What Are The Safety Do's and Don'ts For Students?
What Are The Safety Do's and Don'ts For Students?
Life threatening injuries can happen in the laboratory. For that reason, students need
to be informed of the correct way to act and things to do in the laboratory. The
following is a safety checklist that can be used as a handout to students to acquaint them
with the safety do’s and don’ts in the laboratory.
Conduct
Housekeeping
• Keep work area neat and free of any unnecessary objects.
• Thoroughly clean your laboratory work space at the end of the laboratory session.
• Do not block the sink drains with debris.
• Never block access to exits or emergency equipment.
• Inspect all equipment for damage (cracks, defects, etc.) prior to use; do not use
damaged equipment.
• Never pour chemical waste into the sink drains or wastebaskets.
• Place chemical waste in appropriately labeled waste containers.
• Properly dispose of broken glassware and other sharp objects (e.g., syringe needles)
immediately in designated containers.
• Properly dispose of weigh boats, gloves, filter paper, and paper towels in the
laboratory.
Hygiene Practices
• Keep your hands away from your face, eyes, mouth, and body while using chemicals.
• Food and drink, open or closed, should never be brought into the laboratory or
chemical storage area.
• Never use laboratory glassware for eating or drinking purposes.
• Do not apply cosmetics while in the laboratory or storage area.
• Wash hands after removing gloves, and before leaving the laboratory.
• Remove any protective equipment (i.e., gloves, lab coat or apron, chemical splash
goggles) before leaving the laboratory.
Emergency Procedure
• Know the location of all the exits in the laboratory and building.
• Know the location of the emergency phone.
• Know the location of and know how to operate the following:
Fire extinguishers
Alarm systems with pull stations
Fire blankets
Eye washes
First-aid kits
Deluge safety showers
In case of an emergency or accident, follow the established emergency plan as
explained by the teacher and evacuate the building via the nearest exit.
Chemical Handling
• Check the label to verify it is the correct substance before using it.
• Wear appropriate chemical resistant gloves before handling chemicals. Gloves are
not universally protective against all chemicals.
• If you transfer chemicals from their original containers, label chemical containers as
to the contents, concentration, hazard, date, and your initials.
• Always use a spatula or scoopula to remove a solid reagent from a container.
• Do not directly touch any chemical with your hands.
• Never use a metal spatula when working with peroxides. Metals will decompose
explosively with peroxides.
• Hold containers away from the body when transferring a chemical or solution from one
container to another.
• Use a hot water bath to heat flammable liquids. Never heat directly with a flame.
• Add concentrated acid to water slowly. Never add water to a concentrated acid.
• Weigh out or remove only the amount of chemical you will need. Do not return the
excess to its original container, but properly dispose of it in the appropriate waste
container.
• Never touch, taste, or smell any reagents.
• Never place the container directly under your nose and inhale the vapors. • Never mix or
use chemicals not called for in the laboratory exercise.
• Use the laboratory chemical hood, if available, when there is a possibility of release of
toxic chemical vapors, dust, or gases. When using a hood, the sash opening should be
kept at a minimum to protect the user and to ensure efficient operation of the hood. Keep
your head and body outside of the hood face. Chemicals and equipment should be placed
at least six inches within the hood to ensure proper air flow.
• Clean up all spills properly and promptly as instructed by the teacher. • Dispose of
chemicals as instructed by the teacher.
• When transporting chemicals (especially 250 mL or more), place the immediate
container in a secondary container or bucket (rubber, metal or plastic) designed to be
carried and large enough to hold the entire contents of the chemical.
• Never handle bottles that are wet or too heavy for you.
• Use equipment (glassware, Bunsen burner, etc.) in the correct way, as indicated by the
teacher.
Some safety symbols were also given on the next page. This part can also be
supplemented by the following video on YouTube:
https://www.youtube.com/watch?v=9o77QEeM-68
NAME SCORE DATE
Course/Year/Section: Class Sched: Day: Time:
After absorbing the safety rules and symbols presented from the previous pages. You are
now ready to answer look into the following pictures. Analyze each picture very carefully
and identify the safety rules and regulations that should be practiced inside the (chemistry)
laboratory room. Write your answers on the space provided after each picture
PICTURE A: For an appetizer, you just have to encircle the violations from the safety
rules that you can find in the picture. How many violations are there? Answer:
PICTURE B: Identify the safety rule disobeyed/violated by the students and explain the
potential hazard it can cause. You may also identify the other hazards near each student.
Identify the students in clockwise manner, starting from Savannah and ending with Will.
Write your answers on the table below.
PICTURE C: Bill, Tom and Betty are conducting several experiments in the lab as you
can see from the picture below:
Task: Your job is to do the following:
1. Circle the mistakes each is making. (This checks your understanding of appropriate
lab situations)
2. Fill out the table below showing the safety rules that Bill, Tom and Betty are breaking
and explain the potential hazard.
Safety Rule Broken Potential hazard
Bill
Tom
Betty