Scribd
Upload
47 views1 page

Retainer 1060476 - Caterpillar d10t

This document provides information and specifications for retaining parts for Caterpillar engines D10R, D10T, and D10T2. It includes illustrations and tables specifying part numbers, quantities, tightening specifications like torque values and sequences for items like studs, bolts, check valves, and jam nuts used in valve actuator groups and taperlock studs. Torque values range from 221-53 to 48-7 lb in or 6-1 to 65-10 Nm.

Uploaded by

graha network
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views1 page

Retainer 1060476 - Caterpillar d10t

This document provides information and specifications for retaining parts for Caterpillar engines D10R, D10T, and D10T2. It includes illustrations and tables specifying part numbers, quantities, tightening specifications like torque values and sequences for items like studs, bolts, check valves, and jam nuts used in valve actuator groups and taperlock studs. Torque values range from 221-53 to 48-7 lb in or 6-1 to 65-10 Nm.

Uploaded by

graha network
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1060476 RETAINER Caterpillar parts D10R, D10T, D10T2 RETAINER

Alternative (cross code) number:


CA1060476
106-0476

1060476

Information:

Illustration 1 g03364103
Typical example
Table 1
Specification for 345-4072 Valve Actuator Gp and 345-4073 Valve Actuator Gp
Item Qty Part Specification Description
1 6 304-9553 Stud Torque to 50 5 N m (37 4 lb ft).
Turn the studs by an additional angle of 45 5 degrees.
2 4 356-5212 Bolt Use the following procedure for tightening sequence:
1. Tightening to the bolt in numerical sequence of 2,3,1,4 to 50 5 N m (37 4 lb ft).
2. Turn the bolts by an additional angle of 45 5 degrees.
3 2 8T-7062 Taperlock Stud Torque to 65 10 N m (48 7 lb ft).
Illustration 2 g03364107
Tightening sequence
Table 2
Item Qty Part Specification Description
- - - Torque the nuts in the numerical sequence that is shown in Illustration 2.
Illustration 3 g03364108
Valve Actuator
Table 3
Item Qty Part Specification Description
4 2 230-9425 Check Valve Gp Torque to 25 6 N m (221 53 lb in).
5 2 230-9447 Jam Nut Torque to 6 1 N m (53 9 lb in).
6 2 236-5958 Bolt Torque to 6 1 N m (53 9 lb in).

You might also like