Scribd
Upload
140 views

P26120 Universal Emergency Module

The Universal Type Emergency Module is designed for emergency LED lighting with an external LED driver. It has an input voltage of 85-265V at 50-60Hz and can provide 1.5 hours of emergency lighting on its 2000mAh high temperature battery pack. The module has indicators for normal function and emergency testing. It is equipped with battery protection and can operate between 0 and 80 degrees Celsius.

Uploaded by

Sadak Charry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
140 views

P26120 Universal Emergency Module

The Universal Type Emergency Module is designed for emergency LED lighting with an external LED driver. It has an input voltage of 85-265V at 50-60Hz and can provide 1.5 hours of emergency lighting on its 2000mAh high temperature battery pack. The module has indicators for normal function and emergency testing. It is equipped with battery protection and can operate between 0 and 80 degrees Celsius.

Uploaded by

Sadak Charry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Universal Type Emergency Module

1. DESCRIPTION
Emergency Model HWLPD is designed for Emergency LED Light with external led driver, Sylvania
Keep the right for all design and technology information.

2. TECHNICAL SPECIFICATION
2.1 Input Voltage (Dual) AC 85-265V, 50-60Hz
2.2 Normal function Indicating LED Equipped
2.2 Emergency Function Testing Device Equipped
2.3 Emergency Time 1.5hours
℃
2.4 Battery Protection Device Equipped
2.5 Operating Temp 0 ~ 80
2.6 Battery High Temp Battery Pack
4.8V 2000mAh
2.7 Start-up Charging Time 24 hours
2.8 Stand-by power 5W

3. WIRING DIAGRAM
4. EMERGENCY INVERTYER

Inverter Size:38x30x172mm
Weight:200G
5. BATTERY

4.8V SC2000mAh High Temp Nicd Battery Pack


Size:30x70x200mm
Weight:220G

4.8V 2000mAh Nicd battery pack 200 mm 70mm 30mm

6. APPLICATION GUIDE

6.1. Install the unit according to wiring diagram, any improper wiring may lead to permanent
damage to the unit;
6.2. Normal AC mains supply, the inverter allows the battery pack charging, trickle charge to
maintain battery performance. Sudden interruption of the mains AC, then the inverter converts
DC battery powered to ensure that lighting and security;
6.3. Inverter with multiple protection functions: charge protection, discharge protection, short
circuit protection;
6.4. To ensure maximum performance of the built-in battery, please fully charge the unit for
24hours after first installation; to extend battery life, please contact with Howell energy and
make sure charge the battery at least one time every three months.
6.5. Don’t install top of the high temperature objects. Please ensure that the operating ambient
temperature is below 50ºC, and maximum case temperature (tc) not exceeding 80ºC;
6.6. Do not operate this unit beyond the operating supply range;
6.7. In normal use, the battery can be done 1000 charge/discharge cycles
6.8. Inverter life is more than years
6.9. Please make sure not wrong connect the mains AC, or else will broken the inverter.
6.10. If experience any problem during use, please contact with Sylvania for help.

Note: Test switch, LED for charging indication is available, stainless steel outside case for choice.

You might also like