Scribd
Upload
82 views

B: - (R T) × B - B: B: - (R T) × B - B

The document lists 24 samples of nuts, bolts, and washers across various sizes and batch numbers, to be tested according to various ASTM standards. The nuts, bolts, and washers will undergo chemical analysis, tensile tests, hardness tests, coating thickness measurement, and dimension tests. The results of the tests are requested to be shared as soon as possible.

Uploaded by

ninatena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
82 views

B: - (R T) × B - B: B: - (R T) × B - B

The document lists 24 samples of nuts, bolts, and washers across various sizes and batch numbers, to be tested according to various ASTM standards. The nuts, bolts, and washers will undergo chemical analysis, tensile tests, hardness tests, coating thickness measurement, and dimension tests. The results of the tests are requested to be shared as soon as possible.

Uploaded by

ninatena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

D, Batch no:201907-105(Refer to StandardASTM A325)

3.M22×70 Bolt-03 Pcs, Batch no:201907ea, Batch no:201907-105(Refer to


StandardASTM A325)
3.M22×70 Bolt-03 Pcs, Batch no:201907r Sir,

W–

201ardASTBardASTOLTe are
sending sample as listed below for
conducting the test
1. M16×40 Bolt-04 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A325)
2. M16×45 Bolt-05 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A325)
3. M22×70 Bolt-03 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A325)
4. M24×70 Bolt-02 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A325)
5. M24×80 Bolt-04 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A325)
6. M24×95 Bolt-03 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A325)
7. M36×900 Anchor Bolt-02 Batch no: 201907-107 (Refer to Standard ASTM A325)
8. M36×1050 Anchor Bolt-03 Batch no: 201907-107 (Refer to Standard ASTM A325)

NUT
9. M16×40 Nut-002 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A563)
10. M16×45 Nut-05 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A563)
11. M22×70 Nut-01 Pcs, Batch no: 201907-105 (Refer to Standard ASTM A563)
12. M24×70 Nut-01 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A563)
13. M24×80 Nut-03 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A563)
14. M24×95 Nut-02 Pcs, Batch no: 201907-106 (Refer to Standard ASTM A563)
15. M36×900 Anchor Nut-01 Batch no: 201907-107 (Refer to Standard ASTM A563)
16. M36×1050 Anchor Nut-01 Batch no: 201907-107 (Refer to Standard ASTM A563)
WASHER
17. M16×40 Washer-02 Pcs, Batch no: 201907-105 (Refer to Standard ASTM F436)
18. M16×45 Washer-05 Pcs, Batch no: 201907-105 (Refer to Standard ASTM F436)
19. M22×70 Washer-01 Pcs, Batch no: 201907-105 (Refer to Standard ASTM F436)
20. M24×70 Washer-01 Pcs, Batch no: 201907-106 (Refer to Standard ASTM F436)
21. M24×80 Washer-03 Pcs, Batch no: 201907-106 (Refer to Standard ASTM F436)
22. M24×95 Washer-02 Pcs, Batch no: 201907-106 (Refer to Standard ASTM F436)
23. M36×900 Washer-01 Batch no: 201907-107 (Refer to Standard ASTM F436)
24. M36×1050 Washer-01 Batch no: 201907-107 (Refer to Standard ASTM F436)

Above listed sample NUT & BOLT for conducting the test as listed below-

1. Chemical Analysis:
(Carbon, Silicon, Manganese, Sulfur, Phosphorus)

2. Tensile Test
Page 1 of 2
3. Hardness Test
4. Coating Thickness Measurement
5. Dimension

Above listed sample WASHER for conducting the test as listed below-

1. Chemical Analysis:
(Carbon, Silicon, Manganese, Sulfur, Phosphorus)

2. Hardness Test

Kindly Conduct the test and share the results as earliest.

Sincerely Yours, Witness,

Page 2 of 2

You might also like