0% found this document useful (0 votes)
248 views

ETABS 2016 Steel Frame Design: ETABS 2016 16.2.1 License # 1SRAL4HSLYXM7Q8

The document summarizes the results of an ETABS analysis of a steel frame element designated B7 at level Story1. It includes details of the element's section properties, material properties, design code parameters, and results of checks for axial force, bending moment, shear, and torsion according to IS 800:2007. The element passes all stress checks with demand to capacity ratios less than 1.0.

Uploaded by

er.praveenraj30
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
248 views

ETABS 2016 Steel Frame Design: ETABS 2016 16.2.1 License # 1SRAL4HSLYXM7Q8

The document summarizes the results of an ETABS analysis of a steel frame element designated B7 at level Story1. It includes details of the element's section properties, material properties, design code parameters, and results of checks for axial force, bending moment, shear, and torsion according to IS 800:2007. The element passes all stress checks with demand to capacity ratios less than 1.0.

Uploaded by

er.praveenraj30
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ETABS 2016 16.2.

1 License #*1SRAL4HSLYXM7Q8

ETABS 2016 Steel Frame Design


IS 800:2007 Steel Section Check (Strength Summary)

Element Details (Part 1 of 2)


Level Element Unique Name Location (mm) Combo Design Type Element Type Section
Story1 B7 103 3925 UDStlS18 Beam Special Moment Frame ISHB150-1

Element Details (Part 2 of 2)


Classification Rolled
Class 2 Yes

Seismic Parameters
MultiResponse P-Δ Done? Ignore Seismic Code? Ignore Special EQ Load? D/P Plug Welded?
Envelopes No No No Yes

Design Code Parameters


ɣM0 ɣM1 An /Ag LLRF PLLF Stress ratio Limit
1.1 1.25 1 1 0.75 0.96

Section Properties
A (cm²) Izz (cm⁴) rzz (mm) Ze,zz (cm³) Av,z (cm²) Zp,zz (cm³) Iyz (cm⁴) It (cm⁴)
34.5 1455.6 65 194.1 27 194.1 0 8

J (cm⁴) Iyy (cm⁴) ryy (mm) Ze,yy (cm³) Av,y (cm²) Zp,yy (cm³) Iw (cm⁶) h (mm)
8 431.7 35.4 57.6 8.1 57.6 25161.9 150

Material Properties
J (cm⁴) Iyy (cm⁴) ryy (mm)
8 431.7 35.4

E (MPa) fy (MPa) fu (MPa)


210000 345 450

Stress Check Message - Section is not Class 1 (Plastic) (IS 12.8.4.1, 12.8.2.5, 12.11.3.1 )

TRIAL46INCHCOLUMN.EDB Page 1 of 3 8/8/2018


ETABS 2016 16.2.1 License #*1SRAL4HSLYXM7Q8

Stress Check Forces and Moments


Location (mm) N (kN) Mzz (kN-m) Myy (kN-m) Vy (kN) Vz (kN) To (kN-m)
3925 -1.1003 -8.4042 0.0063 50.4072 0.0015 0.0041

PMM Demand/Capacity (D/C) Ratio 9.3.2.2(a)


D/C Ratio = P / Pdy + Ky * Cmy * (My,span / Mdy; ) + KLT *
(Mz,span / Mdz; )
0.944 = 0.001 + 1.708E-04 + 0.943

Basic Factors
Buckling Mode K Factor L Factor L Length (mm) KL/r
Major (z-z) 1 0.963 3850 59.255
Major Braced 1 0.963 3850 59.255
Minor (y-y) 1 0.25 1000 28.261
Minor Braced 1 0.25 1000 28.261
LTB 1 0.25 1000 28.261

Axial Force Design


N Force Td Capacity Nd Capacity Pdy Capacity Pz Capacity Pd Capacity
kN kN kN kN kN kN
Axial -1.1003 1081.4182 1081.4182 990.447 806.8316 806.8316

Tdg Tdn Ncr,T Ncr,TF An /Ag N /Nd


kN kN kN kN Unitless Unitless
1081.4182 1117.152 10705.6696 10705.6696 1 0.001

Design Parameters for Axial Design


Curve α fcc (MPa) λ Φ χ fcd (MPa)
Major (z-z) b 0.34 590.3 0.764 0.888 0.746 234
MajorB (z-z) b 0.34 590.3 0.764 0.888 0.746 234
Minor (y-y) c 0.49 2594.98 0.365 0.607 0.916 287.25
MinorB (y-y) c 0.49 2594.98 0.365 0.607 0.916 287.25
Torsional TF c 0.49 3104.89 0.333 0.588 0.932 292.33

Moment Designs
M Moment Mspan Moment Md(yield) Capacity Mdv Capacity Mnd Capacity Md(LTB) Capacity
kN-m kN-m kN-m kN-m kN-m kN-m
Major (z-z) -8.4042 -56.2275 60.8768 60.8768 60.8768 59.6421
Minor (y-y) 0.0063 0.0035 18.0655 18.0655 18.0655

Curve αLT λLT ΦLT χLT C1 Mcr (kN-m)


LTB a 0.21 0.29 0.552 0.98 1.096 793.8829

Cmy Cmz CmLT kz ky KLT My / Mdy Mz / Mdz α1 α2


Factors 0.878 0.532 0.9 1.001 1 1 3.471E-04 -0.138 1 2

Shear Design
V Force (kN) Vd Capacity (kN) To Capacity (kN-m) Stress Ratio Status Check
Major (y) 50.4072 146.6731 0.0041 0.344 OK
Minor (z) 0.0015 488.9105 0.0041 0 OK

TRIAL46INCHCOLUMN.EDB Page 2 of 3 8/8/2018


ETABS 2016 16.2.1 License #*1SRAL4HSLYXM7Q8

Shear Design
Vp (kN) kv (Unitless) ΛW (Unitless) Τb (MPa)
Reduction 146.6731 0 0 1

End Reaction Major Shear Forces


Left End Reaction (kN) Load Combo Right End Reaction (kN) Load Combo
79.5906 UDStlS22 67.539 UDStlS22

TRIAL46INCHCOLUMN.EDB Page 3 of 3 8/8/2018

You might also like