Scribd
Upload
20 views

Tabulation For Suitable Component of Shuttering Arrangements

The document provides recommendations for suitable shuttering component types based on the width of the shutter. For shutter widths up to 1 meter, cast iron head assemblies should be light to medium duty. Top beams should be 150x75mm RSJ. Screw rods should be 50mm or 63mm diameter. Groove angles should be 65x65x6mm. Heavier and larger components are recommended as shutter widths increase above 1, 2, and 3 meters.

Uploaded by

sirkali1973
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
20 views

Tabulation For Suitable Component of Shuttering Arrangements

The document provides recommendations for suitable shuttering component types based on the width of the shutter. For shutter widths up to 1 meter, cast iron head assemblies should be light to medium duty. Top beams should be 150x75mm RSJ. Screw rods should be 50mm or 63mm diameter. Groove angles should be 65x65x6mm. Heavier and larger components are recommended as shutter widths increase above 1, 2, and 3 meters.

Uploaded by

sirkali1973
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Tabulation for suitable component of shuttering arrangements

Shutter width
Sl
Description Remarks
No Above 1.00m and Above 2.00m and Above 3.00m and
Up to 1.00m up to 2.00m up to 3.00m up to 4.00m

1 Cast Iron Head set Light / Medium Medium Heavy/ Horn Type
assembly Horn Type (150 Kg)

2 Top Beam set 150 x 75 mm RSJ 150 x 75 mm RSJ 200 x 100 mm RSJ 300 x 140 mm RSJ

3 Screw Rod 50 mm dia / 63 mm dia 63 mm dia/ 80 mm dia /


63 mm dia 80 mm dia 100 mm dia

100 x 100 x 10 mm/


4 Groove Angle 65 x 65 x 6 mm 65 x 65 x 6 mm 100 x 100 x 10mm
150 x 150 x 12 mm

file:///conversion/tmp/scratch/492395633.xlsx

You might also like