Scribd
Upload
184 views

Eng Mech Lesson 1-2 PDF

Engineering mechanics describes the conditions of rest or motion of bodies under forces. It is divided into statics and dynamics. Statics studies forces on bodies at rest, while dynamics studies moving bodies and divides further into kinematics (motion without forces) and kinetics (effects of unbalanced forces on accelerated motion). A force system can be either coplanar (lying in a plane) or spatial (three-dimensional). For coplanar systems, forces are resolved into perpendicular rectangular components and the resultant found using the component method. For spatial systems, forces are resolved into three perpendicular rectangular components along x, y and z axes. The magnitude and direction angles of forces can be determined from their rectangular components.

Uploaded by

Alliza Kaye Casulla
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
184 views

Eng Mech Lesson 1-2 PDF

Engineering mechanics describes the conditions of rest or motion of bodies under forces. It is divided into statics and dynamics. Statics studies forces on bodies at rest, while dynamics studies moving bodies and divides further into kinematics (motion without forces) and kinetics (effects of unbalanced forces on accelerated motion). A force system can be either coplanar (lying in a plane) or spatial (three-dimensional). For coplanar systems, forces are resolved into perpendicular rectangular components and the resultant found using the component method. For spatial systems, forces are resolved into three perpendicular rectangular components along x, y and z axes. The magnitude and direction angles of forces can be determined from their rectangular components.

Uploaded by

Alliza Kaye Casulla
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

Overview

 Engineering Mechanics is the science which describes the conditions of rest or


motion of bodies under the action of forces.
 It is divided into two parts; statics and dynamics.
 Statics is the study of the effects of forces on bodies at rest or in a state of uniform
motion.
 Dynamics is the study of particles and bodies in motion.
 It is divided into kinematics and kinetics.
 Kinematics is the study of motion without reference to the forces which cause the
motion.
 Kinetics is the study of the effects of unbalanced forces on the motion of bodies
which have accelerated motion.
 Force, distance, time and mass are the fundamental quantities involved in the study
of engineering mechanics.
 The free-body diagram (FBD) is an aid or tool used in the analysis of problems in
engineering mechanics.
 It usually shows a body or its part isolated from physical contact with other bodies,
drawn together with all the forces acting on it and the applicable axes.

Objectives
At the end of the semester, the student must be able to:
1. Explain the principles of: 3D forces, static, wedge, and belt friction
2. Determine the centroids, centers of mass and gravity of objects, moment and
mass moment of inertia
3. Explain the principle of Newton’s 2nd Law of Motion and its applications
4. Explain the kinetics of particles in particular energy and momentum methods

Mechanics
 This instructional material is primarily designed for 2nd year engineering students
particularly the chemical and the geodetic engineering students of the Bicol
University College of Engineering taking up BES 14 Engineering Mechanics course.
 To meet the objectives of the material, students must observe the following:
1. Read and analyze carefully the introduction and objectives of each lesson.
2. Take the self-assessment test or the pretest to assess the level of knowledge
and analysis.
3. Check the answers from the answer key and interpret the results based on the
equivalent point-scores earned.
4. Read and analyze carefully the content or the lesson proper.
5. Take the post test to determine what has been learned and whether to proceed
to the next lesson.
6. If unable to get the allowable point-score, reread, restudy the lesson and ask
guidance from course professor.

CHAPTER 1: Concurrent Spatial Force Systems


 This chapter deals only with a concurrent spatial force system in which the lines of
action of all the forces in the system act through a common point.
 Topics covered in this chapter include review of two-dimensional coplanar force
systems, rectangular components of a spatial force, force acting through two points,
resultant of a concurrent spatial force system and equilibrium of a concurrent spatial
force system.

Lesson 1: Introduction
 This lesson covers a brief review on coplanar force systems that have been
discussed early in the junior and senior high school years of the students.
 It is worthy to recall that coplanar force systems are two-dimensional force systems
that lie on the same plane and majority of the problems in mechanics involves forces
in a plane.
 Some problems involve force systems in three-dimensional space called spatial
force systems.

Objectives
At the end of this lesson, the student must be able to:
1. Demonstrate the coplanar force systems through the aid of a free-body diagram.
2. Demonstrate the spatial force systems in a three-dimensional axes.
3. With the aid of the axes, explain and demonstrate the difference between the
coplanar force systems and the spatial force systems.

Self-assessment Test
1. Coplanar force system usually involves two axes. Name these two axes.
2. A single force that is equivalent to a given force system is called the
___________ of the force system.
3. Name at least two methods of finding the vector sum of two or more vectors.
4. Spatial force system usually involves three axes. Name the third axis.
5. Find the resultant of the two forces. Force A is 250 N directed 30° above the
positive x-axis and force B is 325 N directed 60° below the negative x-axis. (4
points)

Content
This lesson starts with a review of a two-dimensional coplanar force systems,
their rectangular components, resultant and direction angles.
Summary
Resultant

 A system of coplanar forces acting on a rigid body may be replaced by a single


equivalent force called its resultant, which will produce the same mechanical effect
to the rigid body as the given system.

Rectangular Components

 Two mutually perpendicular components whose resultant is equal to a force are


called the rectangular components of the force.
 If the magnitude and direction angle of a force are known, then the rectangular
components are
Fx = F cos θ
Fy = F sin θ
Where the direction angle θ must be measured in the standard position.
 When the rectangular components of a force are given, the magnitude and direction
of the force may be determined from
F=

 And the reference angle is


=
 The direction angle θ in the standard position can then be determined.

Component Method

 The resultant of any number of concurrent coplanar forces may be obtained by using
the component method.
 First, each force is resolved into the x and y components. Then the components of
the resultant can be determined from
Rx = ΣFx
Ry = ΣFy
 From the two components Rx and Ry, the magnitude and direction of the resultant R
can be determined.
 The line of action of the resultant R must pass through the common point of the
given concurrent force system.

Exercises
Post Test

1. Write the formula for finding the magnitude of the force given its rectangular
components.
2. How is the direction angle of the force measured?
3. How is the reference angle computed?
4. Why does the line of action of the resultant R need to pass through the common
point of a given concurrent force system?
5. Solve the following problem: (4 Points)

Lesson 2: Rectangular Components of a Spatial Force


Introduction
 This lesson covers the rectangular components of a spatial force which involves
three axes, namely the x-, y-, and z- axes.
 Also discussed in this lesson is expressing a force in terms of its three rectangular
components along with solving the magnitude and direction angles of a force.

Objectives
At the end of this lesson, the student must be able to:
1. Express a force in terms of its rectangular components
2. Solve for the magnitude and direction angles of a force

Self-Assessment Test
1. A 400-lb force F acts in the direction defined by the direction angles θx=70° and
θy=50°. The z-component of the force is negative. Find the components of the
force.

Content
 The rectangular components of a spatial force system are very similar to the
coplanar force systems only that another axis has been added in such a way that the
force may now be resolved into three components.

FIGURE 6-1
Summary

Exercises
Find the rectangular components of the forces shown in figures P6-3 and P6-4.

You might also like