Scribd
Upload
380 views

Petroleum Engineering Software

The document describes several petroleum engineering software tools that provide analysis and optimization for various downstream oil and gas operations. PVT tool calculates fluid properties while PQplot performs inflow and lift analysis. sPipe sizes pipelines and PhaseD builds phase diagrams. PumpDesign optimizes ESP selection and optiFrac/optiFracMS optimize fracture designs for single and multi-stage horizontal wells. fracDesign designs fracture treatments while onPlan simulates fracturing to maximize well productivity in complex environments. All software aim to optimize performance and are available for free trial at the provided website.

Uploaded by

Mikhail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
380 views

Petroleum Engineering Software

The document describes several petroleum engineering software tools that provide analysis and optimization for various downstream oil and gas operations. PVT tool calculates fluid properties while PQplot performs inflow and lift analysis. sPipe sizes pipelines and PhaseD builds phase diagrams. PumpDesign optimizes ESP selection and optiFrac/optiFracMS optimize fracture designs for single and multi-stage horizontal wells. fracDesign designs fracture treatments while onPlan simulates fracturing to maximize well productivity in complex environments. All software aim to optimize performance and are available for free trial at the provided website.

Uploaded by

Mikhail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Petroleum Engineering Software

PVT tool provides the basic input for any petroleum engineering calculation. PVT tool
calculates properties of oil, gas and water for oil or gas wells using a set of black-oil
correlations. Featuring charts with PVT properties and result tables ready to save, export
and use in your next calculation.

PQplot nodal analysis software is at the heart of Petroleum Engineering. It calculates


inflow performance relationship (IPR) and vertical lift performance (VLP) curves for oil
and gas wells. Featuring multiphase flow correlations and sensitivity analysis. It features
a simple and easy to use input screen and generates a robust output that can be saved
and shared.

sPipe is a simple to use surface pipeline sizing software. It calculates pressure drop in oil,
gas or water flowlines. Featuring multiphase flow correlations and sensitivity analysis.

PhaseD is a simple to use software that builds a pressure-temperature phase diagram


for the given gas compositions. Featuring comparison of compositions and flash
calculations..

PumpDesign is a ESP design software. For the given oil well it provides an turn key ESP
sizing workflow to achieve target well bottomhole pressure and rate. Featuring interactive
ESP library, tornado chart, motor, cable and drive selection.

optiFrac is a single well fracture design optimization software. For the given set of
reservoir and proppant properties it calculates maximum achievable well productivity
index and required fracture geometry.

optiFracMS is a Multiple Stage fracture design optimization software for the horizontal
well. For the given set of reservoir properties and the proppant mass it calculates optimal
number of transverse hydraulic fractures and required fractures geometry to maximize
well productivity index. Featuring optimization plots, practical constraints envelopes and
sensitivity analysis.
fracDesign is a hydraulic fracture design software. For the given set of reservoir, fluid and
proppant properties the design process produces the pumping schedule which will create
the optimal fracture geometry to achieve maximum well's productivity.

onPlan is a hydraulic fracture simulation software for designing a fracture treatment.


Utilizing the Planar3D model and Unified Fracture Design concept it allows comparison of
the design frac geometry with the optimal one to maximize the rate of the fractured well
in complex environments.

Try the software for free at www.pengtools.com

You might also like