Scribd
Upload
75 views

Foundation Design

This document provides the design of the foundation for an office complex building including: - Details of the footing design such as dimensions, reinforcement, and load calculations - Specifications for the columns supported by the footings - Checks that the footing design meets requirements for shear strength, moment capacity, and reinforcement spacing - Design of the footing supports the axial and moment loads from the columns as calculated by the STAAD analysis software

Uploaded by

DEBASIS BARMAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
75 views

Foundation Design

This document provides the design of the foundation for an office complex building including: - Details of the footing design such as dimensions, reinforcement, and load calculations - Specifications for the columns supported by the footings - Checks that the footing design meets requirements for shear strength, moment capacity, and reinforcement spacing - Design of the footing supports the axial and moment loads from the columns as calculated by the STAAD analysis software

Uploaded by

DEBASIS BARMAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

Title Design of Foundation for Office Complex Building Annexure:

Z
Filename: 'file:///conversion/tmp/scratch/491043493.xls'#$Footing Design Sheet No. 1
B

Client: GMR Bajoli Holi Hydro Power Pvt. Ltd.


Designed: Mohit Singla Bajoli Holi H.E.P. Doc. No.
Project:
(180 MW) Date: 20/09/2014 Rev. : 00
Milan Office Complex X L X
Checked: Structure: Component: Foundation Design
Bandyopadhyay Building

General Data
fck Depth of top of footing
Charcterstic 25 N/mm2 2.2 m
from ground
Strength
fy 500 N/mm 2
Safe Bearing Capacity 200 kN/m2
Unit wt. of Soil fill 20 kN/m3 Xu.max/d 0.53 For Column No. 40 & 97 Combined Footing is Provided
Z
Clear Cover to Fdn. 60 mm For Column No. 52 & 100 Combined Footing is Provided

Columns
Sr. No. Description Units
Type (F1)

Column Reactions from STAAD Pro (Consultant Design)


1 Width of Pedestal m 0.30
2 Depth of Pedestal m 0.30
3 Axial Load (Fy) kN 24.35
4 Moment (Mx) kN-m 40.00
5 Moment (Mz) kN-m 0.00
Details of Footing
8 Overall thickness provided m 0.30
9 Effective thickness provided m 0.24
10 Total Weight for Design kN 99.50
11 Section Modulus X axis m 3
0.29
12 about Z axis m3 0.29
13 Area of footing required m2 0.50
14 Width of Footing m 1.20
15 Length of Footing m 1.20
16 Area of footing provided m2 1.44
17 Pressure along X Max. Mpa 0.21
18 at base of footing Min. Mpa -0.07
19 Pressure along Z Max. Mpa 0.07
20 at base of footing Min. Mpa 0.07
Reinforcement Design of Footing
Along X axis
19 Dia of Bar mm 10
20 Pressure at face of column Mpa 0.10
21 BM at face of column kN-m 21.07
22 Area of Steel required mm2 479.40
23 Required 190
Spacing of bars m
24 Provided 150
25 Area of Steel provided mm2 523.60
Along Z axis
26 Dia of Bar mm 10
27 Pressure at face of column Mpa 0.07
28 BM at face of column kN-m 8.40
29 Area of Steel required mm2 479.40
30 Required 190
Spacing of bars m
31 Provided 150
32 Area of Steel provided mm2 523.60
Design Check
Oneway Shear Check
33 Shear Force at critical section kN 53.66
34 Shear Stress MPa 0.19
35 Permissible Stress MPa ###
Twoway Shear Check
36 Punching Shear Force kN 239.97
37 Shear Stress MPa 0.48
38 Permissible Stress MPa 1.25
Sr. Col. Staad Data Eccentric Moment
fck fy XD ZD Length Cover
No. No. Pu Mx Mz Mx
1 1 25 500 300 300 2000 60 26.975 41.22 0 0.54
Eccentric Moment Design Moment Moment Capacity (Z Axis) Moment Capacity (X Axis)
Mz Mx Mz pt pt/fck d'/D f1 f2 Muz1 d'/D f1 f2 Mux1
0.54 41.22 0.54 1.20% 0.048 0.20 0.01 0.07 47.3 0.2 0.01 0.07 47.25
Muz/
Puz a IR Check
Muz1
1405.4 1.00 0.13 0.88 OK

You might also like