Scribd
Upload
88 views

Freqcalc: Conditions For Use of The Online Calculation Program

frequencies

Uploaded by

Tien Hong Do
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
88 views

Freqcalc: Conditions For Use of The Online Calculation Program

frequencies

Uploaded by

Tien Hong Do
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Conditions for use of the online

calculation program
FreqCalc

Use of the calculation program FreqCalc is permitted FreqCalc or the results of the program’s calculations
under the following conditions. Upon beginning to use shall not form the basis of any claims by the user against
the calculation program FreqCalc, the user fully and Getzner. The user shall be solely responsible for use
irrevocably accepts the following conditions of of the calculation program FreqCalc and the results of
Getzner Werkstoffe GmbH (hereinafter:“Getzner”): such. The user shall bear sole responsibility for its entry
of data into the program and the assessment of the
correctness and suitability of the calculation results.
(1) The calculation program FreqCalc was developed
by Getzner. The copyright and all other rights belong
to Getzner. Getzner reserves the right to alter the (5) The calculation program FreqCalc is calibrated to
calculation program FreqCalc at any time. In the event the technical parameters from the data sheets of
of alteration, registered users will receive notiication Getzner. The parameters in the data sheets are based
to this effect, whereby Getzner accepts no liability that on the experience and expertise of Getzner. Generally
all registered users will be notiied nor that such notii- speaking, they can be taken as guidelines and calculation
cation will take place in due time. values with due consideration of the typical manufactur-
ing tolerances, but do represent guaranteed properties.

(2) The calculation program FreqCalc is provided only


to the user and is restricted to personal use by said user. (6) The calculations are based on the physical model of
Any other use, in particular creation and dissemination a SDOF oscillator with a weightless spring on a solid,
of copies of the calculation program FreqCalc, by the smooth foundation. The calculation program FreqCalc
user is forbidden. makes calculations based on the assumption of loading
with a rigid mass in the centre of gravity. The calculated
value are relevant for the degree of freedom in the verti-
(3) Getzner provides the calculation program FreqCalc cal direction (1st degree of freedom), taking into consid-
to the user free of charge and independently of the pur- eration the non-linear behavior of the material. Used will
chase of Getzner products. A pre-requisite for this is the be the latest material data in consideration of the shape
prior registration of the user with the required user data. factor dependency. The latest state of the material data
Said data are stored on our server and are used to con- will be indicated in the FreqCalc and also in the footnote
tact the user. If the user desires, the calculations which of the print-out. The information in the Getzner data
are prepared can be saved on Getzner’s server and can sheets (tolerances, testing methods, temperature, etc.)
be deleted. The user hereby grants its express permission must be taken into account. Further information on the
for Getzner to save the user data and calculations. basis for calculations can be found in the Getzner data
sheet “Material properties and technical information in
relation to vibration isolation”.
(4) The calculation program FreqCalc is based on the ex-
perience and expertise of Getzner. To the extent allowed
by law, in relation to the calculation program FreqCalc (7) In order to ensure proper use of the calculation
Getzner assumes no warranty or liability for the contents, program FreqCalc, Getzner recommends training by its
freedom from errors, modes of use or suitability for the technical department, which is offered to interested
speciic needs of the user. Use of the calculation program user of the calculation program FreqCalc.

www.getzner.com
(8) The legal relationship created between the user and
Getzner by user of the calculation program FreqCalc is
subject to Austrian law. Sole jurisdiction for all legal
disputes stemming from this legal relationship shall be
A-6700 Bludenz.

stand: september 2009

FreqCalc en © Copyright by Getzner Werkstoffe GmbH l 12-2010

www.getzner.com
AUsTriA — Bürs GermAny — Berlin — Munich JordAn — Amman JApAn — Tokyo indiA — pune CHinA — Beijing

You might also like