Scribd
Upload
689 views

Complete Reset Tutorial For RT6, e-MyWay p4 PDF

Reassemble the RT6/e-MyWay device in the vehicle. Insert a USB drive with firmware version 2.86B into the device's USB port, reconnect the battery, and start the vehicle. The flash process will take approximately 30 minutes and requires keeping the engine running. Reload maps with the engine running, as assembly is now complete.

Uploaded by

Nemanja Boric
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
689 views

Complete Reset Tutorial For RT6, e-MyWay p4 PDF

Reassemble the RT6/e-MyWay device in the vehicle. Insert a USB drive with firmware version 2.86B into the device's USB port, reconnect the battery, and start the vehicle. The flash process will take approximately 30 minutes and requires keeping the engine running. Reload maps with the engine running, as assembly is now complete.

Uploaded by

Nemanja Boric
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

8- Put the card in its slot and proceed in the reverse order of disassembly (no formatting is

necessary).

9- Reassemble the RT6/e-MyWay in the vehicle.

10- Prepare a USB drive with the firmware 2.86B, insert the drive in the USB port,
reconnect the battery and start the vehicle. The flash process will take about 30min (it is
imperative to keep the engine running). A tutorial already exists to generate this key.

There, it's finished.

11- It only remains to reload all the maps (or only the ones that you are interested in) with
the motor running.

You might also like