 1.811in - 3 holes M6 73 1
E897 3.397 0.590 2.756in - 3 holes M6 121 1

2 Eclipse Magnetics Innovative Magnetic Solutions

 Our Utility range includes a variety of magnet materials and assemblies which are ideal for
design engineering and practical projects, from basic clamping and holding to complex
power generation or sensor applications.

• Also known as Rare Earth • 80°C/176°F max. operating temp. (unless stated)
Neodymium •
•
Strongest magnet material available
N35 grade (Nickel plated)
• Custom designs available

Neodymium Discs Product

Number Diameter Thickness Pull Force Units / Pack Product
Number Diameter Thickness Pull Force Units / Pack

METRIC mm mm kg IMPERIAL in in lbs

• Max operating temperature 120°C/248°F
N100 3.0 1.5 0.3 10 N100 0.12 0.06 0.7 10
• Ideal where compact size and N101 4.7 1.5 0.4 10 N101 0.19 0.06 0.8 10
• maximum strength are required N104 5.6 12.7 1.9 5 N104 0.22 0.50 4.1 5
N105 6.4 2.5 0.5 10 N105 0.25 0.10 1.2 10
• Ideal for retail, display or industrial
N106 6.4 3.2 0.6 10 N106 0.25 0.13 1.4 10
• holding or mounting applications
N108 6.4 5.1 1.5 10 N108 0.25 0.20 3.3 10
N109 6.4 6.4 1.6 10 N109 0.25 0.25 3.5 10
N110 6.4 12.7 1.9 5 N110 0.25 0.50 4.3 5
N112 9.5 1.5 0.8 10 N112 0.38 0.06 1.8 10
N114 9.5 3.2 1.6 10 N114 0.38 0.13 3.6 10
N115 9.5 4.7 1.8 10 N115 0.38 0.19 4.0 10
N117 9.5 6.4 2.1 10 N117 0.38 0.25 4.7 10
N119 9.5 12.7 3.3 5 N119 0.38 0.50 7.2 5
N120 12.7 1.5 1.4 10 N120 0.50 0.06 3.0 10
N121 12.7 3.2 2.1 10 N121 0.50 0.13 4.6 10
N124 12.7 6.4 3.2 10 N124 0.50 0.25 7.0 10
N125 12.7 9.5 6.5 5 N125 0.50 0.38 14.3 5
N126 12.7 12.7 8.6 5 N126 0.50 0.50 19.0 5
N127 19.1 9.5 10.0 5 N127 0.75 0.38 22.0 5

Neodymium Style Product Number Diameter Thickness Pull Figure Style Product Number Diameter Thickness Pull Figure

Pots A
METRIC
E684
mm
51.6
mm
4.6
kg
67 A
IMPERIAL
E684
in
2.03
in
0.18 148
lbs

• Ideal for retail, display or industrial A E685 66.5 9.4 91 A E685 2.62 0.37 200
• holding or mounting applications Style A Style B B E686 51.6 4.6 43 B E686 2.03 0.18 95
• Style A: Nickel Plated Pot B E687 51.6 4.6 67 B E687 2.03 0.18 148
• Style B: Shallow Pot With Loop B E688 66.5 9.4 91 B E688 2.62 0.37 200

• Style C: Shallow Pot With Bolt C E689 51.6 20.6 43 C E689 2.03 0.81 95
C E690 51.6 20.6 67 C E690 2.03 0.81 148

Style C C E691 66.5 25.4 91 C E691 2.62 1.00 200

Neodymium Shallow Product Number Diameter Thickness Total Height Thread Size Ferrule Outer Dia. Pull Force Units / Pack

Pots With Threaded METRIC mm mm mm mm kg

E770NEO 6 4.5 11.5 M3 6 0.5 20

Hole E771NEO 8 4.5 11.5 M3 6 1.3 20

E772NEO 10 4.5 11.5 M3 6 2.5 20
• Zinc plated body E773NEO 13 4.5 11.5 M3 6 6.0 20
• With female threaded hole for E774NEO 16 4.5 11.5 M4 8 9.5 20
• component mounting E775NEO 20 6.0 13.0 M4 8 14.0 10
E776NEO 25 7.0 14.0 M4 8 20.0 10
E777NEO 32 7.0 15.5 M5 10 35.0 5

IMPERIAL in in in in lbs

E770NEO 0.236 0.177 0.450 M3 0.236 1.1 20

E771NEO 0.315 0.177 0.450 M3 0.236 2.9 20
E772NEO 0.394 0.177 0.450 M3 0.236 5.5 20
E773NEO 0.512 0.177 0.450 M3 0.236 13.2 20
E774NEO 0.630 0.177 0.450 M4 0.315 20.9 20
E775NEO 0.787 0.236 0.510 M4 0.315 30.8 10
E776NEO 0.984 0.275 0.550 M4 0.315 44.0 10
E777NEO 1.260 0.275 0.610 M5 0.394 77.0 5

Eclipse Magnetics Innovative Magnetic Solutions 3

 Neodymium Shallow Product Number Diameter Thickness Hole Size Screw Head Pull Force Units / Pack

Pots With METRIC

E1000/NEO
mm

16
mm

4.5
mm

3.5 M3
kg

7.5 20
Countersunk E1001/NEO 20 6.0 4.5 M4 10.5 10

Hole E1002/NEO
E1003/NEO
25
32
7.0
7.0
4.5
5.5
M4
M5
16.0
31.0
10
10
• Zinc plated body E1004/NEO 40 8.0 5.5 M5 50.0 5
E1005/NEO 48 11.5 8.5 M8 87.0 1
• With countersunk hole for
• screw fixings IMPERIAL in in in lbs

E1000/NEO 0.60 0.18 0.14 M3 16.5 20

E1001/NEO 0.80 0.25 0.18 M4 23.1 10
E1002/NEO 1.00 0.30 0.18 M4 35.3 10
E1003/NEO 1.25 0.30 0.22 M5 68.3 10
E1004/NEO 1.60 0.30 0.22 M5 110.2 5
E1005/NEO 1.90 0.45 0.33 M8 191.8 1

Neodymium Hook Product Number Diameter Thickness Thread Length Thread Size Pull Force Units / Pack

Magnet METRIC
E2226
mm

36.1
mm

6.35
mm

6.35 No. 6-32 UNC

kg

18.1 1
• Ideal for use in office, basement,
garage, or home organization applications
1.42
IMPERIAL in in in lbs

E2226 1.42 0.25 0.25 No. 6-32 UNC 40.0 1

Neodymium Pot Product Number Diameter Thickness Pull Force Units / Pack

With Swivel Hook METRIC mm mm kg

E2227 38.1 12.7 29.5 1

• Ideal for use in office, basement, IMPERIAL in in lbs
garage, or home organization applications
E2227 1.50 0.50 65.0 1

Neodymium Bi-Pole Product

Number Diameter Height Thread
Size
Pull
Force
Units /
Pack
Product
Number Diameter Height Thread
Size
Pull
Force
Units /
Pack

Deep Pots With METRIC

NH025
mm

12.7
mm

12 M5
kg

2.5 10
IMPERIAL
NH025
in

0.500 0.472
in

M5
lbs

5.5 10
Threaded Hole NH065 16.0 16 M6 8.0 10 NH065 0.630 0.630 M6 17.6 10
NH130 22.2 20 M6 16.0 5 NH130 0.874 0.787 M6 35.3 5
• Aluminum pot with mild steel NH240 25.4 25 M6 25.0 5 NH240 1.000 0.984 M6 55.1 5
• pole pieces

Alnico
Alnico Pots Product Number Diameter Length Thread Size Pull Force Product Number Diameter Length Thread Size Pull Force

METRIC mm mm kg IMPERIAL in in lbs

• Max operating temperature 220°C / 425°F
M19169NK 6.35 12.70 No. 6 UNC 0.09 M19169NK 0.250 0.500 No. 6 UNC 0.2
• Mild steel pot, aluminium spacer M19170NK 6.35 19.05 No. 6 UNC 0.14 M19170NK 0.250 0.750 No. 6 UNC 0.3
• Typical Applications: Gripping, lifting, M19171NK 6.35 25.40 No. 6 UNC 0.18 M19171NK 0.250 1.000 No. 6 UNC 0.4
• positioning jigs, soldering fixtures, general M19172NK 9.53 12.70 No. 6 UNC 0.64 M19172NK 0.375 0.500 No. 6 UNC 1.4
• securing and fixtures M19173NK 9.53 19.05 No. 6 UNC 0.68 M19173NK 0.375 0.750 No. 6 UNC 1.5
M19174NK 12.70 25.40 No. 6 UNC 0.77 M19174NK 0.375 1.000 No. 6 UNC 1.7
M19175NK 12.70 12.70 No. 6 UNC 1.13 M19175NK 0.500 0.500 No. 6 UNC 2.5
M19176NK 12.70 19.05 No. 6 UNC 1.36 M19176NK 0.500 0.750 No. 6 UNC 3.0
M19177NK 12.70 25.40 No. 6 UNC 1.36 M19177NK 0.500 1.000 No. 6 UNC 3.0
M19178NK 15.88 12.70 No. 10 UNC 1.04 M19178NK 0.625 0.500 No. 10 UNC 2.3
M19179NK 15.88 19.05 No. 10 UNC 1.81 M19179NK 0.625 0.750 No. 10 UNC 4.0
M19180NK 15.88 25.40 No. 10 UNC 1.81 M19180NK 0.625 1.000 No. 10 UNC 4.0
M19181NK 19.05 12.70 No. 10 UNC 2.27 M19181NK 0.750 0.500 No. 10 UNC 5.0
M19182NK 19.05 19.05 No. 10 UNC 4.08 M19182NK 0.750 0.750 No. 10 UNC 9.0
M19183NK 19.05 25.40 No. 10 UNC 4.08 M19183NK 0.750 1.000 No. 10 UNC 9.0
M19184NK 25.40 12.70 1/4” UNC 3.18 M19184NK 1.000 0.500 1/4” UNC 7.0
M19185NK 25.40 19.05 1/4” UNC 6.35 M19185NK 1.000 0.750 1/4” UNC 14.0
M19186NK 25.40 25.40 1/4” UNC 7.26 M19186NK 1.000 1.000 1/4” UNC 16.0
M19187NK 31.75 12.70 1/4” UNC 2.72 M19187NK 1.250 0.500 1/4” UNC 6.0
M19188NK 31.75 19.05 1/4” UNC 6.80 M19188NK 1.250 0.750 1/4” UNC 15.0
M19189NK 31.75 25.40 1/4” UNC 9.98 M19189NK 1.250 1.000 1/4” UNC 22.0
M19190NK 31.75 31.75 1/4” UNC 11.34 M19190NK 1.250 1.250 1/4” UNC 25.0

4 Eclipse Magnetics Innovative Magnetic Solutions

Ceramic •
•
High resistance to demagnetization
80°C/176°F max. operating temp. (unless stated)

Ceramic Low Product Number Length Width Height Pull Force Product Number Length Width Height Pull Force

Profile Channels METRIC

E660
mm

139.7
mm

34.9
mm

9.5
kg

12
IMPERIAL
E660
in

5.5
in

1.4
in

0.4
lbs

28
• Steel channels with ceramic magnets E662 139.7 34.9 14.3 22 E662 5.5 1.4 0.6 49
E663 304.8 38.1 8.7 6 E663 12.0 1.5 0.3 15
• 9/32” (7mm) mounting holes E664 304.8 38.1 15.9 13 E664 12.0 1.5 0.6 30
E665 304.8 50.8 15.9 20 E665 12.0 2.0 0.6 45
E666 304.8 63.5 15.9 27 E666 12.0 2.5 0.6 60

Ceramic Style Product Number Diameter Thickness Pull Force Style Product Number Diameter Thickness Pull Force

Pots A
METRIC
E680
mm
31.8
mm
4.8
kg
2 A
IMPERIAL
E680
in
1.25
in
0.19
lbs
4
• Ideal for retail, display or industrial Style A Style B A E681 51.6 7.9 17 A E681 2.03 0.31 38
• holding or mounting applications A E682 66.8 9.7 37 A E682 2.63 0.38 82
• Style A: Nickel Plated Pot A E683 82.6 11.2 43 A E683 3.25 0.44 95
A E2135 124.0 13.0 90 A E2135 4.90 0.50 200
• Style B: Shallow Pot With Loop
B E692 30.6 30.2 2 B E692 1.20 1.19 4
• Style C: Shallow Pot With Bolt B E693 51.6 46.0 17 B E693 2.03 1.81 38
Style C B E694 57.2 30.2 5 B E694 2.25 1.19 10
B E695 66.7 50.8 37 B E695 2.63 1.94 82
B E696 96.8 47.6 43 B E696 3.81 1.88 95
C E697 66.5 50.8 37 C E697 2.62 1.94 82
C E698 82.6 30.2 43 C E698 3.25 1.19 96

Ceramic Shallow Pots Product Number Diameter Thickness Hole Size Screw Head Pull Force Units / Pack

With Countersunk METRIC

E876
mm

25
mm

7
mm

5.5 M5
kg
4.5 10

Hole E877 32 7 5.5 M5 10.0 10

E878 40 8 5.5 M5 20.0 5
• For screw fixing
IMPERIAL in in in lbs
E876 0.984 0.276 0.217 M5 9.9 10
E877 1.260 0.276 0.217 M5 22.0 10
E878 1.575 0.315 0.217 M5 44.1 5

Ceramic Pots With Product Number Diameter Height Thickness Thread Pull Force Units / Pack
METRIC mm mm mm kg
Hooks E879-RB 25 8 34 M4 4.0 1
E880-RB 32 8 34 M4 8.0 1
• Max. operating temperature 120°C/248°F
E881-RB 36 8 34 M4 10.0 1
• Mild steel pot painted white
IMPERIAL in in in lbs
• Ideal for retail or general display
E879-RB 0.985 0.315 1.339 M4 8.8 1
• applications
E880-RB 1.260 0.315 1.339 M4 17.6 1
• For hanging graphics, utensils, E881-RB 1.417 0.315 1.339 M4 22.0 1
• tools etc

Eclipse Magnetics Innovative Magnetic Solutions 5

 Ceramic Shallow Pots Product Number Diameter Thickness Overall Height Thread Pull Force Units / Pack

With Threaded METRIC

E860
mm

10
mm

5
mm

11.0 M3
kg

0.4 20
Hole E861 13 5 11.5 M3 1.0 20
E862 16 5 11.5 M3 1.8 20
• Max. operating temperature 120°C/248°F E863 20 6 13.0 M3 3.0 10
• Mild steel pot E864 25 7 15.0 M4 4.0 10
• Zinc plated E865 32 7 15.0 M4 8.0 5

• Female thread E866 36 7 16.0 M4 10.0 5

E867 40 8 18.0 M5 12.5 5
• Ideal for mounting components with
E868 47 9 17.0 M4 18.0 1
• screw or bolt
E869 50 10 22.0 M6 22.0 1
E870 57 11 18.5 M4 28.0 1
E871 63 14 30.0 M8 35.0 1
E872 80 18 34.0 M10 60.0 1
E873 90 20 40.0 M10 70.0 1
E874 100 22 42.0 M12 90.0 1
E875 125 26 50.0 M14 130.0 1

IMPERIAL in in in lbs

E860 0.394 0.177 0.433 M3 0.9 20

E861 0.512 0.177 0.453 M3 2.2 20
E862 0.629 0.177 0.453 M3 3.9 20
E863 0.787 0.236 0.512 M3 6.6 10
E864 0.984 0.276 0.591 M4 8.8 10
E865 1.260 0.276 0.591 M4 17.6 5
E866 1.417 0.276 0.630 M4 22.0 5
E867 1.575 0.315 0.709 M5 27.5 5
E868 1.850 0.354 0.669 M4 39.6 1
E869 1.969 0.394 0.866 M6 48.4 1
E870 2.240 0.433 0.728 M4 61.6 1
E871 2.480 0.551 1.181 M8 77.0 1
E872 3.150 0.708 1.339 M10 132.0 1
E873 3.543 0.787 1.575 M10 154.0 1
E874 3.937 0.866 1.654 M12 198.0 1
E875 4.921 1.024 1.969 M14 286.0 1

Round Base Style Product

Number Diameter Thickness Hole Size Pull Force Style Product
Number Diameter Thickness Hole Size Pull Force

Magnet A
METRIC
E2100
mm

30.7
mm

4.34
mm

3.18
kg

1.8 A
IMPERIAL
E2100
in

1.21
in

0.171
in

0.125
lbs

4
Style A Style B
• Style A: Shallow Pot A E2110 36.1 7.19 4.77 7.3 A E2110 1.42 0.283 0.188 16
• Style B: Nickel Plated Pot A E2116 35.6 7.19 5.08 7.3 A E2116 1.40 0.283 0.190 16
• Style C: Shallow Pot With Thread B E2140 81.3 12.70 - 43.1 B E2140 3.20 0.500 - 95

Style C C E2115 43.2 7.62 10 UNC 5.4 C E2115 1.70 0.300 10 UNC 12

Samarium Cobalt
Samarium Cobalt Product Number Diameter Height Pull
Force Product Number Diameter Height Pull
Force

Deep Pots
METRIC mm mm kg IMPERIAL in in lbs

E750 6 20 0.8 E750 0.236 0.787 1.8

• Shell material Brass E751 8 20 2.2 E751 0.315 0.787 4.8

E752 10 20 4.0 E752 0.394 0.787 8.8
• Max. operating temperature 200°C/392°F E753 13 20 6.0 E753 0.512 0.787 13.2
• Ideal for use in jigs, assembly fixtures and E754 16 20 12.5 E754 0.630 0.787 27.5
positioning E755 20 25 23.0 E755 0.787 0.984 50.6
E756 25 35 40.0 E756 0.984 1.378 88.0
E757 32 40 60.0 E757 1.260 1.575 132.0

Samarium Cobalt Product Number Diameter Height Pull

Force
Product Number Diameter Height Pull
Force

Shallow Pots METRIC

E760
mm

6
mm

4.5
kg

0.5
IMPERIAL
E760
in

0.236
in

0.177
lbs

1.1
• Shell material Steel E761 8 4.5 1.1 E761 0.315 0.177 2.4
E762 10 4.5 2.0 E762 0.394 0.177 4.4
• Max. operating temperature 200°C/392°F
E763 13 4.5 4.0 E763 0.512 0.177 8.8
• Ideal for use in jigs, assembly fixtures and
E764 16 4.5 6.0 E764 0.630 0.177 13.2
assemblies
E765 20 6.0 9.0 E765 0.787 0.236 19.8
E766 25 7.0 15.0 E766 0.984 0.276 33.0
E767 32 7.0 22.0 E767 1.260 0.276 48.4

6 Eclipse Magnetics Innovative Magnetic Solutions

 Our Workshop range includes a variety of innovative magnetic devices for solving
challenging problems in workshops or factories. It includes simple magnetic tools
and magnetic welding clamps.

Recovery Tool Product Number Width Height Thickness Pull Force

• Constructed from a ferrite magnet METRIC mm mm mm kg

• sandwiched between two steel plates E936 80 101.5 36 50

• Designed for recovery or retrieval, IMPERIAL in in in lbs

• such as recovering objects from coolant E936 3.1 4.0 1.4 110
• tanks or vats

Tool Rack Product Number Length Height Thickness

• Contains 2 powerful magnet bars METRIC mm mm mm

• with extruded magnetic rubber lengths, EM985-R 350 33 13

• housed between two pole pieces IMPERIAL in in in

• Neatly secures and holds tools in the EM985-R 13.8 1.3 0.8
• garage or workshop and knives in the
• kitchen

Magnetic Trays Product Number Dimensions Product Number Dimensions

• Magnet in base attaches the tray firmly METRIC mm IMPERIAL in

• to ferrous surfaces and holds ferrous items E630 360.7 x 130.0 E630 14.2 x 6.3
• in the tray E631 292.1 x 271.8 E631 11.5 x 10.7
E632 241.3 x 142.2 E632 9.5 x 5.6
• Magnet base is rubber coated to
E633 149.9 D E633 5.9 D
• safeguard surfaces
E634 109.2 D E634 4.3 D

Telescopic Pick-up Product Number Length Pull Force

Tool METRIC mm kg

EM967-R 147-660 1
• Powerful neodymium iron boron magnets
IMPERIAL in lbs
• are used to ensure maximum pull from a
EM967-R 5.8-26.0 2.1
• small magnetic area
• Ideal for retrieving ferrous objects that are
• out of reach

Magnetic Sweeper Product Number Head Width Height Including Handle Pull Force

• Adjustable telescopic handles METRIC mm mm kg

MSW385 385 1050 2

• Quickly and easily clear workshop and
• factory floors, sports pitches and car parks IMPERIAL in in lbs

• of spilt items or potentially dangerous • MSW385 16.0 41.3 4.4

• metal debris like pins, nails and metal
• fragments
• Handle mounted quick release mechanism

Swarf Wand Product Number Length Collection Capacity

METRIC mm kg
• Separate small parts after rumblings
MW400 400 6.35
• Quick release handle
IMPERIAL in lbs
• Lightweight, non-rusting shaft
MW400 15.8 14.0

Sheet Floaters Product Number Width Height Depth Mounting Hole Size

• Sheet separators use magnetic repulsion • METRIC mm mm mm

• to separate sheets in a stack so they can • E913 73 76 65 M8

• be removed more easily E914 92 102 76 M8

E915 113 152 89 M10
• Sold in pairs
IMPERIAL in in in

E913 2.87 2.99 2.55 M8

E914 3.62 4.02 2.99 M8
E915 4.45 5.98 3.50 M10

Eclipse Magnetics Innovative Magnetic Solutions 7

 Magnetic Tape Product Number Width Thickness Length Pull Force Units / Pack

METRIC mm mm m g/cm3
• Material: Stronium ferrite in
EM884-R 13.0 0.50 1 28 1
• thermo-plastic binder.
FM660 7.5 0.75 10 44 1
• Max operating temperature: 80°C/176°F
FM661 12.5 0.75 10 44 1
• Magnetic on 1 face only FM662 20.0 0.75 10 44 1
• Can be cut with scissors
IMPERIAL in in ft lbs/in 3

All supplied with standard acrylic adhesive. EM884-R 0.511 0.02 3.3 1.0 1
FM660 0.295 0.03 32.8 1.6 1
FM661 0.492 0.03 32.8 1.6 1
FM662 0.787 0.03 32.8 1.6 1

Magnetic Extrusion Product Number Width Thickness Length Pull Force Units / Pack

METRIC mm mm m g/cm3
• Material: Stronium ferrite in EM880-R 9.5 3.6 2 65 1
• thermo-plastic binder FM670 9.5 3.6 10 65 1
• Max operating temperature: 80°C/176°F FM671 11 4.6 10 65 1
• Magnetic on 1 face only FM672 15 6.4 10 65 1
• Forms a strong bond when paired IMPERIAL in in ft lbs/in3
• with itself EM880-R 0.375 0.141 6.6 2.35 1
FM670 0.375 0.141 32.8 2.35 1
FM671 0.433 0.181 32.8 2.35 1
FM672 0.590 0.251 32.8 2.35 1

Print Holder Product Number Dimensions Pull Force Product Number Dimensions Pull Force

METRIC mm kg IMPERIAL in lbs

• Ceramic magnet with plastic handle
E670 25.4 x 25.4 0.9 E670 1.0 x 1.0 2
E671 60.3 x 28.6 10.4 E671 2.4 x 1.1 23
E672 60.3 x 28.6 17.3 E672 2.0 x 1.6 38
E673 76.2 x 63.5 20.4 E673 3.0 x 2.5 45

Round Holding Product Number Diameter Thickness Pull Force Product Number Diameter Thickness Pull Force

Magnet METRIC
E2600
mm

36.2
mm

7.2 7.3
kg IMPERIAL
E2600
in

1.425
in

0.283
lbs

16
• Ceramic magnet with handle E2601 50.8 8.0 11.3 E2601 2.000 0.315 25
E2602 66.7 9.5 29.5 E2602 2.625 0.374 65
E2603 81.4 10.8 43.1 E2603 3.203 0.425 95

Table-Top Product Number Voltage Width Height Depth

Demagnetiser METRIC mm mm mm

DB956CAN 110 150 117 87

• Lightweight unit for the removal of
IMPERIAL in in in
• residual magnetism from components
DB956CAN 110 5.90 4.61 3.43
• after workholding

‘V’ Blocks Product Number Width Length Height Max Clamping Forces
Top Bottom

METRIC mm mm mm kg kg
• Material Alnico 5
E934 69.85 101.6 95.25 200 150
• Ideal for holding cylindrical and complex E934MP 69.85 101.6 95.25 200 150
workpieces for marking, sparking erosion, E935 69.85 80.0 95.25 160 120
grinding, and measurement operations E935MP 69.85 80.0 95.25 160 120
• Can be used on base, side, or end IMPERIAL in in in lbs lbs

• Top ‘V’ maximum diameter 65mm/2.56” E934 2.75 4.0 3.75 440 330
• Bottom ‘V’ maximum diameter 20mm/0.79” E934MP 2.75 4.0 3.75 440 330
E935 2.75 3.2 3.75 352 264
E935MP 2.75 3.2 3.75 352 264

Chuck Blocks Product Number Width Length Height Units / Pack

METRIC mm mm mm
• Supplied in matched and numbered pairs
950 75 60 30 1 Matched Pair
• May be used vertically or horizontally
950V 100 50 40 1 Matched Pair
• Can be machined to accomodate
IMPERIAL in in in
awkward workpieces 950 2.95 2.36 1.181 1 Matched Pair
• Can be used to extend flux path of 950V 3.94 1.97 1.574 1 Matched Pair
magnetic chuck with parallel poles

8 Eclipse Magnetics Innovative Magnetic Solutions

Variable Welding Product Number Length Height Width Pull Force

Clamp METRIC
E952
mm

195
mm

200
mm

11
kg

20
• Fast accurate holding of ferrous sheets and IMPERIAL in in in lbs
• tubes for welding and assembly work E952 7.68 7.87 0.43 44
• Variable from 25° to 280°

Heavy Duty Variable Product Number Length Height Width Pull Force

Welding Clamp METRIC mm mm mm kg

E974 140 140 35 40

• Clamps components during welding,
IMPERIAL in in in llbs
• fabrication and assembly
E974 5.51 5.51 1.38 88
• Powerful 40kg/88lbs clamping force, enables
• larger components to be clamped with
• ease

90° Fixed Welding Product Number Length Height Width Pull Force

Clamps METRIC
E971
mm

140
mm

140
mm

35
kg

40
• Two magnetic faces in a rigid 90° angle for E972 225 225 22 75
• jigging on sheets, pipes and tubes E973 300 300 35 200

• A fast and cost effective means of IMPERIAL in in in lbs

• clamping components rigid at 90° angles E971 5.51 5.51 1.38 88

• during fabrication, assembly and weld E972 8.86 8.86 0.87 165
• preparation applications E973 11.81 11.81 1.38 440

Quick Holding Product Number Length Height Width Pull Force

Clamps METRIC
E951
mm

100.5
mm

65.5
mm

12
kg

10
• Fast and accurate holding of ferrous E953 100.5 65.5 20 15
• metals at different fixed angles IMPERIAL in in in lbs

• Also suitable for retrieval applications E951 3.95 2.58 0.47 22

E953 3.95 2.58 0.79 33

Adjustable Links Product Number Length

mm
Height
mm
Width
mm
Pull Force
kg

• Clamp components at any angle for METRIC mm mm mm kg

• welding and assembly applications 920SU (Single) 60 25 29 12

920 (Pair) 127 25 51 12

IMPERIAL in in in lbs

920SU (Single) 2.36 0.99 1.14 26.4

920 (Pair) 5.00 0.99 2.01 26.4

Adjustable Clamping Product Number Length

mm
Height
mm
Width
mm
Pull Force
kg

Links METRIC mm mm mm kg

920SUOT (Original Type Single) 60 25 29 12

• Clamp components at any angle for 920OTPR (Original Type Pair) 127 25 29 12
• welding and assembly applications
IMPERIAL in in in lbs

920SUOT (Original Type Single) 2.36 0.99 1.14 26.4

920OTPR (Original Type Pair) 5.00 0.99 1.14 26.4

Mitre Clamps Product Number Length Base Face Length Top Face Height Width Pull Force

METRIC mm mm mm mm kg
• Effective and inexpensive method of
923 156 66 45 43 100
• clamping flat (923) or round (924) ferrous
924 184 94 45 43 68
• components
IMPERIAL in in in in lbs

923 6.14 2.60 1.77 1.69 220.5

924 7.24 3.70 1.77 1.69 149.9

Eclipse Magnetics Innovative Magnetic Solutions 9

 Positioners Product Number Length Height Width Pull On Flat Face Pull On V Face

METRIC mm mm mm kg kg
• 2 magnetic blocks connected by 2 non
922 206.0 63.5 76.0 80 80
• magnetic steel straps
• The blocks contain ferrite magnetic IMPERIAL in in in lbs lbs

• material 922 8.11 2.50 2.99 176.4 176.4

• Magnetic on 2 faces
• On / Off switch located at each end

Earth Welding Clamp Product Number Length Height Width Pull Force Maximum Current

METRIC mm mm mm kg amps
• Quick and easy earthing for most steel
E946 193 64 90 25 800
• welding operations
IMPERIAL in in in lbs amps
• Provides earthing / ground on large
E946 7.60 2.52 3.54 55 800
• welding operations where croc-clip or
• G-Clamps cannot be easily used

Holdfasts Product Number Diameter Height Fixing Holes PCD Holes Pull Force

METRIC mm mm mm kg
• Supplied with screw release handle
E939 44.5 44.5 31.7 2 x M8 20
• Can be built into workholding, handling E940 54.0 49.2 38.1 2 x M8 40
• and assembly fixtures to provide a high E941 70.0 64.5 50.8 2 x M8 88
• clamping force and positive grip E942 101.6 74.6 69.0 3 n/a 183

IMPERIAL in in in lbs

E939 1.75 1.75 1.25 2 x M8 44

E940 2.13 1.94 1.50 2 x M8 88
E941 2.76 2.54 2.00 2 x M8 194
E942 4.00 2.94 2.72 3 n/a 403

Weld Holder Produc Number Length Height Width Pull Force

METRIC mm mm mm kg
• Provides the welder with a powerful, rigid
E925 108 140 108 100
• support on flat and round components
• at various angles during welding IMPERIAL in in in lbs

• preparation applications E925 4.25 5.51 4.25 220

Steel Plate Drag Product Number Length Height Width Vertical Pull Force

METRIC mm mm mm kg
• Used to remove steel sheets from a stack
E964 118 98 38 170
• and transport sheets to and from machines
IMPERIAL in in in lbs
• Contains powerful permanent ferrite
E964 4.64 3.86 1.49 374.8
• magnets in an aluminum housing

Pole Indicator Product Number Length Width Thickness

METRIC mm mm mm
• Shows the true north or true south pole of
MPI/100 132 22 19
• magnets
IMPERIAL in in in
• Pocket sized
MPI/100 5.19 0.87 0.75
• Battery powered - Includes 4 x 1.5v
• batteries

Magnetic Clip Product Number Size Material Colour

METRIC mm
• Neodymium magnet, plastic clip E2400 88.9 Neodymium Magnet, Plastic Clip Red

IMPERIAL in

E2400 3.5 Neodymium Magnet, Plastic Clip Red

Screwdriver Product Number Length Width Material

Magnetizer/ METRIC mm mm

Demagnetizer E2500

IMPERIAL
25.4

in
25.4

in
High-Energy Flexible

• Magnetizes and demagnetizes E2500 1.0 1.0 High-Energy Flexible

• Pass small tools through device to
magnetize

10 Eclipse Magnetics Innovative Magnetic Solutions

 Our Precision range includes magnetic bases for mounting precision measuring equipment
and magnetic chucks for machining operations. Each offer quick and easy location while
maintaining absolute accuracy.

Complete Bases & Dial not

included

Stands
• Solid holding of precision measuring
• equipment
• For use in the measurement, inspection,
• and positioning of workpieces with dial
• indicators
• All stands will clamp onto curved and flat
• surfaces, with the exception of E909
• (flat only)

E901 E903CP E905 E906 E910 E909

Product Number Product Number NA Base Part Number Switching Type Fitment Part Number Fitment Type Hold Hold
kg lbs

E901 E901 E901WF Push Button RP991BL Heavy duty with fine adjustment 80 176
E903CP E903CP E900WF Push Button RP72CP Light duty 30 66
E905 M191713ASS E905WF (M15885) Lever RP995BL Heavy duty 80 176
E906 M191712ASS E905WF (M15885) Lever RP991BL Heavy duty with fine adjustment 80 176
E910 E910 E905WF (M15885) Lever RP999 Mechanical one piece 80 176
E909 E909 834 Non-switchable RP909FIT One pillar 14 31

Magnetic Bases With Product Number Length Height Width Hole Hold

Push Button Switch METRIC

E900WF
mm

48
mm

52
mm

40 M8
kg

30
• Eclipse Magnetics bases can be attached E901WF 64 76 64 M8 80
• to any ferrous surface to provide a rigid IMPERIAL in in in lbs
• support E900WF 1.890 2.047 1.575 M8 66
• 4 magnetic faces E901WF 2.519 3.000 2.519 M8 176

Magnetic Bases With Product Number Product Number NA Length Height Width Hole Hold

Toggle Switch METRIC

E905WF M15885
mm

65
mm

55
mm

50 M8
kg

80
• 3 magnetic faces: Top, Bottom, Back E905WF/100 M19290 75 55 50 M8 100

IMPERIAL in in in lbs

E905WF M15885 2.559 2.165 1.969 M8 176

E905WF/100 M19290 2.953 2.165 1.969 M8 220

Fitment Stands Product Number Pillar Height Pillar Diameter Crossbar Length Crossbar Diameter Screw Fixing

For Bases METRIC

RP72CP
mm

185
mm

12.5
mm

150
mm

6.3 M8
RP991BL 175 12.0 165 10.0 M8
RP995BL 175 12.0 165 10.0 M8
IMPERIAL in in in in

RP72CP 7.28 0.492 5.90 0.250 M8

RP991BL 6.89 0.472 6.50 0.394 M8
RP995BL 6.89 0.472 6.50 0.394 M8

Product Number Maximum Extension Height Screw Fixing

METRIC mm
RP999 RP72CP RP991BL RP995BL
RP999 295 M8
IMPERIAL in

RP999 11.6 M8

Eclipse Magnetics Innovative Magnetic Solutions 11

 Premier Range Magnetic Chucks

Premier Range chucks provide Eclipse Magnetics invented the first permanent magnet chuck in 1934
and we continue to set the benchmark for quality workholding with
precision performance and durability today's Premier Range.

Rectangular Product Number Length Height Width Pole Pitch Weight

• Unique top plate concentrates magnetic energy on to the chuck face METRIC mm mm mm kg

• The all-metal top plate is extra thick to ensure accuracy after AX47/P 203 42 127 17.6 8.2
AX510/P 276 53 129 35.0 16.0
frequent re-grinding
AXS612/P 322 63 151 32.0 22.0
• Chrome plated side and end stops for packing and positioning
AXS614/P 360 63 151 32.0 22.0
• The chucks can be partially magnetized to allow part positioning AXS618/P 451 63 151 32.0 36.0
• Removable, ergonomically designed handles allow easy switching AXM824/P 601 63 201 35.0 56.0

IMPERIAL in in in lbs

AX47/P 7.99 1.65 5.00 17.6 18.1

AX510/P 10.87 2.09 5.08 35.0 35.3
AXS612/P 12.68 2.48 5.95 32.0 48.5
AXS614/P 14.17 2.48 5.95 32.0 48.5
AXS618/P 17.76 2.48 5.95 32.0 79.4
AXM824/P 24.53 2.48 7.91 35.0 101.4

Circular Product Number A B C D E F G Weight

• Unique top plate concentrates magnetic energy on to the chuck face METRIC mm mm mm mm mm mm mm kg
• The chucks can be partially magnetized to aid the correct positioning AX475C/P 121 45 51 6.5 76 M6 102 4
of the workpiece AX651C/P 165 60 76 6.5 102 M10 140 10

• Grooved rings in the top plate assist in visual positioning to aid quick AX91C/P 229 60 86 6.5 114 M10 191 20

changeover AX12C/P 305 72 152 5.0 184 M12 254 46

• Excellent for holding thin ring-shaped components that can be subject IMPERIAL in in in in in in in lbs

to radial distortion AX475C/P 4.75 1.77 2.00 0.26 3.00 M6 4.02 8.8
AX651C/P 6.50 2.36 3.00 0.26 4.00 M10 5.51 22.0
AX91C/P 9.00 2.00 3.39 0.26 4.50 M10 7.52 44.1
AX12C/P 12.00 2.83 5.98 0.19 7.25 M12 10.00 101.4

Radial Pole No. Of

Product Number A B C D E F G H I Weight
Poles
• Dynamically balanced to enable use at high RPM
METRIC mm mm mm mm mm mm mm mm mm kg
• All metal top plate and a rugged industrial build ensures accuracy NR100C 100 48 51 6 N/A M6 76 N/A N/A 6 3.1
and longevity NR150C 150 69 76 4 N/A M10 102 32 36 10 8.8
• Through-bored (except NRC100C) allows through-flushing of coolant NR225C 225 71 86 5 114 M10 191 50 54 14 18.5
during machining NR300C 300 71 152 5 184 M12 254 62 66 18 40.0
• Optional centre plug available IMPERIAL in in in in in in in in in lbs

NR100C 3.94 1.89 2.00 0.24 N/A M6 3.00 N/A N/A 6 6.8
NR150C 5.90 2.72 3.00 0.16 N/A M10 4.02 1.42 1.42 10 19.4
NR225C 8.86 2.80 3.38 0.19 4.48 M10 7.52 2.13 2.13 14 40.8
NR300C 11.81 2.80 5.98 0.32 7.24 M12 10.00 2.60 2.60 18 88.2

12 Eclipse Magnetics Innovative Magnetic Solutions

 Standard Range Magnetic Chucks
• Brass and steel top plates
Standard Range chucks provide high • All chucks are supplied with side and end stops, and with clamps
• Removable hexagon key handles ensure ease of operation
performance at a competitive price • through a 180 degree arc
• Clamping force: 80N/cm2

Standard Pole Fine Pole

Pole Spacing: 4.0mm/0.157” steel - 2.0mm/0.079” brass Pole Spacing: 1.5mm/0.060” steel - 0.5mm/0.020” brass
Effectively clamps all workpiece thicknesses down to 3mm/0.188” Ideal for small workpieces less than 3mm/0.188” in height

Rectangular Product Number

Length Width Height Weight
Standard Fine
METRIC mm mm mm kg

ERSP1018 ERFP1018 180 100 50 9.5

ERSP1325 ERFP1325 255 130 50 15.0
ERSP1530 ERFP1530 300 150 50 20.5
ERSP1535 ERFP1535 350 150 50 23.5
ERSP1545 ERFP1545 450 150 50 30.0
ERSP2060 ERFP2060 600 200 50 52.0

IMPERIAL in in in lbs

ERSP1018 ERFP1018 7.09 3.94 1.96 20.9

ERSP1325 ERFP1325 9.84 5.12 1.96 33.1
ERSP1530 ERFP1530 11.81 5.90 1.96 45.2
ERSP1535 ERFP1535 13.78 5.90 1.96 51.8
ERSP1545 ERFP1545 17.72 5.90 1.96 66.1
ERSP2060 ERFP2060 23.62 7.87 1.96 114.6

Circular Product Number

A B C D E F G Weight
Standard Fine
METRIC mm mm mm mm mm mm mm kg

ECSP100 ECFP100 100 50 50.8 6.35 76.2 M6 N/A 6.0

ECSP125 ECFP125 125 50 50.8 6.35 76.2 M6 101.6 9.4
ECSP160 ECFP160 160 50 76.2 6.35 101.6 M10 139.7 13.5
ECSP195 ECFP195 195 50 76.2 6.35 101.6 M10 139.7 18.0
ECSP255 ECFP255 255 50 85.7 6.35 114.3 M10 190.5 22.5
ECSP310 ECFP310 310 50 152.4 6.35 184.1 M12 254.0 32.0
ECSP350 ECFP350 350 50 196.8 6.35 234.9 M12 N/A 40.0

IMPERIAL in in in in in in in lbs

ECSP100 ECFP100 3.94 1.96 2.00 0.25 3.00 M6 N/A 13.2

ECSP125 ECFP125 4.92 1.96 2.00 0.25 3.00 M6 4.00 20.7
ECSP160 ECFP160 6.30 1.96 3.00 0.25 4.00 M10 5.50 29.8
ECSP195 ECFP195 7.68 1.96 3.00 0.25 4.00 M10 5.50 39.7
ECSP255 ECFP255 10.00 1.96 3.37 0.25 4.50 M10 7.50 49.6
ECSP310 ECFP310 12.20 1.96 6.00 0.25 7.25 M12 10.0 70.5
ECSP350 ECFP350 13.77 1.96 7.75 0.25 9.25 M12 N/A 88.2

Eclipse Magnetics Innovative Magnetic Solutions 13

 Our range of magnetic lifters are based on failsafe magnetic technology which provides
highly efficient and totally safe lifting.

3 Patented Safety Features

• Locking switch handle mechanism
• Unique 'Safety Shim' - Pre-test any load to ensure
a 3:1 safety factor
• Locking eye mechanism - Magnet cannot be
switched off while holding a load

Magnetic lifters are quicker, easier

and safer to use than slings, chains,
hooks and grabs, and do not mark
the load.
Onboard switching and permanent magnet technology mean
installation and operation could not be easier and running costs
are non-existent. Access is only required to the load's top face,
allowing for more efficient storage and handling.

A
3:1 Safety Factor
The patented 'safety shim' allows
pre-testing of the load to be lifted
B irrespective of weight, material,
thickness and surface condition.

C
E D

Dimensions Flat Section Round Section

Material Length Max.
Product Number Product Number UK Self Weight A B C D E F SWL* Thickness Min. SWL* Diameter Max
IMPERIAL METRIC in in in in in in in in lbs in lbs in

UL0275+ UL0125+ 8.8 2.5 2.9 4.0 6.1 2.7 6.0 60 275 0.8 110 8

UL0550+ UL0250+ 24.2 3.7 3.8 6.1 8.4 3.6 8.6 60 550 1.0 220 12

UL1100+ UL0500+ 59.4 4.8 5.0 8.8 11.8 4.8 10.5 80 1100 1.2 440 16

UL2200+ UL1000+ 138.6 5.5 6.9 10.2 14.1 6.9 15.4 120 2200 1.8 880 18
UL4400+ UL2000+ 345.4 7.7 8.9 14.5 18.8 9.2 19.4 120 4400 2.8 1760 24
*Safe working load

14 Eclipse Magnetics Innovative Magnetic Solutions

UltraLift LM F
Safe general-purpose lifting
• Lifts up to 4400 lbs (flat) 1760lbs (round) A
• Locking switch handle safety mechanism

Dimensions Material Flat Section Round Section

Length
Product Number Product Number UK Self Weight A B C D E F Max SWL* Thickness Min. SWL* Diameter Max

IMPERIAL METRIC lbs in in in in in in in lbs in lbs in

LM0275 LM0125 9.9 2.1 2.4 4.3 5.9 3.0 5.9 60 275 0.8 110 10

LM0550 LM0250 18.7 3.0 2.8 6.5 8.3 3.5 7.9 60 550 1.0 220 12

LM1100 LM0500 38.5 4.1 3.5 8.9 11.1 4.2 9.6 80 1100 1.2 440 16

LM2200 LM1000 80.3 4.4 4.1 12.8 15.4 5.4 14.4 120 2200 1.8 880 18 C
LM4400 LM2000 173.8 6.7 5.2 15.7 19.0 7.3 20.7 120 4400 2.8 1760 24
D
*Safe working load

UltraLift TP F
Thin Plate Lifter
• Lifts up to 880lbs (flat) A
• Specifically designed for the safe lifting of thin plate
• and pressings B
• Can lift single sheets from the tops of stacks
• Locking switch handle safety mechanism
E

Material Thickness
Dimensions
0.20 in 0.25 in 0.30 in 0.40 in
Self
Product Number Product Number UK A B C D E F SWL* Length SWL* Length SWL* Length SWL* Length
Weight
IMPERIAL METRIC lbs in in in in in in lbs in lbs in lbs in lbs in
C
TP330 TP150 18 3 3 6 8 4 7 165 60 220 60 330 60 440 60

TP660 TP300 33 3 3 12 14 4 7 330 80 440 80 660 80 880 80 D

*Safe working load

Service and Maintenance

Full inspection and certification
• Free inspection and quotation
• Certificate of performance for magnetic lifters to satisfy H & S audits
• Spare parts available
*All lifting systems should be serviced every 12 months by a competant person. Our fully trained personnel provide a

full inspection and certification service. Please refer to manual guidelines for inspection requirements.

For more details, call us at 1-800-260-2124

Eclipse Magnetics Innovative Magnetic Solutions 15

 A high performance range of electromagnets for design engineering projects, e.g. access
control systems, medical devices, hold and release automation systems, and machine
guards.

Energize to Hold Power required to turn magnet ON. Power removed to turn magnet OFF.
• Sturdy bright nickel plated cylinder, passivated with body
• mounting
• High-quality permeable iron for low remanence
• Armature plates to suit

Operating Voltage 12VDC & 24VDC

Connector Options Flying leads, two-pole connector
Mounting Threaded holes in magnet rear face
25, 30mm diameter. Free leads (500mm long) 40, 50, 65, 80, 100mm diameter.
Finish Bright nickel plated with machined face Leads: 1 red, 1 black. 0.3mm square x 500mm long) 12VDC & 24VDC. Two pole connector

ED Rating 100%
IP Rating 54 (20 for the two-pole connector)
Standard Operating Voltage D L a b c d1 d2 PCD Pull at Zero Air Gap

24VDC Current 12VDC Current

METRIC mA mA
mm mm mm mm mm mm kg
Product Number Product Number

25 M52172/24VDC 90 M52172/12VDC 180 25 20 - - - M4 M3 15 11.3

30 M52173/24VDC 140 M52173/12VDC 280 30 24 - - - M5 M3 18 25.3
Diameter
mm
40 M52174/24VDC 230 40 27 16 13 19 M5 M4 26 57.5
50 M52175/24VDC 240 50 30 16 13 19 M5 M4 34 109.7
65 M52176/24VDC 340 60 35 16 13 19 M8 M5 40 167.7

24VDC Current 12VDC Current

IMPERIAL mA mA
in in in in in in lbs
Product Number Product Number

0.984 M52172/24VDC 90 M52172/12VDC 180 0.984 0.787 - - - M4 M3 0.590 24.9

1.181 M52173/24VDC 140 M52173/12VDC 280 1.181 0.945 - - - M5 M3 0.709 55.8
Diameter
in
1.575 M52174/24VDC 230 1.575 1.063 0.62 0.51 0.74 M5 M4 1.023 126.8
1.969 M52175/24VDC 240 1.969 1.181 0.62 0.51 0.74 M5 M4 1.339 241.9
2.559 M52176/24VDC 340 2.559 1.378 0.62 0.51 0.74 M8 M5 1.575 369.8

Energize to Release Power required to turn magnet OFF. Power removed to turn magnet ON.
• Sturdy bright nickel plated cylinder, passivated with body
• mounting b

• High-quality permeable iron for low remanence connector

• Armature plates to suit

d1
W
Operating Voltage 24VDC (with rectified plug connector)
Connector Options Hirschman connector
Mounting Central machined hole in rear face of magnet
L D
Finish Bright nickel plated with machined face
IP Rating 54
Duty Cycle S2
Standard Operating Voltage D W L b d1 Pull at Zero Air Gap

24VDC Current
METRIC mA
mm mm mm mm kg
Product Number

35 M52177/24VDC 240 35 78 48 50 M5 28.5

Diameter
mm 50 M52178/24VDC 350 50 94 63 50 M5 47.1

24VDC Current
IMPERIAL mA
in in in in lbs
Product Number

1.378 M52177/24VDC 240 1.378 3.070 1.890 1.968 M5 62.8

Diameter
in 1.968 M52178/24VDC 350 1.968 3.700 2.480 1.968 M5 103.8

Armature Plates Product Number Diameter Height Screw Product Number Diameter Height Screw

• To fit both types METRIC mm mm IMPERIAL in in

M52171/25ARM 25 3 M3 M52171/25ARM 0.984 0.118 M3

M52171/30ARM 30 4 M4 M52171/30ARM 1.181 0.157 M4
M52171/40ARM 40 5 M4 M52171/40ARM 1.575 0.197 M4
M52171/50ARM 50 6 M4 M52171/50ARM 1.969 0.236 M4
M52171/65ARM 65 8 M5 M52171/65ARM 2.559 0.315 M5
To achieve the optimum pull force, 100% contact area must be achieved using the recommended armature plate. The force will be affected if other material specifications, thickness and surfaces are used, or if the armature fails to make
positive contact over the full diameter of the face of the magnet. Where misalignment is likely to be an issue we recommend that an oversized armature plate is used to ensure 100% full contact, this however will reduce the stated pull force by
approximately 10%

16 Eclipse Magnetics Innovative Magnetic Solutions

 Guide To Magnet Materials

When choosing a magnet material for an

application you should take the following factors
into consideration:
• Flux requirement of the application
• Maximum operating temperature
• Likely exposure to corrosive conditions
• Magnetic stability
• Size and weight limitations

What strength/flux of magnet do you need?

Magnet Max Energy Product: Max Energy Product: Flux
Material CGS SI Density
This table shows the comparative magnetic strengths of the same volume of the four
Ferrite 3.3 MGOe 26 Kj/m3 1000 Gauss
main magnet materials in terms of their maximum energy products (BHmax) in CGS or SI
units and their typical pole face flux densities. Alnico 5.2 MGOe 42 Kj/m3 1300 Gauss

Neodymium is the most powerful magnet material available. It is ideal for applications Samarium Cobalt 26 MGOe 208 Kj/m3 3500 Gauss

where high flux density is required or where space is at a premium.

Neodymium 35 MGOe 279 Kj/m3 4500 Gauss

What temperature will the magnet be operating in?

In most applications, operating temperature is not a consideration but extreme
temperatures will have an effect on the magnetic performance.

Each material has different temperature characteristics and these must be reviewed to
ensure that the correct material is used for the application. Using the wrong material
could lead to loss in magnetic performance.

Other Factors To Consider

Corrosion
Another potential cause of performance loss is a breakdown of the magnet's composition Magnet Corrosion Resistance Resistance To
due to corrosive environmental effects. This table shows relative corrosive resistance for Material Uncoated Demagnetisation

each material when uncoated. As neodymium's corrosive resistance is poor it is usually Ferrite Excellent High
sold with a protective coating, normally either nickel or zinc.
Alnico Fair Low

External Demagnetising Fields / Magnet Stability Samarium Cobalt Excellent Very High

Temperature has the greatest effect on magnet stability but high external magnetic fields
Neodymium Poor Very High
can influence performance. This table shows the relative demagnetising effect on each
material.

Please note, this guide provides general information only.

For specific information please contact us at 1-800-260-2124

Eclipse Magnetics Innovative Magnetic Solutions 17

In addition to the products in this catalogue, Eclipse Magnetics are
innovators in other fields:

Contamination Removal Systems

Full range of products and services to protect all process lines
and products from foreign body contamination.
■ Magnetic separators
■ Vibratory sieves
■ Metal detectors
■ Site audits

Magnetic Filtration Systems

Highly efficient magnetic systems for removing ferrous contamination from
industrial fluids such as coolants, oils, and lubricants.

PATENT PENDING
+ PATENTIERT
PATENTED

Ultimate Filtration Technology

Material Handling And Workholding

Extensive range of products that improve safety and increase efficiency
when lifting, holding, moving or clamping ferrous materials, workpieces,
tools, and components.

BoilerMag
Magnetic filters for removing ferrous oxide contamination from industrial
heating systems.

Ultimate Heating System Protection

Eclipse Tools North America Inc.

442 Millen Road, Unit 9 | Stoney Creek | ON L8E 6H2
 1-800-260-2124  1-800-260-1410  www.eclipsemagnetics.com/na  [email protected]
While every effort has been made to ensure the accuracy of the information within this publication, please note that specifications may change without notice.

Eclipse Magnetics Innovative Magnetic Solutions