1.

The solution by FEM is [ B ]

a) Always exact b)mostly approximate c) sometimes exact d) never exact
2. Discrete analysis cover [ C ]
a) all 2-D trusses &frames b)all 3-D trusses &frames c)all 2-D and 3-D trusses &frames
d) no trusses; only frames
3. FEM is a generalization of [ A ]
a) Rayleigh-Ritz method b) weighted residual method c) Finite difference method d)Finite volume method
4. Variation principle is the basis for [ A ]
a) Displacement method b) weighted residual method c) finite difference method
d) finite volume method
5 .Displacement method is based on minimum [ A ]
a) potential energy b)strain energy c)complementary strain energy d)work done
6 .Hybrid methods is best suited for problems with prescribed [ C ]
a) Displacements b) forces c) stresses d) temperature
7. Primary variable in FEM structural analysis is [ A ]
a)displacement b)force c)stress d)strain
8. Stress boundary conditions can be prescribed in [ B ]
a) Displacement method b) hybrid method c) force method d) mixed method
9. Prescribed loads can form input data in [ A ]
a) Displacement method b) hybrid method c) force method d) mixed method
10. Stiffness matrix approach is used in [ A ]
a) Displacement method b) stress method c) force method d) mixed method
11. Displacement method of FEM for structural analysis gives [ A ]
a) Stiffness matrix b) flexibility matrix c) conductance matrix d) mixed matrix
12. Flexibility matrix approach is used in [ C ]
a) Displacement method b) stress method c) force method d) mixed method

Discrete (1-D) Elements

1. Transformation matrix_ for all elements [ C ]
a) is always same b)is different c) depends on element axes d) depend on material
2. Transformation matrix relates_ in element coordinate system with structural coordinate System [ D ]
a) Displacements b) stresses c) stiffness coefficients d) material properties
3. Primary variable in FEM structural analysis is [ A ]
a) Displacement b) force c) stress d)strain
4. A singular stiffness matrix means [ B ]
a) Unstable structure b) one or more DOF are unrestrained c)wrong connectivity of elements d) wrong solution
expected
5. One possible load in structural analysis is the specified [ A ]
a) Nodal temperature b)stress in an element c) Heat flow d) strain in an element
6. Assembled stiffness matrix after applying boundary conditions is NOT [ D ]
a) Square b)symmetric c) banded d)singular
7. Determinant of assembled stiffness matrix before applying boundary conditions is [ B ]
a) <0 b) =0 c) >0 d) depends on the problem
8. Determinant of assembled stiffness matrix after applying boundary conditions is [ C ]
a) <0 b) =0 c) >0 d) depends on the problem
9. A pipe with internal pressure behaves _ a hollow pipe of same section [ B ]
a) with exactly same deflection as b) with lesser bending deflection than
b) with more bending deflection than d) with a different type of deflection
10. Any point in a structure can have maximum of _DOF [ D ]
a) 2 b) 3 c) 4 d) 6
11. A 1-D structural element is a [ D ]
a) truss element b) beam element c) pipe element d) all of them
12. Meshing for 1-D element is [ B ]
a) Essential b) optional c)reduces input data d) depend on other data
 Continuum (2-D & 3-D) Elements
1. Complete polynomial is ___ important, compared to symmetry of displacement polynomial w.r.to
coordinate directions [ C ]
a) Equally b) more c) less d) unrelated
2. A triangular element with cubic displacement function require___ nodes to represent the
complete and symmetric polynomial [ D ]
a) 3 b) 6 c) 9 d) 10
3. A triangular element with quadratic displacement function require ___ nodes to represent the complete
polynomial [ B ]
a) 3 b) 6 c) 6 d)10
4. A triangular 9-noded element will usually have ___cubic displacement function [ B ]
a) Symmetric& complete b) symmetric& incomplete c) un symmetric & complete d) un symmetric & incomplete
5. A constant term in the displacement function ensures [ A ]
a) Rigid body mode b) constant strain mode c) zero stress d) zero deformation
6. Number of terms in the displacement function in relation to the number of nodes in that element is [ B ]
a) More b) equal c) less d) unrelated
7. A linear term in the displacement function ensures [ B ]
a) Rigid body more b) constant strain mode c) strain varying in the element d) stress varying in the element
8. All stiffness coefficients of a plate bending element have _ units [ B ]
a) Same b) different c) any set of d) depend on other data
9. All stiffness coefficients of an axisymmetric element have _ units [ A ]
a) Same b) different c) any set of d) depend on other data
10. Displacement method can NOT be used with _ boundary conditions [ C ]
a) Pressure b) temperature c) stress d) displacement
11. A triangular plane stress element has ____ D.O.F [ A ]
a) 6 b) 9 c) 12 d) 15
12. A thin shell element has___ no. of DOF, compared to a plate bending element [ B ]
a) Same b) more c) less d) un related
13. A plane stress element has __ no. of DOF, compared to a plate bending element [ C ]
a) Same b) more c) less d) un related
14. An axisymmetric element has__ no.of DOF, compared to a plate bending element [ C ]
a) Same b) more c) less d) un related
15. A structural thin shell triangular element has ___DOF [ D ]
a) 3 b) 6 c) 9 d) 18
16. A triangular plane strain element has___ DOJ [ B ]
a) 3 b) 6 c) 9 d) 15
17. Number of displacement polynomials used for an element depends on [ D ]
a) No. of nodes/ element b) No. of DOF/ node c) No. of DOF/ element d) type of element
18. For a plate bending element, number of displacement polynomials and number of D.O.F/ node are [ B ]
a) 1,2 b) 1,3 c) 2,3 d) 2,4
19. Accuracy of solution in a 2-D component depends on [ A ]
a) Included angle of elements b) size of the component c) no.of DOF/ node d) type of load
20. Displacement of any point on a side is related to displacements of nodes on that side only, ensures [ B ]
a) Equilibrium b) compatibility c) energy balance d) continuity along inter- element boundary
21. Continuum analysis covers [ C ]
a) All 2-Dtrusses & frames b) all 3- D trusses & frames c) all 2-D and 3-D plates, solids d) only 3-D solids
22. Optimum number of element in finite element model depends on assessment of_ distribution in the
component [ B ]
a) Displacement b) stress c) strain d) potential energy
23. Displacement function which matches function value at the specified nodes is classified as[ A ]
a) Lagrange interpolation function b) serendipity function c) Hermite interpolation function d) pascal function
24. Displacement function which matches function value as well as its derivatives (slopes) at the specified
nodes is classified as [ C ]
a) Lagrange interpolation function b) serendipity function c) Hermite interpolation function d) pascal function
25. Continuum analysis includes [ D ]
a) Trusses b) beams c) plates d) plates & solids
26. Continuum element and discrete members can be included in a single model for analysis [ D ]
a) Always true b) sometimes true c) never true d) depends on matching DOF
27. Continuum elements in different analysis may vary in [ D ]
a) Size b) shape c) size or shape d) size & shape
28. Element formed with edges parallel to coordinate axes is called [ C ]
a) Simplex element b) complex element c) multiplex element d) compound element
29. An element with no Internal nodes is classified as [ A ]
a) Serendipity element b) Lagrange element c) Hermite element d) Laplace element
30. An element with internal nodes is classified as [ B ]
a) Serendipity element b) Lagrange element c)Hermite element d) Laplace element
31. A concrete pedestal is represented by [ C ]
a) Plane stress elements b) plane strain elements c) 3-D solid elements d) 3-D shell elements
32. Combination of plane stress element behavior and plate bending behavior forms [ C ]
a) 3-D solid element b) 3-D shell element c) thin shell element d) thick shell element
33. A 3-D dam is usually modeled with [ B ]
a) 2-D plane stress elements b) 2-D plane strain element s c) 3-D solid elements d) 3-D shell elements
34. Element formed by joining n+1nodes in n-dimensional space is called [ A ]
a) Simplex element b) complex element c) multiplex element d) compound element
35. Element formed with quadratic or higher order displacement polynomial is a [ B ]
a) Simplex element b) complex element c) multiplex element d) compound element
36. Element connecting lower order element and higher order element in a mesh are called [ A ]
a) Transition elements b) sub-parametric elements c) iso –parametric elements d) super- parametric elements
37. Elements having mid-side nodes only on some sides are called [ A ]
a) Transition elements b) sub- parametric elements c) iso- parametric elements d) super – parametric elements
38. Stress- strain matrix for plane element, if strain is represented by Sij and stress is represented by stij, is
obtained from the condition [ D ]
a) Szz=0 b) Szx=0 c) stzx=0 d) stzz=0
39. Stress – strain matrix for plane strain element, if strain is represented by sij, is obtained from the
condition [ A ]
a) Szz=0 b) szx=0 c) stzx=0 d) stzz=0
40. Stress –strain matrix for axisymmetric element is of order [ A ]
a) 3*3 b)4*4 c) 6*6 d) 9*9
41. Stress- strain matrix for plate bending element is of order [ A ]
a) 3*3 b) 4*4 c) 6*6 d) 9*9
42. Elasticity matrix for_ behavior is similar to 3-D elasticity matrix [ B ]
a) Plane stress b) plane strain c) plate bending d) axisymmetric
43. Plane stress element is an extension of [ A ]
a) Truss element b) beam element c) pipe element d) spring element
44. Plate bending element is an extension of [ B ]
a) Truss element b) beam element c) pipe element d) spring element
45. Wrong sequencing of nodal connectivity in 2-D & 3-D problems leads to [ C ]
a) + ve Jacobian b) zero Jacobean c) –ve jacobian d) no relation with jacobion
46. Axisymmetric structures are usually modeled in [ B ]
a) Element local coordinates b) global Cartesian coordinates c) global cylindrical coordinates d) user specified
system
47. A plate of 1 cm thickness with in- plane loads IS modeled by [ A ]
a) Plane stress element b) plane strain element c) plate bending element d) any one of them
48. Actual thickness of plane strain element is [ B ]
a) Very small b) very large c) any specified value d) assumed by software
49. Order of stiffness matrix for a plane stress model with 20 nodes is [ C ]
a) 10 b) 20 c) 40 d) 60
50. Order of stiffness matrix for an axisymmetric model with 20 nodes is [ C ]

a) 10 b) 20 c) 40 d) 60
51. number of stress components per node calculated for a plane stress quadrilateral element is [ B ]
a) 2 b) 3 c) 4 d) 5
52. Number of stress components per node calculated for a triangular axisymmetric element is [ C ]
a) 2 b) 3 c) 4 d) 5 5
53. A general plate element is a superposition of___ elements [ C ]
a) Plane stress & plane strain b) plain strain & plate bending c) plane stress & plate bending d) Plate bending only
54. An element with in – plane loads having 3 nodes along each side is a [ B ]
a) Constant strain element b) linear strain element c) quadratic strain element d) Constant displacement method
 HIGHER ORDER AND ISOPARAMETRIC
1. Curved boundary is better modeled by using [ D ]
a) Non- dimensional shape function b) higher order element c) more number of simple element d) is parametric
element
2. Sum of shape functions at a point is [ A ]
a) 1 b) 0 c) any +Ve integer d) any –ve integer
3. When fewer nodes are used to define the geometry than are used to define the displacement, the element
is called _element [ A ]
a) Sub parametric bb) isoparametric c) super parametric d) complex
4. When same number of nodes are used to define the geometry and displacement, the element is called
_element [ B ]
a) Sub parametric b) iso parametric c) super parametric d) simple
5. When more nodes are used to define the geometry than are used to define the displacement, the element is
called _ element [ C ]
a) Sub parametric b) iso parametric c) Super parametric d) complex
6. Derivatives of displacement function with respect to element coordinate system and non-dimensional
coordinate system is given by [ D ]
a) Lagrangian b) poisson c) Gaussian d) jacobian
7. Number of shape functions for a triangular plane stress element are [ B ]
a) 2 b) 3 c) 4 d) 6
8. Number of shape functions for a quadrilateral plan stress element are [ C ]
a) 2 b) 3 c) 4 d) 8
9. Number of shape functions for a 8-noded quadrilateral plan stress element is [ D ]
a) 2 b) 3 c) 4 d) 8
10. Shape functions for a triangular plane stress element are also called [ B ]
a) r-s coordinates b) area coordinates c) volume coordinates d) x-y coordinates

FACTORS INCLUENCING SOLUTION

1. A symmetric structure can be analyzed by modeling one symmetric part [ D ]

a) Depending on applied loads b) depending on boundary conditions
c) always yes d) depending on applied load & boundary conditions
2. Anti-symmetric boundary condition along an edge of a 2-D structure implies, applied loads are ___ on
either side of the edge [ B ]
a)Opposite b) equal c) equal and opposite d) unrelated
3. Sector symmetry boundary condition implies ___ along two radial edges of the sector [ B ]
a) Same radial displacements in Cartesian in coordinate system
b) Same circumferential displacements in cylindrical coordinate system
c) Equal and opposite radial displacement in Cartesian coordinate system
d) Equal and opposite circumferential displacements in cylindrical coordinate system
4. Cyclic symmetry boundary condition implies ___along two edges of the sector [ B ]
a) Same radial displacements in Cartesian coordinate system
b) Same circumferential displacements in cylindrical coordinate system
c) Equal & opposite radial displacements in Cartesian coordinate system
d) Equal and opposite circumferential displacements in cylindrical coordinate system
5. An octagonal section chimney with hot gases inside can be analyzed using ___model [ D ]
a) Full section b) one half of section c) one quarter of section d) 1/8th of section
6. Use of non- dimensional coordinates helps in [ A ]
a) Numerical integration b) displacement calculation c) stress calculation d) strain calculation
7. Gaussian points are used for [ A ]
a) Numerical integration b) displacement calculation c) stress calculation d) strain calculation
8. Quadrature means [ C ]
a) Calculation of area of element b) calculation of element stress c) numerical integration for getting stiffness
coefficients d) calculation of nodal displacement
9. Accuracy of stiffness matrix improves with [ A ]
a) More number of Gaussian points b) more number of nodes c) size of elements
d) shape of element
10. Sector symmetry and cyclic symmetry differ [ A ]
a) In the shape of sector edges b) in the size of sector edges c) in radial displacements along two sector edges d) in
circumferential displacements along two sector edges
11. Using symmetry condition ___ ;but gives same solution [ D ]
a) Saves computer time b) saves computer memory c) saves effort of data preparation d) all of them
12. Symmetry boundary condition about an edge is applicable when [ C ]
a) Normal loads & normal displacements at nodes along the edge are zero
b) Loads & displacement along the edge are zero
c) Normal loads & normal displacements at nodes on either side of the edge are equal & opposite
d) Lodes & displacements along the edge are same
13. A cantilever beam can be analyzed as a plate with ___ boundary conditions [ D ]
a) Cartesian symmetric b) sector symmetry c) cyclic symmetry d) Cartesian anti-symmetric
14. Number of DOF for 2-node cantilever and propped cantilever are [ B ]
a) 1,2 b) 2,1 c) 3,4 d) 2,4
15. Number of DOF for 3-noded simply supported beam and fixed beam are [ D ]
a) 1,2 b) 2,3 c) 3,4 d) 4,2
16. Small region of interest in a big component can be analyzed using free body end conditions [ A ]
a) Always true b) sometimes true c) never true d) depends on other data
17. ___model of a rectangular plate with a circular hole at the center , and loaded uniformly along the four
edges, is adequate for analysis [ C ]
a) Full b) ½ c) ¼ d) 1/8
18. ____model of a square plate with a circular hole at the center , and loaded uniformly along the four
edges, is adequate for analysis [ D ]
a) Full b) ½ c) ¼ d) 1/8
19. ____mode of a square plate with a rectangular hole at the center(edges parallel to the edges of the
plate) , and loaded uniformly along the four edges, is adequate for analysis [ C ]
a) Full b) ½ c) ¼ d) 1/8
20. In statically equivalent loads, free end moment of a cantilever of length L with uniformly distributed
load of value ‘P’ is [ B ]
a) pL2/4 b) pL2/8 c) pL2/12 d) pL2/16
21. Inconsistent loads, free end moment, of a cantilever of length L with uniformly distributed load of value
S is [ C ]
a) pL2/4 b) pL2/8 c) pL2/12 d) pL2/16
22. In statically equivalent loads, end moment of a simply supported beam of length L with a concentrated
load P at the midpoint is [ A ]
a) PL/4 b) PL/8 c)PL/12 d)PL/16
23. Inconsistent loads, end moment of a simply supported beam of length L with a concentrated load P at
the midpoint is [ B ]
a) PL/4 b) PL/8 c) PL/12 d) PL/16
24. In statically equivalent loads, end moment of a simply supported beam of length L with a uniformly
distributed load of value P is [ B ]
a) pL2/4 b) pL2/8 c) pL2/12 d) pL2/16
25. In consistent loads, end moment of a simply supported beam of length L with a uniformly distributed
load of value p is [ C ]
a) pL2/4 b) pL2/8 c)pL2/12 D) Pl2/16
26. Consistent loads for a LST element with uniform pressure P along an edge of length L at the two end
nodes and mid- node are [ D ]
a) pL/2,pL/2,0 b)pL/3,pL/3,pL/3 c) pL/4,pL/4,pL/2 d) pL/6,pL/6,2pL/3
27. The process of reducing number of mid-side or internal nodes before assembling element stiffness
matrices is called [ D ]
a) Gauss reduction b) Jacobi reduction c) choleski reduction d) static condensation
28. Lengths of longest side and shortest side of a 2-D or 3-D element decide the [ A ]
a) Aspect ratio b) shape function c) order of displacement polynomial d) included angle
29. Number of nodes along the side of a 2-D or 3-D element decide the [ C ]
a) Aspect ratio b) shape function c) order of displacement polynomial d) nature of deformation

DYNAMIC ANALYSIS

1. An unconstrained 3-D frame with 4 nodes has____ number of zero frequencies [ D ]

a) 1 b) 2 c) 3 d) 6
2. A frequency of value___ indicates rigid body motion along one dof [ A ]
a) Zero b) 1 c) infinity d) less than zero
3. Principal modes of vibration of a multi- dof system are [ B ]
a) Parallel b) orthogonal c) integer multiples d)fractional multiples
4. With lumped mass matrix, the differential equation of vibration refers to [ A ]
a) Elastic coupling b) inertia coupling c)mode superposition d) both inertia and elastic coupling
5. With consistent mass matrix, the different equation of vibration refers to [ B ]
a)Elastic coupling b) inertia coupling c) mode superposition d) both inertia and elastic
6. Normalizing eigen vector w.r.to mass matrix is useful in [ A ]
a) Mode superposition b) evaluating natural frequencies c) Frequency response d) damped vibration
7. An unconstrained 2-D frame with 4 modes has ____number of zero frequencies [ C ]
a) 1 b) 2 c) 3 d) 6
8. A 4-noded cantilever gives___ number of frequencies [ C ]
a) 3 b) 4 c) 6 d) 9
9. A 3-noded simply supported beam gives____ number of frequencies [ B ]
a) 3 b) 4 c) 5 d) 7
10. A natural mode of vibration represents____ at each node [ B ]
a) Absolute displacements b) relative displacements c) proportional displacements d) absolute strain

STEADY STATE HEAT CONDUCTION

1. Conductance matrix is the equivalent of stiffness matrix in [ A ]

a) Thermal analysis b) dynamic analysis c) fluid analysis d) static structural analysis
2. ____problem is solved through iterative method [ A ]
a) Transient thermal b) steady state thermal c) structure with thermal loads d) static structural analysis
3. No. of DOF for a 4-noded quadrilateral thermal element is [ A ]
a) 4 b) 8 c) 12 d) 16
4. No. of DOF for a 3-noded triangular thermal element is [ A ]
a) 3 b) 6 c) 9 d) 12
5. No. of DOF for a 6-noded triangular thermal element is [ B ]
a) 3 b) 6 c) 9 d)12
6. No. of DOF for a 4-noded tetrahedran thermal element is [ A ]
a) 4 b) 8 c) 12 d)16
7. No. of DOF for a8-noded quadrilateral thermal element is [ B ]
a) 4 b) 8 c) 12 d)16
8. No. of DOF per node in a triangular thermal element is [ A ]
a) 1 b) 2 c) 3 d) 4
9. No. of DOF per node in a quadrilateral thermal element is [ A ]
a) 1 b) 2 c) 3 d)4
PRACTICAL ANALYSIS USING A SOFTWARE
1. ANSYS uses [ B ]
a) Frontal solution b) banded matrix solution c) Cramer’s rule d) cholesky decomposition
2. A single analysis with 3 similar load steps takes____ time compared to 3 analyses with single load case in
each [ B ]
a) 3 times more b) <3 times more c) same d) not related
3. An analysis with 1load step takes __ time compared to analysis with 3 similar load cases [ B ]
a) 1/3 times less b) >1/3 times less c) same d) not related
4. Consistent loads are based on [ C ]
a) Stress equilibrium b) displacement continuity c) energy equivalence d) force balance
5. Within elastic limit, results due to a combination of loads is same as linear superposition of results by
each of those loads [ A ]
a) Always true b) always false c) sometimes true d) needs repeated analysis
6. A truss element in ANSYS is identified as [ B ]
a) Line element b) spar element c) truss element d) beam element
7. A uniformly distributed load on a beam is indicated in ANSYS as [ C ]
a) Udl b) uvl c) pressure d) equivalent nodal loads
8. Uniform pressure along an edge of a plate element is specified in ANSYS as [ C ]
a) Pressure on element b) pressure along edge c) pressure at each node d) same pressure at all nodes
9. Deformed shape of a simply supported beam with concentrated load at the mid-point appears in ANSYS
as [ B ]
a) Circular are b) triangle with max displacement at mid-point c) parabolic arc d) straight line
10. Deformed share in ANSYS is drawn with [ C ]
a) Actual nodal displacements b) normalized nodal displacements
c) magnified nodal displacements d) reduced nodal displacements
11. Loads commands in ANSYS includes [ A ]
a) Loads& displacements b) loads & stresses c) loads only d) loads or displacements