Taco Bell Johnson Creek Bid Plans
Uploaded by
AndrewTaco Bell Johnson Creek Bid Plans
Uploaded by
AndrewTITLE/SITE
T1.0 TITLE SHEET C D E F G H
LOG TO NG -
TACO BELL
CIVIL AND LANDSCAPE DRAWINGS BY SITE SPECIFIC CONSULTANT
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
LEGAL JURISDICTION: XXXXXXXXXXXXXXXXX
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
CIVIL
O
R ELEMENTS
C1.0 SITE DETAILS D
T'S PRIOR
BUILDING CODE: IBC 2006, IMC2006, IPC2006, IEC2006, NEC 2002
C1.1 SITE DETAILS
R PSITE-SPECIFIC
BUILDING AREA: BUILDING 2,159 S.F.
SEATING: 54
LANDSCAPE
REGIONAL ARCHITECTURAL PARTNER (RAP)
IMAGE
L1.0 SITE DETAILS
DRIVE THRU RESTAURANT
RIO
KITCHEN OPERATIONS MUST BE APPROVED
CONSTRUCTION.
OCCUPANCY: A2
L
STRUCTURAL
NSTHE
ITH MEFOR
U
TYPE CONSTRUCTION: TYPE VB S1.0 FOUNDATION PLAN D G H
LIVE MAS MEDIUM54
MODIFICATIONS THAT CHANGE
S2.0 WALL FRAMING PLAN D G
JURISDICTIONAL REQUIREMENTS
O
S3.0 ROOF FRAMING PLAN D
CE WENGINEER
G
I
C
S4.0 STRUCTURAL DETAILS (FOUNDATION) C D H
# PHONE LINES: 25 PAIR CABLE IN 2" CONDUIT S4.1 STRUCTURAL DETAILS (FRAMING) D
THITEMPLATE
ELECTRIC SERVICE: 600 AMPS / 3 PHASE / 120-208 VOLT S4.2 STRUCTURAL DETAILS (ROOF) C D
MUST BEIS
S4.3 STRUCTURAL DETAILS (TACO BELL TOWER) C D
D
GAS: 689,900 BTUH
ARCHITECT AND/OR
S5.0 CANOPY / AWNING BLOCKING ELEVATIONS D G
DOCUMENT
S
PROJECT SUMMARY
PLA
ARCHITECTURAL
DRAWINGS
A1.0 FLOOR PLAN C D G
THESE
E
A1.1 DOOR & WINDOW ELEVATIONS & SCHEDULES C D
R
A2.0 EQUIPMENT AND SEATING PLAN D E F G H
REM
A2.1 EQUIPMENT SCHEDULE C D E F G H
WIND SPEED: 90 M.P.H. / EXPOSURE B A3.0 ROOF PLAN D F G
A4.0 EXTERIOR ELEVATIONS C D E G
A4.1 EXTERIOR ELEVATIONS D G
EARTHQUAKE ZONE: 2B A5.0 WALL SECTIONS C D G
A5.1 WALL SECTIONS D
A5.2 WALL SECTIONS C D G
ROOF LIVE LOAD: 20 P.S.F. A6.0 CONSTRUCTION DETAILS - EXTERIOR C D
A6.1 CONSTRUCTION DETAILS - DOOR / WINDOW D
A6.2 CONSTRUCTION DETAILS - WALL D
DESIGN CRITERIA A6.3 FINISH DETAILS D
A6.4 CONSTRUCTION DETAILS - INTERIOR C D
A7.0 FLOOR FINISH PLAN D G CONSULTANT'S
A7.1 REFLECTED CEILING PLAN C D
A7.2 FINISH SCHEDULE D E
G SEAL
A8.0 INTERIOR ELEVATIONS - DINING ROOM D E
A8.1 INTERIOR ELEVATIONS, ENLARGED RESTROOM & OFFICE PLAN D E G
A8.2 INTERIOR ELEVATIONS - KITCHEN C D E G H
A8.3 INTERIOR ELEVATIONS - KITCHEN D G H
ACCESSIBILITY
REFER TO CIVIL DRAWINGS. ADA1.0 ACCESSIBILITY REQUIREMENTS C D
ADA1.1 ACCESSIBILITY REQUIREMENTS D
LEGAL DESCRIPTION MECHANICAL
M1.0 MECHANICAL SCHEDULES AND NOTES C D
M2.0 DUCT AND DIFFUSER PLAN C D G
A. ALL WORK SHALL CONFORM TO THE 2006 EDITION OF THE INTERNATIONAL BUILDING CODE, AND ALL OTHER NAME ROOM NAME X ELEV. LETTER
OWNER ARCHITECT M3.0 HOOD DRAWINGS - PLANS AND SECTIONS D
APPLICABLE CODES, STANDARDS, AND REGULATIONS OF THE CITY OF ____________ AND COUNTY OF TACO BELL (Name)
___________. 1 AX.X ELEV. SHEET (Address) M4.0 MECHANICAL & HOOD DETAILS C D
(Address)
SHEET NUMBER (City, State, Zip) (City, State, Zip)
DOOR NUMBER
B. IT IS INTENDED THAT A COMPLETE OCCUPIABLE BUILDING PROJECT IS PROVIDED.
4 AX.X 2 Phone: Contact: PLUMBING
Phone:
ELEVATION NUMBER X WINDOW NUMBER / DECOR ITEM NUMBER P1.0 PLUMBING SCHEDULES AND NOTES F
C. THE GENERAL CONDITIONS OF THE CONTRACT FOR CONSTRUCTION (A.I.A. A201 LATEST EDITION) ARE A PART
OF THESE CONTRACT DOCUMENTS. A COPY IS ON FILE AT THE ARCHITECT'S OFFICE. P2.0 WASTE AND VENT PLAN G
3 X EXTERIOR WALL FINISH NUMBER CONSTRUCTION MANAGER STRUCTURAL ENGINEER P3.0 WATER AND GAS PLAN G
(Name) (Name) C MISC. CHANGES 9.06.13
D. DRAWINGS ARE BASED ON A SURVEY, DATED _______ PREPARED BY _________ AND IS INCLUDED IN THESE P4.0 PLUMBING ROUGH-IN PLAN E G
8'-4" CEILING HEIGHT (Address) (Address)
DOCUMENTS. X KEY NOTE P5.0 RISER DIAGRAMS C D G D MISC.CHANGES 10.25.13
(City, State, Zip) (City, State, Zip)
Contact: Contact: P6.0 PLUMBING DETAILS D E
E. THIS BUILDING HAS BEEN DESIGNED IN ACCORDANCE WITH THE RECOMMENDATIONS OF A GEOTECHNICAL X-000 EQUIPMENT NUMBER E PROTOTYPE UPDATES 12.9.13
INVESTIGATION DATED ________________ BY ________________. THE REPORT IS PART OF THESE CONTRACT BLDG. SECTION LETTER Phone: Phone:
X F PROTOTYPE UPDATES 12.17.13
DOCUMENTS, AND THE CONTRACTOR IS RESPONSIBLE FOR CARRYING OUT ITS RECOMMENDATIONS, THOUGH XX ROOM FINISH NUMBER
SOME MAY NOT BE SPECIFICALLY DETAILED ON THE PLANS. AX.X
BLDG. SECTION SHEET
CIVIL ENGINEER MECH. / ELEC. ENGINEER ELECTRICAL G PROTOTYPE UPDATES 1.30.14
(Name) (Name) E1.0 SITE ELECTRICAL PLAN E G
F. DO NOT SCALE THESE DRAWINGS. VERIFY ALL DIMENSIONS AND CONDITIONS IN THE FIELD. ANY H PROTOTYPE UPDATES 3.10.14
DISCREPANCIES IN THESE DRAWINGS SHALL BE BROUGHT TO THE ATTENTION OF THE ARCHITECT PRIOR TO DETAIL NUMBER X INTERIOR ELEVATION DESIGNATION (Address) (Address) E2.0 RISER DIAGRAM AND LEGEND C D
(City, State, Zip) (City, State, Zip)
STARTING WORK. X E2.1 PANEL SCHEDULES AND LOAD SUMMARY C D
DIRECTION OF DETAIL Contact: Contact:
AX.X SHEAR WALL TYPE (STRUCTURAL) Phone: Phone: E3.0 POWER FLOOR PLAN C D G
X
G. ALL PROPOSED SUBSTITUTIONS SHALL BE APPROVED BY THE YUM BRANDS CONSTRUCTION MANAGER, IN DETAIL SHEET E3.1 ENLARGED POWER PLAN AND DETAILS G
WRITING, PRIOR TO INSTALLATION. E3.2 POWER ROOF PLAN CONTRACT DATE: XX.XX.XX
X REVISION NUMBER XXX 000 EQUIPMENT / FIXTURE NUMBER (M.E.P.) GEOTECHNICAL ENGINEER LANDSCAPE ARCHITECT E4.0 LIGHTING PLAN & SCHEDULE C
G
H. RETAIN THE PROJECT GEOTECHNICAL ENGINEER TO PROVIDE OBSERVATION AND TESTING SERVICES DURING (Name) (Name) G BUILDING TYPE: LIVE MAS MEDIUM54
(Address) (Address) E5.0 COMMUNICATIONS PLAN
THE GRADING (INCLUDING UTILITY TRENCHES) AND FOUNDATION PHASE OF CONSTRUCTION AS 0'-0" G PLAN VERSION: March 2013
RECOMMENDED IN THE GEOTECHNICAL REPORT. ALL TESTING AND INSPECTION REPORTS, INCLUDING FINAL BLDG. HEIGHT INDICATES SUSTAINABLE DESIGN (City, State, Zip) (City, State, Zip) E6.0 ELECTRICAL DETAILS
ELEV REFERENCE POINT Contact: Contact: E7.0 ELECTRICAL DETAILS
SUMMATION LETTER, SHALL BE SUBMITTED TO THE BUILDING DEPARTMENT AND OWNER. G.C. SHALL CERTIFY GREEN SITE NUMBER: XXX-XXX
PAD ELEVATION PRIOR TO START OF FOUNDATION WORK. Phone: Phone:
REFER TO STRUCTURAL, MECHANICAL, PLUMBING AND ELECTRICAL SHEETS FOR SPECIFIC SYMBOLS STORE NUMBER: XXXXX
I. SUBMIT PAY FEES AND OBTAIN ALL PERMITS ASSOCIATED WITH THE PROJECT EXCEPT GENERAL BUILDING
SCOPE OF WORK
PERMIT OR ___________ (IF APPLICABLE). THIS INCLUDES, BUT IS NOT LIMITED TO ELECTRICAL, MECHANICAL,
GENERAL DRAWING SYMBOLS PROJECT DIRECTORY IN BOOK FORMAT
PLUMBING, FIRE SPRINKLER, HOOD ANSUL, OR OTHER RELATED FIRE PERMITS, ENCROACHMENT PERMIT, ETC. TACO BELL
YUM BRANDS WILL PAY FOR "CONNECTION FEES" ASSOCIATED WITH UTILITY PERMITS. PAY FOR TEMPORARY
FACILITIES FEES AS REQUIRED TO COMPLETE THE WORK IN A TIMELY MANNER.
SEWER TELEPHONE SPECIFICATIONS 123 MAIN STREET
(Company) (Company) IN BOOK FORMAT
ANYTOWN, USA 98765
(Address) (Address)
J. PROVIDE EACH SUBCONTRACTOR WITH A COMPLETE AGENCY-PERMITTED DRAWING SET AT TIME OF
CONSTRUCTION. (City, State, Zip) (City, State, Zip)
Contact: Contact:
K. ALL ABBREVIATIONS INCLUDED FOLLOW INDUSTRY STANDARDS. CONTACT ARCHITECT IF ANY ABBREVIATIONS Phone: Phone:
ARE NOT CLEAR.
WATER ROADS
L. GC SHALL SUPPLY AND INSTALL ALL ASPECTS OF THE PROJECT DESCRIBED IN THIS DRAWING SET UNLESS (Company) (Company)
OTHERWISE NOTED. SEE SCOPE OF WORK FOR EXCEPTIONS. (Address) (Address)
M. GRAPHIC AND WRITTEN INFORMATION ON DRAWINGS SHALL BE COORDINATED
(City, State, Zip)
Contact:
(City, State, Zip)
Contact:
LIVE MAS
WITH ALL TRADES PRIOR TO INSTALLATION. MEDIUM54
Phone: Phone:
GAS OTHER
(Company) (Company)
(Address) (Address)
(City, State, Zip) (City, State, Zip)
Contact: Contact:
Phone: Phone:
TITLE SHEET
ELECTRIC OTHER
(Company) (Company)
T1.0
(Address) (Address)
(City, State, Zip) (City, State, Zip)
Contact: Contact:
Phone: Phone:
PLOT DATE:
PROJECT GENERAL NOTES VICINITY MAP UTILITY CONTACTS SHEET INDEX
CORNER DIMENSIONS
LOG TO NG -
RADUS A B C
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
15'-0" 12'-5" 4'-8" 1'-0"
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
18'-0" 12'-6" 4'-8" 1'-3"
O
R ELEMENTS
20'-0" 12'-7" 4'-8" 1'-5"
T'S PRIOR
PHx MENU BOARD
R PSITE-SPECIFIC
NOTES
EXTENSION (TPx 1. IF EXISTING OCB LOCATION IS TO BE REUSED,
REGIONAL ARCHITECTURAL PARTNER (RAP)
CONCEPTS ONLY) CENTERLINE OF OCB FOOTING CAN BE BETWEEN
1'-10" AND 2'-10" FROM THE FACE OF CURB.
IMAGE
5 PANEL SINGLE BRAND
RIO
CL 2. CENTERLINE OF CANOPY FOOTING MUST BE WITHIN
KITCHEN OPERATIONS MUST BE APPROVED
7'-0" CL
MENU BOARD (91.5" WIDE) 18" OF FACE OF CURB.
2'-8" 5 PANEL
CONSTRUCTION.
3. ALL AREAS OF THE MB MUST BE VISIBLE TO DRIVER PHx MENU BOARD
L
NSTHE
CL LOCATED AT OCB. ASUME DRIVERS LOCATION IS 24" SINGLE BRAND
ITH MEFOR
U
ORDER CONFIRMATION EXTENSION (TPx
FROM FACE OF CURB, CENTERED ON OCB. 6" DIA. CONCRETE MENU BOARD
BOARD (OCB), SEE 1/C1.1 CONCEPTS ONLY) (91.5" WIDE)
MODIFICATIONS THAT CHANGE
FOR FOOTING DETAIL CENTER POINT OF BASE. 4. CENTER OF MB TO BE 9'-0" TO 12'-0" FROM DRIVERS FILLED 30" HIGH
JURISDICTIONAL REQUIREMENTS
CL SEE DETAIL 1/C1.1 FOR POINT OF VIEW. BOLLARD. SEE CENTER POINT
O
CE WENGINEER
2'-6" 2'-0" CL
FOOTING DETAIL DETAIL 8/C1.0 C
I
OF BASE. SEE
C
CL
CANOPY, SEE DETAIL 1/C1.1 FOR
FACE OF CURB
THITEMPLATE
2/C1.1 FOR FOOTING CL CL FOOTING DETAIL
DETAIL CL
MUST BEIS
Delphi
2'-
HyperActive
D
Texas Digital
6"
6" DIA. CONCRETE FILLED
ARCHITECT AND/OR
CL "
30" HIGH BOLLARD. SEE 1'-0
S
CANOPY, SEE DETAIL
4'-5"
DETAIL 8/C1.0
DOCUMENT
6" CL 2'- 2/C1.1 FOR FOOTING
CL
NOT USED 17 1'- 0"
PLA
N.T.S. 0 " DETAIL
4"
CL 1'-
DRAWINGS
1'-10"
CL ORDER
1'-6"
CL CL
THESE
E
1'-6"
CONFIRMATION
1'-0"
1'-0"
R
BOARD (OCB), SEE
REM
1/C1.1 FOR FOOTING
DETAIL CL
Delphi
FACE OF CURB HyperActive
"
10
Texas Digital
1'-
CL
NOTES
1. IF EXISTING OCB LOCATION IS TO BE REUSED,
B
CENTERLINE OF OCB FOOTING CAN BE BETWEEN
ESTIMATED POSITION OF
1'-10" AND 2'-10" FROM THE FACE OF CURB.
DRIVERS HEAD ALIGNED
2. CENTERLINE OF CANOPY FOOTING MUST BE WITHIN A
WITH CENTER OF CANOPY
18" OF FACE OF CURB.
3. ALL AREAS OF THE MB MUST BE VISIBLE TO DRIVER
LOCATED AT OCB. ASUME DRIVERS LOCATION IS 24"
4.
FROM FACE OF CURB, CENTERED ON OCB.
CENTER OF MB TO BE 9'-0" TO 12'-0" FROM DRIVERS
CONSULTANT'S
POINT OF VIEW. SEAL
CL
80'-0" TO CENTER
ESTIMATED POSITION OF OF D/T WINDOW
DRIVERS HEAD ALIGNED 80'-0" TO CENTER
WITH CENTER OF OCB CL OF D/T WINDOW
TCS008B
TCS009B
NOT USED N.T.S. 18 ENLARGED MENU BOARD DETAIL @ CURVED CURB 3/8" = 1'-0" 10 ENLARGED MENU BOARD DETAIL @ STRAIGHT CURB 3/8" = 1'-0" 2
CANOPY
120V, 60Hz, 4A D MISC.CHANGES 10.25.13
USED SAME TIMED
CIRCUIT AS MENU BOARD
(1) 3/4" POWER
CONDUIT TO BLDG.
FROM CANOPY
MENU BOARD
CONTRACT DATE: XX.XX.XX
CURB
BUILDING TYPE: LIVE MAS MEDIUM54
EXTEND CONDUIT
TO ABOVE CEILING PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
DRIVE-THRU
WINDOW STORE NUMBER: XXXXX
PREFAB MAGNETIC LOOP .
IF OCB IS MOVED FROM
NOT USED N.T.S. 11 NOT USED N.T.S. 3
EXISTING LOCATION INSTALL 1'-
3" TACO BELL
MAGNETIC LOOP AS SHOWN.
123 MAIN STREET
" ANYTOWN, USA 98765
5'-0
WITH CONCRETE
1'-0"
CL 6" WIDE x 24" DEEP
(3) 1" DATA CONDUITS CONCRETE CURB
TO BLDG. (1) 3/4"
POWER CONDUIT TO
ORDER CONF BOARD.
BLDG.
SURFACE OF DRIVE
THRU LANE FINISH SURFACE LIVE MAS
(1) 1" DATA CONDUITS MEDIUM54
120V, 60Hz, 0.45A
TO BLDG. (1) 3/4"
ISOLATED GROUND
POWER CONDUIT TO
CIRCUIT ALWAYS HOT
BLDG.
(UN-TIMED) I.G.
RECEPTACLE. INSTALLED
IN BASE OF SPEAKER
POST.
FOOTING
SITE
DETAILS
YES006A
NOTE: SOLDER &
INSULATE BOTH
MAG. LOOP CONN. PREFAB MAGNETIC LOOP
(SEE SCOPE OF WORK)
LOCATE 2" BELOW TOP OF
CONCRETE PAVEMENT.
D C1.0
PLOT DATE:
DRIVE-THRU COMMUNICATIONS ISOMETRIC N.T.S. 16 NOT USED N.T.S. 12 BOLLARD DETAIL 3/4" = 1'-0" 8 NOT USED N.T.S. 4
NOTE:
BOLT PATTERN PROVIDED AS CONDUIT SCHEDULE
-
EXAMPLE - OBTAIN ANCHOR
LOG TOTING
BOLT TEMPLATE FROM
PROJECTS.
MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
SUPPLIER DEVICE POWER DATA
AND ADAPTED BY A LICENSED
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
FOR THIS BUILDING TYPE. THESE
IN
O
IOR ELEMENTS
T'S PRIOR
H C FORPSITE-SPECIFIC
DIRECTIONAL SIGN
4" MENU/PREVIEW BOARD
REGIONAL ARCHITECTURAL PARTNER (RAP)
EVOLUTION PORTAL, SEE 6"
MENU/PREVIEW BOARD EQ. EQ.
IMAGE
6/C1.1 FOR FOOTING
KITCHEN OPERATIONS MUST BE APPROVED
DETAIL
ONSTHE R
DIRECTIONAL SIGN
CONSTRUCTION.
CONDUIT. SEE SCHEDULE
L
FOR REQUIREMENTS
U
R
IMTO
E
MODIFICATIONS THAT CHANGE
T.O. FOOTING TO BE
JURISDICTIONAL REQUIREMENTS
EPL MUST BEISREVIEWED
1" BELOW GRADE
E WENGINEER
L A
ANCHOR BOLTS: (4) 21" DIA. @
THITEMPLATE
C
DIRECTIONAL SIGNS (4) 34" DIA. @
T
MENU BOARD FULL THREAD
I
1'-0"
D
ARCHITECT AND/OR
S
C
DOCUMENT
DRAWINGS
A
GRADE
THESE
FACE OF CURB
R
REM
(3) #3 TIES @ 2" O.C.
(4) #5 BARS VERT. W/ (4) #3
TIES @ 12" O.C.
NOTE:
ALL CONDUIT TO BE MIN. 12"
BELOW GRADE OT LOCAL FROST
DEPTH AND PROJECT 3" ABOVE
FOUNDATION
CONSULTANT'S
DIRECTIONAL SIGN BARS
SEAL
8" DIA. ORDER CONF. BOARD BARS
12" DIA.
MENU/PREVIEW BOARD BARS
DIRECTIONAL SIGN FOUNDATION 14"DIA.
ORDER CONF. BOARD FOUNDATION
12" DIA.
MENU/PREVIEW BOARD FOUNDATION
18" DIA
18" DIA.
PORTAL PLACEMENT DETAIL 1/2" = 1'-0" 3 MENU BOARD FOOTING 1:16 SCALE 1
10" (STD)
3 11" (WIND) 10"
1'-0"
4" STL. BASE PLATE (
11" STD)
1 (WI
4" STL. LEVELING PLATE ND
)
3
4" SPACE. NO GROUT
10"
6"
921" BOLT CIRCLE (STD)
11" BOLT CIRCLE (+100
MPH WIND)
9"
3
4"STL. BASE PLATE (STD) CANOPY
1" (100+ MPH WIND LOADS) ON
A 41" THK. LEVELING PLATE. 1'-0"
1" DIA. BOLT HOLES (STD)
141" DIA. BOLT HOLES (WIND)
4"
8"
4" SQ. STL. LIGHT POLE
(STANDARD) BASE PLATE
5" SQ. STL. POLE (100+
8"
WIND LOAD AREAS)
3" x 3" HOLE IN BASE AND PORTAL
LEVELING PLATE FOR CONDUIT
2" HAND HOLE CONTRACT DATE: XX.XX.XX
ACCESS
W/ COVER
BUILDING TYPE: LIVE MAS MEDIUM54
12" ABOVE BOLTS MIN.
BASE EMBEDDMENT 24" PLAN VERSION: March 2013
3
(4) 4"X24"X4"
ANCHOR BOLTS W/ SITE NUMBER: XXX-XXX
2-3/4" MIN. BOLT PROJECTION T.O. FOOTING TO BE
1" BELOW GRADE. 9" STORE NUMBER: XXXXX
(STD).
2'-6"
(4) 1"X36"X4" ANCHOR BOLTS W/
321" MIN. BOLT PROJECTION (100+
MPH WINDS) GRADE TACO BELL
1"
2'-6" HIGH RIGID FIBER FORM 123 MAIN STREET
12"
(SONOTUBE) FORM FILLED WITH ANYTOWN, USA 98765
#6 REBAR W/ #3
CONCRETE.
REBAR TIES (TYP.) CL
TOP OF PAVEMENT
6'-0" CANOPY DEPTH
5'-0" PORTAL DEPTH
FROST DEPTH
1
(4) #5 BARS w/ #3 TIES @ 12" - 2
SUPPLY
LOCATE ALTERNATE LOCATIONS
(FOR CANOPY ONLY)
FROM A.B.
LIVE MAS
2'-0"
3
4"
HEAVY WALL CONDUIT EXTEND
BELOW LOCAL
TO BUILDING ELECT. SERVICE MEDIUM54
NOTES
1. FOUNDATION SHOWN IS A TYP.
DESIGN. WIND LOADS OF MORE SITE
THAN 100 MPH & UNSTABLE SOIL
R
DETAILS
5'-0" MINIMUM O
CONDITIONS MAY REQUIRE AN 72" DEEP
ECP-Footing
ALTERNATE DESIGN. VERIFY FOUNDATION (@
CONDITION OF SOILS WITH SOILS 0.33 CU. YD.
REPORTS. CONCRETE)
FOUNDATION
2. FOUNDATIONS SHALL EXTEND
BELOW FROST DEPTH PER LOCAL
CODES.
1'-0"
1'-6"
C1.1
PLOT DATE:
NOT USED 20 NOTE USED 16 LIGHT POLE FOOTING N.T.S. 12 EVOLUTION FOOTINGS 1:16 SCALE 2
4 3 3
5 4
2
7
5 1 2
3
4
4
1
7 7
6
1
6 CONSULTANT'S
5
SEAL
BOLLARD MENU BOARD
OCB/CANOPY 4 5 5 6 5
1 5
OCB/CANOPY MENU BOARD
1
BOLLARD CONC. CURB
CONC. CURB
LANDSCAPE @ CURVE LANDSCAPE @ STRAIGHT
1
5
REGION 1 - SOUTHWEST REGION 2 - SOUTH REGION 3 - NORTHWEST REGION 4 - WEST REGION 5 - MIDWEST REGION 6 - NORTH
NO. MATERIAL QTY SIZE HGT. SP MATERIAL QTY SIZE HGT. SP MATERIAL QTY SIZE HGT. SP MATERIAL QTY SIZE HGT. SP MATERIAL QTY SIZE HGT. SP MATERIAL QTY SIZE HGT. SP
1 HAMELIN GRASS PER 3 GAL. 12" 12" HAMELIN GRASS PER 3 GAL. 12" 12" HAMELIN GRASS PER 3 GAL. 12" 12" BLUE FESCUE PER 3 GAL. 12" 12" BLUE FESCUE PER 3 GAL. 12" 12" BLUE FESCUE PER 3 GAL. 12" 12"
PENNISTETUM ALOPE CUROIDES PLAN PENNISTETUM ALOPE CUROIDES PLAN PENNISTETUM ALOPE CUROIDES PLAN FESTUCA GLAUCA PLAN PLAN PLAN
FESTUCA GLAUCA FESTUCA GLAUCA
2 MOCK ORANGE PER 15" 15"
DWARF YAUPON HOLLY PER 15" 15" DWARF YAUPON HOLLY PER 15" 15"
RED YUCCA PER 15" 15" JAPANESES BARBERRY PER 15" 15" CRANBERRY BUSH PER 15" 15"
3 GAL. 3 GAL. 3 GAL. 3 GAL. 3 GAL. 3 GAL.
PITTOSPORUM TOBIRA PLAN LLEX VOMITORIA NANA PLAN LLEX VOMITORIA NANA PLAN HESPERALOE PARVIFLORA PLAN BERBERIS THUNBERGII PLAN VIBURNUM OPULUS PLAN
3 HESPERALOE PARVIFLORA PER 5 GAL. 18" 15" OUR LORD"S CANDLE PER 5 GAL. 18" 36" OUR LORD"S CANDLE PER 5 GAL. OUR LORD"S CANDLE PER 5 GAL. SOAPWEED PER 5 GAL. ADAM'S NEEDLE PER 5 GAL.
RED YUCCA PLAN YUCCA WHIPPLEI PLAN YUCCA WHIPPLEI PLAN YUCCA WHIPPLEI PLAN YUCCA GLAUCA PLAN YUCCA FILAMENTOSA PLAN
CONTRACT DATE: XX.XX.XX
PER 5 GAL. DWARF GOLDEN ARBORVITAE PER DWARF GOLDEN ARBORVITAE PER DWARF GOLDEN ARBORVITAE PER PER PER
4 DWARF GOLDEN ARBORVITAE 24" 24" 5 GAL. 24" 24" 5 GAL. 24" 24" 5 GAL. 24" 24" DWARF GOLDEN ARBORVITAE 5 GAL. 24" 24" DWARF GOLDEN ARBORVITAE 5 GAL. 24" 24" BUILDING TYPE: LIVE MAS MEDIUM54
THUJA OCCIDENTALIS 'RHEINGOLD' PLAN THUJA OCCIDENTALIS 'RHEINGOLD' PLAN THUJA OCCIDENTALIS 'RHEINGOLD' PLAN THUJA OCCIDENTALIS 'RHEINGOLD' PLAN THUJA OCCIDENTALIS 'RHEINGOLD' PLAN PLAN
THUJA OCCIDENTALIS 'RHEINGOLD'
PLAN VERSION: March 2013
5 SAND STONE BOULDER PER GRANITE BOULDER PER GRANITE BOULDER PER GRANITE BOULDER PER LIMESTONE BOULDER PER LIMESTONE BOULDER PER
6"-24" N/A 6"-24" N/A 6"-24" N/A 6"-24" N/A 6"-24" N/A 6"-24" N/A SITE NUMBER: XXX-XXX
DESERT SAND COLOR - 6" TO 24" PLAN DESERT RED COLOR - 6" TO 24" PLAN SAND -GREY - 6" TO 24" PLAN SAND -GREY - 6" TO 24" PLAN SAND -GREY - 6" TO 24" PLAN SAND -GREY - 6" TO 24" PLAN
STORE NUMBER: XXXXX
6 GRAVEL MULCH PER 3" N/A
GRAVEL MULCH PER 3" N/A
GRAVEL MULCH PER 3" N/A
GRAVEL MULCH PER 3" N/A
GRAVEL MULCH PER 3" N/A
GRAVEL MULCH PER
3" N/A
CALIFORNIA GOLD - 3" AGGREGATE PLAN RED GRANITE - 3" AGGREGATE PLAN GREY GRANITE - 3" AGGREGATE PLAN GREY GRANITE - 3" AGGREGATE PLAN LIMESTONE - 3" AGGREGATE PLAN LIMESTONE - 3" AGGREGATE PLAN
7 STEEL EDGING 3" AFG 3" AFG 3" AFG STEEL EDGING 3" AFG 3" AFG 3" AFG
TACO BELL
PER N/A STEEL EDGING PER N/A STEEL EDGING PER N/A PER N/A STEEL EDGING PER N/A STEEL EDGING PER N/A
N/A N/A N/A N/A N/A N/A
PLAN 6" BFG PLAN 6" BFG PLAN 6" BFG PLAN 6" BFG PLAN 6" BFG PLAN 6" BFG 123 MAIN STREET
ANYTOWN, USA 98765
REGION 7 - SOUTHEAST MATERIALS LEGEND LANDSCAPE NOTES
NO. MATERIAL QTY SIZE HGT. SP 1. GRAVEL MULCH SHALL BE CONTINUOUS TO EDGE OF STEEL BORDER & CONCRETE CURB. ALSO UNDER ALL PLANTS
INDIAN HAWTHORNE PER 3 GAL. 1 4 7
1 PLAN
12" 12"
RAPHIOLEPIS INDICA 'PINK LADY' 2. PROVIDE WEED BARRIER UNDER GRAVEL MULCH
2 CHINESE HOLLY
LLEX CORNUTA
PER
PLAN
3 GAL. 15" 15" 3. PROVIDE A INDUSTRY STANDARD DRIP IRRIGATION SYSTEM APPROPRIATE FOR THE SELECTED REGION AND PLANTING TYPES LIVE MAS
MEDIUM54
3 SPANISH BAYONET PER 5 GAL. 4. PLANTS SHALL BE PLANTED PER REGIONAL BEST PRACTICES INCLUDING BUT NOT LIMITED TO SUPPORT, DEPTH/WIDTH OF PLANTING HOLE AND
YUCCA ALOIFOLIA PLAN 2 5 SOIL AMMENDEMENTS
PER 5 GAL. 24"
SITE
4 DWARF GOLDEN ARBORVITAE
PLAN
24" 5. SEE SHEET C1.0 AND C1.1 FOR ADDITIONAL TACO BELL SPECIFIC DETAILS INCLUDING THE MENU BOARD, ENTRY PORTALL AND OCB/CANOPY.
THUJA OCCIDENTALIS 'RHEINGOLD'
LIMESTONE BOULDER
LANDSCAPE
5 PER N/A
6"-24"
SAND -GREY - 6" TO 24" PLAN PLAN
6 GRAVEL MULCH PER 3
PLAN
3" N/A 6
RED GRANITE - 3" AGGREGATE
L1.0
L001
PER 3" AFG
7 STEEL EDGING N/A N/A
PLAN 6" BFG
PLOT DATE:
LANDSCAPE PLAN, SCHEDULES AND NOTES N.T.S. A
G
72'-101 2"
G
F
1'-412" 1'-1012" 9'-412" 2'-1" 9'-412" 10'-7" 4'-0" 34'-212"
G
23'-3" 9'-6" 10'-3" 14'-112" 14'-5"
(1) 2x6 TRIMMER 4
STUD W/ (3) 2x6 S4.0
4
KING STUDS (1) 2X6 TRIMMER STUD
S4.0
W/ (2) 2X6 KING STUDS
(1) 2X6 TRIMMER STUD 6 6 6 TYP. 5 6 (2) 2X6 KING STUDS
G
4"
W/ 6x6 POST 6x6 POST
198' 0" E
912"
H
11"
4
10
2 FS 1 S4.0
5'-7"
8 (1) 2X6 TRIMMER STUD (3) 2X6 KING STUDS
7
4'-3"
S4.0 (3) 2X6 KING S4.0
W/ (2) 2X6 KING STUDS
STUDS, TYP. 3 TYP. 1 8'-0"
(1) 2X6 TRIMMER STUD 1
W/ 6x6 POST
D FS 9 6
8 TYP.
9"
D
S4.0 5
13'-0"
7 9
4 FD FD FD
612"
8 9
S4.0
H
5'-8"
1
3
S4.0 9
1 1 S4.0 D
6x6 POST 1 FS
G
TYP. 3
24'-1"
27'-5"
27'-11"
FD FD FD
20'-8"
57' 2"
(3) 2X6 KING 3 TYP.
STUDS, TYP. 1 CONSULTANT'S
21'-712"
1
SEAL
D
9
15'-1112"
1 FD
7 FD
S4.0 C
FS
1 5 9
S4.0 S4.0
TYP. 5 (1) 2X6 TRIMMER STUD FD
SI
M
W/ (3) 2X6 KING STUDS (3) 2X6 KING
.
STUDS
(2) 2X6 TRIMMER STUDS (2) 2X6 TRIMMER STUDS
W/ (2) 2X6 KING STUDS W/ (2) 2X6 KING STUDS (2) 2X6 KING
3 TYP.
6 FD STUDS
(2) 2X6 KING STUDS
1'-6"
HD
11"
TYP. (2) 2X6 KING STUDS 2
6"
5
(3) 2X6 KING 6 6
(1) 2X6 TRIMMER STUD STUDS, TYP. 3 6 1 (1) 2X6 TRIMMER STUD 3
B D MISC.CHANGES 10.25.13
W/ (3) 2X6 KING STUDS S4.0 S4.0 W/ (2) 2X6 KING STUDS S4.0
G PROTOTYPE UPDATES 1.30.14
(1) 2X6 TRIMMER STUD H PROTOTYPE UPDATES 3.10.14
W/ (2) 2X6 KING STUDS
34'-712" 14'-2" 12'-912" 8'-412" G 1'-612"
G G
6'-612" G 10'-512" 6"
24'-5" 26'-3" 3'-10"
72'-0"
G
A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
FOUNDATION PLAN 1/4"=1'-0" A
TACO BELL
DESIGN CRITERIA: SEISMIC LOADS: CONCRETE: 1 1
SLAB SHALL BE PITCHED 2" FOR 5'-0" x 5'-0" SQUARE AT ALL FLOOR DRAINS U.O.N.
2006 INTERNATIONAL BUILDING CODE SEISMIC USE GROUP: 1 FOUNDATION OTHER UNDESIRABLE MATTER SHOULD BE REMOVED AND STRIPPED TO A DEPTH OF 6 INCHES. 123 MAIN STREET
A. CONCRETE SHALL BE HARD ROCK CONC. (5 SACK CEMENT PER CU.YD. MIN.) AND MEET REFER TO PLUMBING DRAWINGS FOR LOCATIONS.
4. EXCAVATION OF UP TO FIVE (5.0) FEET OF THE EXISTING IN-SITU FILL IN THE PROPOSED BUILDING AREA
SESMIC IMPORTANCE FACTOR: 1.0 1. FOUNDATION DESIGN IS BASED UPON THE GEOTECHNICAL ENGINEERING REPORT ENTITLED "REPORT CAN BE EXPECTED. A REPRESENTATIVE OF THE GEOTECHNICAL ENGINEER SHOULD VERIFY THE
THE FOLLOWING MIN. ULTIMATE COMPRESSIVE STRENGTHS AT 28 DAYS: ANYTOWN, USA 98765
MIN. STRENGTH AGGREGATE SLUMP
ROOF LOADS: SITE CLASS: D NAME HERE" BY "COMPANY NAME HERE" DATED "DATE HERE". PROJECT NO. ######. DEPTH OF REMOVAL AT THE TIME OF CONSTRUCTION. 2 PROVIDE HUB DRAIN (HD) UNLESS REQUIRED BY LOCAL CODE TO HAVE FLOOR SINK
LOCATION 28 DAYS PSI SIZE - INCHESS INCHES TOLERANCE
LIVE LOAD: 20 PSF 2. CONTRACTOR TO PROVIDE FOUNDATION & FOOTING AS REQUIRED FOR PYLON OR MONUMENTAL SIGN. 5. THE EXPOSED SUBGRADE SHOULD BE PROOF-ROLLED TO LOCATE ANY SOFT OR LOOSE AREAS IN (FS).
DEAD LOAD: 15 PSF MAPPED SPECTRAL RESPONSE ACCEL: SEE ELECTRICAL DRAWINGS FOR DETAIL. ACCORDANCE WITH ITEM 216 OF TxDOT SPECIFICATIONS. SOILS THAT ARE OBSERVED TO RUT OR
3. COORDINATE STRUCTURAL PLANS AND DETAILS WITH REQUIREMENTS OF GEOTECHNICAL REPORT. DEFLECT UNDER THE MOVING LOAD SHOULD BE UNDERCUT. THE PROOF ROLLING AND
Ss: 0.118 FOUNDATION DESIGN IS BASED ON 1,500 PSF ALLOWABLE BEARING CAPACITY. UNDERCUTTING ACTIVITIES SHOULD BE WITNESSED BY A REPRESENTATIVE OF THE GEOTECHNICAL
B. CONCRETE MIX DESIGN AND TESTING SHALL MEET WITH THESE SPECS. CEMENT SHALL BE 3 INDICATES INSIDE SURFACE OF FOOTING. SEE SHEET S4.0.
IN ACCORDANCE WITH ASTM C 150 TYPE II. VERIFY MIN. CONC. STRENGTH AND CEMENT
WIND LOADS: S1: 0.051 4. CONTRACTOR SHALL TREAT SOIL BELOW SLAB FOR TERMITES. ENGINEER. TYPE.
3 SECOND GUST: 90 MPH 5. REFER TO THE GEOTECHNICAL REPORT FOR GENERAL REQUIREMENTS OF EARTHWORK, 6. AFTER PROOFROLLING, THE UPPER 6 INCHES OF THE SUBGRADE SHOULD BE SCARFIED, MOISTURE C. REINFORCING STEEL SHALL CONFORM TO ASTM A-615, GRADE 60. STEEL SHALL BE KEPT 4 HTT5 HOLDOWN ANCHOR. SEE 6/S4.0 FOR HOLDOWN EMBEDMENT DETAIL.
IMPORTANCE FACTOR: 1.0 SPECTRAL RESPONSE COEFF.: OVEREXCAVATION, SUBGRADE PREPARATION, FILL AND COMPACTION, WATERPROOFING AND OTHER CONDITIONED TO A RANGE BETWEEN +1 TO +3 PERCENTAGE POINTS ABOVE THE OPTIMUM MOISTURE CLEAN AND FREE OF RUST.
PERTINENT REQUIREMENTS AND INFORMATION. VALUE, AND COMPACTED TO AT LEAST 95 PERCENT OF MAXIMUM DRY DENSITY AS DETERMINED BY
EXPOSURE CATEGORY (MWFRS): B SHORT PERIODS (SDS): 0.126 6. PROTECT PIPES AND CONDUITS RUNNING THROUGH WALLS AND SLABS WITH 1/2 INCH EXPANSION ASTM D-698.
D. CONCRETE CURING SHALL BE IN ACCORDANCE WITH REQUIREMENTS OF ACI-318-95 5 ANCHOR BOLTS LOCATED THROUGHOUT PERIMETER OF BUILDING SHALL BE
1 SEC. PERIODS (SD1): 0.081 MATERIAL. LOWER CONTINUOUS FOOTINGS AND GRADE BEAMS PERPENDICULAR TO PIPE RUNS TO
ALLOW PIPES TO PASS ABOVE THE FOOTINGS OR THROUGH THE GRADE BEAMS. ALTERNATIVELY,
7. AFTER SUBGRADE PREPERATION IS COMPLETE, THE PLACEMENT OF STRUCTURAL FILL MAY BEGIN.
THE STRUCTURAL FILL MATERIALS SHOULD BE FREE OF ORGANICS OR OTHER DELETERIOUS E.
SECTION 5.11 AND STANDARD PRACTICE FOR CURING CONCRETE REPORTED BY
COMMITTEE 308.
ANCHOR BOLTS - A36 OR A307, USE 5/8" DIAMETER x 12" ANCHOR BOLTS (A.B.) AT 72" O.C.
PROVIDED AS REQUIRED PER THE "PLATE/ANCHOR BOLT" COLUMN OF THE "WALL
SHEATHING AND SHEARWALL SCHEDULE." SEE D/S2.0.
LIVE MAS
WOOD SHEAR WALLS PROVIDE A CONCRETE JACKET IF PIPES ARE LOW ENOUGH TO BE PLACED BELOW THE FOOTINGS AND MATERIALS AND SHOULD HAVE A MAXIMUM PARTICLE LESS THAN 2-INCHES. THE STRUCTURAL FILL U.O.N. ANCHOR BOLTS SHALL BE TIED IN PLACE PRIOR TO PLACEMENT OF CONC.
MEDIUM54
GRADE BEAMS. LOWER FOOTINGS AND GRADE BEAMS PARALLEL TO PIPE RUNS TO AVOID SURCHARGE MATERIAL SHOULD HAVE A LIQUID LIMIT LESS THAN 35 AND A PLASTICITY INDEX BETWEEN 6 AND 15.
RESPONSE MOD. FACTOR (R): 6.5 ONTO ADJACENT TRENCH EXCAVATIONS. THE FILL SHOULD BE PLACED IN COMPACTION CONTROLLED 8 INCH HORIZONTAL LIFTS AND SHOULD BE 6 HDU5 HOLDOWN ANCHOR AT EACH END OF SHEARWALL. SEE 6/S4.0 FOR HOLDOWN
SLAB:
7. MAINTAIN SUBGRADE AND FILL MOISTURE CONTENT UNTIL FOUNDATIONS ARE PLACED. COMPACTED WITHIN THE RANGE OF -2 TO +3 PERCENTAGE POINTS ABOVE THE OPTIMUM MOISTURE A. DESIGN IS BASED UPON 4" THICK CONCRETE SLAB REINFORCED W/ WWF 6x6-W1.4x1.4 OR EMBEDMENT DETAIL.
DESIGN BASE SHEAR (V): 0.02W 8. ARRANGE FOR OWNER'S INDEPENDENT TESTING AGENCY TO MONITOR CUT AND FILL OPERATIONS AND CONTENT VALUE, AND COMPACTED TO AT LEAST 95 PERCENT OF MAXIMUM DRY DENSITY AS #4 BARS @ 18" O.C. EA. WAY, OVER 6 MIL VISQUEEN MEMBRANE, OVER 2" SAND BED, OVER
PERFORM FIELD DENSITY AND MOISTURE CONTENT TESTS TO VERIFY COMPACTION AND APPROVE DETERMINED BY ASTM D-698. EACH LIFT OF STRUCTURAL FILL SHOULD BE TESTED BY A 4" AGGREGATE BASE, OVER ENGINEERED SUBGRADE. MODIFY AS REQUIRED TO COMPLY 7 HHDQ14-SDS2.5 HOLDOWN ANCHOR AT EACH END OF SHEARWALL. SEE 6/S4.0 FOR
FOOTING SUBGRADES PRIOR TO PLACING CONCRETE. REPRESENTATIVE OF THE GEOTECHNICAL ENGINEER.
ANALYSIS BY SIMPLIFIED PROCEDURE 9. DO NOT PLACE FOOTINGS OR SLABS AGAINST SUBGRADE CONTAINING FREE WATER, FROST, OR ICE. 8. THE EXPOSED SUBGRADE SHALL BE PROTECTED AGAINST EXCESSIVE DRYING OR EXPOSURE TO
WITH REQUIREMENTS OF SOILS REPORT. HOLDOWN EMBEDMENT DETAIL.
10. MAINTAIN PROPER SITE DRAINAGE DURING CONSTRUCTION TO ENSURE SURFACE RUNOFF AWAY FROM
STRUCTURES AND TO PREVENT PONDING OF SURFACE RUNOFF NEAR THE STRUCTURES.
MOISTURE. THE SITE SHALL BE GRADED TO PREVENT PONDING OF WATER WITHIN EXCAVATED AREAS.
ACCUMULATED WATER SHALL BE REMOVED IMMEDIATELY. EXCAVATIONS FOR FOUNDATIONS SHOULD
MISCELLANEOUS:
A. DIMENSIONS NOTED ARE TO FACE OF CONCRETE. REFER TO DWG. A1.0 FOR 8 HD19 HOLDOWN ANCHOR AT EACH END OF INTERIOR SHEARWALL. SEE 6/S4.0 FOR
FOUNDATION
BE FILLED WITH CONCRETE BEFORE THE END OF THE WORKDAY OR SOONER IF NECESSARY TO DIMENSIONS TO FACE OF STUD AND OTHER DIMENSIONS NOT OTHERWISE NOTED. HOLDOWN EMBEDMENT DETAIL.
PROVIDE SHOP DRAWINGS AND CALCULATIONS BY REGISTERED ENGINEER FOR SIGNS
AND AWNINGS
SUBGRADE PAD PREPARATION RECOMMENDATIONS PREVENT DETERIORATION OF THE BEARING SURFACE. IF DELAYS OCCUR, THE EXCAVATION SHOULD
BE DEEPENED AS NECESSARY AND CLEANED, IN ORDER TO PROVIDE A FRESH BEARING SURFACE. IF
B. DRAWINGS SHALL NOT BE SCALED. ALL DIMENSIONS AND FIT SHALL BE DETERMINED
AND VERIFIED BY THE CONTRACTOR PRIOR TO COMMENCEMENT OF WORK.
PLAN
1. THESE SUMMARY RECOMMENDATIONS ARE PROVIDED FROM THE GEOTECHNICAL INVESTIGATION. MORE THAN 24 HOURS OF EXPOSURE OF THE BEARING SURFACE IS ANTICIPATED IN THE EXCAVATIONS, C. DETAILS NOT FULLY OR SPECIFICALLY SHOWN SHALL BE OF SAME NATURE AS OTHER 9 INTERIOR WALLS (TYP.) SEE SHEET S2.0
2. UNLESS SPECIFICALLY INDICATED OTHERWISE IN THE DRAWINGS, THE LIMITS OF THIS SUBSURFACE A MUD SLAB SHOULD BE USED TO PROTECT THE BEARING SURFACES. IF A MUD SLAB IS USED, THE SIMILAR CONDITIONS.
PREPARATION ARE CONSIDERED TO BE THAT PORTION OF THE SITE DIRECTLY BENEATH THE BUILDING FOUNDATION EXCAVATIONS SHOULD INITIALLY BE OVER-EXCAVATED BY APPROXIMATELY 4 INCHES D. SEE PLUMB. DWGS. FOR PLUMB. LAYOUT DIMENSIONS, U.O.N.
S1.0
AND FIVE FEET BEYOND. BUILDING IS REFERRING TO AND INCLUDES ALL AREAS AS SHOWN ON SHEET AND A LEAN CONCRETE MUD SLAB OF APPROXIMATELY 4 INCHES IN THICKNESS IS PLACED IN THE E. SEE ELECT. DWGS. FOR ELECT. LAYOUT DIMENSIONS, U.O.N.
S1.0. THE VAPOR RETARDER, WHERE REQUIRED, DOES NOT EXTEND BEYOND THE LIMITS OF THE BOTTOM OF THE EXCAVATIONS IMMEDIATELY FOLLOWING EXPOSURE OF THE BEARING SURFACE. F. COORD. FOUNDATION AND SLAB LAYOUT WITH OTHER TRADES PRIOR TO POURING
ACTUAL BUILDING. 9. THIS PAD PREPARATION DOES NOT CONSTITUTE A COMPLETE SITE WORK SPECIFICATION. REFER TO SLAB.
3. ALL VEGETATION, CONCRETE, STUMPS, BRUSH, ABANDONED STRUCTURES, ROOTS, RUBBISH, AND ANY THE GEOTECHNICAL REPORT FOR SPECIFIC INFORMATION NOT COVERED IN THIS PREPARATION.
PLOT DATE:
DESIGN CRITERIA F FOUNDATION PLAN NOTES C KEY NOTES B
F
G
72'-912"
G
1'-3"
2'-712" 70'-2"
HIGH TOWER 1'-412"
FRAMING 7" G 512"
9'-412" 2'-1" 9'-412" 10'-7" 4'-0" 5'-3" 14'-1112" 13'-6"
SHEARWALL LENGTH 6 SHEARWALL LENGTH
20 2 10 8 4 5 TYP.
S4.3 S4.2 S4.1 SHEARWALL END 8
S4.1 S4.1 4
P.
.
7 DETAIL B S4.2
M
G E
TY
SI
2 2 2 2 2 1 3
1
TYP.
10
HIGH TOWER
8
FRAMING
SHEARWALL END
SHEARWALL
S4.2 8 9 8
LENGTH
DETAIL D SHEARWALL EA. END SHEARWALL END
5'-6"
8 SHEARWALL END 8 SHEARWALL END
5'-9"
3 DETAIL A S4.2 S4.2 DETAIL C
D D S4.2 DETAIL A S4.2 DETAIL B 2 1
8'-2"
7 2 8 SHEARWALL END
S4.2 DETAIL D 1
8 SHEARWALL END
S4.2 DETAIL D
8
3
1 8
D
29'-101 2" S4.1
5 TYP.
2 11
4 TYP. 2
5 TYP.
3 S4.1
4 TYP.
SHEARWALL LENGTH
3
STUD TO STUD
STUD TO STUD
27'-4"
26'-8"
27'-4"
HIGH PARAPET FRAMING
CONSULTANT'S
1
9 SEAL
22'-2"
21'-7"
2 2
9
S4.2 2
.
M
SI
SHEARWALL END
DETAIL C C
9
2
1
2
8
2
SHEARWALL END S4.2
S4.1 8
DETAIL B 5 TYP. SHEARWALL END
8 TYP. SHEARWALL END 8 SHEARWALL END 8 DETAIL C S4.2
8 4 10
S4.2 DETAIL B S4.2 DETAIL A S4.2
S4.1 3 1
3
1 2 1
2 2 2 2 2 3 B
4 8 D MISC.CHANGES 10.25.13
P.
TY
2 10 S4.1 S4.1 7 G PROTOTYPE UPDATES 1.30.14
S4.2 S4.1
G
2'-6" 31'-8" 15'-0" 11'-10" 9'-4" 1'-1" 6"
SHEARWALL LENGTH SHEARWALL LENGTH
38'-512" G
30'-9" 2'-812"
HIGH PARAPET FRAMING HIGH PARAPET FRAMING
A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
WALL FRAMING PLAN 1/4"=1'-0" A
TACO BELL
WALL FRAMING: D
MARK BUILT-UP SECTION BUILT-UP MANUF. MEMBER SW SHEATHING EDGE FIELD PLATE / ANCHOR BOLT REMARKS A. EXTERIOR WALL NON-BEARING & BEARING STUDS SHALL BE NO. 2 SPRUCE-PINE-FIR.
D 1 COORDINATE WITH ELECTRICAL POWER PLAN SHEET E3.0. 123 MAIN STREET
INTERIOR WALL STUDS MAY BE STUD GRADE.
1 1/2" CDX PLYWD (32/16), PS1 RATING 10d @ 6" O.C. 10d @ 12" O.C. 5/8" DIA. A307 (8x3)@ 32" O.C. W/ WASHER PLYWOOD ON EXTERIOR FACE OF STUDS B. ALL BEAMS AND JOISTS SHALL BE SEAT CUT FOR FULL UNIFORM BEARING AT ANYTOWN, USA 98765
1 (3) 2x8 --
SUPPORTS, BEAM SEATS AND COLUMN CAPS. 2 INTERIOR NON-BEARING STUD WALL FRAMING; REFER TO SHEET A1.0 FOR
2 1/2" CDX PLYWD (32/16), PS1 RATING 10d @ 4" O.C. 10d @ 12" O.C. 5/8" DIA. F1554 (8x3)@ 8" O.C. W/ WASHER PLYWOOD ON BOTH SIDES OF WALL D C. SEE SHEET A1.0 FOR DIMENSIONS. DIMENSIONS AND STUD SIZES. SEE DETAIL 13 & 14/S4.1 AND WALL FRAMING NOTES.
2 (3) 2x10 -- D. EXTERIOR STUD WALLS ARE 2x6 AT 16" O.C. U.O.N.
3 1/2" CDX PLYWD (32/16), PS1 RATING 10d @ 6" O.C. 10d @ 12" O.C. 5/8" DIA. F1554 (8x3)@ 16" O.C. W/ WASHER PLYWOOD ON BOTH SIDES OF WALL E. ALL WOOD IN CONTACT WITH CONC., STEEL OR GRADE SHALL BE PRESSURE TREATED. 3 (2) 2x6 TOP PLATES - SPLICE PER 15/S4.1. U.O.N. REF. 1/S4.3 FOR CAP DETAIL.
D D
3 (3) 2x12 -- F. ALL BOLTED OR NAILED STRAP CONNECTIONS SHALL HAVE AN EQUAL NUMBER OF
BOLTS OR NAILS EACH SIDE OF THE SPLICE JOINT. THE FIRST BOLT OR NAIL FROM EACH 4 TOP OF TRUSS BEARING PLATE. SEE DETAIL 2 & 4/S4.1.
SIDE OF THE SPLICED OR TREATED MEMBER SHALL BE EQUAL DISTANCE FROM THE
SPLICE. STRAPS USING 16d NAILS ON 2x MATERIAL SHALL BE INSTALLED ON THE 1-1/2" 5 TOP OF PARAPET. SEE DETAIL 2 & 4/S4.1.
*** 1/2" CDX PLYWD (32/16), PS1 RATING 10d @ 6" O.C. 10d @ 12" O.C. 5/8" DIA. A307 (8x3) @ 48" O.C. W/ WASHER NAILING @ HEADERS PER 12/S4.1
EDGE OF THE MEMBER.
G. THE CONTRACTOR SHALL VERIFY THAT THE MOISTURE CONTENT OF ALL FRAMING 6 ENSURE ROUGH OPENING DIMENSION TO PROVIDE TOLERANCE FOR DRIVE THRU
LIVE MAS
WINDOW INSTALLATION. COORDINATE WITH WINDOW MANUFACTURER. MEDIUM54
*** REQUIREMENTS FOR EXTERIOR NON-SHEARWALL WALLS LUMBER AND PLYWOOD MEET THE REQUIREMENTS OF THE SPECS. AT THE TIME OF
INSTALLATION AND AT CLOSE-IN.
1. OSB OF COMPARABLE THICKNESS MAY BE USED IN LIEU OF PLYWOOD WHEN APPROVED 7. EDGE NAIL WALL PLY TO STUDS OR POSTS WITH HOLD-DOWNS. H. USE AT PRESSURE TREATED LUMBER AT WINDOW JAMBS, SILL AND STUDS UNDER SILL 7 EXTERIOR SHEATHING SHALL NOT BE INTERRUPTED WITH TOWER FRAMING -
NOTES:
IN WRITING BY THE PROJECT ENGINEER AND THE LOCAL JURISDICTION. 8. WHERE PANELS ARE APPLIED TO BOTH FACES OF A WALL AND NAIL SPACING IS LESS AS WELL AS ALL TOILET PLUMBING WALLS. TYPICAL.
1. BUILT-UP HEADER SECTION SHALL HAVE 1/2" PLYWOOD 2. BLOCK ALL UNSUPPORTED EDGES WITH 2x MATERIAL U.O.N. BLOCK EDGES WITH 3x THAN 6" O.C. ON EITHER SIDE, PANEL JOINTS SHALL BE OFFSET TO WALL ON DIFFERENT
MATERIAL WHERE 10d NAILING IS 3" O.C. OR LESS AND 8d NAILING IS 2" O.C. OR LESS. FRAMING MEMBERS OR FRAMING SHALL BE 3x OR THICKER AND NAILS ON EACH SIDE STUD LAYOUT: 8 INTERIOR SHEAR WALL. FRAMING FOR 2X6 STUDS, BLOCKING, & SILL PLATE SHALL
SANDWICHED PIECES. REF. 20/S4.1 D 3. ALL PLYWOOD NAILS SHALL BE COMMON WIRE. SEE SPECIFICATIONS FOR OTHER NAIL
REQUIREMENTS.
SHALL BE STAGGERED. A. LAYOUT STUDS ON SIDEWALLS (LONG WALLS) STARTING AT REAR OF BUILDING BE SOUTHERN PINE OR DOUGLAS FIR AT THIS WALL. PROVIDE 6X6 POST AT EACH
END OF WALL.
WALL FRAMING
TOWARDS FRONT.
4. EXTERIOR WALLS NOT DESIGNATED AS SHEARWALLS IN THE WALL FRAMING PLAN SHALL
MEET REQUIREMENTS INDICATED FOR NON-SHEARWALL WALLS IN THE SCHEDULE
B. LAYOUT STUDS ON ENDWALLS (SHORT WALLS) STARTING AT EACH END AND WORKING
TOWARDS CENTER. 9 COORDINATE WITH PLUMBING ROUGH IN SHEET P4.0. PLAN
ABOVE.
5. SHEARWALL LENGTHS WHERE NOTED ARE MINIMUM. DO NOT LOCATE HOLDDOWNS 10 2x FRAMING ON THICKENED CONCRETE FOUNDATION / PIER; SEE SHEETS S1.0 and
S4.0. DIMENSIONS FOR FRAMING ARE TO FACE OF STUD.
S2.0
FROM THESE DIMENSIONS. SEE ARCH DWGS FOR ACTUAL WALL LENGTHS.
6. HD REFERS TO SIMPSON STRONGTIE CO. HOLDDOWNS. INSTALL PER 16/S4.0. POST G
WIDTH SHALL MATCH STUD WALL WIDTH. SEE FOUNDATION PLAN FOR OTHER REQ'S. 11 TOP OF PLATE ELEVATION = 13'-10".
PLOT DATE:
HEADER SCHEDULE N.T.S. F WALL SHEATHING AND SHEARWALL SCHEDULE D FRAMING PLAN NOTES C KEY NOTES B
F
G 1
2'-712" 70'-2"
TOP OF PARAPET = TOP OF VERTICAL TRUSS LEG = 18'-7" A.F.F.
22'-1" A.F.F. 5'-4" G 10'-7" 512"
1'-412" 2'-3" 10 SPACES AT 2'-8" = 26'-8" 1'-1" 1'-7" 3 SPACES AT 2'-8" = 8'-0" 5 SPACES AT 2'-8" = 13'-4" 2'-2"
2 2
4 9 TYP.
20 12
4 S4.1
S4.3 S4.3
4"
5 S4.1 2 5
7
G
E
TOP OF PARAPET =
20
22'-1" A.F.F.
4
S4.3 4 12
5'-212"
5'-6"
S4.2 S4.1
17 SIM.
8'-612"
3
16
12'-512"
11 6 6
6 18 11
3'-6"
S4.1 EF 1
4 15 10 S4.1 S4.1
15
TOP OF PARAPET = 18'-10" A.F.F.
1'-3"
2'-2"
D
10
SLOPE 1/2-12
6
4'-0" (YORK ALT.)
6
6'-612" (TRANE)
1'-3"
2'-112"
2'-712"
3'-6"
DOWN
19 6 2
19'-512"
STUD TO STUD
TOP OF PARAPET = 20'-10 1/2" A.F.F.
S4.1
4"
1'-3"
27'-4"
4'-0"
1'-3" 1'-9 2"
14
4'-1"
1
1'-3"
SLOPE 3/8-12
2
19 CONSULTANT'S
ICE COND. 6
SEAL
22'-2"
S4.1 RTU 2
DOWN
3 15
6
6"
1'-912"
RTU 1 EF 2 8 20
4'-0"
14 12
4"
1'-2"
8 C
29'-1012" 6
TOP OF PARAPET = 19'-5" A.F.F.
20 1'-2" 712" 21
18
10'-9"
13
8'-8"
6
7'-512"
8'-412"
15
5'-1112"
T20-XX
T18-XX
T16-XX
T13-XX
T12-XX
T11-XX
T10-XX
T21-XX
T1-XX
T27-X
T26-X
T25-X
T24-X
T23-X
T22-X
T19-X
T17-X
T14-X
T15-X
T9-X
T8-X
T7-X
T6-X
T5-X
T4-X
T3-X
T2-X
4 12
S4.2 S4.1
6"
5 5
4 11
2 B D MISC.CHANGES 10.25.13
11 11 11 S4.1 11
13 2'-812" G PROTOTYPE UPDATES 1.30.14
71'-5"
G
30'-9" 38'-512" 2'-212"
TOP OF VERTICAL TRUSS LEG = 20'-7 1/2" A.F.F. TOP OF VERTICAL TRUSS LEG = 18'-7" A.F.F. TOP OF VERTICAL
TRUSS LEG = 19'-2" A.F.F.
EXTREME CARE SHALL BE USED IN ROOF NOT DESIGNED FOR PONDING. SEE
ERECTING ROOF TRUSSES - COMPLY WITH ARCHITECTURAL DRAWINGS FOR DRAIN A
TPI BRACING REQUIREMENTS. REQUIREMENTS. CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
ROOF FRAMING PLAN 1/4"=1'-0" A
TACO BELL
ROOF FRAMING NOTES: F. REFER TO TRUSS ELEVATIONS FOR SHAPE, OVERHANG, SLOPES, SPAN, ETC. LOCATION
TYPE NAILING / SHEATHING REMARKS A. ALL UNSUPPORTED EDGES OF PLYWOOD SHEATHING SHALL BE SUPPORTED WITH D OF BEARING POINTS ARE AS INDICATED ON THE DRAWINGS. SEE 3/S4.2.
1 STARTING POINT OF TRUSS LAYOUT - CENTERLINE OF TRUSS. 13 OUTLINE OF ALUMINUM SLAT WALL BY VENDOR 123 MAIN STREET
SIMPSON PSCL CLIPS, PROVIDE (2) CLIPS EQUALLY SPACED BETWEEN EACH
BN 10d @ 6" O.C. - TRUSS/SUPPORT. SEE DETAIL 14/S4.2. OSB OF COMPARABLE THICKNESS MAY BE USED G. MFR'D ROOF TRUSS DESIGN LOADS: SEE TRUSS DESIGN CRITERIA 4/S4.2. ANYTOWN, USA 98765
IN LIEU OF PLYWOOD WHEN APPROVED IN WRITING BY THE PROJECT ENGINEER AND 2 VERIFY NECESSITY OF DOUBLE TRUSSES WITH TRUSS MFR. DUE TO POINT LOADING AND 14 PREFERRED LOCATION OF SATELLITE DISH SLED. SEE SCOPE OF WORK.
EN 10d @ 6" O.C. - THE LOCAL JURISDICTION. H. THE POSITIONS, WEIGHTS, AND METHODS OF ATTACHMENT OF ALL MECHANICAL UNITS, ADDITIONAL UNIFORM LOADING, TYPICAL.
ELECT FIXTURES, PLUMBING, ETC. SHALL BE INCLUDED IN THE DESIGN OF THE TRUSSES 15 19/32" PLYWOOD ROOF DECK. SEE NAILING SCHEDULE, THIS SHEET.
FN 10d @ 12" O.C. - B. ALL MECHANICAL SUPPLY AND RETURN OPENINGS SHALL BE BETWEEN FRAMING U.O.N. BY THE TRUSS MFR. 3 COORDINATE BLOCKING WITH EXHAUST AND SUPPLY DUCT.
16 2x6 CEILING JOISTS @ 16" O.C. @ 7'-0" A.F.F. SEE 1/A6.4.
MANUFACTURED ROOF TRUSS NOTES: I. DESIGN ROOF TRUSSES TO SUPPORT ALL IMPOSED LOADS, INCLUDING WIND & LATERAL 4 CONT 2x4 WD BRIDGING ON TOP OF BOTTOM CHORD. ADJUST AS REQUIRED FOR DUCT
A. MFR'D ROOF TRUSSES ARE AT 2'-8" O.C. U.O.N. LOADS. COORDINATE SIZE, LOCATION AND WEIGHT OF EQUIPMENT WITH MECHANICAL PLENUMS, MAX SPACING AT 5'-0" O.C. OR TIGHTER SPACING AS REQUIRED BY TRUSS 17 INTERIOR SHEAR WALL BELOW. ALIGN DINING SIDE OF WALL WITH SIDE OF
ROOF SHEATHING 5/8" CDX PLYWOOD (40/20), PS1 RATING - WORK. PROVIDE MULTIPLE TRUSSES WHERE ONE TRUSS CANNOT SUPPORT THE LOAD. DESIGN. SEE 16/S4.1 FOR BRIDGING LAP DETAIL. TRUSS. SEE DTL. 11/S4.1.
NOTE:
B. "T-#" DENOTES ROOF TRUSS TYPE. REFER TO SCHEDULE 11/S4.2. PROVIDE BRIDGING BETWEEN TRUSSES AS SPECIFIED AS MINIMUM STANDARD.
5 SIMPSON MSTA 24 AT CORNER DBL TOP PLATE. CENTER STRAP ON CORNER. 18 DRAG TRUSS AT INTERIOR SHEAR WALL. PROVIDE DOUBLE TRUSS AS
LIVE MAS
REQUIRED. DESIGN DRAG TRUSS FOR 365 PLF ALONG TOP CHORD OF MEDIUM54
C. TRUSS DWGS ARE PROVIDED FOR CONCEPTUAL DESIGN ONLY. MFR SHALL SUBMIT J. INSTALLATION OF ALL TRUSSES SHALL BE DONE USING A SPREADER BAR WITH A THREE
SEE 13/S4.2 FOR DEFINITIONS. SHOP DWGS AND CALCS, BOTH SIGNED BY A LICENSED STRUCTURAL ENGINEER (STATE POINT VERTICAL PICK. CARE SHALL BE USED IN LIFTING TO PREVENT HORIZONTAL 6 (2) 2x6 BLOCKING W/ U26-2 HANGERS. TYP. EDGES OF ALL ROOF TOP EQUIPMENT AND TRUSS (10,000 LBS TOTAL). ATTACH ROOF SHEATHING TO DRAG TRUSS
OF (PROJECT)). SUBMIT SHOP DWGS AND CALCS TO THE ARCHITECT AND ENGINEER BENDING. ALL ROOF OPENINGS - SEE DET. 10 & 15/S4.2. WITH 10d NAILS @ 4" O.C. ALONG ENTIRE LENGTH OF TRUSS.
FOR REVIEW AND SUBMITTAL AND , IF REQUIRED, TO BLDG OFFICIAL FOR APPROVAL
PRIOR TO FABRICATION. SHOP DWGS SHALL INCLUDE LAYOUT PLAN AND K. IMPROPER HANDLING OF THE TRUSSES AS NOTED ABOVE AND IN THE SPECS SHALL 7 LOC. OF HOOD. SEE HOOD DRAWINGS FOR HOOD ATTACHMENT DETAIL 9/S4.1. 19 FRAMING FOR TRANE RTU SHOWN. COORDINATE WITH TRUSS
CONNECTORS. CALCS SHALL BE BASED ON THE SPECIFIED LOADING CONDITIONS MEAN REMOVAL OF THE TRUSSES FROM THE JOBSITE AND REPLACEMENT AT MANUFACTURER IF ALTERNATE YORK RTU OPTION IS CHOSEN.
SHOWN HEREIN. MFR SHALL PROVIDE HANGERS AND CONNECTIONS BETWEEN CONTRACTOR'S EXPENSE. 8 2X6 LEDGER REF. 5/S4.1.
20 2X6 @ 2'-0" O.C. WITH SIMPSON U-26 EA. END.
ROOF FRAMING
TRUSSES. REVIEW AND APPROVE DIMENSIONS, SHAPES AND DETAILS SHOWN ON SHOP
9 DIMENSION IS FROM INSIDE FACE OF WALL FRAMING.
DWGS PRIOR TO SUBMITTAL TO THE ARCHITECT / ENGINEER FOR REVIEW AND
COMMENT.
L. SEE DIV. 6 OF THE SPECS FOR DETAILS ON TRUSS MANUFACTURING AND NAILING.
21 PORTION OF PARAPET IS ABOVE ROOF OF WALK-IN COOLER. SEE
G
PLAN
10 HVAC ROOF OPENING FOR DUCT. VERIFY SIZE WITH HVAC MFR. & MECHANICAL DWGS. ELEVATION FOR DETAILS.
D. TRUSS MFR SHALL PROVIDE HANGERS AND CONNECTORS ADEQUATE FOR LOADS.
S3.0
ROOF CONNECTORS ARE BASED UPON SIMPSON "STRONG TIE" OR APPROVED EQUAL. 11 (2)2x6 BUILT-UP COLUMN AT TRUSS BEARING, TYP. @ GIRDER. TRUSS ONLY. REF. DETAIL
19/S4.2.
E. TRUSS CHORDS AND PARAPET VERTICALS SHALL BE 2x6 MIN AND CONSISTENTLY SIZED
THROUGHOUT PROJECT. 12 NOT USED
PLOT DATE:
NAILING SCHEDULE - ROOF D ROOF FRAMING NOTES C KEY NOTES B
H
SEE WALL SCHEDULE ON
SHEET S2.0 FOR ANCHOR
BOLT REQUIREMENTS, TYP.
(2) #5 CONT. SEE WALL SCHEDULE ON
#5 CONT. SHEET S2.0 FOR ANCHOR
612" BOLT REQUIREMENTS
4" CONC. SLAB W/ WWF
SILL GASKET 6x6-W1.4x1.4
6" HIGH x 1'-1" WIDE TYP.
CONCRETE CURB
#3 @ 18" O.C. DOWEL
SILL GASKET 612"
4" CONC. SLAB W/ WWF
TYP.
4" CONC. SLAB W/ WWF
6"
TYP.
6x6-W1.4x1.4 6x6-W1.4x1.4
6"
4"
TYP.
#3 @ 18" O.C. DOWEL
6"
8" MIN.
4"
2'-0"
#3 @ 18" O.C. DOWEL
1'-0" MIN.
(2) #5 CONT.
REPORT
OR PER
SOILS
TOP & BOTTOM (4) #5 CONT. BARS (2) #5 CONT. BARS
TOP & BTM. TOP & BTM.
(2)-#5 @ 12" O.C.
6" HOOK 6" 1'-6"
1'-6" 3" COVER MIN., TYP.
6" HOOK
YSW190
1'-6"
D
NOT USED NTS 17 NOT USED NTS 13 INTERIOR FOOTING AT COOLER 3/4" = 1'-0" 9 FURRED WALL 3/4" = 1'-0" 5 FOOTING @ SIDE & REAR WALLS 3/4" = 1'-0" 1
H D
2x6 AT 16" O.C.
SEE WALL SCHEDULE ON
SEE WALL SCHEDULE ON SHEET S2.0 FOR ANCHOR
SHEET S2.0 FOR ANCHOR 6 1/2" AT SIDE, REAR & INT. SHEAR WALLS BOLT REQUIREMENTS, TYP.
#5 CONT. BOLT REQUIREMENTS 7" AT FRONT WALLS (2) #5 CONT.
TYP. ANCHOR ROD AT
SILL GASKET 1
6 2" HOLDOWN LOCATIONS.
4" CONC. SLAB W/ WWF SEE SCHEDULE FOR SIZE
(6) #3 @ 3" o.c. CENTERED
6" HIGH x 1'-1" WIDE
6x6-W1.4x1.4
ON HOLDOWN CONCRETE CURB
4" CONC. SLAB W/ WWF
TYP.
6"
6"
TYP.
6x6-W1.4x1.4
6"
8" MIN.
4"
4"
#3 @ 18" O.C. DOWEL
EMBED.
1'-2"
CONSULTANT'S
#3 @ 18" O.C. DOWEL SEAL
2'-0"
(2) #5 CONT. HOLDOWN ANCHOR ROD
TOP & BOTTOM HTT5 (4) #5 CONT. BARS
HDU5 PROVIDE CAST IN PLACE TOP & BTM.
HHDQ14 HEADED ANCHOR ROD OR
(2)-#5 @ 12" O.C.
6" HOOK HD19 POST INSTALLED THREADED 1'-412" 1'-6"
1'-6" ANCHOR ROD WITH HILTI
NOTE:
YSW190
HY200 SAFE SET SYSTEM
SEE DETAIL 1/S4.0 & 13/S4.0
FOR ADDITIONAL INFORMATION
NOT USED NTS 18 NOT USED NTS 14 FOOTING AT COOLER 3/4" = 1'-0" 10 HOLDDOWN DETAIL N.T.S. 6 FOOTING @ FRONT TOWER LEG 3/4" = 1'-0" 2
SEE WALL SCHEDULE ON
D MISC.CHANGES 10.25.13
SHEET S2.0 FOR ANCHOR
BOLT REQUIREMENTS G PROTOTYPE UPDATES 1.17.14
TYP. STEM WALL BEYOND
H PROTOTYPE UPDATES 3.10.14
SILL GASKET 7" 4" CONC. SLAB W/ WWF
4" CONC. SLAB W/ WWF COLD JOINT 6x6-W1.4x1.4
6x6-W1.4x1.4
#5x1'-0"@12" O.C.
TYP.
SMOOTH DOWEL
6"
TYP.
#3 @ 18" O.C. DOWEL
6"
8" MIN.
4"
4"
SOILS REPORT
1'-0" MIN.
OR PER
(2) #5 CONT. BARS
1'-0" MIN.
REPORT
OR PER
TOP & BTM.
SOILS
(2) #5 CONT. BARS
TOP & BTM.
CONTRACT DATE: XX.XX.XX
3" COVER MIN., TYP. BUILDING TYPE: LIVE MAS MEDIUM54
3" COVER MIN., TYP.
6" HOOK 1'-6" PLAN VERSION: March 2013
YSW140
1'-6"
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
NOT USED N.T.S. 19 NOT USED N.T.S. 15 NOT USED N.T.S. 11 FOOTING @ FRONT WALL N.T.S. 7 FOOTING @ FULL HEIGHT OPENING 3/4" = 1'-0" 3
TACO BELL
ANCHOR BOLTS PER
SHEAR WALL SCHEDULE. 612" 123 MAIN STREET
EMBED. 7" INTO CONC. ANYTOWN, USA 98765
612"
SILL GASKET
WWF OR FIBERMESH
SEE WALL SCHEDULE ON
#3 @ 18" O.C. DOWEL
D SHEET S2.0 FOR ANCHOR
4" CONC. SLAB PER BOLT REQUIREMENTS
#6x7'-0" @ 12" O.C.
PLAN
6"
TYP. # 5 CONT.
4" CONC. SLAB W/ WWF
6x6-W1.4x1.4
LIVE MAS
MEDIUM54
#3 @ 18" O.C.
DOWEL
8" MIN.
4"
3'-6"
6" HOOK D
STRUCTURAL
1'-0" MIN.
6" HOOK
REPORT
OR PER
SOILS
(6)-#6 CONT. TOP & D
BOTTOM, 3" MIN. CLEAR
FROM EDGE
(2) #5 CONT. BARS
TOP & BTM.
DETAILS
#6 @ 12" O.C.
FOUNDATION
CONCRETE CURB @
DRIVE-THRU LANE. 1'-6"
S4.0
YSW188
D COORDINATE WITH
5'-0"
CIVIL - 10" MIN. WIDTH
PLOT DATE:
NOT USED N.T.S. 20 NOT USED N.T.S. 16 NOT USED NTS 12 FOOTING @ INTERIOR SHEARWALL 3/4" = 1'-0" 8 FOOTING @ DRIVE THRU 3/4" = 1'-0" 4
EL. +20'-9"
2x8 VERT. LAPPED TOP OF WOOD FRAMING
2x6 VERT. BLOCKING 24" O/C. W/ (2) 16d TO SIDE OF TRUSS H3 HORIZ @ EA. STUD
EA. END, EA. SIDE
(4) 10d NAILS INTO TOP 2-2x6 TOP PLATE
2x6 BLOCKING TYP.
1" CLR.
ROOF TRUSSES, TYP. AND BOTTOM CHORD
B.N.
T.O. DBL PLATE A35, TYP. PLYWOOD
SEE PLAN DBL 2x TOP PLATE
REF. DETAIL 8/S4.4 NUTS
T.O. LEDGER
(SEE SPLICE
SIMPSON DTC ROOF TRUSS VARIES
DETAIL 1/S4.3) (2) 10d NAILS INTO
CLIP ON BOTH SIDES (FIELD VERIFY)
CROSSING WEB MEMBER
2x6 PARAPET SECOND TRUSS BAY, 16d @ 6" O.C. TYP.
TYP. SIM.
PLYWOOD ROOF 2x6 AT 16" O.C.
5 7
FASTENER WITH (2) - 8" WASHERS W/ 5
DECK - ELEV. VARIES
S4.1 CL MIN 112" EMBED AT 32" O.C. E.N. S4.3 SECOND TRUSS BAY,
(6) 16d TYP.
2x6 BLOCKING 3" FENDER (2) 2x6 W/ SIMPSON LUS26-2 TYP.
10d @ 6" O.C. PLYWOOD ROOF
SILL PLATE WASHERS HANGER, EA. END @ 32" O.C. 5
2x6 BLOCKING DECK - ELEV. VARIES
@ 48" O.C., U.N.O. S4.1 CL
ALL-THREAD HANGING ROD (6) 16d
(REF. ARCH. OR EQUIPMENT 2x6 LEDGER 10d @ 6" O.C.
2x6 BLKG
MANUFACTURED FOR 2x6 BLOCKING
RECOMMENDED DIAMETER) @ 48" O.C., U.N.O.
E.N.
CL
U-26 HANGER EA. E.N.
END OF BLOCKING
SUPPORT- PARALLEL TO TRUSS 1/2" = 1'-0" 13 HANGING BULKHD. OR HOOD DETL. N.T.S. 9 LEDGER DETAIL 3" = 1'-0" 5 CL
PLYWD
(2) 2x6 CONT.
U-26 HANGER EA.
SIDE
ONE
TOP PLATE
2x6 @ 4'-0" O.C. 10'-8" 2x6 CRIPPLE STUDS END OF BLOCKING
6 T.O. DBL. PL. @ 16" O.C.
2x4 BRIDGING PER
PLYWD BOTH SIDES AT
S4.1 (3) 16d NAILS SHEATHING
FRONT & REAR WALLS
TRUSS DESIGN
16 2x6 @ 4'-0" O.C.
1" CLR.
HEADER REF. S2.0 16d NAILING THRU STUD
S4.1 VARIES 6
E.N. 2x4 BRIDGING PER
HEADER BRG. S4.1
ROOF TRUSSES, TYP. SIMPSON LCE4 IN PAIRS 2x6 STUD TRUSS DESIGN
TYP. EA. @ LINTEL LOC. 16
10'-8" 10'-8" S4.1
T.O. DBL PLATE TRUSS BRG 2x6 STUDS AT 16" O.C. BRIDGING PER TRUSS
SIMPSON DTC ROOF TRUSS DESIGN
TRUSS CL TRUSS CL 2x6 WD. TRIMMERS U.O.N.
CLIP ON BOTH SIDES
(6) 16d 10'-8"
SIMPSON A35 CLIP
REFER TO SHEET S1.0
FOR REQUIRED NUMBER T.O.
(BEYOND) FROM STUD (2) 2x6 DBL PLATE DBL. TRUSS CL TRUSS CL
ADJACENT TO BRACE (SEE SPLICE DETAIL 15/S4.1) OF KING STUDS
PLATE CONSULTANT'S
TO DBL PLATE 7 (6) 16d
FASTENER WITH (2) - 8" WASHERS W/
MIN 112" EMBED AT 32" O.C. CONNECT BUILT-UP STUDS E.N. SEAL
W/ 16d @ 8" O.C. (2) 2x6 DBL PLATE
VARIES (SEE SPLICE DETAIL 15/S4.1)
HEADER PER PLAN SILL PLATE SILL PLATE WITH ANCHOR
HEADER BRG BOLTS PER PLAN AND BEAM REF. PLAN
REFER TO ARCH 2x6 SHEAR WALL SCHEDULE
DWGS
HOLDOWN ANCHOR
SIMPSON A35 CLIP
AT SHEARWALLS ONLY
(BEYOND) FROM STUD
CONC. FOUND. WALL ADJACENT TO BRACE
TO DBL PLATE
REAR WALL N.T.S. 18 SUPPORT PERP. TO TRUSS 1/2" = 1'-0" 14 FRAMING ELEVATION @ OPENING 3/8"=1'-0" 10 BRIDGING DETAIL 3" = 1'-0" 6 FRONT WALL N.T.S. 2
D 2x6 BLOCKING @ 48" O.C.
10d @ 6" O.C. w/ U26 HANGER EACH END.
TO BLKG. ALIGN w/ BRACE
10d @ 4" O.C. FULL
6" 6" LENGTH OF TRUSS
TYP. D MISC.CHANGES 10.25.13
DRAG STRUT. ALIGN SIDE
OF TRUSS w/ DINING 2x4 BRACE @ 48" O.C.
SIDE OF SHEAR WALL w/ (4) 10d TO BLKG.
DBL 2x TOP PLATE
H3 @ EACH BRACE TO T.O. DBL PLATE REF. DETAIL 1/S4.4
LTP5 @ 12" O.C. DOUBLE TOP PLATE 2x6 BLOCKING AT CLG SEE PLAN (SEE SPLICE DETAIL
FROM SIDE OF 1/S4.3)
6'-0" TRUSS TO SIDE OF CEILING. REFER TO ARCH DWGS
STAGGER OF SPLICES DOUBLE TOP PLATE
VARIES PLYWOOD
(2) 16d NAILS PER 6" VARIES
A35 ANGLE @ 12" O.C. BLOCKING
EDGE NAILING CEILING
FROM TRUSS TO DOUBLE
TOP PLATE
2X6 CONT. DOUBLE TOP 5
TRUSS W/ PARAPET, CONTRACT DATE: XX.XX.XX
2x6 STUDS @ 16" O.C. PLATE - NO SPLICES S4.1 2'-8" O.C.
B.N. BUILDING TYPE: LIVE MAS MEDIUM54
PLYWOOD
PLAN VERSION: March 2013
E.N.
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
NOT USED N.T.S. 19 PLATE LAP DETAIL 1"=1'-0" 15 INTERIOR SHEAR WALL 1/4" = 1'-0" 11 1/2 WALL HGT
BLOCKING PLYWOOD AT FRONT AND SIMPSON LSTA30 TACO BELL
VARIES
REAR WALLS ONLY @ EA. STUD
123 MAIN STREET
ANYTOWN, USA 98765
A35 TRUSS TO
2x6 BLOCKING PLATE (HORIZ)
ANCHOR BOLTS PER SHEAR
WALL SCHED. - EMBED 7" INTO
TRUSS TRUSS CONC. 10'-8"
EXTERIOR T.O. DBL PLATE
SHEATHING 2x4
SILL PLATE
NAILING PER SCHEDULE
E.N.
PER SCHED.
LIVE MAS
30
SLAB PER PLAN
CONT. 2x6 DBL PLATE
(SEE SPLICE DETAIL 15/S4.1) MEDIUM54
2x4 2x4 E.N.
(3) 16d
2x HEADER W/(2) ROWS
(2) 16d
(2) ROWS OF 16d
NAILS @ 6" O.C.
OF 16d NAILS @ 12" O.C.
EACH MEMBER 2x6 @ 12" O.C. STRUCTURAL
2x4
DETAILS
NOTE: REFER TO TRUSS ELEVATION 3/S4.2. NOTE: REFER TO TRUSS ELEVATION 3/S4.2. FRAMING
1/2" PLYWOOD SHEATHING W/(2)
ROWS OF 8d NAILS @ 6" O.C.
S4.1
PLOT DATE:
TYP. MULTIPLE HEADER 1-1/2" = 1'-0" 20 BRIDGING LAP DETAIL N.T.S. 16 BRIDGING LAP DETAIL @ OPEN CLG. N.T.S. 12 TYPICAL WALL BELOW TRUSS 3/4" = 1'-0" 8 SIDE WALL @ TRUSS N.T.S. 4
BOUNDARY NAIL (B.N.) EQUIPMENT DESIGN WEIGHT
FOR BLDG. PERIMETER PRE-ENG. TRUSSES @ 2'-8" O.C.
CONNECTION TYPE: NAILING: HVAC UNIT - RTU-1
* 1700 lbs.
2x6 BETWEEN 2 - 2x6 TOP PLATE
1. JOIST TO SILL OR GIRDER, TOENAIL (3-8d)
SOLID BLOCKING
HVAC UNIT - RTU-2
* 2800 lbs.
D
TRUSSES @ 16" O.C.
TRUSS 2x6 PARAPET EXTENSION @
2. BRIDGING TO JOIST, TOENAIL EACH END (2-8d)
BETWEEN EACH
TRUSS/SUPPORT @
HVAC UNIT - RTU-1 (ALT)
* 1700 lbs. 1'-4"
2'-8" O.C.
PANEL EDGES SEE
14/S4.2
HVAC UNIT - RTU-2 (ALT)
* 1900 lbs.
3. 1"x6" (25MMx152MM) SUBFLOOR OR LESS TO JOIST, FACE NAIL (2-8d) EXHAUST FAN - EF-1
* 200 lbs.
PLYWOOD
4. WIDER THAN 1" X 6"(25MMx152MM) SUBFLOOR TO JOIST, FACE NAIL (3-8d)
LONG DIMENSION OF
PLYWOOD TO RUN
EXHAUST FAN - EF-2
* 70 lbs.
3'-9"
PERPENDICULAR TO HOOD #1 - TACO BELL 400 lbs.
5. 2" (52MM) SUBFLOOR TO GIRDER, BLIND AND FACE NAIL (2-16d)
JOISTS ICE CONDENSERS 200 lbs. ROOF SHEATHING
6. SOLE PLATE TO JOIST OR BLOCKING, TYPICAL FACE NAIL (16d @16" O.C.) EDGE NAIL (E.N.) @ FREEZER CONDENSER 300 lbs.
PLYWD. PERIMETER
7. SOLE PLATE TO JOIST OR BLOCKING, AT BRACED W. PANELS (3-16d PER 16") COOLER CONDENSER 300 lbs.
ADD 2x6 @ SPLICE 2x6 LEDGER/BLOCKING BETWEEN
8. TOP PLATE TO STUD, END NAIL STAGGER PLYWD. MUZAK DISH, SLED & BALLAST - 1,087 lbs. TRUSSES
(2-16d)
JOINTS
PLYWOOD
ALLOW FOR LOCATION
ANYWHERE ON ROOF.
4'-0"
9. STUD TO SOLE PLATE (2-16d END NAIL)
FIELD NAIL (F.N.) @ ALL
2x6 BLOCKING BETWEEN TRUSS &
10. DOUBLE STUDS, FACE NAIL (16d @ 24", O.C.) INTERMEDIATE
MEMBERS * A. ALL DESIGN WEIGHTS INCLUDE CURB.
B. COORDINATE WEIGHTS WITH HVAC UNIT SCHEDULE 1/M1.0. INTERMEDIATE STUDS
11. DOUBLE TOP PLATES, TYPICAL FACE NAIL (16d @ 16" O.C.) NOTES:
1. MIN. PLYWD. SHT. SIZE SHALL BE 2'-0" X 4'-0".
12. DOUBLE TOP PLATES, LAP SPLICE (8-16d) 2. MIN. 3/8" NAILING EDGE DISTANCE.
3. EDGE NAIL (E.N.) O/ BEAMS AND AROUND ALL OPENINGS.
13. BLOCKING BETWEEN JOISTS OR RAFTERS TO TOP PLATE, TOENAIL (3-8d) ADD 2x6 @ SPLICE ADD 2x6 @ SPLICE
PLYWOOD
14. RIM JOIST TO TOP PLATE, TOENAIL (8d @ 6" O.C.)
ROOF NAILING PLAN N.T.S. 13 ROOF TOP EQUIPMENT WEIGHTS N.T.S. 9
4'-0"
15. TOP PLATES, LAPS AND INTERSECTIONS, FACE NAIL (2-16D) 2 - 2x6 PLATE
16. CONTINUOUS HEADER, TWO PIECES (16d @ 16" O.C. ALONG EDGE) D
17. CEILING JOISTS TO PLATE, TOENAIL (3-8d)
PLYWOOD ROOF HUCQ610 HANGER 19 2x6 TOP AND 2x6 UNDER TRUSSES AND
18. CONTINUOUS HEADER TO STUD, TOENAIL (4-8d) PLYWOOD SHEATHING
DECK SHEATHING AT (3) 2x6 POST BOTTOM (TYP.) BETWEEN @ 16" O.C. (TYP.)
HEADER PER S4.2
19. CEILING JOISTS, LAP OVER PARTITIONS, FACE NAIL (3-16d) PLAN (TYP.) 20
20. CEILING JOISTS TO PARALLEL RAFTERS, FACE NAIL (3-16d) S4.2
1/8" GAP
21. RAFTER TO PLATE, TOENAIL (3-8d)
(2) 2X6 BLOCKING
22. 1" (25MM) BRACE TO EACH STUD AND PLATE, FACE NAIL (2-8d)
(3) 2x6 (TYP.)
23. 1"x8" SHEATHING OR LESS TO EACH BEARING, FACE NAIL (2-8d) SIMPSON U26-2 @ DBL. 2X6
(3-8d)
CONSULTANT'S
24. WIDER THAN 1"x8" SHEATHING TO EACH BEARING, FACE NAIL
COMMON TRUSS (2) 2x6 PLATE SEAL
25. BUILT-UP CORNER STUDS (16d @ 24" O.C.) (2) SIMPSON PSCL PANEL
SHEATHING CLIPS EQUALLY
1'-6"
26. 2" PLANKS (2-16d AT EACH SPLICE) SPACED BETWEEN EACH
TRUSS/SUPPORT
27. 2x6 BOX BEAM / HEADER (12d @ 12" O.C.)
2x6 @ 16" O.C.
28. BUILT-UP GIRDER AND BEAMS (20d @ 32" O.C. AT TOP & BOTTOM AND
STAGGERED 2-20d AT ENDS AND AT EACH SPLICE) CONCRETE CURB
NAILING SCHEDULE N.T.S. 18 PLYWOOD EDGE BLOCKING N.T.S. 14 ROOF OPENING DETAIL N.T.S. 10 WALL FRAMING DETAIL 3/8" = 1'-0" 2
(1)2X6 W/ 16d NAILS 27'-4"
@ 8"O.C. STAGGERED
(3)2X6 COLUMN
W/ 30d NAILS PLYWOOD SHEATHING T.O. TRUSS
TRUSS SINGLE DOUBLE BEARING
COMMENTS SEE S3.0
JOIST,RAFTERS OR TYPES TRUSS TRUSS POINT
TRUSS U.N.O. DESIGNATION DESIGNATION
30d COMMON 30d COMMON 30d COMMON SEE NOTE 1. D MISC.CHANGES 10.25.13
T1 - T28 X XX
NAILS NAILS NAILS
312"
312"
312"
MIN. 16" SQUARE
JOIST HANGERS - NOTES: MIN. 16" DIAMETER CLEARANCE CLEARANCE AREA
8"
8"
8"
SEE NOTE BELOW AREA REQUIRED FOR HVAC DUCT REQUIRED FOR HVAC
OPENING & INSULATION. 12
1. HOLDOWN CONNECTORS SHALL BE SPECIFIED BY SITE SPECIFIC ARCHITECT/ DUCT & INSULATION.
PER PLANS 3
8"
ENGINEER BASED UPON LOADING DATA PROVIDED BY TRUSS DESIGNER.
8"
8"
8"
2. PROVIDE SHOP DRAWINGS PRIOR TO FABRICATION.
2'-6" MIN.
8"
8"
8"
PLWD. EDGE 3. TRUSS MEMBER SIZES ARE FOR REFERENCE ONLY. ACTUAL SIZE SHALL BE
NAILING (E.N.) DETERMINED BY TRUSS MANUFACTURER BASED ON ACTUAL LOAD CONDITIONS
DOUBLE 2x HEADER AND CODES.
AROUND TRUSS BEARING
SAME SIZE AS JOIST
OPENING
8"
8"
8"
OR RAFTER U.N.O. EL. 10'-8"
NOTE: CONT 2X4 LATERAL BRACING. CONTRACT DATE: XX.XX.XX
HANGERS SHALL BE "SIMPSON" STANDARD "U" @ ROOF. SEE SHT. S3.0
EQUAL SPACES, TYP. BUILDING TYPE: LIVE MAS MEDIUM54
DBL. JOIST OR RAFTERS SHALL BE JOINED TOGETHER AS
FOLLOWS: PLAN VERSION: March 2013
112" 112" 112" 112" 112" 112" 2x6 MIN.
1. 10" OR LESS NOM. DEPTH - 16d @ 12" O.C. STAGGERED
2. MORE THAN 10" - (2)16d @ 12" O.C. NOTE: ALL WEBS MUST ALIGN SITE NUMBER: XXX-XXX
(3) 2X6 COLUMN (4) 2X6 COLUMN (3) 2X4 COLUMN BETWEEN TRUSSES 2x4 MIN.
STORE NUMBER: XXXXX
BUILT-UP 2X COLUMNS N.T.S. 19 TYPICAL ROOF OPENING 1"=1'-0" 15 TRUSS SCHEDULE N.T.S. 11 TRUSS ELEVATION 1/4" = 1'-0" 3
TACO BELL
123 MAIN STREET
WIND WARD 18.5 PSF WINDWARD 18.5 PSF WINDWARD LEEWARD
PARAPET 12.3 PSF LEEWARD 12.3 PSF LEEWARD PARAPET ANYTOWN, USA 98765
GYP. BOARD OR PLYWOOD GYP. BOARD OR PLYWOOD GYP. BOARD OR PLYWOOD
20 PSF
1/2" INTERIOR PLYWOOD SHEATHING 1/2" INTERIOR PLYWOOD SHEATHING GYP. BOARD OR PLYWOOD 1/2" INTERIOR PLYWOOD SHEATHING
- @ SHEAR WALLS ONLY - @ SHEAR WALLS ONLY PLYWOOD SHEATHING - SEE - @ SHEAR WALLS ONLY
WALL SCHEDULE FOR TYPE LIVE LOAD
INTERIOR PLYWOOD SHEATHING AND NAILING
SHEATHING - SEE WALL SCHEDULE
FOR NAILING TYPE
SHEATHING - SEE WALL SCHEDULE
FOR NAILING TYPE
PER SHEAR WALL SCHEDULE
D
SHEATHING - SEE WALL SCHEDULE
FOR NAILING TYPE
D
10 PSF
LIVE MAS
D ANCHOR ROD TYP. REF. MEDIUM54
D D SIMPSON HOLDOWN PER S1.0
ANCHOR ROD TYP. DEAD LOAD
SIMPSON HOLDOWN PER S1.0 6/S4.0 SIMPSON HOLDOWN PER S1.0
REF. 6/S4.0 ANCHOR ROD TYP.
W/ 3-2x6 POST. (APPLY TO TOP CHORD)
ANCHOR ROD TYP. SIMPSON HOLDOWN PER S1.0 REF. 6/S4.0
10 PSF
REF. 6/S4.0 6x6 POST
DEAD LOAD
STRUCTURAL
COUNTERSINK STUD WALL PLYWOOD E.N. COUNTERSINK STUD
(APPLY TO BOTTOM CHORD)
DETAILS
NOTE:
2 TRIMMER STUDS
(2) 2X6 KING STUDS
D TRIMMER STUD
ALSO, APPLY ROOF TOP AND SUSPENDED POINT LOADS. WEIGHT ROOF
AND LOCATION OF UNITS AS NOTED ARE SHOWN ON THIS SHEET
REF. PLAN FOR LOCS. SIMPSON HOLDOWN (1) KING STUD REF. PLAN FOR LOCS. AND ARE NOT INCLUDED IN THE ABOVE LOADING DIAGRAM.
FACE OF ROUGH OPENING PER S1.0 W/ 2-2x6 FACE OF ROUGH OPENING VERIFY THESE LOADS WITH MECHANICAL SUPPLIER BEFORE
A B POST. WALL PLYWOOD E.N. C D DESIGNING TRUSS. REFER TO 2/S4.2 FOR SNOW DRIFT LOADING.
S4.2
PLOT DATE:
HOLDOWN DETAILS 1 1/2"=1'-0" 8 TRUSS DESIGN CRITERIA N.T.S. 4
1/2" PLYWOOD WITH BLOCKING
TO PROVIDE 1/2" MIN. SLOPE. 2X8 P.T. CONT.
LOG TO NG -
E.I.F.S. TOP PLATE
SIMPSON A35 EA.
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
END
REVIEWED AND ADAPTED BY A LICENSED
SLOPE
SIMPSON A34
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
FRAMING ANCHOR
VARIES
O
BOLTS (SEE (TOTAL OF 4)
R ELEMENTS
SCOPE OF SEE PLAN
T'S PRIOR
3 - 2x10 BLOCKING (3)2X10 BLOCKING
WORK)
R PSITE-SPECIFIC
FOR CANOPY
ATTACHMENT, TYP.
REGIONAL ARCHITECTURAL PARTNER (RAP)
CL
10'-8"
IMAGE
RIO
ANGLE IRON BRACING
KITCHEN OPERATIONS MUST BE APPROVED
TRUSS BRG.
SPAN STUDS AS NEEDED
CONSTRUCTION.
CENTERLINE OF
L
NSTHE
CANOPY 2x6 DBL. TOP PLATE 2X6 P.T. CONT.
ITH MEFOR
U
ATTACHMENT TOP PLATE
CANOPY (SEE
MODIFICATIONS THAT CHANGE
SCOPE OF WORK) REF. ARCH FOR EIFS
JURISDICTIONAL REQUIREMENTS
(2) - 2x6 STUDS BASE AND FINISH
O
CE WENGINEER
EACH SIDE OF
I
C
BLOCKING W/
PIPE/SLEEVE 2- 12d NAILS INTO
THITEMPLATE
SEE 17/A6.3 EACH OF THE 2x10
MUST BEIS
(TYP.) BLOCKING MEMBERS
D
ARCHITECT AND/OR
DOCUMENT
S
NOT USED 17 TIE-ROD BLOCKING 3" = 1'-0" 13 DRIVE THRU CANOPY BLOCKING 1-1/2" = 1'-0" 9 TYPICAL PARAPET CAP N.T.S. 1
DRAWINGSPLA
THESE
R E
REM
1/2" PLYWOOD
(2) 2x6 DBL PLATE
22'-1"
PARAPET CAP REFER (SEE SPLICE
B.N. TYP. T.O. DBL PLATE
TO DETAIL 8/S4.4 DETAIL 15/S4.1)
2x6 @ 16" O.C. CONSULTANT'S
18'-10" SEAL
T.O. DBL PLATE
E.N. E.N.
1/2" PLYWD SHEATHING
NOT USED 18
(4) 16d (TYP.)
2x6 STUDS FRONT WALL
(3) 2x6 FULL HEIGHT
@ EACH CORNER D MISC.CHANGES 10.25.13
MTL. HINGED
LINE OF EIFS. SEE SHEET 2X4 @ EACH STUD LOUVER- SEE ARCH.
A4.0 & A4.1 TO STUD DET. 3/A6.0
1'-4 1/2" 1'-3" 7" 2x6 BLOCKING
13 SIM.
S4.3 PLYWOOD ROOF
DECK - ELEV. VARIES
D
ROOF DECK
STOREFRONT PER
CONTRACT DATE: XX.XX.XX
ARCH'L TYP.
BUILDING TYPE: LIVE MAS MEDIUM54
5
HOLDDOWN PER 2x6 @ 16" O.C. PLAN VERSION: March 2013
E.N. S4.1
SHEARWALL SCHEDULE
SITE NUMBER: XXX-XXX
20 STORE NUMBER: XXXXX
SIMPSON HTT5,
S4.3
5'-6"
NAILING PER
SCHEDULE TACO BELL
13 123 MAIN STREET
SIM.
S4.3 ANYTOWN, USA 98765
1/2" PLYWOOD 10'-8"
T.O. DBL PLATE
2x6, TYP. @ 16"
O.C.
10'-8"
TRUSS BRG. (2) 2x6 DBL PLATE
2X4 @ 16" O.C.
HOLDDOWN PER
SHEARWALL SCHEDULE 2x6 DBL. TOP PLATE
LIVE MAS
MEDIUM54
D
STRUCTURAL
7"
LINTEL REF. S2.0
FOR SIZE
DETAILS
TACO BELL
E.N.
SIMPSON HTT5,
TOWER
S4.3
PLOT DATE:
FRONT TOWER FRAMING 1/2" = 1'-0" 20 TACO BELL DRIVE-THRU TOWER 1"=1'-0" 12 FRONT TOWER SECTION 1"=1'-0" 4
D
COORDINATE BLOCKING
REQUIREMENTS WITH
2 TYP.
SIGN VENDOR
14'-1"
216.3 sq ft
10'-0"
9'-3"
RIGHT SIDE ELEVATION 1/4" = 1'-0" A
CONSULTANT'S
SEAL
1 1
14'-4"
18.4 sq ft
10'-9"
146.7 sq ft
10'-0"
9'-3"
D MISC.CHANGES 10.25.13
G PROTOTYPE UPDATES 1.30.14
LEFT SIDE ELEVATION 1/4" = 1'-0" B
D D
1 SOLID BLOCKING FOR FASTENERS AS REQUIRED FOR SIGN MOUNTING.
CONTRACT DATE: XX.XX.XX
2 BLOCKING FOR SLAT WALL ATTACHMENT. SEE DETAIL 5/S4.3
BUILDING TYPE: LIVE MAS MEDIUM54
3 PROVIDE BLOCKING FOR CANOPY. SEE DETAIL 13/S4.3
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
1
TACO BELL
123 MAIN STREET
ANYTOWN, USA 98765
KEY NOTES C
D LIVE MAS
14'-10"
MEDIUM54
1. EXTEND BLOCKING AS REQUIRED TO FIT BETWEEN STUDS.
152.1 sq ft 2. ELEVATION AT BOTTOM OF CANOPIES SHALL BE 9'-0" A.F.F. (U.N.O.).
CANOPY/
3. COORDINATE SIGNAGE ELEMENTS and BLOCKING REQUIREMENTS WITH SIGNAGE
VENDOR; SEE SCOPE OF WORK. AWNING
4. THIS SHEET IS TO INDICATE BLOCKING REQUIREMENTS FOR AWNINGS & CANOPIES. BLOCKING
ADDITIONAL BLOCKING IS REQUIRED FOR OTHER ITEMS AS SHOWN ON OTHER
DRAWINGS. ELEVATIONS
S5.0
5. FOR CUPOLA ATTACHMENTS, SEE SHEET S3.0.
PLOT DATE:
FRONT ELEVATION 1/4" = 1'-0" F REAR ELEVATION 1/4" = 1'-0" E GENERAL NOTES D
A D A B F
A5.0 A5.0 A5.1 A5.1
G G
72'-912" STUD TO STUD SIM.
8'-0"
9'-412" 2'-1" 9'-412"
1'-412" 412" 412"
1'-10" 4'-6" 4'-6" 4'-6" 4'-6" 412" 10'-7" 4'-0"
3
D
8 1'-3" 7" 7'-412" (2" EIFS) 8'-0" (2" EIFS) 3 10'-9" 8'-0" (2" EIFS) 3'-6"
6" 3 6" 3 6"
A6.4 R.O.
5"
5"
5"
3 3 3 3 D.S. TYP. 4 D.S. D.S. G
E
DRIVE-THRU
14 13
3'-012"
3'-2"
16 16 16 16 18 4'-7"
8
5'-6"
2 1 HOOD 6'-7" 7'-814" D
C 15
6'-2" A8.3 4 A5.2
A5.2 8 FACE OF FINISH G 20
8'-612"
TB COOK
2x6
8'-3"
A6.4 4 A8.2 3 10 A8.2 A8.3 4
16 OFFICE
2
7"
PREP 12
29'-412" 10'-3" 23'-212" 5 11
10 21
1'-5"
7'-112"
14'-5"
FREEZER
7'-1"
7
5'-8"
HOLD 2x6 2x6 2x6
1 MINI-DUAL LINE KITCHEN
2 10 A8.2 22 D
12" MIN.
10'-514"
3 A8.3
A8.2 10
27'-8" STUD TO STUD
412"
35'-112" 9'-1112" 5 9'-812" 15'-812"
CLEAR
3'-0"
16 512"
54" F.O.W.
27'-10"
10
HOLD
4'-7"
2
26'-5"
20'-7"
10
6'-4"
2
19'-1"
2'-912"
3 A8.0 1 DINING CUSTOMER
5
CONSULTANT'S
SERVING 10 SEAL
5'-1021"
A 9
4 MEN
A5.2
412"
2'-93 4"
5"
A8.0 5 7 A8.2 6 B
A5.2
C
8'-0"
DRY STOR.
1'-9"
WARE COOLER
1'-414" 8
6'-4"
2 WASHING
WOMEN
8'-912"
8'-912"
16
7 UTILITY 19
4'-912" 9'-6" 7'-83 4" 9
4'-412"
A8.0 6
16 16 PASSAGE
3'-10"
2'-6"
7
4 1
1 1 1 1 1
6"
8'-0" (2" EIFS) 2'-8" 2'-212" 6"
6
1 7
A B
17
G
G A8.1 D MISC.CHANGES 10.25.13
2'-6" 4'-0" 4'-0" 4'-0" 4'-0" 4'-0" 6'-612" 26'-3" 3'-10" 10'-5"
R.O. G PROTOTYPE UPDATES 1.30.14
412" 412" 412" 412" 412"
G
71'-11" STUD TO STUD
B C A B C D
A5.0 A5.0 A5.1 A5.1 A5.1 A5.1
SIM.
ROUGH OPENINGS ARE NOT A
NECESSARILY TO STUD. CONTRACT DATE: XX.XX.XX
SEE DETAILS ON SHEET A6.1 BUILDING TYPE: LIVE MAS MEDIUM54
FOR R.O. LOCATIONS. PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
FLOOR PLAN 1/4"=1'-0" A
TACO BELL
DIMENSIONS: 1 STARTING POINT. ALL SUB-TRADES SHALL USE THIS POINT AS A BEGINNING LAY-OUT 15 START OF CHAIR RAIL.
TYPICAL EXTERIOR WALL: INTERIOR SOUND-RATED WALL: A. ALL DIMENSIONS ARE TO FACE OF STUD U.O.N. REFER TO FOUNDATION PLAN FOR FACE (INSIDE FACE OF EXT. WALL STUDS.
OF CONC. DIMENSIONS. 16 CONTINUE CHAIR RAIL AROUND CORNER TO WINDOW JAMB. 123 MAIN STREET
2x6 WD STUDS AT 16" O.C. W/ SHEATHING AS SCHEDULED (SEE TYPICAL INTERIOR WALL W/ 3-1/2" UNFACED
STRUCT. DWGS.) AND R-19 KRAFT-FACED FIBERGLASS BATT B. DIMENSIONS NOTED AS "CLEAR" OR "HOLD" ARE MIN. REQ'D. NET CLEARANCE FROM FACE 2 NO FRP BEHIND W-075 WALK-IN COOLER/FREEZER. ANYTOWN, USA 98765
FIBERGLASS BATT INSULATION.
OF WALL / WAINSCOT FINISH. VERIFY FINAL EQUIPMENT SIZES W/ VENDOR PRIOR TO INT. 17 REMOVEABLE ASTRAGAL FROM INSIDE ONLY.
INSULATION U.O.N. GC SHALL PROVIDE 2 LAYERS OF GRADE 'D' 60 WALL FRAMING. 3 PIPE BOLLARD. SEE DETAIL 8/C1.0.
lb BUILDING PAPER.
HOODWALL: 18 METAL STUDS REQUIRED PER LOCAL CODES.
WINDOWS / DOORS: HOOD WALL, SEE WALL LEGEND.
TYPICAL EXTERIOR WALL WITH 20 GA. S.S. PANEL A. SEE SHT. A1.1 FOR WINDOW TYPES AND DOOR SCHEDULE.
4
TYPICAL INTERIOR WALL : 19 INDICATES WATER HEATER LOCATION. COMES WITH METAL STAND.
BEHIND HOOD. REFER TO DETAIL 2/M3.0 FOR EXTENT B. ALL DOOR AND WINDOW OPENING DIMENSIONS ARE TO ROUGH OPENING.
2x4 WD STUDS AT 16" 0.C. (2x6 OR 2x8 WHERE NOTED.) 5 ELECTRICAL MAIN SWITCH BOARD. REFER TO ELECT. DWGS.
OF S.S. PANEL.
FINISH SUBSTRATES: 20 SPLASHGUARD. SEE DETAIL 9/A6.3. INSTALLATION SHALL BE COORDINATED WITH
A. PROVIDE 1/2" THICK CEMENTITIOUS BD. FROM FLOOR SLAB TO 12" A.F.F. MIN. IN LIEU OF 6 CO2 FILL BOX LOCATION. INSTALLATION OF MOP SINK.
DASHED LINE INDICATES INTERIOR SUBSTRATE
LOCATION.
GYP. BD. AT ALL WALLS EXCEPT SHEARWALL SURFACES, U.O.N.
B. ALL JOINTS, GAPS OR SPACES LEADING TO ALL HOLLOW OR INACCESSIBLE SPACES SHALL
BE SEALED WITH "NSF INTERNATIONAL" APPROVED SEALANTS.
7 TILE TO CONCRETE METAL THRESHOLD. 21 ROOF LADDER. SEE 7/A6.0.
G
LIVE MAS
WALL SUBSTRATES: C. ALL BACK OF HOUSE AND OFFICE WALLS SHALL HAVE 1/2" CDX PLYWOOD SUBSTRATE, 8 KEEP CLEAR FOR UTILITIES & SYRUP LINES. SEE DETAIL 14 & 19/A6.4 FOR STUD 22 ADD SECOND 2X4 WALL ON KITCHEN SIDE. MEDIUM54
- DINING ROOM: U.O.N. LAYOUT REQUIREMENTS.
1/2" GYPSUM WALLBOARD FROM T.O. CURB TO 6" ABOVE CEILING HEIGHT U.O.N. SEE 6, 8 & 16 / A6.3. (NOTE: THE CEMENT BOARD SPECIFICATION IS DESIGNED TO DECOR: 9 MOP SINK. REFER TO SHEET A2.0 & A2.1.
ALLOW THE G.C. FLEXIBLITY. ) A. SEE A2.0 FOR SEATING PLAN AND DETAILS.
- KITCHEN WALLS AND DINING ROOM CLOSET: B. SEE A7.0 FOR FLOOR FINISHES. 10 S.S. CORNER GUARD / WALL CAP, TYP. ALL CORNERS IN BACK-OF-HOUSE FROM REAR
1/2" CEMENT WALLBOARD FROM T.O. SLAB WITH 1/2" CDX PLYWOOD W/FRP SURFACE FINISH TO 6" ABOVE CEILING HEIGHT U.O.N. IF DOUBLE SIDED SHEAR WALL C. SEE A8.0 - A8.3 FOR WALL FINISHES. WALL TO THE KITCHEN SIDE OF THE SERVICE COUNTER. SEE DETAIL 19/A6.3.
PLYWD IS SPECIFIED THE PLYWOOD SHALL SHALL BE CONTINUOUS FROM SILL PLATE TO TOP PLATE. SEE 4, 11 & 20 / A6.3.
- RESTROOM WALLS:
D. SEE A7.1 FOR CEILING FINISHES.
11 ELECT. PANELS RECESSED IN 2x6 WALL.
FLOOR
GENERAL:
5/8" CEMENT WALLBOARD FROM T.O. SLAB OR T.O. CONCRETE CURB TO 48" A.F.F. WITH 5/8" HI-IMPACT BRAND XP WALLBOARD, TYPE X CORE FROM T.O. CEMENT
BOARD TO 6" ABOVE CEILING HEIGHT U.O.N.. NO SUBSTITUTIONS ALLOWED. FINISH AS SCHEDULED. SEE 11 (SIM), 12 /A6.3.
A. PROVIDE THREE FIRE EXTINGUISHERS - (2) 10 lb. BC and (1) 10 lb. ABC - TO COMPLY WITH
LOCAL FIRE CODE. LOCATE PER DIRECTION OF FIRE MARSHALL OR LOCAL AUTHORIZING
12 LIGHTING CONTROL PANEL SURFACE MOUNTED. REFER TO ELECT. DWGS. PLAN
- ALL OTHER FRAME WALL CONDITIONS: AGENT.
B. DRAWINGS ARE BASED UPON WOOD FRAMING. UTILIZATION OF METAL STUDS ON 13 SYRUP LINE CHASE (ABOVE). SEE DETAIL 19/A6.4.
1/2" CEMENT WALLBOARD FROM T.O. SLAB OR T.O. CONCRETE CURB TO 48" A.F.F., WITH 1/2" GYPSUM WALLBOARD FROM T.O. CEMENT BOARD TO 6" ABOVE CEILING
NON-BEARING INTERIOR PARTITIONS, BULKHEADS AND SOFFITS IS ACCEPTABLE.
A1.0
HEIGHT U.O.N. FINISH AS SCHEDULED. 14 6"x6" HORIZONTAL OPENING FOR SYRUP TUBES. COORDINATE WALL PENETRATION
C. ALL ATTACHMENTS MADE THROUGH E.I.F.S. SHALL BE BUSHED TO PREVENT DAMAGE TO
THE FINISH, PER 9/A6.2. WITH COUNTER INSTALLER. SEAL CHASE TO COUNTER. SEE 11/A6.4.
D. ALL PENETRATIONS THROUGH E.I.F.S. SHALL BE SEALED USING MFR'S. APPROVED
METHOD.
PLOT DATE:
WALL LEGEND E FLOOR PLAN NOTES D KEY NOTES B
D
1. LAMINATE DOORS 4, 5, 6 & 7 AND PAINT FRAMES 3, 4, 5, 6 & 7. SEE FINISH SCHEDULE, SHEET A7.2.
1. DIMENSIONS ON THIS DWG. ARE TO FRAME EDGE. REFER TO SHEETS A1.0 AND A5
2. ALL HARDWARE SHALL BE US32D U.O.N.
SHEETS FOR ROUGH OPENING DIMENSIONS.
3. ALL HM FRAMES SHALL BE 16 GA STEEL U.O.N.
2. ENTIRE STOREFRONT SYSTEM SHALL BE DARK BRONZE ANODIZED.
4. ALL LOCKS SHALL BE FALCON 6 PIN INTERCHANGEABLE CORE SUPPLIED AND INSTALLED BY THE G.C. ALL
3. ALL SPANDREL GLASS SHALL BE DARK BRONZE TO MATCH FRAMES.
EXTERIOR LOCKS SHALL BE PROVIDED WITH CONSTRUCTION CORES. ALL PERMANENT CORES SHALL BE
KEYED ALIKE.
4. SEE SCHEDULE FOR GLASS TYPES.
5. PERMANENT CORES SHALL BE SHIPPED TO THE RESTAURANT GENERAL MANAGER.
5. REFER TO FLOOR PLAN, ELEVATIONS AND WALL SECTIONS FOR ROUGH OPENING
DIMENSIONS.
6. MOUNT DOOR CLOSERS ON RESTROOM OR KITCHEN SIDE ONLY.
6. ALL STOREFRONT MATERIAL AND GLAZING SHALL BE SUPPLIED AND INSTALLED BY G.C.
7. COMPLETE DOOR, FRAME AND HARDWARE PACKAGE INCLUDING: VISION PANEL (WITH 18 GA. HOLLOW METAL
U.O.N.
FRAME), CONTINUOUS HINGE, HEAVY DUTY CLOSER, RAIN DRIP, DOOR BOTTOM/ SWEEP, WEATHERSTRIP,
KICKPLATE AND PANIC HARDWARE, ORDERED THRU LOCKNET SECURITY DOORS, PART #DU3670L52VED
(1-800-887-4307).
PREFERRED SUPPLIER 8. PROVIDE PUSH/ PULL PLATES.
IF REQUIRED BY LOCAL CODE, STOREFRONT DOOR PANIC HARDWARE SHALL BE :
INTERIOR DOORS, FRAMES & HARDWARE
DOR-O-MATIC 2092 RIM PANIC HARDWARE AND EXTERIOR PULLS WITH QUALITY #520 DOOR PULL.
LOCKNET
MIKE MOYNAHAN 9. MOUNT KICKPLATE ON PUSH SIDE ONLY.
100 COURCHELLE DRIVE
NICHOLASVILLE, KY 40356 10. MAXIMUM DOOR OPERATING PRESSURE : 5 LBS INTERIOR : 15 LBS EXTERIOR.
800-887-4307 FAX : 859-887-4958
11. ADA COMPLIANT ACCESSIBILITY SIGNAGE, INCLUDE BRAILLE AS REQUIRED BY LOCAL JURISDICTION - (1) MEN;
(1) WOMEN
GLASS SCHEDULE 12. RESTROOM SIGN REQUIRED.
A 1" INSULATED GLASS D SAFETY GLASS BY MFR. 13. INSTALL WITH REMOVABLE DOOR STOPS AND WEATHER STRIPS.
B 1" INSULATED TEMPERED GLASS
14. FRAMES SHALL BE PAINTED.
C 1/4" TEMPERED GLASS
NOTE: 15. RESTROOM PARTITIONS : BOBRICK 1080 SERIES, WITH STAINLESS STL. 1 1/2" WALL POST, LATCH , KEEPER,
SHADING COEFFICIENT SPECIFICATION PER LOCAL CODE REQUIREMENTS. COAT HOOK (DTL 20/ADA1.0) & MOUNTING BRACKETS. INSTALL PER MANUFACTURER'S SPECIFICATIONS &
DAYTIME VISIBILITY INTO DINING ROOM SHALL BE MAINTAINED. DETAILS. DOOR HANDLE AND LATCH SHALL BE MOUNTED AT 36" A.F.F.
**** ALL STOREFRONT GLAZING SHALL BE LOW "E" SOLAR GLASS ****
GREEN 16. PROVIDE LATCH AND STRIKE PLATE HARDWARE BY DOOR MFR. TO BE COMPATIBLE WITH LOCKS
NOT USED N.T.S. 10 NOTES N.T.S. 7 NOT USED N.T.S. 4 DOOR SCHEDULE NOTES 1
DOOR
SIM. DOOR BUTTS LOCKS CLOSERS KICKPLATE THRESHOLD MISCELLANEOUS
STOP
FRAME
DOOR SIZE DETAIL LOCATIONS DOOR NOTES
DOOR
1 1
PUSH
PULL
NO.
TYPE
A6.1 A6.1 1 2 3 4 1 2 3 4 5 6 7 1 2 3 1 2 3 1 2 3 4 1 2 3 1 2 3 4 5 6
ACCESSIBLE ALUM. THRESHOLD BY DOOR MFR.
FULL LENGTH LATCH PROTECTOR INCL. IN PKG.
* LESS
WALL STOP - ASA 0714 COAT HOOK W/ BUMPER
THAN DOOR CONSULTANT'S
STD. ADJUSTABLE DOOR SWEEP PER DR. MFR.
FALCON 1690 CONCEAL VERT. PANIC HARDWR
9'-0"
H.D. TYPE 304 S.S. BOBRICK SPRING LOADED
WIDTH
SEAL
PANIC HARDWARE INCLUDED IN PACKAGE
2'-0"
1 1/2 PR McKINNEY #TA2731, 4-1/2" x 4-1/2"
*
FALCON C953-7 OR C987-7 AS REQUIRED
B
STAINLESS STEEL 10" x .050 X 2" L.T.D.W.
PUSH PLATE ROCKWOOD 70F - 8" x 16"
PROVIDE A SIGN STATING "THIS
CONT. HINGE INCLUDED IN PACKAGE
PULL PLATE TRIMCO 1017-3B - 4" x 16"
ONE PAIR OFFSET PIVOTS PER DOOR
DOOR TO REMAIN UNLOCKED
THRESHOLD INCLUDED IN PACKAGE
SIM. SIM.
KICKPLATE INCLUDED IN PACKAGE
FLOOR STOP - ROCKWOOD 441 CU
SWEEP (VISTA 231 STD) NGP 101VA
HINGE STOP - ROCKWOOD 532.NP
DURING BUSINESS HOURS"
FALCON "T" SERIES - PRIVACY SET
MANUFACTURER, TOP & BOTTOM
CLOSER INCLUDED IN PACKAGE
12 3 3 3 2
7'-6"
FALCON #T351 CLOSET LOCK
SEE DOOR TYPE ELEVATIONS
A6.1 A6.1 A6.1 A6.1 A6.1
9'-0"
9'-0"
7'-0"
COAT HOOK - BOBRICK
FALCON #T511 DG WIC
2
A6.1 A A A B
UNDERCUT 3/4"
1'-6"
1'-6"
I.D.C. 8051
I.D.C. 8052
DOOR SIGN
0'-0"
HEAD
JAMB
SIDE ELEVATION SIDE DOOR
SILL
1 1
1 3'-0" x 7-0" x 1-3/4" A AL AL X X X X X X X 12/A6.1 8, 10, 16
2 (2) 3'-0" x 7-0" x 1-3/4" B AL AL X X X X X X X 12/A6.1 8, 10, 13, 16
3 3'-6" x 7'-0" x 1-3/4" C HM HM X X X X X X X X 9/A6.1 6/A6.1 10/A6.2 6, 7, 10
D MISC.CHANGES 10.25.13
4 3'-0" x 6'-8" x 1-3/4" D WD HM X X X X X X X X X X 10/A6.4 10/A6.4 6, 9, 10, 11, 12, 14
SIM.
5 3'-0" x 6'-8" x 1-3/4" D WD HM X X X X X X X X X X 10/A6.4 10/A6.4 6, 9, 10, 11, 12, 14
1
A6.1 6 3'-0" x 6'-8" x 1-3/4" E WD HM X X X X X 10/A6.4 10/A6.4 9
9'-0" 7 2'-0" x 6'-8" x 1-3/4" F WD HM X X X X 10/A6.4 10/A6.4
B B
SIM.
2 3 3 4
7'-6"
A6.1 A6.1 A6.1 A6.1
9'-0"
B
2
A A
B A6.1 DOOR SCHEDULE 2
SIM. CONTRACT DATE: XX.XX.XX
1'-6"
BUILDING TYPE: LIVE MAS MEDIUM54
1'-6"
0'-0" PLAN VERSION: March 2013
3'-0" 2'-6"
FRONT DOOR FRONT ELEVATION SITE NUMBER: XXX-XXX
2
STORE NUMBER: XXXXX
18
A6.1
TACO BELL
SIM. 5 FRAME FOR TYPE
1 9 123 MAIN STREET
A6.1 A&B DOORS
A6.1 A6.1 ANYTOWN, USA 98765
6'-2" SHOWN IN 9/A1.1
C 2"
LOW "E" GLASS SIGN WHERE EQ. L EQ. 3'-0" 3'-0"
9'-0" 6" 6"
NOTED
D
1'-0" 1'-0"
6"
1'-1012"
8'-0"
A A B
R.O. B-140
3'-0"
C 11
4 3 4 4 2 1'-0"
7'-6"
17 C C C
LIVE MAS
7'-0"
7'-0"
A6.1 A6.1
3'-0"
A6.1 A6.1 A6.1 A6.1
9'-0"
A6.1
5'-0"
MEDIUM54
2 3'-1 1/2" SIM
1"
3'-6"
3'-6"
3'-0"
A6.1 R.O.
SIM.
10"
10"
1'-6" 6 DOOR & WINDOW
1'-6"
FINISH FLOOR
2"
A6.1
KICKPLATE
ELEVATIONS
1
0'-0" KICKPLATE 10 17 17
4'-0" KITCHEN SIDE
ON PUSH A6.1 A6.1 A6.1
ONLY
3
DRIVE THRU SIDE
4 (DRIVE-THRU. WINDOW B-140)
SIDE ONLY
STOREFRONT
AND
UNDERCUT STOREFRONT
SEE ALSO DETAIL 16/A6.1
NOT LOW "E": SOLAR GLASS - SEE M2.0 SYSTEM SYSTEM
SCHEDULES
NOTE: ELEVATIONS DRAWN AS VIEWED FROM EXTERIOR OF BUILDING. NOTE: ELEVATIONS DRAWN AS VIEWED FROM EXTERIOR OF BUILDING OR OUTSIDE ROOM.
A1.1
PLOT DATE:
WINDOW TYPES 1/4" = 1'-0" 9 DOOR TYPES 1/4" = 1'-0" 3
B-241
S-204 B-251
K-420 B-290
S-570 S-570
U-250 B-405 A
S-274
B-406 (2) S-600 N-053 7
U-024 A8.1
S-513 8 N-150 1 B-400
B-140 U-070 N-135
S-284 K-380 14 E-275
S-375
F
G13 G14 U-121 K-518 K-602
D-513 D-513 D-513 D-513 D-513 D-513 D-513 D-513 F-160 F
U-152 B-400 K-132
U-100
(2) U-238
G16 G17 D-505 D-505 D-505 D-505 F-090 G
U-250 U-239
ADT
S-444 S-482 R-037 P-541 U-054
(3)
DEMARC
S-285 U-061 U-250 C-016 C-400 C-107
S-544 S-349
3'-312"
P-332 C-502 P-417 C-502
CLEAR
S-443 S-513 (2) 13
D-534 S-023
U-238 U-242 K-657
3
D-531 H U-250 U-239 16
S-547 S-489 S-453 U-238 (2 EA) 10
G5 F-030
12" MIN.
F-915 F-920 S-254
S-639 R-034 K-611 H
S-004 B-400
S-352
S A
R
H
T
C-201
D-503 H S-544
(H)
F-500 S-544 3'-0" H
TYP. 15 S-005 B-400
CLEAR
D-523 D-500
D-536 S-546 K-611 CONSULTANT'S
D-539 U-052 P-315
B-405 N-130
TYP.
D-518
H
U-250
S-065
S-453 C-250 U-250 S-024 B-290
B-405
P-673 14 N-171
SEAL
CLEAR
N-698 P-550
3'-0"
D-519 D-558 S-489 B-241 (2) P-452 K-210
L-014 N-053
D-505 B-251
D-511 K-490 G N-150 B-405
D-500 U-054 N-135
3 (H) (H) F-090 K-602 K-602
U-070 K-517 F W-053
D-500 U-070 H
TYP. U-100 K-699
D-549 U-121 U-061 K-657 K-699
D-507 D-536 K-602 K-522 K-602
(ABOVE) U-152 E K-602 F F
S-482 K-602 10
F-160
3 K-708 B-405
4
3
TYP. H
TYP. G
F-090
D-539 D-524 N-043 K-523
D-536 (2) S-600
K-699
F-915 S-540
B-599 9
S-550 K-699
D-502 N-071 F B-223
D-507 D-507 D-503 D-503
(H) N-208 12
D K-221 S-580
5 G15 G19 G18 G12
6
TYP.
D MISC.CHANGES 10.25.13
E PROTOTYPE UPDATES 12.9.13
B-219 F
S-381 F PROTOTYPE UPDATES 12.17.13
A S-286
G PROTOTYPE UPDATES 1.30.14
A8.1
H PROTOTYPE UPDATES 3.10.14
L-150
2
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
EQUIPMENT/SEATING PLAN 1/4"=1'-0" A
DECOR
TACO BELL
1 HOOD FIRE SUPPRESSION SYSTEM (ANSUL R-102 OR EQUAL).
SYM. QTY. ITEM SYM. QTY. X QTY. ITEM REMARKS 1. REFER TO SC SHEETS FOR SCOPE OF WORK RESPONSIBILITIES.
2. (H) - SYMBOL DENOTES A HIGH TABLE OR DINING COUNTER WITH STOOLS. 2 SEE SHEET A1.1 FOR SECURITY DOOR PACKAGE. 123 MAIN STREET
D-500 3 TABLE - OVAL - BAR HEIGHT - 24" X 30" - CORE DRILL BASE D-534 1 SCREEN WALL G12 1 TASTE EXPLOSION 1 OF 4 SEE A8.0 FOR LOCATION ANYTOWN, USA 98765
3. - SYMBOL DENOTES A HANDICAP ACCESSIBLE TABLE. 3 MAINTAIN 36" MIN CLEAR AISLE EGRESS PATHS TO EXIT DOORS.
E G15 1 TASTE EXPLOSION 2 OF 4 SEE A8.0 FOR LOCATION
D-502 1 TABLE - OVAL - BAR HEIGHT - 30" X 60" - CORE DRILL BASE D-536 21 FORMED WOOD SHELL DINING CHAIR
4 30" x 48" CLEAR FLOOR SPACE FOR HANDICAP ACCESS.
E
G18 1 TASTE EXPLOSION 3 OF 4 SEE A8.0 FOR LOCATION
D-503 4 TABLE - RECTANGLE - STD HEIGHT - 18" X 24" - CORE DRILL BASE D-539 14 FORMED WOOD SEAT "HALF-BACK" STOOL 5 DOT INDICATES CORE DRILL LOCATION. CORE DRILL LAYOUT TO BE
G19 1 TASTE EXPLOSION 4 OF 4 SEE A8.0 FOR LOCATION PROVIDED BY THE SEATING VENDOR. SEE DETAIL 7/A6.3 AND SCOPE OF
D-505 5 E TABLE - RECTANGLE - STD HEIGHT - 24" X 40" - CORE DRILL BASE D-549 1 SOFFIT BY DISTRIBUTOR. WORK. CHANGE CORE DRILL BITS TO MATCH DECOR BASE SIZE TO
G13 1 VOLCANO TARGET SEE A8.0 FOR LOCATION MAINTAIN 3 /8" MAX GROUT LINE AROUND BASE
D-507 3 TABLE - RECTANGLE - STD HEIGHT - 24" X 40" - CORE DRILL BASE (ADA) G14 1 NYC TACO TAXI SEE A8.0 FOR LOCATION
D-511 1 DIVIDER WALL - 90" LONG
G16 1 TACO NIGHT TIME SEE A8.0 FOR LOCATION
6
7
PULL STATION @ 3'-8" A.F.F.
GAS LINE DOWN TO EQUIPMENT.
LIVE MAS
MEDIUM54
G17 1 TACO BEACH BELL SEE A8.0 FOR LOCATION
8 COORDINATE LOCATION OF HORIZ PVC SYRUP CHASE THROUGH WALL TO
D-513 8 E
OPEN BACK BENCH SETTEE - 42" GENERAL NOTES C1 COUNTER.
D-518 1 BACKLESS BENCH SETTEE - 38" G5 1 NUTRITION BOARD SEE A8.0 FOR LOCATION
STORAGE TYPE LINEAR FT.
9 6" HIGH WATER HEATER PLATFORM.
EQUIPMENT
10 SWITCHGEAR / ELECTRIC PANELS.
D-519 1 BACKLESS BENCH SETTEE - 42"
11 NOT USED.
AND
D-523 1 SINGLE TRASH RECEPTACLE
DRY STORAGE 40
12 8' LADDER.
SEATING
G
D-524 1 DOUBLE TRASH RECEPTACLE COLD STORAGE 21
13 BRINKS SAFE. PLAN
SERVICE COUNTER - 127" FROZEN STORAGE 14
D-526 1
A2.0
14 SPLASH GUARD.
D-531 1 CONDIMENT COUNTER - SQAURE CORNERS 15 ALERT LIGHT BOX FOR 3-COMP POWER SOAK.
16 ROOF LADDER.
PLOT DATE:
SEATING PACKAGE - BY SEATING VENDOR U.O.N. (TOTAL SEATS = 54) E ARTWORK SCHEDULE D SHELVING QUANTITIES REQUIRED C2 KEYNOTES B
EQUIPMENT SCHEDULE EQUIPMENT SCHEDULE
NO. QTY G.C. INST. ITEM DESCRIPTION MFR. & MODEL NUMBER PLUMB ELECT GAS REMARKS NO. NO. QTY G.C. INST. ITEM DESCRIPTION MFR & MODEL NUMBER PLUMB ELECT GAS REMARKS NO.
LOG TO NG -
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
B CONTRACTOR BUILDING ELEMENTS L LIGHTING/SIGNAGE/MENUBOARDS
REVIEWED AND ADAPTED BY A LICENSED
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
B-049 1 X ROOF LADDER PRECISION #FL184 15'-4" WITH 8" EXTENSION B-049 L-014 1 X INTERIOR MENU BOARD PACKAGE - ROTATING, 10-PANEL THE HOWARD COMPANY #9TB0042 X LED INTERNALLY ILLUMINATED L-014
O
R ELEMENTS
B-050 1 X ROOF HATCH PRECISION #PH-G2'-6"x3'-0" 2'-6" X 3'-0" CLEAR OPENING B-050 L-090 1 X OCB HYPERACTIVE #TDM-HX1-H05-TCB FRANCHISE OPTION L-095 L-090
T'S PRIOR
B-140 1 X DRIVE-THRU WINDOW QUICKSERV #SC-4030BR G.C. TO PROVIDE TRANSOM - DARK BRONZE ANODIZED B-140 REQUIRES THE USE OF XPIENT POS SYSTEM TEXAS DIGITAL # AV150IECEAVNG60
R PSITE-SPECIFIC
READY ACCESS #275 47.5"Wx35.7"H L-150 1 X SECURITY DOOR DANGER SIGN ADVERCO#ADVCUSTOM ORDERED DIRECT FROM YRFS L-150
B-223 1 X WATER HEATER AO SMITH BTH 120 60 CYCLONE HE X X B-223
N SINKS/DISHWASHERS
REGIONAL ARCHITECTURAL PARTNER (RAP)
B-241 4 X SOAP DISPENSER (WALL MOUNT) KAY 3741 SURFACE MTD B-241
IMAGE
B-251 2 X SANITIZER DISPENSER KAY 3741 SURFACE MTD. B-251 N-043 1 X 3-COMP POWER SOAK 102"L x 31"D (R TO L) METCRAFT #PS6750 X X N-043
RIO
KITCHEN OPERATIONS MUST BE APPROVED
B-265 2 X MIRROR, 18" X 36" BOBRICK #B-165-1836 SURFACE MTD B-265 N-053 2 X HAND SINK (KITCHEN) AERO #HS-MOD X N-053
B-275 2 X TOILET PAPER DISPENSER BOBRICK #B-2890 SURFACE MTD B-275 N-071 1 X MOP SINK FAUCET T&S #B-2456 -W-MAX X N-071
CONSTRUCTION.
L
NSTHE
B-290 2 X PAPER TOWEL DISPENSER BOBRICK #B-262 SURFACE MTD. B-290 N-130 1 X 1 COMP. SINK FAUCET T&S FAUCET B-2463 X FOR N-699 N-130
ITH MEFOR
U
B-292 2 X PAPER TOWEL DISPENSER / TRASH 12 GALLON BOBRICK #B-3942 SEMI-RECESSED B-292 N-135 2 X HAND SINK FAUCET T&S FAUCET B-2456-W-119X X SPLASH MOUNTED, FOR N-053 N-135
MODIFICATIONS THAT CHANGE
B-300 2 X GRAB BAR 1-1/2"DIA X 36" S.S. FIN. BOBRICK #B6806X36 SURFACE MTD B-300 N-134 2 X FAUCET T&S FAUCET B-2460 X N-134
JURISDICTIONAL REQUIREMENTS
O
B-305 2 X GRAB BAR 1-1/2"DIA X 42" S.S. FIN. BOBRICK #B6806X42 SURFACE MTD B-305 N-150 2 X HAND SINK FOOT PEDAL T&S B-0507 X FOR N-053 N-150
CE WENGINEER I
C
B-400 3 X WASTE BASKET - 32 GALLON RUBBERMAID #2632 (GREY) B-400 N-171 1 X 1 COMP. SINK WASTE DRAIN LEVER T&S FAUCET S-20 X 2" TWIST TYPE, FOR N-698 N-171
B-405 8 X WASTE BASKET RUBBERMAID SLIM JIM #3541 (GREY) B-405 N-208 1 X MOP SINK 24"X24" FLOOR MOUNT SINK AERO MANUF. CO., INC. #3MP-2121-6/1P X INCLUDES (2) 24"X36" WALL PANELS N-208
THITEMPLATE
B-406 1 X WASTE BASKET RUBBERMAID 28 QT #2956 (BLACK) B-406 N-698 1 X 1 COMP PREP SINK 53"W X 27"D X 35 1/2"H AERO #2F1211617LR X N-698
MUST BEIS
B-410 1 X SANITARY NAPKIN RECEPTACLE RUBBERMAID #6140 INCLUDES ACCESSORY KIT & MOUNTING HARDWARE B-410
P FOOD PREPARATION
D
ARCHITECT AND/OR
B-599 1 X MOP SINK STATION ISS #WST806Y X B-599
S
P-314 1 X WATER PRESSURE REGULATOR KIT A.J. AUTUNES & CO. #7000314 X P-314
DOCUMENT
P-315 1 X REVERSE OSMOSIS SYSTEM CUNO #FSTM-HP X REQUIRES FLOOR SINK P-315
PLA
P-332 1 X DUAL LINE, 157" READY TO ACCEPT EVO CABINETS X X DUKE - WEST / DELFIELD EAST P-332
DRAWINGS
C COOKING EQUIPMENT
THESE
E
C-016 1 X SINGLE OPEN FRYER W/ UNDER-FRYER FILTER SYSTEM FRYMASTER #FPH55SD X X COMES WITH GAS HOSE KIT. OPTION: WITHOUT FILTER C-016 P-417 1 X 8-CHANNEL TIMER FAST #TRACK2X4TB X ALTERNATE: PRINCE CASTLE #755HM8TB P-417
R
C-107 1 X RETHERMALIZER PITCO #TB-SRTG14-2 X X X COMES WTH GAS HOSE KIT C-107 P-452 2 X HOT WATER SYSTEM BUNN-MACHINE #43600.0014 X X W/ BRACKET, FRONT MOUNT: P-452
REM
C-201 2 X SPLIT LID CLAM SHELL TOASTER PROLINE PROGRILL SL1577YA X POWERED BY PRODUCTION LINE C-201
C-250 2 X CHEESE MELTER (SINGLE) A. J. ANTUNES # CM-100 X X POWERED BY PRODUCTION LINE C-250 P-541 1 X STORAGE BINS B4B SYSTEMS #0307010 P-541
C-400 1 X COOK TIMER FAST #TBZAP12 X FOR THE RETHERMALIZER C-400 P-550 1 X KNIFE RACK EDLUND #KR-99 P-550
P-673 1 X WORK TABLE, 36" X 30" ISS #WST908A FOR RETHERMALIZER AND HOT WATER P-673
R REFRIGERATION
R-034 1 X MINI REFRIGERATOR SILVER KING SKPS3 X R-034
E EXHAUST HOODS/FIRE SUPP. R-037 1 X 1/2 HT. FREEZER (LH) STD. CASTERS DELFIELD 407CA, LH X R-037
E-272 1 X TIMER OUTLET X E-272
E-275 1 X TB HOOD STRATOVENT MODEL # SVBD2 X PRE-PIPED FOR ANSUL SUPPRESSION E-275
E-276 1 X SS BACK SPLASH X E-276
S SERVING/DRIVE-THRU
S-004 1 X HEAT CABINET - FULL HEIGHT - (1) LH BEVLES #CS82-CH8 120LH X W/ 8 SHELVES EACH S-004
CONSULTANT'S
S-005 1 X HEAT CABINET - FULL HEIGHT - (1) RH BEVLES #CS82-CH8 120RH X W/ 8 SHELVES EACH S-005 SEAL
S-023 1 X WARMER,EVO TACO TOWER,TB,208V, L TO R UNIT CARTER HOFFMAN #EVOR208 X MOUNT ON PRODUCTION LINE OVER SHELF S-023
F OFFICE/EMPLOYEE/MUSIC/MISC. S-024 1 X WARMER,EVO TACO TOWER,TB,208V, R TO L UNIT CARTER HOFFMAN #EVOR208 X MOUNT ON PRODUCTION LINE OVER SHELF S-024
F-014 1 X FILE CABINET (2 DRAWER HIGH) 18" x 36" x 27"H 9336P2FIH IN OFFICE. SEE SHEET A8.1 F-014 S-065 1 X DESSERT TOWER HATCO #GRBW-24D X MOUNT ON PRODUCTION LINE OVER SHELF S-065
F-021 1 X CHAIR - OFFICE HON #5831 IN OFFICE. SEE SHEET A8.1 F-021 S-204 1 X DRIVE-THRU TIMER SYSTEM HME #C11422TB X MOUNT ON DT WINDOW HEADER S-204
F-022 1 X LICENSE FRAME 8" X 10" (BLACK) CREATIVE PALETTE TB30 IN OFFICE. SEE SHEET A8.1 F-022
F-030 1 X COAT HOOKS ISS #HOOK246R2Y F-030 H
S-274 1 X BEVERAGE COUNTER DRIVE THRU (36" x 61") ISS #WST1242YA W/ ISS #CONDTOW24L S-274
F-040 1 OFFICE COMPUTER POS PROVIDED X IN OFFICE. SEE SHEET A8.1 F-040 S-349 1 X PICK-UP DRIVE-THRU COUNTER (30" x 42") S-349
F-050 1 CREDIT CARD SATELLITE ROUTER JUNCTION YUM X F-050 S-284 1 X BEVERAGE DISPENSER - SELF-SERVE CORNELIUS 611057625 X X (BY PEPSI) S-284
F-060 1 MONITOR-OFFICE YUM IN OFFICE. SEE SHEET A8.1 F-060 S-285 1 X BEVERAGE DISPENSER - DRIVE THRU SERVEND NGF-250QD X X OR CORNELIUS IDC255 PROGATE 5 (BY PEPSI) S-285
F-080 1 OFFICE PRINTER/ COPIER/ FAX/ SCANNER POS PROVIDED X IN OFFICE. SEE SHEET A8.1 F-080 S-286 1 X WATER FILTER SYSTEM SHURFLO # WB6-M3-22-003 X X FRACHISEES CAN USE SELECTO #TB5/620-5 S-286
F-090 4 UPS (UN-INTERUPTABLE POWER SUPPLY) POS PROVIDED X F-090 S-375 1 X SELF SERVE DRINK COUNTER CARTER HOFFMAN #CH3TDS72N55 S-375
F-102 1 MONEY COUNTER TELLERMATE #TIX3000 X F-102 S-443 1 18"Hx23"Dx10"W STRAW - LID DISPENSER CAL-MIL ADA TB103 S-456
F-131 1 MUSIC SYSTEM MUZAK #6848. LOCAL LEASE X MUZAK (LOCAL LEASE) F-131 S-453 2 X T-SHIRT BAG HOLDER FRANKE #7911166 S-453
F-160 4 X DROP SAFE PERMA VAULT #PRO-10 F-160 H S-352 1 X 40"(W) X 36"(D) DRIVE-THRU DRINK TABLE # TBD S-352
S-444 1 X NAPKIN DISPENSOR #5555100 S-444
F-174 1 X SAFE WITH TOUCH SCREEN CONTROLS BRINKS SAFE A-GALILEO 111-01 X 3-DOOR F-174 S-482 2 X CUP DISPENSER A.J. ANTUNES #DACS60 W/ ANGLED MOUNTING BRACKET OMNITEAM CDB-DTA S-482
F-211 1 X CLOCK B&B SYSTEMS #03060425 IN OFFICE. SEE SHEET A8.1 F-211 S-489 2 X DIGITAL SCALE EDLUND DS-10 X FRANCHISEES CA USE HOSHISAKI KMS-1230 S-489
S-513 2 X ICE MAKER (PLACED ON TOP OF DRINK MACHINES) MANITOWOC #SY-1474C X X W/ ROOF MOUNTED CONDENSERS S-513
F-270 1 X FIRST AID KIT PROSTAT FIRST AID LLC #2617 IN OFFICE. SEE SHEET A8.1 F-270
D MISC.CHANGES 10.25.13
S-540 1 PEPSI BOOSTER TANK X X SEE SCOPE OF WORK (PEPSI) S-540
H E PROTOTYPE UPDATES 12.9.13
S-544 3 X ICED TEA DISPENSER BUNN TDO-N-3.5 3.5 GALLON NARROW ICED BEVERAGE DISPENSER S-544 F PROTOTYPE UPDATES 12.17.13
S-546 1 X ICED TEA BREWER TETLEY TB3Q X X S-546
G PROTOTYPE UPDATES 1.30.14
F-500 2 X STACKABLE HIGH CHAIR KOALA #KOAKB10301 F-500 S-550 1 BAG-N-BOX SYRUP RACK CORNELIUS/REMCOR BNB12B8P X FLO-3REG-2CRB (BY PEPSI) S-550
F-915 2 X FLOOR MAT 3' X 5' ENTRANCE, INC. #41150012 RUBBERIZED F-915 S-570 2 CARBONATOR CORNELIUS/REMCOR X X SHELF MOUNTED BELOW EACH DRINK DISPENSER (BY PEPSI) S-570 H PROTOTYPE UPDATES 3.10.14
F-920 1 X FLOOR MAT 2' X 8' ENTRANCE #4-4450 RUBBERIZED @ DRINK STATION F-920 S-580 1 CO2 (BULK) TANK MVE #11805373 WITHOUT IMPURITY RING S-580
S-381 1 X CO2 CARBON DIOXIDE SENSOR/WARNING AMPROBE C02-200 X S-381
K WORKSTATIONS/SHELVING/CARTS S-600 - X BUNDLED SYRUP LINES CORNELIUS/REMCOR TUBE BUNDLE X SEE SCOPE OF WORK (PEPSI) S-600
K-132 1 X CLOSING CART ISS #WST1434Y K-132 S-639 1 X FROZEN BEVERAGE DISPENSER CORNELIUS VIPER #621360041TB X X W/ BOOSTER AND INSTALLATION KIT S-639
G
K-210 1 X PREP SINK WORKSTATION 50" TRACK ISS #WST255E WALL TRACK SHELVING K-210 S-547 1 BUNN POD BREWER MY CAFE AP AUTOPOD #42300.0001 X S-547
K-221 1 X 3 COMP. SINK WORKSTATION 96" TRACK ISS #DS-1F WALL TRACK SHELVING K-221 H S-254 1 CONDIMENT RACK PRONTO PRODUCTS #CHPW0446 S-254 CONTRACT DATE: XX.XX.XX
K-380 1 X FRY WORKSTATION 30"W x 30"D x 75"H ISS #FRYTAB3030YA K-380 BUILDING TYPE: LIVE MAS MEDIUM54
K-420 1 X CARBONATOR PLATFORM SHELF 18" X 24" ISS #WST34Y K-420
PLAN VERSION: March 2013
K-490 2 X FRONT COUNTER SHELVING 18" x 24" x 24" (2 TIER) ISS #WST440Y UNDER SERVING COUNTER K-490
SITE NUMBER: XXX-XXX
K-517 1 X PREP RACK 18" X 60" X 76" (6 TIER) ISS #WST1469Y K-517 STORE NUMBER: XXXXX
K-518 1 X FRY RACK 24" X 36" X 76" (6 TIER) ISS #WST1470Y K-518
U SECURITY/COMM./FIRE PROT./POS
U-009 1 X D/T COMM. SYSTEM HME #C30000 - 6 - HS - XUM, HME #K99912 X U-009
U-052 1 X SECURITY SYSTEM ADT #3BCZTB X CROSS ZONE SECURITY SYSTEM U-052 TACO BELL
U-054 1 X CCTV DVR & MONITOR MARTCO - NUVICO DVR X WITH 2 CAMERA. SEE DETAIL 4/E6.0 FOR MNTG. MONITOR U-054
U-061 2 CREDIT CARD READER (VSAT) X U-061 123 MAIN STREET
K-522 1 X SMALL PKG. RACK 18" X 60" 76" (5 TIER) ISS #WST1548Y K-522
ANYTOWN, USA 98765
K-523 1 X CUP & LID RACK 18" X 60" X 76" (3 TIER) ISS #WST1580Y K-523 U-070 3 RECEIPT PRINTER IBM, NCR & PAR X 2 FOR F/C AND 1 D/T U-070
U-100 4 POS/ORDER ENTRY TERMINAL IBM, NCR & PAR X 2 FOR F/C AND 2 D/T U-100
U-121 3 CASH DRAWER BRACKETS IBM, NCR & PAR SEE SCOPE OF WORK U-121
U-152 3 CASH DRAWER IBM, NCR & PAR SEE SCOPE OF WORK U-152
H
K-611 2 X SHELVING UNIT 24" x 48" x 86"H (5 TIER) ISS #WSTSU1848-8-5Y WALK IN COOLER K-611
K-602 6 X SHELVING UNIT 18" X 36" X 86"H (5 TIER) ISS #WST238Y K-602 U-238 5 KITCHEN MONITOR IBM, NCR & PAR X U-238
G
K-657 2 X SHELVING UNIT 24" X 72" X 86"H (5 TIER) ISS #SU247285Y WALK-IN COOLER K-657 U-239 3 X MONITOR CEILING MOUNTED BRACKET IBM, NCR & PAR FOR ONE MONITOR EACH. SEE DETAIL 2/A6.3 U-239
K-699
K-708
4
1
X
X
SHELVING UNIT 18" X 60" X 74"H (4 TIER)
DUNNAGE RACK
ISS #SU186075Y
ISS#WST1702Y
WALK-IN COOLER
UNDER FRONT COUNTER
K-699
K-708
H
U-242
U-250
1
6
X MONITOR CEILING MOUNTED BRACKET
BUMP BAR
IBM, NCR & PAR
IBM, NCR & PAR
FOR TWO MONITORS EACH. SEE DETAIL 2/A6.3
WITH MOUNTING PLATE
U-242
U-250
LIVE MAS
MEDIUM54
W WALK-IN COOLERS/FREEZERS
H
W-053 1 X WALK-IN COOLER/FREEZER ICS/NORLAKE X X 1 COOLER, 1 FREEZER. XDX & EPACT (CORPORATE STORES) W-053
NOT APPROVED FOR THE NORLAKE VERSION CAPSULE PAK
EQUIPMENT
B D/T CLEARANCE BAR, SECURITY DOOR, WATER HEATER, D/T WINDOW, RESTROOM ACCESSORIES, AIR N POWERSOAK, KITCHEN HAND SINKS, PREP. SINKS, DISHWASHERS SCHEDULE
DOOR/CURTAIN, MOP SINK, HAND SINK ACC., CORNER GUARDS, MATS P M.A.P.S. LINES, I-LINES, PACK LINES, BREADERS, MARINATORS, HOT WATER, WORK TABLES, CHEESE
C FRYERS, OVENS, GRILLS, RETHERMALIZERS, TOASTERS, MICROWAVES MELTERS
A2.1
E KITCHEN EXHAUST HOODS, FIRE SUPPRESSION EQUIPMENT R REFRIGERATORS AND FREEZERS (NOT WALK-IN)
F SAFE, OFFICE EQUIPMENT, EMPLOYEE STORAGE/BREAK S DRINK SYSTEMS & EQUIP., HEAT CABINETS, STAGERS, WARMERS, SERVING EQUIP., D/T EQUIP.
K SHELVING, WORKSTATIONS, CARTS, RACKS, DOLLIES U SECURITY SYSTEM, LOCKS, CCTV, D/T COMMUNICATIONS/POS SYSTEM, POS EQUIP.
L SITE LIGHTING, SIGNAGE, MENUBOARDS W WALK-IN COOLERS/FREEZERS
PLOT DATE:
F
G
CL CL CL
18'-5" 18'-9" 7'-7"
A B GREEN
A5.0 A5.1 4
E
GREEN
22'-1" 13 18'-10"
14 30 11 11 11
T.O. FRAMING T.O. FRAMING
TYP. 15 30
19 TYP.
1/2 OPE
S L :12
S L :12
S L :12
10'-0" MIN
SL
E
E
1'-6
30
OP
OP
OP
:12
1/2
1/2
1/2
TYP
1/2 OPE
G
" 1 Y P.
SL
TO EXHA
5'-1"
4'-3"
. T
:1
5'-2"
10 30
R5
'-6"
2
. CLEARA
'-0
TYP.
"
UST
14 15
15 30
10'
D
NCE
-0"
20 GREEN
TYP.
MIN XHAU
TYP.
TO
25 1 RTU 2
15
.C
E
A 24 5
LEA T
A5.2 TYP.
RA
S
NC
E
GREEN
15
1 14 2
EF 1 7
9 A6.0 CONSULTANT'S
25 2'-6" 15 SIM.
8 SEAL
SLOPE 1/2 : 12
SLOPE 1/2 : 12
G 6 22
14 19 7
22'-1" HOLD
A6.0 8
9
C
MIN.
5'-9"
12"
GREEN
" SIM. 15
'-0 B
RTU 1 15 R5
A5.2
21'-0" 6 SIM.
23 14
T.O. SLAT WALL
22
30 24 21
23 15
SIM. 3
15
15
SIM. EF 2 SIM.
24 21
29 28
13 12
GREEN 14 14 B D MISC.CHANGES 10.25.13
30 D
F PROTOTYPE UPDATES 12.17.13
A5.2
G PROTOTYPE UPDATES 1.30.14
30 30
20'-9" 12 13 20'-9" 18'-10" TYP. TYP. 18'-10" 19'-5"
T.O. FRAMING B T.O. FRAMING T.O. FRAMING T.O. FRAMING T.O. FRAMING
A5.0 G
GREEN
31'-0" HOLD A D
A5.1 A5.1
PARAPET
COPING A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PARAPET STEP ELEVATION PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
ROOF PLAN 1/4"=1'-0" A
PRIMARY SCUPPER
TACO BELL
WATERPROOFING: 1 ROOFTOP UNIT. INSTALL PLUMB AND LEVEL.
A. PAINT UNDERSIDE OF PARAPET CAP FLASHING WITH FACTORY BONDED PAINT GRIP OR 18 NOT USED.
PRIMER. 123 MAIN STREET
2 KITCHEN HOOD EXHAUST FAN. SEE SHEETS M3.0 & DETAIL 19/A6.0. 19 WASTE VENT THROUGH ROOF. THE TOP OF WASTE VENTS SHALL BE 12" HIGHER THAN
VERTICAL WALL B. TOP NAILING AT PARAPET CAP FLASHING WILL NOT BE ACCEPTED. ANYTOWN, USA 98765
THE CLOSEST PARAPET CAP U.N.O. OR NOT ALLOWED BY LOCAL JURISDICTION. SEE
C. PENETRATIONS IN ROOFING MEMBRANE AND FLASHING SHALL ONLY BE MADE AS 3 RESTROOM EXHAUST FAN. SEE 18/A6.0. 12/A6.0 FOR FLASHING ASSEMBLY.
NOTE: BASE FLASHING SYSTEM INDICATED ON THE DRAWINGS OR SPECS.
PRIMARY AND D. SEE SPECIFICATIONS FOR SEALANT SPECS. 4 CANOPY. SEE SCOPE OF WORK. 20 NO BUILD BOUNDARY FOR DRAIN.
OVERFLOW E. ALL SHEET MTL FLASHING SHALL BE 22 GA MIN.
SCUPPER OPENINGS 5 ROOF HATCH: SEE 7/A6.0. 21 "DURO-LAST" SINGLE PLY ROOF MEMBRANE OVER 1/2" EXTERIOR GRADE PLYWOOD
TO BE SIZED PER 22 GA. G.I. SCUPPER FLASHING- SET PRIMED MISCELLANEOUS: OVER TRUSSES. INSTALL PER MANUFACTURERS SPECIFICATIONS.
NOTE: ALL A. ROOF PENETRATIONS CLOSER THAN 12" FROM ANOTHER WILL NOT BE ALLOWED. 6 GREEN
U.P.C. APPENDIX D FLANGES INTO ROOF CEMENT OVER FIELD ICE MACHINE CONDENSERS.
PLIES AND NAIL FLANGES TO ALL SEAMS @ B. EXHAUST FANS MIN. 10'-0" AWAY FROM ALL AIR INTAKE / SUPPLY. 22 POWER / GAS / CONDENSATE ENTRY UNDER HVAC UNIT (PER HVAC MFR. SPECS.)
AND LOCAL CODE ELASTOMERIC REFER TO MECH. AND PLUMB DWGS. UTILITY ACCESS FROM WITHIN CURB - NO ROOF
FLASHING TO C. LOCATE WALK-IN CONDENSERS ON ROOF ONLY IF REQUIRED BY CODE. 7 WALK-IN COOLER / FREEZER CONDENSERS. SEE SCOPE OF WORK SHEET.
REQUIREMENTS SEALANT ON
ALL SIDES
SUBSTRATE SURFACES USING
APPROPRIATE FASTENERS BE SOLDERED
8 EQUIPMENT PLATFORM. SEE DETAIL 15/A6.0.
PENETRATIONS. DO NOT RUN ON ROOF SURFACE. SEE 13/P6.0.
LIVE MAS
SEAL CUT EDGES AT SCUPPER OPENING 23 24x36 WALK MATS. SEE ROOF SPECS. MEDIUM54
USING WOVEN GLASS FABRIC EMBEDDED OVERFLOW SCUPPER 9 PIPE HOOD FOR UTILITIES. SEE DETAIL 9/A6.0.
24 MAINTAIN MFR'S ROOFTOP UNIT MAINTAINANCE CLEARANCE.
22 GA. G.I. INTO AND COVERED WITH FLASHING CEMENT
CONDUCTOR 10 24" x 24" HINGED LOUVER. SEE DETAIL 8/A6.0. 25 OUTSIDE AIR INTAKE FOR ROOFTOP UNIT. MAINTAIN MIN 10'-0" SEPARATION FROM
HEAD PLUMBING VENTS, FLUES AND BUILDING EXHAUST.
ROOFING SYSTEM 11 SCUPPER AND DOWNSPOUT. SEE DETAIL F.
26 NOT USED.
12 ALUMINUM SLAT WALL BY VENDOR. SEE SCOPE OF WORK.
4" 2" 2" 27 NOT USED.
GREEN 13 ALUMINUM VALANCE. SEE SCOPE OF WORK..
28 WATER HEATER INTAKE. SEE DETAIL 13/A6.0 FOR BRACING. ROOF PLAN
NOTE: ALL 14 CHANGE IN PARAPET ELEVATION SEE DETAIL 14/A6.2.
SEAMS @ 29 WATER HEATER EXHAUST FLUE SHALL BE MIN. 6" HIGHER THAN INTAKE-MAINTAIN MIN.
CAP SHEET 15 ROOF CRICKET. SEE DETAIL 16/A6.0. 10'-0" FROM NEAREST POINT OF RTU INTAKE. SEE DETAIL 13/A6.0 FOR BRACING.
A3.0
FLASHING TO
FLASHING SHEET BE SOLDERED
16 NOT USED. 30 PAINTED METAL PARAPET CAP. SEE DETAIL 2 & 5/A6.0
DESIGN AND SIZE PER LOCAL REQUIREMENTS
17 NOT USED.
PLOT DATE:
SCUPPER FLASHING F ROOF PLAN NOTES E KEY NOTES B
D D D D
SIM.
C A B D D
A5.0 A5.1 A5.1 A5.1 A5.2
SIM.
24 (BEHIND SLATS)
G
2" E.I.F.S. TO END AT
START OF SLAT WALL.
(BEYOND)
19
A6.2
22
4 V-XX1 14'-1"
CL OF SIGN
1'-0"
4 7 12'-9" 3"
5" 4'-14
1'-221"
CL TYP.
9'-0" 9'-0"
BOTTOM OF VALANCE EIFS THICKNESS
1 TRANSITION
10
V-349
11'-821"
14
21 1 D
14
5'-10"
6 CONSULTANT'S
TYP. SEAL
20
C 3 21 2'-8" 2'-8" 2'-8" 21
RIGHT SIDE ELEVATION 1/4"=1'-0" A
MISCELLANEOUS V-XXX QTY ITEM DESCRIPTION ELEC BASE THICKNESS - 1" THICK E.I.F.S.
PARAPET CAP 3 A
PARAPET CAP 5 A. SEE SHT A1.1 "WINDOW TYPES" FOR WINDOW ELEVATIONS.
B. SEE SCOPE OF WORK FOR RESPONSIBILITIES. V-350 1 TACO BELL DRIVE THRU CANOPY X B BASE THICKNESS - 2" THICK E.I.F.S. GREEN
C. "HIGH IMPACT" MESH SHALL BE USED WHERE NOTED C D V-348 1 TACO BELL "BUILDING ACCENT" SHADING & LED X
1" EIFS LEDGE D. THE PAINT COLORS SHOWN ARE COLOR REFERENCES FOR THE E.I.F.S. SUPPLIER E V-364 1 SLAT WALL SYSTEM GREEN
LAMPING. C BASE THICKNESS -1" THICK E.I.F.S. WITH HIGH IMPACT MESH (ONLY WHERE NOTED).
E. E.I.F.S. TEXTURE SHALL BE 'FINE'. SEE DETAIL 2/A6.2.
SLAT WALL D BASE THICKNESS -2" THICK E.I.F.S. WITH HIGH IMPACT MESH (ONLY WHERE NOTED).
BY VENDOR SEE DETAIL 2/A6.2.
17'-5" SEALERS (REFER TO SPECS): D MISC.CHANGES 10.25.13
GREEN
1" EIFS EIFS LEDGE A. SEALANT AT ALL WALL AND ROOF PENETRATIONS.
E PROTOTYPE UPDATES 12.9.13
B. SEALANT AT ALL WINDOW AND DOOR FRAMES AT HEAD AND JAMB. DO NOT SEAL SILL @
MAIN BUILDING WALL
WINDOWS. G PROTOTYPE UPDATES 1.30.14
ALUMINUM VALANCE C. APPLY NEOPRENE GASKET (CONT.) BETWEEN BUILDING & CANOPY/TRELLIS.
BY VENDOR V-363
2" THICK EIFS LEGEND:
E.I.F.S. THICKNESS N.T.S. B
ACCENT BAND
A. VENDOR SCOPE INCLUDES SUPPLY AND INSTALLATION OF AWNINGS,
9'-0" CANOPIES, AND SIGNAGE. SWINGING BELL & LETTERS NOT HATCHED
9'-0" EIFS THICKNESS BUT INCLUDED.
BOTTOM OF VALANCE 1 TRANSITION V-XXX QTY ITEM DESCRIPTION ELEC
B. DENOTES 2" THICK EIFS
1" EIFS
1" HIGH IMPACT EIFS CONTRACT DATE: XX.XX.XX
MAIN BUILDING WALL V-349 3 TACO BELL LETTERS 12" HIGH, WHITE, FLAT FACED X
VARIES MAIN BUILDING WALL 3 C BUILDING TYPE: LIVE MAS MEDIUM54
V-322 3 TACO BELL 'BELL' SIGN 4'-10 1/2"W x 4'-6 1/4"H X
"CRITICAL" DIMENSIONS: LED PLAN VERSION: March 2013
A. REQUIRED CLEAR OPENING WIDTH TO ENSURE COORDINATION WITH STANDARD GREEN
LAMPING.
SITE NUMBER: XXX-XXX
SIGNAGE/ BUILDING ELEMENTS DIMENSIONS.
* REQUIRES ELECTRICAL CONNECTION. SEE ELECTRICAL PLANS.
STORE NUMBER: XXXXX
SLAT WALL COLOR TRANSITION N.T.S. I EIFS THICKNESS COLOR TRANSITION N.T.S. G GENERAL NOTES F CANOPY AND BLDG. ACCENT SCHED. N.T.S. E SIGN SCHEDULE N.T.S. C
TACO BELL
1 BUILDING SIGN, SEE SCOPE OF WORK.
15 GAS SERVICE. 123 MAIN STREET
2 DRIVE THRU WINDOW. SEE SHEET A1.0 AND A1.1.
16 WALL SHALL BE FINISHED PRIOR TO INSTALLATION OF SWITCHGEAR. ANYTOWN, USA 98765
SYMBOL AREA MANUFACTURER COLOR ALTERNATE MFR. ALTERNATE COLOR CONTACT INFORMATION 3 ROOF BEYOND.
17 SCUPPER, COLLECTOR, AND VERTICAL DOWNSPOUT 6" MIN.
LOTUSAN NA08-0011 SHERWIN WILLIAMS: BRAD HARRINGTON, 216-341-5558 X115 (PHONE), PAINT TO MATCH ADJACENT WALL.
1 MAIN BUILDING COLOR SHERWIN WILLIAMS SW 6122 "CAMEL BACK" 4 STOREFRONT TYPICAL.
[email protected]
18 OVERFLOW SCUPPER.
2 WALL COLOR BEHIND SCREEN WALL SHERWIN WILLIAMS SW 6831 "CLEMATIS" 5 DOUBLE DOOR.
EIFS CONTACT:
19 RTU BEYOND. PAINT TO MATCH MAIN BUILDING COLOR.
STO CORP.: TIM SALERNO, 800-628-2738 X6502 (PHONE), 321-978-0267 (FAX), [email protected] 6 SWITCH GEAR. PAINT TO MATCH WALL.
3 ACCENT COLOR SHERWIN WILLIAMS SW 2823 "ROOKWOOD CLAY" LOTUSAN NA08-0010
OWNER REPRESENTATIVE WILL IDENTIFY IF LOTUSAN PAINT WILL BE USED. 20 BREAK METAL COVER OVER WOOD STUDS TO MATCH STOREFRONT. SEE 3,4 & 7/A6.1
4 SLAT WALL AND VALANCE COLOR VENDOR SW 7034 "STATUS BRONZE" (EQUAL)
7 ARCHITECTURAL ALUMINUM VALANCE BY VENDOR.
LIGHT SCONCE. ALIGN BOTTOM OF FIXTURE'S MOUNTING BRACKET WITH
21 HIGH IMPACT E.I.F.S. WHERE SHOWN ON ELEVATIONS. SEE 2/6.2. LIVE MAS
8 22 ALUMINUM SLAT WALL BY VENDOR. MEDIUM54
5 PARAPET CAP COLOR 27 DUROLAST MEDIUM BRONZE (FACTORY FINISH) SHERWIN WILLIAMS SW 7069 "IRON ORE" DURO-LAST: LEE COBB, 800-434-3876 (PHONE) CHANGE IN EIFS THICKNESS (CENTER OF BRACKET AT 9'-2").
VERSETTA STONE WALL: GENE GUETZOW, 262-215-8373 (PHONE) 23 BOLLARD
OWENS CORNING IDAHO DRY STACK,
6 STONE WALL BORAL - VERSA STONE TIGHT CUT - " PLUM CREEK"
CARMEL MOUNTAIN
9 ASSUME D/T LANE SURFACE IS 6" BELOW THE FINISH FLOOR.
REFER TO GRADING & SITE PLAN. 24 DUROLAST SINGLE MEMBRANE ROOFING OR EQUAL. EXTERIOR
CULTURED STONE ALTERNATE:
VENEER OWENS CORNING: KATHY MANNON, 866-315-5081 (PHONE), [email protected] 10 2" EIFS TO TERMINATE AT TOP OF WINDOW HEIGHT. PROVIDE 1" EIFS ABOVE
THAT POINT. SLOPE TRANSITION AWAY FROM BUILDING 1:12.
25 IF THE DURO LAST PARAPET CAP TRIM IS USED IT SHALL NOT BE PAINTED.
ELEVATIONS
7 STOREFRONT WINDOWS TBD " DARK BRONZE" 26 RETURN ALUMINUM LOUVERS BACK TO FACE OF BUILDING.
11 EIFS (TYP). SEE 2 & 4/A6.2.
8 PIPE BOLLARDS STREET SMART YELLOW - 1/4" THCIK PLASTIC COVER (US.POSTMAN.COM) OR EQUAL
12 PARAPET COPING. IF DURO-LAST EDGE TRIM IS USED. USE THE DURO-LAST
9 DURO-LAST: LEE COBB, 800-434-3876 (PHONE)
A4.0
PARAPET BACK ROOFING DUROLAST THE COLOR SHALL BE FACTORY COLORED "TAN." EQUAL ALTERNATE ALLOWED. PRE-FINISHED EDGE TRIM. SEE DETAIL 2/A6.0.
13 CO2 FILLER VALVE & COVER. SEE DETAIL 5/A6.2 SIM.
14 EIFS REVEAL JOINT.
PLOT DATE:
EXTERIOR FINISH SCHEDULE H KEY NOTES D
D D D
D D A D A
A5.2 A5.0 A5.1 A5.0 A5.0
SIM.
SIM.
19 19
CL
D
1
EQ. EQ. EQ. EQ. EQ. EQ. V-349
3
1'-0"
12'-9" 4'-7"
11 1 B
17
8 8 8 8
17
TYP. TYP.
1'-0"
TRANSITION
13'-1041"
V-350
5'-0"
21
21 1 D 1 D C 21 1 D
3'-0"
16
20 20
CONSULTANT'S
3 21
SEAL
3'-721" 2'-421" 2'-721" 2'-421"
C
2'-8" 2'-8" 2'-8" 10'-9" 2'-8" 2'-8" 2'-8" 10'-9"
14 14
RIGHT SIDE ELEVATION 1/4"=1'-0" A
D MISC.CHANGES 10.25.13
G PROTOTYPE UPDATES 1.30.14
SIM.
(BEHIND SLATS)
CL
CONTRACT DATE: XX.XX.XX
EQ. EQ. 3 20'-121"
4" BUILDING TYPE: LIVE MAS MEDIUM54
(BEYOND)
PLAN VERSION: March 2013
2'-921"
D
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
CL
1'-0"
521"
TACO BELL
12'-9"
5" 123 MAIN STREET
ANYTOWN, USA 98765
14'-2"
13'-7"
LIVE MAS
MEDIUM54
EXTERIOR
ELEVATIONS
A4.1
FRONT ELEVATION 1/4" = 1'-0" C REAR ELEVATION 1/4" = 1'-0" B PLOT DATE:
24 GA. METAL COPING.
EL. 22'-1"
TOP OF STONE TOWER
24 GA. METAL COPING. 24 GA. METAL COPING.
2
A6.0
2
A6.0
GREEN GREEN
2
24 GA. METAL COPING. BLOCKING LED LIGHT LED LIGHT
SEE ELECTRICAL PLANS A6.0 SEE ELECTRICAL PLANS
EL. 18'-10"
PARAPET CAP
PLYWOOD SEE
4'-721"
1" THICK EIFS OVER MOISTURE STRUCTURAL
BARRIER OVER PLYWD
SHEATHING GREEN
EL. 17'-5" LED LIGHT DURA-LAST ROOFING BORAL
E.I.F.S. BAND ELEVATION - HIGH SEE ELECTRICAL PLANS MEMBRANE VERSA STONE
GREEN
GREEN
PANEL WALL SYSTEM
LED LIGHT
DURA-LAST ROOFING SEE ELECTRICAL PLANS DURA-LAST ROOFING
MEMBRANE OVER GREEN MEMBRANE OVER
GRADE PLYWD DURO-LAST SINGLE PLY 1/2" EXTERIOR
BLOCKING
2x6 STUDS ROOFING MEMBRANE 2x6 STUDS GRADE PLYWD
SLAT WALL BY OVER RIGID INSULATION
VENDOR SLAT WALL BY
BOARD OVER 5/8" EXT.
VENDOR
CONSULTANT'S
GREEN GRADE PLYWOOD.
2" THICK EIFS OVER MOISTURE DURO-LAST SINGLE PLY
SEAL
BARRIER OVER PLYWD ROOFING MEMBRANE 1" THICK EIFS OVER MOISTURE 1" THICK EIFS OVER MOISTURE
SHEATHING BARRIER OVER PLYWD BARRIER OVER PLYWD DURO-LAST SINGLE PLY
OVER RIGID INSULATION
SHEATHING (BEHIND SLATWALL SHEATHING (BEHIND SLATWALL ROOFING MEMBRANE
BOARD OVER 5/8" EXT.
AND VALANCE) AND VALANCE) OVER RIGID INSULATION
GRADE PLYWOOD.
GREEN
BOARD OVER 5/8" EXT.
3'-1121"
GRADE PLYWOOD.
GREEN
D SIGN WHERE OCCURS.
20 SIGN WHERE OCCURS.
D SEE ELEVATIONS
A6.0 SEE ELEVATIONS GREEN
EL. 12'-5"
LED LIGHT ROOF TRUSS LED LIGHT
TURN BUCKLE CENTER SEE ELECTRICAL PLANS
FIBERGLASS BATT SEE ELECTRICAL PLANS REFER TO
BLOCKING FOR CANOPY
TURNBUCKLE BY SIGN VENDOR INSULATION STRUCT. DWGS.
SEE STRUCTURE
SEE SCOPE OF WORK EL. 11'-7 1/2" FOR SIZES,
421"
BLOCKING TOP OF VALANCE LOCATIONS
HANGER ROD (SEE SCOPE OF WORK)
D
AND PROFILES
EL. 9'-0" FIBERGLASS BATT
E.I.F.S. BAND ELEVATION - LOW INSULATION EL. 10'-8"
TRUSS BEARING HEIGHT
2'-021"
BLOCKING FOR CANOPY D MISC.CHANGES 10.25.13
SEE STRUCTURE
G PROTOTYPE UPDATES 1.31.14
EL. 9'-4" EL. 9'-4" EL. 9'-4"
CEILING CEILING CEILING
EL. 9'-0" EL. 9'-0"
BOTTOM OF VALANCE BOTTOM OF VALANCE
G AND CHANGE IN EIFS
EL. 9'-0' SIM. D
EL. 8'-10" THICKNESS
GREEN
CANOPY CLEARANCE CEILING
( MIN. 9'-6" ABOVE DRIVE OR AS INDICATED
GREEN GREEN
THRU LANE) ON RCP
EL. 8'-0" REFER TO
WINDOW HEAD STRUCT. DWGS.
FIBERGLASS BATT CONTRACT DATE: XX.XX.XX
FOR
1 INSULATION
HEADER SIZES BUILDING TYPE: LIVE MAS MEDIUM54
A6.1
PLAN VERSION: March 2013
2x6 STUDS
5 FIBERGLASS BATT SITE NUMBER: XXX-XXX
INSULATION
A6.1 STORE NUMBER: XXXXX
2" THICK EIFS OVER MOISTURE 2x4 STUDS
DRIVE-THRU WINDOW STOREFRONT WINDOW SYSTEM BARRIER OVER PLYWD
SHEATHING BORAL VERSETTA
PASS-THRU UNIT. SEE SCOPE
OF WORK. PANEL WALL SYSTEM TACO BELL
9'-421"
GREEN
123 MAIN STREET
ANYTOWN, USA 98765
6
A6.1
2
EL. 3'-0" A6.1 1/2" GYP. BOARD
DRIVE THRU WDW. R.O.
FRP OVER 1/2"
PLYWOOD
LIVE MAS
MEDIUM54
1" THICK EIFS OVER MOISTURE
BARRIER OVER PLYWD SCHEDULED
SHEATHING 1/2" GYP. BOARD EL. 1'-6" WAINSCOT 4
WINDOW SILL R.O. 16
A6.2
SCHEDULED 1" THICK EIFS OVER MOISTURE
4
A6.4
A6.3 WALL
SILL GASKET - TYP. D SILL GASKET - TYP. SILL GASKET - TYP.
D WAINSCOT BARRIER OVER PLYWD
SHEATHING
D D
SECTIONS
SILL GASKET - TYP.
EL. 0'-0" EL. 0'-0" EL. 0'-0" EL. 0'-0"
T.O. SLAB T.O. SLAB T.O. SLAB T.O. SLAB
A5.0
SEE STRUCT. DWGS. 20 4 SEE STRUCT. DWGS. SEE STRUCT. DWGS.
FOR FOUNDATION A6.3 A6.2 FOR FOUNDATION FOR FOUNDATION
AND SLAB DETAILS AND SLAB DETAILS AND SLAB DETAILS
PLOT DATE:
WALL SECTION AT DRIVE THRU 3/4" = 1'-0" D WALL SECTION AT DINING - ENTRY SIDE 3/4" = 1'-0" C WALL SECTION AT DINING TYP. 3/4" = 1'-0" B SECTION AT DINING - DRIVE THRU SIDE TOWER 3/4" = 1'-0" A
2 2 2 2
A6.0 SIM. A6.0 A6.0 A6.0
24 GA. METAL COPING.
FIBER CANT
24 GA. METAL COPING.
EL. 19'-5" FIBER CANT
PARAPET CAP 24 GA. METAL COPING.
EL. 18'-10" EL. 18'-10" FIBER CANT EL. 18'-10"
PARAPET CAP PARAPET CAP PARAPET CAP
1" - E.I.F.S. 1" - E.I.F.S.
1" - E.I.F.S.
DURA-LAST ROOFING EL. 17'-5" EL. 17'-5" DURA-LAST ROOFING EL. 17'-5"
MEMBRANE OVER 1/2" E.I.F.S. BAND ELEVATION - HIGH E.I.F.S. BAND ELEVATION - HIGH MEMBRANE OVER 1/2" E.I.F.S. BAND ELEVATION - HIGH
EXTERIOR GRADE PLYWD EXTERIOR GRADE PLYWD
DURA-LAST ROOFING
MEMBRANE OVER 1/2"
DURO-LAST SINGLE PLY DURO-LAST SINGLE PLY EXTERIOR GRADE PLYWD DURO-LAST SINGLE PLY
ROOFING MEMBRANE ROOFING MEMBRANE ROOFING MEMBRANE
OVER RIGID INSULATION OVER RIGID INSULATION OVER RIGID INSULATION
BOARD OVER 5/8" EXT. BOARD OVER 5/8" EXT. BOARD OVER 5/8" EXT.
GRADE PLYWOOD. GRADE PLYWOOD. GRADE PLYWOOD.
CONSULTANT'S
SEAL
2" - E.I.F.S. DURO-LAST SINGLE PLY
ROOFING MEMBRANE
OVER RIGID INSULATION
2" - E.I.F.S. BOARD OVER 5/8" EXT.
GRADE PLYWOOD.
2X6 STUDS
2" - E.I.F.S.
(2) 2x6 CONT. TOP PLATES (2) 2x6 CONT. TOP PLATES (2) 2x6 CONT. TOP PLATES
EL. 10'-8" EL. 10'-8" EL. 10'-8"
D MISC.CHANGES 10.25.13
TRUSS BEARING HEIGHT TRUSS BEARING HEIGHT TRUSS BEARING HEIGHT
FIBERGLASS BATT
INSULATION
VARIES
SUSPENDED CEILING
EL. 9'-0' EL. 9'-0"
E.I.F.S. BAND ELEVATION - LOW E.I.F.S. BAND ELEVATION - LOW
FIBERGLASS BATT FIBERGLASS BATT
2x6 STUDS INSULATION
INSULATION BLOCKING @
CEILING - TYP.
1" - E.I.F.S. 1" - E.I.F.S.
2x6 STUDS
FIBERGLASS BATT
INSULATION
CONTRACT DATE: XX.XX.XX
2x6 STUDS
BUILDING TYPE: LIVE MAS MEDIUM54
1" - E.I.F.S.
9 PLAN VERSION: March 2013
2x6 STUDS A6.1 SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
SECURITY DOOR SEE SHEET A2.0. TACO BELL
123 MAIN STREET
4 ANYTOWN, USA 98765
A6.2
20 16
SIM. 20 KITCHEN
A6.3 A6.3
A6.3 SIDE
10
16 DINING ROOM
A6.1
A6.3 SIDE
LIVE MAS
MEDIUM54
WALL
SILL GASKET - TYP. SILL GASKET - TYP. SILL GASKET - TYP.
D D D
SECTIONS
EL. 0'-0" EL. 0'-0" EL. 0'-0" EL. 0'-0"
T.O. SLAB T.O. SLAB T.O. SLAB T.O. SLAB
A5.1
PLOT DATE:
WALL SECTION AT REAR TOWER 3/4" = 1'-0" D WALL SECTION AT SERVICE DOOR 3/4" = 1'-0" C WALL SECTION AT THICK E.I.F.S. 3/4" = 1'-0" B TYPICAL WALL SECTION 3/4" = 1'-0" A
24 GA. METAL COPING.
FIBER CANT
SLOPE MIN
1/2" / FOOT
22'-1" G
T.O. DBL PLATE 2
EL. 21'-0"
A6.0
T.O. SLAT WALL
2
A6.0
2
A6.0 SIM.
24 GA. METAL COPING. LED LIGHT BLOCKING
GREEN SEE ELECTRICAL PLANS
FIBER CANT
EL. 18'-10"
DURA-LAST ROOFING REAR PARAPET
MEMBRANE OVER
PLYWOOD SEE
1/2" EXTERIOR
4'-721"
STRUCTURAL
GRADE PLYWD
DURA-LAST ROOFING
MEMBRANE OVER 1/2"
EXTERIOR GRADE PLYWD
BLOCKING
MTL. HINGED LED LIGHT
G LOUVER- SEE ARCH. GREEN SEE ELECTRICAL PLANS
DET. 8/A6.0 D
ROOF NOTCH (BEYOND) 2
2
A6.0 A6.0
DURO-LAST SINGLE PLY DURO-LAST SINGLE PLY
CONSULTANT'S
ROOFING MEMBRANE
OVER RIGID INSULATION 2 24 GA. METAL COPING.
SLAT WALL BY ROOFING MEMBRANE SEAL
VENDOR OVER RIGID INSULATION
BOARD OVER 5/8" EXT. A6.0 BOARD OVER 5/8" EXT.
GRADE PLYWOOD. FIBER CANT
GRADE PLYWOOD.
SIGN WHERE OCCURS.
EL. 13'-10" GREEN SEE ELEVATIONS
EL. 13'-10"
DURA-LAST ROOFING E.I.F.S. BAND ELEVATION - HIGH
PARAPET CAP
MEMBRANE OVER ROOF SLOPE: F
1/2" EXTERIOR 1/2 : 12 SLOPE
A3.0
5'-4"
GRADE PLYWD
EL. 12'-8"
CEILING FRAMING AT FREEZER FIBERGLASS BATT
INSULATION
LED LIGHT
SEE STRUCTURAL GREEN SEE ELECTRICAL PLANS BLOCKING
FOR DETAILS EL. 11'-7 1/2"
TOP OF VALANCE (2) 2x6 CONT. TOP PLATES
DURO-LAST SINGLE PLY
ROOFING MEMBRANE
OVER RIGID INSULATION 10'-8" 8 X 8 INTAKE AND EXHUAST
BOARD OVER 5/8" EXT. T.O. DBL PLATE AIR TRANSFER GRILLS OVER
GRADE PLYWOOD. COOLER WITH A MINUMUM
OF 4'-0" BETWEEN EACH
GRILL. REFER TO D MISC.CHANGES 10.25.13
MECHANICAL SHEETS.
EL. 9'-4" G PROTOTYPE UPDATES 1.30.14
BLOCKING AT EL. 9'-4"
CEILING REAR REFIGERATION CEILING
EL. 9'-0" EL. 9'-0"
EL. 9'-0'
THICK EIFS TRANSITION BOTTOM VALANCE
THICK EIFS TRANSITION FIBERGLASS BATT
INSULATION
EL. 8'-5/8" R.O. FRONT SCREEN WALL
CASED OPENING
FIBERGLASS BATT FIBERGLASS BATT
CONTRACT DATE: XX.XX.XX
INSULATION INSULATION
BUILDING TYPE: LIVE MAS MEDIUM54
2x6 STUDS PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
1 STORE NUMBER: XXXXX
2" GYP. BD
10'-421"
BORAL VERSETTA
PANEL WALL SYSTEM TACO BELL
C 123 MAIN STREET
ANYTOWN, USA 98765
2
A6.1
4
4 4
A6.2
A6.2 A6.2
7
7
A6.2
A6.2 LIVE MAS
MEDIUM54
C
EL. 1'-6"
WINDOW SILL R.O.
4
A6.4
WALL
SILL GASKET - TYP.
SILL GASKET - TYP. SECTIONS
EL. 0'-0" EL. 0'-0" EL. 0'-0"
EL. 0'-0" T.O. SLAB T.O. SLAB T.O. SLAB
T.O. SLAB
A5.2
PLOT DATE:
WALL SECTION AT COOLER 3/4" = 1'-0" D FRONT TOWER SECTION C REAR WALL SECTION AT COOLER 3/4" = 1'-0" B FRONT WALL SECTION 3/4" = 1'-0" A
D
24 GA. G.I. COVER PLATE 6 3
6" DIA. WHITE 40 SET INTO SEALANT BEAD
SCHEDULE PV PIPE. 2-90 APPLIED ALONG BOTH 5
BUILDING PARAPET SIDES OF JOINT - SECURE
LOG TO NG -
MEMBRANE ROOF DEGREE PLUS VERTICAL
THRU ROOF USING SCREW THRU
PROJECTS.
FLASHING BOOT 4
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
STEEL/NEOPRENE WASHER
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
2x2x1/8" ANGLE - LAG BOLT TO CENTERED OVER 1/4" GAP
FOR THIS BUILDING TYPE. THESE
EXT. CLOSED CELL
PARAPET @ BLK'G & CUT & BEND @ BETWEEN ADJACENT
O
ROOFING INSULATION FOAM
R ELEMENTS
MEMBRANE TO SEAL PIPE SECTIONS OF NEW
T'S PRIOR
COPING. D
R PSITE-SPECIFIC
UTILITY LINES FOR 1
PIPE CLAMP-BOLT TO ANGLE, TYP. RIGID INSUL BD. ROOF TOP 4"
SCREW THRU
REGIONAL ARCHITECTURAL PARTNER (RAP)
OF 2 EQUIPMENT NEOPRENE WASHER @
IMAGE
D 2
30" O.C. @ INSIDE
RIO
KITCHEN OPERATIONS MUST BE APPROVED
ROOF PLYWOOD
HOT WATER INTAKE OR EXHAUST FASTEN PVC TUBE FACE ONLY
CONSTRUCTION.
FLUE TO TRUSE BELOW
L
EXTEND PVC PIPE
NSTHE
ROOF DECK WITH SECURE OUTSIDE
ITH MEFOR
U
A MIN. OF 24"
NOTE:
GALV. STEEL BELOW PLYWD. FACE OF METAL
MODIFICATIONS THAT CHANGE
U-CLAMP ROOF DECK SECTIONS USING TWO
SEE ALSO 2/P6.0
JURISDICTIONAL REQUIREMENTS
NAILS THRU SLOTTED
O
CE WENGINEER
WOOD TRUSS CHORD COUNTER FLASH @ 9
I
HOLES UNDER COVER
C
14" MIN. (TYP) EXTERIOR FACE 7
WOOD TRUSS WEB
PLATE 8
THITEMPLATE
(TYP) D D
CONTACT LEE COBB WITH
MUST BEIS
24 GA. G.I. CAP NOTE: JOINTS ARE TO OCCUR AT 10'-0" MAX. 9 DUR0-LAST AT 800-434-3876
D
FLASHING FOR ROOF MEMBRANE
ARCHITECT AND/OR
QUESTIONS.
S
NOTES
DOCUMENT
NOT USED 17 W.H. FLU / INTAKE PIPE SUPPORT 13 PIPE HOOD 9 COPING JOINT 5
PLA
N.T.S. N.T.S. N.T.S.
1 PROVIDE A WOOD NAILER TO MATCH THE THICKNESS OF THE WALL
DRAWINGS
FINISH. APRROX. 1" THICK IS TYPICAL BUT MAY VARY. TOP OF WOOD
THESE
NAILER SHALL BE FLUSH WITH TOP OF WALL FINISH. THE WOOD NAILER
E
STANDARD CURB BASE, HVAC UNIT
SHALL EXTEND AT LEAST 1/2" INCH BEYOND THE LOWER HORIZONTAL
R
FASTEN PER MFR'S UNIT COUNTERFLASHING W/ EDGE OF THE PARAPET COPING TO ALLOW FOR PROPER FASTENING.
REM
RECOMMENDATIONS NEOPRENE PERIMETER GASKET
2 FASTENERS USED TO ATTACH THE COPING TO WOOD NAILERS, MUST BE
ELECTRICAL CONDUIT SPACED NO GREATER THAN 18 - INCHES ON-CENTER.
1" HEAD NAILS AT 6" O.C. OUTSIDE HANDLE
T.O. CURB TO T.O. ROOF
GALVANIZED NAILS @ REINFORCING 3 ALLOW FOR 1/8 - INCH EXPANSION GAP BETWEEN 10-FOOT LENGTHS OF
VINYL GRIP
6" O.C. CHANNEL COPING. PROVIDE A COPING JOINT COVERS BETWEEN ENDS OF COPING
KNOCK-DOWN FLAT METAL CURB - OUTSIDE PADLOCK
COVER (TYPICAL) 1" FIBERGLASS EXTRUDED PIECES AND AT CORNERS. JOINT COVERS SHOULD BE MADE FROM THE
SEE SCOPE OF WORK PROVISION INSULATION RUBBER GASKET SAME MATERIAL AS THE COPING AND SHOULD LAP THE JOINTS A
8" MIN.
SCREW THRU NEOPRENE
2-1/4"
WASHER , 3 PER SIDE MINIMUM OF 6" ON EITHER SIDE. JOINT COVERS SHALL BE FASTENED
5/8" PLYWOOD SECURED TO CURB
1'-2"
THE SAME WAY AS THE COPING.
CURB FLASHING COVER LINER HEAVY DUTY HINGE
PREFABRICATED CUSTOM 4 FIBER CANT STRIP SLOPED 1/4:12 TOWARDS ROOF..
CURB FLASHING
TAPERED SLEEPER TO LEVEL CURB
5 ROOF MEMBRANE
ROOFING MATERIAL OVER RIGID ONE POINT FRAME COVER w/
(2) TAPERED 2x12 WD
CURB OVER 2x INSULATION LOCKING UNIT 3/8" PIVOT PIN
6
D
FACTORY PAINTED 24 GAUGE METAL COPING WITH 4" DROP FRONT,
CONSULTANT'S
SEAL
12"
SECURED TO DECK BACK AND ENDS (WHERE SHOWN).
INSIDE PADLOCK
8" MIN.
1" RIGID FIBER PROVISION HOLD OPEN
ROOFING MATERIAL 7 WALL FINISH: TYPICALLY 1" THK EIFS OR 7/8" THK STUCCO
INSULATION ARM VINYL
7-1/2"
NOTE: STRAPPED TO GRIP 8
FRAME CURB DOUBLE 2X TOP PLATE
RTU SHALL BE LEVEL CURB PRESSURE
NOTE:
WITHIN 1/8" OVER LENGTH SECTION A-A INTENSIFIER
9 PLYWOOD SUBSTRATE. SEE SHEET A1.0 & S2.0 FOR ADDITIONAL
OF EQUIPMENT DETAILS
EXHAUST FAN SHALL
BE LEVEL WITHIN 1/8" 4" CLEAR OPENING 30" 36" 4"
OVER WIDTH OF
SCHEDULE ROOF DECK and CURB SCHEDULE ROOF DECK and
ROOF OPENING SUPPORT ROOF OPENING SUPPORT
EXHAUST FAN CURB 1-1/2" = 1'-0" 18 HVAC CURB 3"=1'-0" 14 CLEAR OPENING PARAPET CAP N.T.S. 2
HATCH MATERIAL:
MIN. 24 GA. G.I. CAP FLASHING GALVANIZED STEEL (PRIME PAINTED)
KITCHEN HOOD EXHAUST FAN
SECURE W/ SCREW THRU 5/8" CDX PLYWOOD COVER - 14 GA. GALV STEEL
HEAVY DUTY FRAME COVER - 14 GA. GALV STEEL D
HINGED BASE FOR SERVICING/ STEEL/EPDM WASHER AS NEEDED CAP SHEET OVER TOP OF HINGE FRAME CURB - 14 GA. GALV STEEL
CLEANING. FOR PROPER SECUREMENT SLEEPER EXTEND DOWN
(4 SIDES) HOLD OPEN COVER LINER - 22 GA. GALV STEEL
SIDES BY 2" ARM
SEAL WITH APPROVED MATERIAL
2x6 @ 16"O.C.
ONE POINT
PRESSURE
INTENSIFIER
HATCH FINISH:
PRE-FABRICATED VENTILATED CURB
40" MIN.
LOCKING UNIT GALV - PRIME PAINTED C MISC. CHANGES 9.06.13
EXTENSION
4'-6" LENGTH OR LESS D MISC.CHANGES 10.25.13
NEMA 3R FUSED DISCONNECT, (2)2x12, RIP FOR LEVEL
A ONE POINT LATCH A
MOUNT TO HINGED BASE, SEE ELEC. GREATER THAN 4'-6" MANUFACTURER:
8" MIN.
PLATFORM
TWO POINT LATCH PRECISION LADDERS, LLC OR EQUAL
BASE FLASHING
SHEET METAL COUNTER FLASHING-
WRAPS TOP & OUTSIDE OF CURB, ROOFING MATERIAL
EXTENDING OVER BASE FLASHING
PREFABRICATED GALV. STEEL CURB
W/ INSULATION
NOTE:
SCHEDULE ROOF DECK and NOTES:
EXHAUST FAN SHALL BE
LEVEL WITHIN 1/8" OVER ROOF OPENING SUPPORT (1) ALL MOUNTING HARDWARE TO BE SUPPLIED BY OTHERS. CONTRACT DATE: XX.XX.XX
WIDTH OF CURB
(2) FOR OPERATING EFFICIENCY, HATCH HARDWARE VARIES BY SIZE. BUILDING TYPE: LIVE MAS MEDIUM54
SCHEDULE ROOF NOTE:
DECK and ROOF SET SUPPORTS ON SOLID NON-RIBBED EXAMPLE MODEL#: PH- A/G OPENING SIZE IN FEET-INCHES (PH-G2630) PLAN VERSION: March 2013
DUCT WRAP - SEE MECHANICAL NEOPRENE, AND SECURE LAG BOLTS
OPENING SITE NUMBER: XXX-XXX
SUPPORT THROUGH STEEL/NEOPRENE WASHER
MIN. 16 GA. WELDED DUCT
STORE NUMBER: XXXXX
EXHAUST FAN CURB N.T.S. 19 SLEEPER SUPPORT 1-1/2"=1'-0" 15 ROOF LADDER AND HATCH 1"=1'-0" 7
DURO-LAST SINGLE TACO BELL
D
PLY ROOF MEMBRANE
1/2" PLYWOOD SHEATHING DURO-LAST 123 MAIN STREET
E.I.F.S. BUILT-UP RIGID INSUL TYPICAL VENT PIPE TERMINATION BAR ANYTOWN, USA 98765
CRICKET OVER ROOFING 2x WOOD FRAMING
RIGID INSULATION OVER S.S. BAND POSITIONED
SIMPSON A34 2x FRAMING GALV. MTL. DRIP
FRAMING ANCHOR 1/4" FROM TOP OF
STACK FLASHING FLASHING
BOLTS (SEE (TOTAL OF 4)
SCOPE OF
WORK) DURO-LAST
3 - 2x10 BLOCKING
PRE-FABRICATED VENT
8" MIN.
NOTE: THIS DTL IS
STACK FLASHING
LIVE MAS
DURO-LAST ROOFING MEDIUM54
SIMILAR TO THE STRUC. MATERIAL OVER RIGID
DTLS. ANGLE BRACE INSULATION
MUST BE ACCESSIBLE TO
ATTIC SPACE
CANOPY (SEE
24"H X 24"W GALV. MTL.
HINGED LOUVER - PRIMED &
DETAILS
SCOPE OF WORK) D
(2) - 2x6 STUDS
EACH SIDE OF SCHEDULE ROOF
PAINTED IN FIELD
RUSKIN MFR. OR EQUAL ROOF
BLOCKING W/ DECK and ROOF 2x SOLID BLOCKING
PIPE/SLEEVE 2- 12d NAILS INTO OPENING SUPPORT STACKED W/ DRILLED
A6.0
(SEE SCOPE OF EACH OF THE 2x10 HOLE FOR PIPE 1/2" PLYWOOD SHEATHING
WORK) BLOCKING MEMBERS PENETRATION
PLYWOOD ROOF DURO-LAST
SEALANT @ 2x WOOD FRAMING TERMINATION BAR
DIAPHRAGM
PENETRATION
PLOT DATE:
CANOPY BLOCKING DETAIL 3" = 1'-0" 20 CRICKET 3"=1'-0" 16 SEALED PIPE FLASHING 1 1/2"=1'-0" 12 LOUVER DETAIL N.T.S. 8 ROOF LADDER N.T.S. 4
5"
3"
PLYWOOD 2x FRAMING
SHEATHING
PLYWOOD SHEATHING
2ND SURFACE EXTERIOR
ANODIZED ALUMINUM WATER 1" DRAINABLE SUBSTRATE -
PLYWOOD E.I.F.S.
DOOR - SEE DOOR BUTYL FLASHING PROOFING DRAINABLE E.I.F.S. E.I.F.S. SEE
SHEATHING
SCHEDULE APPLIED OVER SHEET A1.0
TAPE AT TOP OF
BLDG PAPER STUDS & HEADER - SEE
PLYWD STRUCTURAL
PAINTABLE METAL FLASHING & DRAINAGE PER
BUTYL FLASHING E.I.F.S. REQUIREMENTS. HEADER -
PLASTIC FLASHING. 1/2" GYP. HEADER - SEE
CONCRETE SLAB TAPE APPLIED SEE
BOARD STRUCTURAL
PRIOR TO BLDG 3/8" SCHEDULE ALUM. FLASHING SAME FIN. AS STRUCTURAL
PAPER W/ 3" MIN. SPACER NO E.I.F.S. DRAIN FINISH WINDOW.
ADA COMPLIANT 3/ 8" SHIM, BACKER ROD,
FLAP SHIM SCREED STRIP, USE STOREFRONT
ALUMINUM THRESHOLD SEALANT & LAG BOLT
UNDER WRAP BACK PLATE
4" @ HEAD
2" @ JAMB
- SET IN SEALANT
TO SUPPORT
2" MAX. 3 SHIM
4"
2ND SURFACE SEALANT & R.O.
WATER BACKER ROD
3/8" BACKER ROD & 3 3 /8" SHIM
1
4"
PROOFING SILICONE
ANODIZED ALUMINUM
APPLIED OVER LAG BOLT
PRE-MOLDED WINDOW FRAME - SEE
STUDS & WINDOW SCHEDULE. ANODIZED ALUMINUM WINDOW & WASHER
EXPANSION JOINT PLYWD STAINLESS
ALIGN FRAME WITH FRAME - SEE WINDOW SCHEDULE.
STEEL
FACE OF SHEATHING ALIGN FRAME AS SHOWN
YAW826
SERVICE DOOR - SEE DOOR 3/8" SHIM, LAG BOLT &
SCHEDULE - ALIGN FRAME WASHER
NOTE: WOOD SILLS WOOD WITH FACE OF SHEATHING
& JAMBS SHALL BE FRAMING
STOREFRONT DOOR SILL 3"=1'-0" 17 PRESSURE HEAD / JAMB @ SERVICE DOOR 3"=1'-0" 9 WINDOW HEAD @ DRIVE THRU 3" = 1'-0" 5 TYPICAL WINDOW HEAD 3" = 1'-0" 1
TREATED PLYWOOD
WALL
ANODIZED ALUM. SHEATHING ANODIZED ALUMINUM
WINDOW FRAME WEEP WINDOW FRAME - SEE SILICONE
NOTE: ANODIZED ALUM. SEALANT OVER
WINDOW SCHEDULE.
HOLES WATER PROOFING ROUGH OPENING SEE FLOOR FINISH WINDOW FRAME - ALIGN ALIGN FRAME WITH LAG BOLT
PLAN FOR FLOOR FRAME WITH FACE OF
SILL RECEPTOR W/ OUTSIDE FACE OF
FINISHES OPAQUE PANEL FRAME
FASTENER AFTER FRAMING 2ND SURFACE WATER PROOFING PER EIFS MANUFACTURER. PLYWOOD
ADD FLASHING TAPE AROUND THE ROUGH OPENING FOR THE WINDOW AND ANODIZED ALUM. SILL LAG BOLT &
6"
1/4" SETTING BED DOOR OPENING MTL "Z" FLASHING W/ CAULK JOINT RECEPTOR. W/ WASHER
END DAM - NO WEEP HOLES
SERVICE DOOR - 20 GA. S.S. WALL GUARD - 3/8" PLASTIC
SIDEWALK SEALANT AT FLASHING BACKER ROD &
SEE DOOR TOP OF SILL JAMB TO 1" SHIM
TO ALLOW WEEPAGE CAULK
SCHEDULE AND JAMB - ATTACH W/ CONST.
WITHIN FRAME
EXTEND FACE OF ALUM SCOPE OF WORK ADHESIVE ANODIZED ALUM. SOLID
ANGLE FOR CAULK & FLASHING SURFACE
BACKER ROD FINISH FLOOR R.O. SILL
OVER CONCRETE
FLASHING CONSULTANT'S
2"
EXPANSION FILLER SLAB
3 END DAM @ TAPE OVER
4" ALIGN AS SHOWN WITH
EIFS DRAINAGE
EDGE OF SLAB CHANNELS SEE
WINDOW BOT. ADA COMPLIANT
1/2" PLYWOOD BLDG PAPER SEAL
TRACK
2" MAX.
DTL. 7/A6.2 ALUMINUM 1/2" G.W.B.
THRESHOLD - 1" DRAINABLE E.I.F.S.
795 DOW CORNING
SET IN SEALANT
1
SILICONE (OR EQ.)
OVER LAG BOLT/
WASHER THRU
NOTE: SEE DETAIL 16/A6.1 FOR ADDITIONAL INFORMATION REGARDING WATER BOT. TRACK (TYP) & 1" DRAINABLE
PROOFING AT AND NEAR WINDOWS / DOORS 2ND SURFACE AT END DAM PRE-MOLDED E.I.F.S.
WATER EXPANSION JOINT
PROOFING NOTE: SEE DETAIL 16/A6.1 FOR ADDITIONAL INFORMATION REGARDING WATER NOTE: SEE DETAIL 16/A6.1 FOR ADDITIONAL INFORMATION REGARDING WATER
APPLIED OVER PROOFING AT AND NEAR WINDOWS / DOORS PROOFING AT AND NEAR WINDOWS / DOORS
STUDS &
SILL @ FULL HEIGHT OPENINGS 3"=1'-0" 18 PLYWD THRESHOLD @ SERVICE DOOR 3"=1'-0" 10 WINDOW SILL @ DRIVE THRU 3"=1'-0" 6 TYPICAL WINDOW SILL 3"=1'-0" 2
20 GA. S.S. WALL GUARD - SUBSTRATE-
TOP OF SILL TO BOTTOM SEE SHEET A1.0
OF CLG. - ATTACH W/ (3) 2X6
WINDOW BOT. CONST. ADHESIVE HOLD 3/ 8" SPACE FOR
2" SEE STRUCTURAL
TRACK (SILL BACKER ROD DRAWINGS
CAULK JOINT
RECEPTOR)
WOOD ANODIZED ALUMINUM
3 /8" SPACE ANODIZED ALUM. WINDOW FRAME - SEE
FRAMING D/T WINDOW
CONTINUOUS AROUND WINDOW SCHEDULE.
ENTIRE WINDOW FRAME
PLYWOOD
WEEP HOLES @ 24" O.C. WALL
2x FRAMING
SHEATHING HOLD 3/ 8"
SPACE FOR
BACKER ROD
ADD SILL RECEPTOR AND END DAM
4"
4"
3
3
THIS DIAGRAM SHOWS THE APPLICATION OF SILL RECEPTOR AND VERTICAL
EIFS ADHESIVE DRAINAGE CHANNELS. USE 100% PURE ISOPROPYL ALCOHOL
WINDOW ELEVATION TO CLEAN METAL SURFACE PRIOR TO APPLYING SILICONE.
1" DRAINABLE E.I.F.S. PLYWOOD
NOTE: THERE PLYWD SHEATHING BACKER ROD SHEATHING E.I.F.S.
SHOULD BE A 3 /8" PLYWOOD SHEATHING 3 AND SEALANT SILL
4"
SPACE AROUND 1" DRAINABLE E.I.F.S. BREAK METAL
OVER BUILDING PAPER CONTRACT DATE: XX.XX.XX
THE ENTIRE GLAZING SYSTEM OVER 1/2" PLYWOOD TO MATCH
WINDOW FRAME TO EIFS SYSTEM STOREFRONT BUILDING TYPE: LIVE MAS MEDIUM54
ALLOW FOR A SEE DTL. 7/A6.2 PLAN VERSION: March 2013
YAW404
CONTINUOUS RING
OF BACKER ROD NOTE: SEE DETAIL 16/A6.1 FOR ADDITIONAL INFORMATION REGARDING WATER NOTE: SEE DETAIL 16/A6.1 FOR ADDITIONAL INFORMATION REGARDING WATER SITE NUMBER: XXX-XXX
AND CAULK SIMILAR STOREFRONT PROOFING AT AND NEAR WINDOWS / DOORS PROOFING AT AND NEAR WINDOWS / DOORS STORE NUMBER: XXXXX
TO A TYPICAL WINDOW BODY
GASKET ON A E.I.F.S. JAMB @ SERVICE DOOR 3"=1'-0" 11 WINDOW JAMB @ DRIVE THRU 3"=1'-0" 7 STOREFRONT JAMB DETAIL 3' = 1'-0" 3
BOTTLE TOP. TACO BELL
SUBSTRATE- NOTE: SEE DETAIL 16/A6.1 FOR ADDITIONAL INFORMATION REGARDING WATER
SUBSTRATE-
PROOFING AT AND NEAR WINDOWS / DOORS 123 MAIN STREET
SEE SHEET A1.0 SEE SHEET A1.0
ANYTOWN, USA 98765
ANODIZED ALUMINUM ANODIZED ALUMINUM
INSERT FLASHING BELOW SILL WINDOW FRAME - SEE WINDOW FRAME - SEE
RECEPTOR THEN CAULK WINDOW SCHEDULE. STONE VENEER (VERSETTA) WINDOW SCHEDULE.
ALIGN FRAME WITH
FACE OF SHEATHING VERSETTA PLASTIC
J CHANNEL HOLD 3/ 8"
SPACE FOR
WINDOW FLASHING -
LIVE MAS
TOWER
BACKER ROD
MAINTAIN POSITIVE ALUMINUM
FINISH TO MATCH BREAK METAL
DRAINAGE AWAY
FROM WALL AT STOREFRONT BACKER ROD & CAULK ON TOP TO MATCH STOREFRONT 421" MEDIUM54
PLYWOOD PLYWOOD
ALL FLASHING
NOTE: DO NOT CAULK /
OF SILL FLASHING
SHEATHING BACKER ROD AND SEALANT
OVER BUILDING PAPER
SHEATHING CONSTRUCTION
OVER 1/2" PLYWOOD
OBSTRUCT WEEP HOLES
DETAILS
4"
3
DRILLED IN SILL RECEPTOR
BUILDING SHELL WALL
ANODIZED BACKER ROD
BACKER ROD
AND SEALANT
ALUMINUM
SEALANT
BACKER ROD E.I.F.S.
DOOR/WINDOW
OVER BUILDING PAPER 421" WINDOW PLYWOOD
FRAME - SEE SHEATHING AND SEALANT
OVER 1/2" PLYWOOD 2" E.I.F.S. CONT. 3 /4" X 1 1/2" X
WINDOW
COMPLETING WINDOW SYSTEM BREAK METAL SCHEDULE. HOLD 3/ 8" 26 GA ALUM ANGLE
ALIGN FRAME SPACE FOR FOR CALKING BED
TO MATCH
WITH FACE OF BACKER ROD
A6.1
SET STOREFRONT WINDOW, APPLY EIFS SYSTEM AND THEN ADD WINDOW STOREFRONT
YAW404
YAW404
SHEATHING
FLASHING OVER TOP OF EIFS AT WINDOW SILL
NOTE: SEE DETAIL 16/A6.1 FOR ADDITIONAL INFORMATION REGARDING WATER
SUBSTRATE- PROOFING AT AND NEAR WINDOWS / DOORS
SEE SHEET A1.0
PLOT DATE:
TYPICAL WINDOW WALL WATER PROOFING 16 STOREFRONT JAMB DETAIL 3" = 1'-0" 12 STOREFRONT JAMB AT TOWER 3" = 1'-0" 8 TYPICAL WINDOW JAMB 3"=1'-0" 4
PLYWOOD SHEATHING
LOG TO NG -
1 2
PROJECTS.
1" E.I.F.S.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
E.I.F.S.
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
5
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
3 EXTERIOR GRADE PLYWOOD WOOD STUD WALL FRAMING
WASHER
O
R ELEMENTS
E.I.F.S. WEATHER BARRIER
T'S PRIOR
BLOCKING AS REQUIRED SUBSTRATE
E.I.F.S. FLASHING TAPE
4
R PSITE-SPECIFIC
6 PVC (SCH 40) BUSHING - FILL WITH
8 MFR. APPROVED JOINT
SEALANT SEALANT AND BACKER ROD
REGIONAL ARCHITECTURAL PARTNER (RAP)
TREATMENT
FASTENER AS REQUIRED
IMAGE
J-BOX. MOUNT TO SUPPORTING
RIO
STRUCTURE. PROVIDE POSITIVE WATER PROOF COATING FOR
KITCHEN OPERATIONS MUST BE APPROVED
NOTE: SEAL FROM BOX TO WEATHER WALL SHEATHING
1T
CONSTRUCTION.
O2 INSTALL BUSHING AFTER E.I.F.S. BARRIER
L
NSTHE
APPLICATION HAS HARDENED. DRILL
ITH MEFOR
U
HOLE SLIGHTLY LARGER THAN CONDUIT / PIPE ADHESIVE
D
MODIFICATIONS THAT CHANGE
BUSHING THROUGH INSULATION
JURISDICTIONAL REQUIREMENTS
ONLY, STOP AT PLYWOOD. CAULK AIR SEAL
O
5 INSULATION
CE WENGINEER
OPENING PRIOR TO INSERTING 2x STRUCTURE
I
C
FASTENER TO SEAL PENETRATION. BACKWRAP OPENINGS TRIM BAND
9
THITEMPLATE
MUST BEIS
BASE COAT W/ 20 OZ. HIGH
IMPACT MESH APPLIED
D
ARCHITECT AND/OR
THROUGHOUT. BUTT MESH
S
D LAYERS AT CORNERS, DO NOT
DOCUMENT
WRAP
CONNECTION THRU EIFS 9 CO2 FILL / J-BOX IN EIFS 5
PLA
3" = 1'-0" 3" = 1'-0"
BASE COAT W/ 4.5 OZ.
DRAWINGS
4
1 - PRE-WATERPROOFING STANDARD MESH TO BE
THESE
E
SUPPORTING STRUCTURE APPLIED THROUGHOUT. WRAP
R
CORNERS WITH MESH
REM
5
SUBSTRATE
FINISH
WATERPROOF COATING FOR WALL
SHEATHING
BARRIER MEMBRANE
2 - FINISH-WATERPROOFING
NOTES
SEALANT WITH BACKER ROD BASE COAT AND MESH
1 2X WOOD STUDS 6 WRAP 1" THICK EIFS ONTO VERTICAL FACE OF PARAPET TRANSITION
2 PLYWOOD SUBSTRATE FOR EXTERIOR WALLS BACK-WRAP TERMINATION
7 EIFS FINISH ON OUTER SURFACE OF EXTERIOR WALL. THICKNESS PER
3 FLASHING TAPE AT ALL VERTICAL PARAPET TRANSITIONS. EXTEND TAPE
THE EXTERIOR ELEVATIONS ON SHEET A4.0 CONSULTANT'S
INSULATION
12" OUTWARD AND UPWARD FROM CORNER AS SHOWN. LAP CORNERS
WITH ANGLED TAPE AS SHOWN TO INSURE FULL COVERAGE AT CORNERS 8 TERMINATION BAR AT VERTICAL TRANSITION OF EIFS AND SEAL
MEMBRANE ROOFING. SEAL VERTICAL GAP BETWEEN TERMINATION
4 DOUBLE 2X TOP PLATE. BAR AND EIFS PER ROOFING MANUFACTURER SPECIFICATIONS.
BASE COAT AND MESH
5 PAINTED 24 GAUGE PARAPET COPING. SLOPE 1/4:1 TOWARDS ROOF 9 PVC ROOFING MEMBRANE ON BACKSIDE OF PARAPET.
WITH FIBER CANT STRIPS UNDER COPING. LAP FRONT AND BACK EDGE
2" DOWN VERTICAL FACE. LAP EXPOSED COPING EDGE EXPOSED ENDS FINISH
AT VERTICAL PARAPET TRANSITION.
IMPORTANT : ONLY FASTEN PARAPET COPING ALONG THE FRONT AND BACK VERTICAL EDGE. NEVER ON TOP OF COPING.
PARAPET CAP & TRANSITION N.T.S. 14 NOT USED NTS 10 TYP. E.I.F.S. @ INSIDE CORNER N.T.S. 6 TYP. E.I.F.S. TRIM HIGH-IMPACT N.T.S. 2
PLYWD. SUBSTRATE
2ND SURFACE WATER PROOF WOOD STUD WALL FRAMING
MEMBRANE BELOW FINISH
D MISC.CHANGES 10.25.13
SUPPORTING STRUCTURE 1" THICK EIFS OR STUCCO SUBSTRATE
SUBSTRATE CONT. FLASHING TAPE AT TOP
OF MTL FLASHING
MFR. APPROVED JOINT TREATMENT
STO GOLD FILL WITH STO DETAIL CONT. 4" MTL FLASHING W/ DRIP
MESH EDGE
WATER PROOF COATING FOR WALL
SHEATHING
AIR / MOISTURE BARIER:
STO GOLD COAT
1" ROOFING MEMBRANE CLOSURE VERTICAL ADHESIVE DRAINAGE
2" DRAINABLE STO ADHESIVE STRIP TRACK
WALL SUBSTRATE E.I.F.S.
PER SHT. A1.0 STO INSULATION
CONTINUOUS SILL GASKET
ROOFING MEMBRANE
COORDINATE FOR HIGH IMPACT MESH LOCATIONS
E.I.F.S. TRANSITION (ONLY) AS SPECIFIED ON THE
WITH SLAT WALL EXTERIOR ELEVATIONS: BOTTOM OF EIFS OR STUCCO FOR HIGH IMPACT MESH LOCATIONS CONTRACT DATE: XX.XX.XX
MANUFACTURER STO ARMOR MAT EVEN WITH TOP OF PARAPET. AS SPECIFIED ON THE EXTERIOR
SLAT WALL BUILDING TYPE: LIVE MAS MEDIUM54
STO MESH SEE DTL. 11/A6.0 ELEVATIONS:
SYSTEM
BASE COAT W/ 20 OZ. HIGH IMPACT PLAN VERSION: March 2013
STO BASE COAT MESH TO BE APPLIED FROM THE
SITE NUMBER: XXX-XXX
STARTER TRACK TO HEIGHT
STO GOLD COAT FILL WITH STO
MESH DETAIL SPECIFIED. STORE NUMBER: XXXXX
E.I.F.S. TRANSITION @ SLAT WALL 3"=1'-0" 19 STO FINISH E.I.F.S. TO BASE FLASHING N.T.S. 7 BASE COAT W/ 4.5 OZ. STANDARD
STO GOLD COAT FILL WITH STO
MESH DETAIL
MESH TO BE APPLIED THROUGHOUT TACO BELL
NOTE: HOSE BIB BOX SHALL BE ACUDOR-ARVB OR EQUAL
BULDING PAPER 6" WIDE X 20 MIL BARRIER 123 MAIN STREET
CHAMPFER E.I.F.S. AT STARTER MEMBRANE LAPPED ONTO ANYTOWN, USA 98765
TRACK FOUNDATION. PLACE PRIOR TO
BACK SIDE OF PLYWOOD SHEATHING
PLACING ADJACENT PAVING
STARTER TRACK W/ WEEP HOLES HOSE BIB BOX
COLD WATER LINE TO HOSE BIB E.I.F.S. FLASHING TAPE
GALV. MTL. FLASHING
2x6 WOOD WALL STUD
NOT AN OPTION: Do CAULKING ABOVE BREAK METAL
INSULATION W/ 45 DEGREE
CHAMFER ALONG BOTTOM EDGE
not caulk below EIFS
CAP. COLOR TO MATCH STOREFRONT
FINISH COAT LIVE MAS
MEDIUM54
BACKER ROD AT CAULK JOINT
starter track edge & BREAK METAL CAP
STARTER TRACK W/ WEEP HOLES CONST.
galv. mtl. flashing to WOOD BLOCKING
BACK SIDE OF BOX PATH OF MOISTURE FROM BEHIND
EIFS
DETAILS
LOCKING DOOR
BREAK METAL FILLER BETWEEN
WALL
allow for drainage STOREFRONT AT DINING ROOM. STUCCO
STUCCO SUBSTRATE
MINIMUM DISTANCE FROM:
- WALK-WAY = 1"
- FINISHED GRADE = 6"
behind EIFS. HOSE BIB
YAW026
8 x 8 x 4 STEEL HOSE BIB BOX.
NOTE:
A6.2
E.I.F.S. DETAILS ARE INTENDED TO BE GENERIC. MANUFACTURER'S DETAILS AND RECOMMENDATIONS SHOULD BE FOLLOWED. REFER TO SECTION O7240 OF THE FLASHING TAPE AROUND BOX
EDGE OF CONC. SLAB CURB.
SPECIFICATIONS MANUAL. BUILDING PAPER OVER PLYWOOD
FRONT OF BOX
PLOT DATE:
NOT USED N.T.S. 20 E.I.F.S FLASHING AT TOP OF BREAK METAL 12 HOSE BIB BOX N.T.S. 8 TYP. E.I.F.S. BASE TERMINATION N.T.S. 4
CHAIR RAIL
1/2" x 1/2" ALUMINUM
SEMI-RECESSED
WALL PAINT ABOVE CHAIR CORNER GUARD AT
WASTE RECEPTACLE
LOG TO NG -
RAIL ALL OUTSIDE 1/4" MARMOLEUM (4) #12 S.S. WOOD PANEL WALL
CORNERS - TYPICAL PANEL SCREWS 3/4" LG. W/ S.S.
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
WASHERS.
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
1"
FOR THIS BUILDING TYPE. THESE
ANODIZED
24" MIN.
PAINTED GYP.
CHAIR RAIL
O
ALUMINUM BD.
R ELEMENTS
WINDOW FRAME FOOD GRADE RTV SEALANT
T'S PRIOR
EQ.
SUBSTRATE
1/2" RAD. EASED 1 1/4" TEK SCREW INTERIOR BASE COVE TRIM
R PSITE-SPECIFIC
CORNER (TYP.)
MARMOLEUM PANEL SOLID SURFACE 1/2" x 1/2" THINSET TILE
REGIONAL ARCHITECTURAL PARTNER (RAP)
WINDOW SILL ALUMINUM GROUT
EXTEND FRONT OF PANEL
CORNER GUARD HIT FASTENER
EQ.
IMAGE
TO FRONT EDGE OF ADJ.
PANEL SEAM. AT ALL INSIDE
RIO
KITCHEN OPERATIONS MUST BE APPROVED
SINK. APPROX. 24" (SEE SCREED
SEE DTL. 17/A6.5 TYP. CORNERS - CONCRETE PAD
FACTORY PAINTED "H" MOLD TO PLAN)
CONSTRUCTION.
MATCH MARMOLEUM COLOR TYPICAL
L
NSTHE
1/4" J-MOLDING & 16 GA. BRUSHED
ITH MEFOR
EQ.
U
CAULK STAINLESS STEEL. 1/2"
HEM ON TOP, FRONT
MODIFICATIONS THAT CHANGE
BRONZE BOTTOM & CORNER
JURISDICTIONAL REQUIREMENTS
NOTE: SEE DTL. AND BOTTOM EDGES.
TRIM 2" FLANGE
O
CE WENGINEER
14/A6.5 FOR MTL.
1"
I
BENT 90
C
COVE BASE TILE TRIM.
DEG.
BOTTOM EDGE OF
THITEMPLATE
SPLASH GUARD SHALL
MUST BEIS
BE EVEN W/ THE EDGE
YAW036
CONCRETE CURB
NOTE: THE MARMOLEUM PANELS, CHAIR RAIL & PAINTED MTL. TRIM ARE PROVIDED BY NOTE: CAULK ALL SEAMS AT WALL
D
OF THE HIGHEST ADJ. DYNATROL
ARCHITECT AND/OR
THE DECOR VENDOR. THE GC SHALL INSTALL PANELS TO THE WALL SUBSTRATE WITH SURFACE. SINK. SEALANT
S
ROLLED ON CONTACT GLUE. SEE SCOPE OF WORK.
DOCUMENT
MARMOLEUM TRIM DETAIL 17 MARMOLEUM ATTACHMENT DETAIL 13 SPLASH GUARD 9 WALL CORNER @ WASTE RECEP. 5 WALK-IN TILE/BASE 1
PLA
N.T.S. N.T.S. 1" = 1'-0" 1-1/2" = 1'-0" 1-1/2" = 1'-0"
DRAWINGS
THESE
E
1/2" NUT & WASHER TOP &
R
BOTTOM
REM
2X4 CROSS SUPPORT
LAY-IN CEILING TILES
WALL SUBSTRATE PER SHT. A1.0
ALUM. T-BAR GRID 2 - SIMPSON H3 CLIPS BOTH
SIDES OF CHORD & @ EA
ALUM. T-BAR CORNER TRIM END OF CROSS SUPPORT
GYP. BD. ALUM. RIVETS SAME
INSIDE WALL FINISH PER INTERIOR BOTTOM TRUSS CHORD
CORNER TRIM COLOR AS T-BAR
TYP. ELEVATIONS
LOWER TRIM PIECE SEE RAISED CLG
CHAIR RAIL. PIECE (J-MOLD) HGT. ON PLAN
3/4" 1/2" DIA ALL-THREAD
VIEW ALUM. T-BAR GRID D SUPPORT
SILL GASKET - TYP. SUSP. CEILING TILE
J-MOLD SET IN SILICON SEALANT -
FIT J-MOLD W/ SILICON PRIOR TO
CEILING TILE FLASHING
PLATE
CONSULTANT'S
3"
8
INSTALLING FRP, WIPE OFF EXCESS DECORATIVE SLEEVE SEAL
NOTE: U-239 FOR A ASSEMBLY BY MFR.
CONCRETE FOUNDATION WALL
MARMOLEUM SINGLE MONITOR &
U-242 FOR A DBL. MONITOR BRACKET -
WAINSCOT 8'-4" A.F.F.
MONITOR HANGING ATTACH W/ 1/4" BOLTS -
COVE BASE TILE - SET FLUSH W/ SEE SCOPE OF WORK
BRACKET
FLOOR TILE MONITOR ASSEMBLY
NOTE: SEE INTERIOR
ELEVATIONS FOR LAY-IN CEILING BUMP BAR ASSEMBLY
FINISHES 1/8" OUTSIDE CORNER
YAF053
TAC111
YAC001
TILES
TRIM PIECE KITCHEN WALL
SEE SCOPE OF WORK FOR MORE INFORMATION
SECTION AT CHAIR RAIL 3"=1'-0" 18 MARMOLEUM TRIM DETAIL 6" = 1'-0" 14 CEILING POCKET N.T.S. 10 BASE CONDITION @ EXT. WALL 3" = 1'-0" 6 CEILING MOUNT MONITOR BRACKET N.T.S. 2
FRP WALL 2" FASTEN S.S.
27" CLEAR MIN. (SEE CHART FOR FINISHED HEIGHTS)
2" FINISH TABLE TOP HEIGHTS:
FINISH WITH CONSTR.
ADHESIVE LOW TABLE TOP HGT. = 30" A.F.F. HIGH
ALIGN FACE OF SAFE EVEN WITH PLYWOOD SHEATHING @ SHEAR (H) TABLE TOP HGT. = 42" A.F.F.
THE BACK EDGE OF THE SERVICE WALL DINING COUNTER TOP HGT. = 42" A.F.F. CEILING TILE & GRID
COUNTER.
S.S. WALL EXTEND S.S. D MISC.CHANGES 10.25.13
GUARD FLUSH WALL GUARD
WITH STEEL SUPPORT PLATE
BEYOND
SURFACE OF SURFACE OF FRP
STEEL SUPPORT
FRP WALL THE DEPTH
OF THE TILE AND SAFE - SEE SCOPE OF WORK FOR TILE GROUT
TILE WALL RETURN TO THE SCOPE DEFINITIONS
D
BASE WALL. SILL GASKET - TYP.
5/8" CEMENT BD. SIZE 1/2" POUR-ROCK
SMALLER THAN SAFE FOOTPRINT. J MOLD SET IN SILICON SEALANT -
20 GA S.S. WALL FIT J-MOLD W/ SILICON PRIOR TO FRP
FLOOR TILE
GUARD FROM TOP INSTALLING FRP, WIPE OFF EXCESS
GROUT TO MATCH ADJ. FLOOR.
S.S. WALL OF TILE BASE TO
CEILING CONCRETE SLAB SUBSTRATE PER PLAN
GUARD FLUSH
w/ TILE FLOOR
CONCRETE FOUNDATION WALL
FINISHED CONC. SURFACE D
GROUT LINE
4"
COVE BASE TILE - SET FLUSH W/ CONTRACT DATE: XX.XX.XX
FLOOR TILE ANCHOR BOLTS - SEE SCOPE OF FLOOR TILE BUILDING TYPE: LIVE MAS MEDIUM54
WORK - BOLT HOLES = 3/4" DIA. x 3"
DEEP 3-1/2" DIA.
PLAN VERSION: March 2013
NOTE: THIS DETAIL SHOW A 90 DEGREE CORNER. ADAPT THIS DETAIL AND APPLY
3-1/2" DIA. TABLES ONLY SITE NUMBER: XXX-XXX
WHERE WALLS EXTEND INTO SPACE.
STORE NUMBER: XXXXX
S.S. CORNER & END WALL GUARD N.T.S. 19 SAFE PEDESTAL 1" = 1'-0" 15 BASE @ KITCHEN EXT. REAR WALL 3"=1'-0" 11 CORE DRILL 1 1/2"=1'-0" 7 KITCHEN FINISH @ CEILING 3"=1'-0" 3
TACO BELL
123 MAIN STREET
ANYTOWN, USA 98765
WALL SUBSTRATE PER SHT. A1.0 WALL SUBSTRATE PER SHT. A1.0 WALL SUBSTRATE PER SHT. A1.0 WALL SUBSTRATE PER SHT. A1.0 WALL SUBSTRATE PER SHT. A1.0
WALL FINISH PER INTERIOR WALL FINISH PER INTERIOR WALL FINISH PER INTERIOR WALL FINISH PER INTERIOR WALL FINISH PER INTERIOR
ELEVATIONS ELEVATIONS ELEVATIONS ELEVATIONS ELEVATIONS
LIVE MAS
D D WALL SUBSTRATE PER SHT. A1.0 MEDIUM54
SILL GASKET - TYP. SILL GASKET - TYP. WALL SUBSTRATE PER SHT. A1.0
J-MOLD SET IN SILICON SEALANT - J-MOLD SET IN SILICON SEALANT - J MOLD SET IN SILICON SEALANT -
FIT J-MOLD W/ SILICON PRIOR TO FIT J-MOLD W/ SILICON PRIOR TO FILL J-MOLD W/ SILICON PRIOR TO
INSTALLING FRP, WIPE OFF EXCESS INSTALLING FRP, WIPE OFF EXCESS INSTALLING FRP, WIPE OFF EXCESS
CONCRETE FOUNDATION WALL CONCRETE FOUNDATION WALL FINISH
COVE BASE TILE - SET FLUSH W/
FLOOR TILE COVE BASE TILE - SET DETAILS
COVE BASE TILE - SET FLUSH W/ COVE BASE TILE - SET FLUSH W/ FLUSH W/ FLOOR TILE SANITARY COVE BASE TILE -
FLOOR TILE FLOOR TILE SET FLUSH W/ FLOOR TILE
A6.3
YAF055
YAF056
PLOT DATE:
BASE @ KITCHEN EXT. SIDE WALLS 3"=1'-0" 20 BASE @ DINING EXT. SIDE WALLS 3"=1'-0" 16 BASE IN RESTROOM 3" = 1'-0" 12 BASE @ DINING ROOM INT. WALL 3"=1'-0" 8 KITCHEN FINISH @ BASE 3"=1'-0" 4
2x6 @ 16" O.C.
FOH WALL FINISH 2x6 @ 16" O.C.
OUTLINE OF DRINK TABLE.
LOG TO NG -
PROTECT SYRUP LINES
FROM TRUSS PLATES FPR PANEL & TRIM
PROJECTS.
I TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
10'-8" A.F.F.
AND ADAPTED BY A LICENSED
HOLD DOWN - SEE STRUCTURAL
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
D
TO P OR
INTI
DEEPER GROUT
FOR THIS BUILDING TYPE. THESE
BUNDLED SYRUP LINES DRAWINGS
BACKING @ FOH TILE
O
AND FILTERED WATER LINES 2x6 STUDS @ 16" O.C.
R ELEMENTS
9'-4" A.F.F.
BASE
T'S PRIOR
SUSP. CEILING
TRIM CORNER OF
R PSITE-SPECIFIC
OPENING IN WALL BELOW. SEE FOH BASE TILE WALL FINISH OVER 2x4 BRACE @ 16" O.C. TO STRUC. ABOVE
REGIONAL ARCHITECTURAL PARTNER (RAP)
DETAIL 15/A6.4 1/2" PLYWOOD
2x6 JOISTS @ 16" O.C.
FOH TILE BASE
IMAGE
RIO
BOTTOM CHORD 2x6 STUDS @16" O.C.
KITCHEN OPERATIONS MUST BE APPROVED
J-BOXES ON EITHER SIDE OF STUD BOH TILE BASE ROTATING MENU
OF ROOF TRUSS ALIGNED VERTICALLY BOARD
CONSTRUCTION.
L
VERTICAL SYRUP CHASE FROM DEEPER GROUT BED
NSTHE
ITH MEFOR
OPTIONAL INSTALLATION: 1"
U
ABV. CLG. TO 20" A.F.F. SEE DETAIL @ FOH FLOOR TILE 8'-4" A.F.F.
WIDE GALV. STRAPS @ EA. 19/A6.4.
FLOAT TO BOH TILE
MODIFICATIONS THAT CHANGE
TRUSS (MAX. 6'-0" O.C.)
JURISDICTIONAL REQUIREMENTS
VENT TO ROOF FOR F.S. LEVEL
EPL MUST BEISREVIEWED
O
E WENGINEER
J-BOXES ON ONE SIDE OF STUD
A
C
NOTE: ALIGNED VERTICALLY
L
THINNER GROUT BASE BEHIND THE BOH TILE BASE 1/2" GYP. BD. PAINTED
THITEMPLATE
SEE SCOPE OF WORK FOR
C
SCOPE DEFINITIONS
VERTICAL SYRUP CHASE FROM BECAUSE BOH TILE BASE IS THICKER THAN THE FOH 7'-0" A.F.F. 3" FRP OVER 1/2" PLYWOOD TO BOTT.
ABV. CLG. TO 20" A.F.F. SEE
YAC003
BASE. NOTE: THIS WILL TYP. OCCUR ON SHORT OF TRUSS
DETAIL 19/A6.4.
D
WALLS ONLY.
ARCHITECT AND/OR
J-BOXES ON ONE SIDE OF STUD
NOTE: ALLOWABLE ALTERNATE FRAMING: 3-58" MTL. STUDS W/FLEX
S
ALIGNED VERTICALLY TRACK FOR BULKHEAD FRAMING.
C
DOCUMENT
SYRUP LINE IN CEILING 17 TILE BASE TRANSITION 9 MENU BOARD/SOFFIT SECTION 1
A
N.T.S. 3/4" = 1'-0"
DRAWINGS
THESE
R
REM
FASTEN 2X BLOCKING TO FACE OF
ADJACENT WALL OR TRUSS
DOUBLE STUDS AT JAMB
J-BOXES ON EITHER SIDE OF STUD AND HEAD WITH ANCHOR
ALIGNED VERTICALLY STRAP.
PLUMBER'S TAPE STRAP
5/8"
2"
7" DIA. OPENING IN CEILING TILE
HM FRAME
NOTE: COORDINATE PLACEMENT
6" PVC OF INWALL ITEMS WITH PLUMBING CONSULTANT'S
AND ELECTRICAL TRADES. SEE
SHEET P4.0, E3.0 AND E5.0 SEAL
HOLD DOWN - SEE STRUCTURAL
DRAWINGS D
WD. DOOR
SECTION VIEW
SYRUP LINE BUNDLE THRU CLG. SEALANT
SUBSTRATE AS NOTED ON
SHEET A1.0
SYRUP BUNDLE CLG. PENETRATION N.T.S. 18 INTERIOR CHASE WALL N.T.S. 14 JAMB @ H.M. DOOR 3" = 1'-0" 10 NOT USED N.T.S. 6 NOT USED N.T.S. 2
DRINK LINES FROM WATER FILTER, CENTER
SYRUP RACK & Co2 CANISTER IN BEHIND AND
BACK OF KITCHEN ABOVE CEILING ABOVE DRINK
BETWEEN STUDS PER
& ICE MACHINE
DTL 14/A6.4
TILE INSIDE EDGE
OF OPENING
LINE OF CLG. SELF SERVE DRINK
PERIMETER D MISC.CHANGES 10.25.13
12" 14" TABLE
S.S. DRINK LINE CHASE. WALL TILE BASE
4" D X 10" W X 30" H W/ 1"
FLANGES. FASTEN W/
S.S. SCREWS CLEAR
CAULK
DRINK LINE THROUGH 14"
OPENINGS IN TABLE
OUTLINE OF DRINK &
ICE MACHINE
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
NOTE: SEE DETAIL 11/P6.0 DRINK SYSTEM SCHEMATIC & DETAIL 12/P6.0 FOR DRINK LINES
STORE NUMBER: XXXXX
SYRUP CHASE ON WALL N.T.S. 19 NOT USED N.T.S. 15 WALL PASS THRU NTS 11 NOT USED N.T.S. 7 NOT USED N.T.S. 3
D
TACO BELL
SILL PLATE SILL PLATE
MORTAR BED PER MFR SPECS. 123 MAIN STREET
D
ANYTOWN, USA 98765
BUILDING PAPER
2.5 GALV. METAL LATH
(PER SPECS.) SHALL
OVERLAP J-MOLD AT
BUILDING PAPER SILL GASKET - SILL GASKET - D
BOTTOM OF VENEER
(PER SPECS.) SHALL TYP. TYP.
OVERLAP J-MOLD AT
BOTTOM OF VENEER CONCRETE
TYP. FACE OF LAPPED BORAL VERSETTA STONE FASTENER
BORAL VERSETTA STONE
STONE SCRATCH COAT VENEER. INSTALL PER MFR.'S SLEEVE (TYPE)
TYP. END OF LAPPED CULTURED STONE
RECOMMENDATIONS
VENEER. INSTALL PER MFR.'S
RECOMMENDATIONS VERSETTA PANEL
FASTENERS PER MFR.
LIVE MAS
STONE VENEER ADHERED WITH MEDIUM54
RECOMMENDATIONS
MORTAR PER MFR.'S
BUILDING PAPER (PER SPECS) (TYP)
RECOMMENDATIONS BORAL VERSETTA STONE
STARTER STRIP (CONT.)
TYP. GROUT JOINT
PLYWOOD SHEATHING
CONSTRUCTION
TYPICAL CORNER GALV. ANGLED WEEP SCREED 2"
MIN.
PAINT EXPOSED
D
DETAILS
FOUNDATION
NOTE:
THE TYPICAL CORNER TREATMENT FOR STONE VENEER IS SHOWN WOOD STUD FRAMING
PAVING
SLOPE 2% MIN. 4"
TO MATCH
EXISTING WALL
INTERIOR
ABOVE. ALTERNATE LAPPING STONES AS SHOWN ABOVE. MIN.
VERSETTA STONE CORNER PIECE
GRADE
A6.4
FIELD STONE SHALL HAVE HORIZONTAL GROUT LINE ALIGNED WITH - ALTERNATE SHORT END
THE FINISH FLOOR. HORIZONTAL GROUT JOINTS SHOULD NOT RETURNS ABOVE AND BELOW AT SLOPE 2% MIN.
EXCEED 4 TO 6 FEET. CORNER (SHOWN AS DASHED)
ALTERNATE ALTERNATE
PLOT DATE:
NOT USED N.T.S. 20 TYPICAL STONE VENEER CORNER N.T.S. 16 STONE WAINSCOT @ TOWER LEG 3"=1'-0" 12 STONE VENEER OUTSIDE CORNER 3" = 1'-0" 8 STONE WAINSCOT @ TOWER LEG 3" = 1'-0" 4
F
T-2
2 B-2
T-1
G
B-1
3
D
5
1'-3"
T-1
4" 1
B-1 TYP. @ ALL
KITCHEN AREAS
T-1 3 10
13
B-1 11
CONSULTANT'S
7 T-2 SEAL
B-2
13
10 12
G
C
4'-7"
7 13
15
16 SLOPE :
1/8" PER FT.
4'-1012"
14 T-1 4
T-1
9
B-1
3 10 SLOPE :
1/8" PER FT.
2"
B D MISC.CHANGES 10.25.13
1'-2"
G PROTOTYPE UPDATES 1.30.14
T-2
8
B-2
T-2
10 12
B-2
2
13 (TYP.)
A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
FLOOR FINISH PLAN 1/4"=1'-0" A
TACO BELL
A. DENOTES FINISH MATERIAL. REFER TO SHT A7.2 FOR FINISHES.
1 FACTORY FLOOR FINISH (GALV STL) W/ INTEGRAL COVE BASE 13 FLOAT FLOOR TILE FOR FLUSH TRANSITION.
123 MAIN STREET
B. TILE JOINTS (U.O.N.):
2 6" COVE TILE BASE. SEE DETAIL 8/A6.3 FOR INSTALLATION. 14 DIMENSION STRING REPRESENTS LINE OF FLOOR TILE TRANSITION. ANYTOWN, USA 98765
1. QUARRY FLOOR TILE : 1/4"
2. PORCELAIN FLOOR TILE : 3/16"
3 6" SANITARY COVE TILE BASE. SEE DETAIL 4/A6.3. 15 NO BASE TILE BEHIND W-075 WALK-IN COOLER/FREEZER.
3. GLAZED WALL TILE : 1/8"
4. BASE, TRIM AND ACCESSORIES : MATCH ADJOINING TILE UNITS
4 PROVIDE FLOOR TILE INSIDE WALK-IN COOLER (NO TILE OR BASE IN FREEZER). FLOAT 16 ALIGN TOP OF B-2 AND B-1. SEE DETAIL 9/A6.4.
FLOOR TILE IN COOLERS TO DRAIN TO KITCHEN. COORD. WITH COOLER WALL
C. TILE INSTALLATIONS REQUIRE MANUFACTURERS STANDARD MOLDED CORNERS
CONFIGURATION.
AT BOTH INSIDE AND OUTSIDE CORNERS.
5 PLATFORM FOR SAFE - SEE DETAIL 15/A6.3
D. ALL BASE TILE SHALL BE SANITARY COVE STYLE WITH 3/8" MIN RADIUS UNLESS NOTED
OTHERWISE.
6 NOT USED.
LIVE MAS
MEDIUM54
E. SEE SCOPE OF WORK SHEETS FOR RESPONSIBILITIES.
7 FLOOR TILE SHALL TRANSITION AT SERVICE COUNTER WALL.
F. PROVIDE CLEAR SILICONE CAULK WHERE FRP STOPS AT TOP OF COVE BASE.
8 START POINT FOR FLOOR TILE.
G. TILE CHIPPING AROUND CORE DRILL HOLES FOR SEATING FIXTURE WILL NOT BE
9 METAL BASE IN COOLER; SEE SCOPE OF WORK. SEE DETAIL 1/A6.3.
D FLOOR
ACCEPTED.
10 REFER TO STRUCT DRAWINGS FOR CONC FLOOR SLOPES AROUND FLOOR DRAINS. FINISH
11 FLOAT FLOOR TILE TO MEET FREEZER FLOOR FLUSH. COORD WITH FREEZER
THRESHOLD INSTALLATION.
PLAN
12 SANITARY TILE BASE IN RESTROOMS. SEE DETAIL 12/A6.3 FOR INSTALLATION.
A7.0
PLOT DATE:
NOT USED F FINISH NOTES D KEY NOTES B
F
E
7 D
25 TYP.
22 3 TYP. @ 22
14 A6.3 B.O.H. 14
D G
1'-8"
1
1'-1012"
1'-2"
13
TYP.
19 5 8'-10"
2'-11" 5'-612" 5'-612" 5'-612" CL-1 G
26 17 4" 2'-612" 4"
12
TYP. 16 D
11'-1"
G 2
G 8'-10"
3'-0"
S 12 CL-1
15'-112"
TYP. 8
27 18
15
S 20 3
17'-512" 25
G
8'-10"
TYP. 11 CL-2
10 CL-1 CONSULTANT'S
13 P-5
1
SEAL
EQUAL
7'-0" A6.4
3'-11"
G
9'-4" D
CL-3 9
5'-1"
3'-9"
D
CL
1'-3"
6 25 C
19'-312" CL-2
TYP.
8"
2'-9" 13 EQ. EQ.
18
S
EQUAL
8'-6"
8"
12 6
8'-6"
4'-912"
TYP. P-6 12
1'-4"
CL-2
EQ.
S S P-6
9'-1012" 6
8'-10"
2'-11" 2'-0 2"
13 TYP. 25
4
1
2'-7" TYP. 12 9'-4" CL-3 CL-1
EQ.
24 S 1
5"
1'-512" 4'-1112" 4'-512" 2'-612"
2'-9"
D 3'-7"
6 B
12
1'-0"
23
22
1'-2"
D
16 14
D MISC.CHANGES 10.25.13
1 8"
23 24 22 22 G PROTOTYPE UPDATES 1.30.14
16 P-6 14 14
8'-6"
CL-2
A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
REFLECTED CEILING PLAN 1/4"=1'-0" A
TACO BELL
DIMENSIONS: 1 CEILING GRID STARTING POINT. 17 SECURITY STROBE LIGHT, REFER TO ELECT. DWGS.
1'-0" x 4'-0" EXTERIOR WALL FIXTURE A. ALL DIMENSIONS ARE TO FACE OF FINISH U.O.N.
FLUORESCENT LIGHT 2 BULKHEAD @ 8'-0" A.F.F. D 18 FAN COIL FOR WALK-IN. 123 MAIN STREET
FIXTURE CEILING FINISHES: ANYTOWN, USA 98765
S SPEAKER A. REFER TO ROOM FINISH SCHEDULE (SHT A7.2) FOR CLG. FINISHES. 3 NON-INSULATED BUNDLED SYRUP LINES FOR DRINK SYSTEM. SEE SCOPE OF WORK. 19 6" x 6" 18 GA. STAINLESS STEEL CHASE ALONG WALL FOR ICE MACHINE REFRIGERANT
2'-0" x 4'-0" SEE DETAIL 17/A6.4. D LINES: 6" ABOVE CEILING TO TOP OF ICE MACHINE.
FLUORESCENT LIGHT 12" EXHAUST FAN SUSPENDED CEILING:
FIXTURE A. ACOUSTICAL PANEL INSTALLATION: INSTALL ACOUSTICAL PANELS WITH EDGES IN 4 6" DIA PVC STUB THROUGH CEILING, SEE DETAIL 18/A6.4. 20 ALERT LIGHT BOX FOR 3-COMP POWER SOAK MOUNTED AT C.L. OF BOX 7-11" AFF
CLOSE CONTACT WITH METAL SUPPORTS AND IN TRUE ALIGNMENT. G
DOWNLIGHT @ WALK-IN B. ALLOWABLE VARIATIONS FROM FLAT AND LEVEL SURFACE: 1/8" IN 10'-0" MAX. 5 HOOD. 21 RAISED INDICATED SECTION OF CEILING TO 8'-10".
(BY WALK-IN MFR.) HVAC RETURN GRILLE C. ALLOWABLE VARIATIONS FROM PLUMB OF GRID MEMBERS: AS CAUSED BY ECCENTRIC
6 FOR ROUGH FRAMING OPENINGS SEE AIR DEVICE SCHED. (TYP. AT RESTROOMS). 22 ALIGN BOTTOM OF LIGHT FIXTURE MOUNTING PLATE WITH EIFS REVEL / CHANGE IN
D. INSTALL SYSTEM AFTER MAJOR ABOVE CLG. WORK IS COMPLETE. COORD LOCATIONS EIFS THICKNESS.
SUSPENDED DOWNLIGHT
AT OPEN TRUSS HVAC SUPPLY DIFFUSER
OF HANGERS WITH RELATED WORK.
E. SEE SPECS FOR ADDITIONAL INFORMATION.
7 DRIVE THRU CANOPY.
23 DECORATIVE SLAT WALL BY VENDOR. SEE BUILDING ELEVATIONS.
LIVE MAS
8 ROOF HATCH. SEE 7/A6.0. MEDIUM54
PENDANT FIXTURE GYPSUM BOARD CEILING: 24 3 ROWS OF LED LIGHTS BEHIND SLAT WALL. SEE BUILDING SECTIONS. BOLD
A. SUBSTRATE SHALL BE 1/2" THICK GYP BD. 9 MENU BOARD. SEE SCOPE OF WORK.
B. ACOUSTICAL SEALANT: APPLY TO GYP. BD. PANELS AS INDICATED IN SPECS. 25 ALUMINUM VALANCE. SEE SCOPE OF WORK.
DOWNLIGHT HVAC SUPPLY DIFFUSER GYP. BD. FINISHING AND DECORATING: REFER TO DWGS FOR TEXTURE AND FINISHES. 10 MENU BOARD BULKHEAD - BOTTOM OF SOFFIT AT 7'-0" A.F.F. / SEE DETAIL 1/A6.4.
26 STAINLESS STEEL SYRUP CHASE ON WALL. SEE DETAIL 19/A6.4. REFLECTED
EMERGENCY LIGHTS ELECTRICAL: 11 PRE-FABRICATED & PRE-FINISHED SOFFIT BY 3RD PARTY VENDOR.
A. SEE ELECT. DWGS. FOR FIXTURE SCHED. PROVIDE CLG. TILES ABOVE SOFFIT. D-550 27 WATER INLET CHASE FOR CHEESE MELTER SCREWED TO HEATED AIR SCREEN CEILING
EXIT LIGHT HVAC PERFORATED 12 SPEAKER, CENTER IN CEILING TILE PANEL.
(WALL MOUNTED) SUPPLY DIFFUSER
D
PLAN
13 PENDANT LTG - CENTER OVER TABLE TOP (TYP). COORDINATE WITH DECOR FIELD
EXIT LIGHT INSTALLATION.
(CEILING MOUNTED) BACK DOOR SECURITY
A7.1
STROBE LIGHT 14 EXTERIOR WALL LIGHT FIXTURES, SEE ELEVATIONS AND ELECT. DWGS.
PENDANT OR DIRECTIONAL EXTERIOR CANOPY 15 UTILITY CHASE BY 3RD PARTY VENDOR TO CEILING.
FIXTURE, TRACK MOUNTED FLUORESCENT LIGHT
16 EMERGENCY DUAL HEAD FIXTURE. SEE ELECT. DWGS.
PLOT DATE:
NOT USED 1/4"=1'-0" F CEILING SYMBOL LEGEND E REFLECTED CEILING PLAN NOTES D KEY NOTES B
FLOORING WALL FINISHES LAMINATES CEILINGS
DESCRIPTION ALTERNATE / NOTE DESCRIPTION ALTERNATE / NOTES. DESCRIPTION ALTERNATE/ NOTE DESCRIPTION ALTERNATE / NOTE
-
SYM SYM SYM
LOG TOTING
PROJECTS.
AIMTO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
AND ADAPTED BY A LICENSED
T-1 MFR.: DAL TILE MFR.: AMERICAN OLEAN P-1 MFR.: SHERWIN WILLIAMS ANODIZED CORNER GUARDS AND CL-1 MFR.: CERTAINTEED MFR.: US GYPSUM CO.
WC-1 MFR.: FORBO
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
TYPE: QUARRY #Q01 NON ABRASIVE J-MOLDS BY NATIONAL METAL SHAPES
FOR THIS BUILDING TYPE. THESE
TYPE: QUARRY #0Q40 NON ABRASIVE TYPE: SATIN / EGGSHELL LATEX TYPE: TYPE: CLIMAPLUS LAY-IN CEILING PANEL
COLOR: CANYON RED TYPE: MARMOLEUM
IN
COLOR: RED BLAZE COLOR: SW7069 IRON ORE (DK. GREY) (DARK BRONZE). INTERMEDIATE
O
COLOR: 3825 AFRICAN DESERT (FRESCO) GREEN COLOR: WHITE COLOR: FLAT WHITE #050, VINYL 3270
R ELEMENTS
GREEN SIZE: 6"x6"
SIZE: 6"x6" PRIMER: #023 (WHITE) FRESH START 100% ACRYLIC VERTICAL TRIM BY DECOR VENDORS GRID: WHITE SUSPENSION GRID W/ ALUMINUM FACE NOTE: 24"x48"
T'S PRIOR
GROUT: CUSTOM #95 SABLE BROWN GROUT: #95 SABLE BROWN (PAINT FOR CL-1) PAINTED SAME COLOR AS WALL PANEL. NOTE: FLAME SPREAD RATING 0-25, CLASS A NOTE: SEE SPECIFICATIONS
R PSITE-SPECIFIC
T-2 MFR.: DAL TILE MFR.: CROSSVILLE P-2 MFR.: SHERWIN WILLIAMS P-2 MFR.: SHERWIN WILLIAMS ANODIZED CORNER GUARDS AND CL-2 MFR.:
WC-2 MFR.: FORBO J-MOLDS BY NATIONAL METAL SHAPES
TYPE: TERRA ANTICA CERAMIC TILE TYPE: COTTO AMERICANA TYPE: SATIN / EGGSHELL LATEX TYPE: SEMI-GLOSS LATEX TYPE: GYPSUM BOARD
REGIONAL ARCHITECTURAL PARTNER (RAP)
TYPE: MARMOLEUM
COLOR: ROSSO TA02 GREEN COLOR: AV173 RED COLOR: SW6657 "AMBER WAVE" COLOR: SW6657 "AMBER WAVE" GREEN (DARK BRONZE). INTERMEDIATE COLOR: GREEN
COLOR: 3030 BLUE (REAL)
IMAGE
SIZE: 18"x18" OR 12"x12" SIZE: 18"x18" OR 12"x12" PRIMER: #023 (WHITE) FRESH START 100% ACRYLIC RESTROOMS VERTICAL TRIM BY DECOR VENDORS
RIO
KITCHEN OPERATIONS MUST BE APPROVED
GROUT: CUSTOM #95 SABLE BROWN GROUT: CUSTOM #95 SABLE BROWN (ORANGE) NOTE: HIGH-GLOSS DOOR FRAMES PAINTED SAME COLOR AS WALL PANEL.
CONSTRUCTION.
P-3 MFR.: SHERWIN WILLIAMS CL-3 MFR.: USG SUSPENDED CEILING TILE * GRID, VENTS, SPEAKERS TO BE
FRP-1 MFR.: MARLITE
L
NSTHE
TYPE: SATIN / EGGSHELL LATEX TYPE: 414, FROST, 24x24x1/2" FACTORY PAINTED WITH BLACK
TH C EFOR
U
TYPE: FIBERGLASS REINFORCED PANEL
COLOR: SW6510 "LOYAL BLUE" COLOR: FLAT BLACK #205
COLOR: FP-100 WHITE (PEBBLED FINISH)
PRIMER: #023 (WHITE) FRESH START 100% ACRYLIC GRID: ARMSTRONG PRELUDE XL 15/16" EXPOSED TEE
MODIFICATIONS THAT CHANGE
NOTE: NO COLOR VARIATIONS ACCEPTED
JURISDICTIONAL REQUIREMENTS
(BLUE) COLOR: PRE-PAINTED BLACK
REVIEWED
O
CE WENGINEER
P-5 MFR.: SHERWIN WILLIAMS
TYPE: SATIN / EGGSHELL LATEX
ISCL
THITEMPLATE
COLOR: SW 6839 "KIMONO VIOLET"
PRIMER: #023 (WHITE) FRESH START 100% ACRYLIC
I
S BE
D
ARCHITECT AND/OR
P-6 MFR.: SHERWIN WILLIAMS
REP MUST
TYPE: SATIN / EGGSHELL LATEX
DOCUMENT
COLOR: SW 6116 "TATAMI TAN"
A
PRIMER: #023 (WHITE) FRESH START 100% ACRYLIC
DRAWINGS
L
THESE
P-8 MFR.: SHERWIN WILLIAMS
TYPE: SEMI-GLOSS
REM
COLOR: SW7002 "DOWNY"
PRIMER: #023 (WHITE) FRESH START 100% ACRYLIC
S-1 MFR.: WILSONART
TYPE: SOLID SURFACE
COLOR: AVALANCHE MELANGE #9175ML
CONSULTANT'S
TM-1 MFR.: OLYMPIC PREMIUM WOOD STAIN TM-1 MFR.: DALY'S WOOD STAIN
TYPE: CHAIR RAIL TYPE: CHAIR RAIL SEAL
COLOR: "AMERICAN CHERRY" COLOR: DALY'S #45
1 x 2 SOLID MAPLE
TM-2 MFR.: SCHLUTE
TYPE: 3/8" TILE EDGE TRIM
COLOR: CLEAR ALUMINUM
WT-1 MFR.: NOT USED
TYPE:
COLOR:
WT-2 MFR.: DALTILE WT-2 MFR.: ROCA TILE GROUP
WALL BASE TYPE: 12"X24" FABRIQUE LINE OPT. TYPE: LINEN UFLI200-12 MILLWORK DOORS
COLOR: SOLEIL LINEN P687 UNPOLISHED GREEN COLOR: BEIGE
SIZE: 12"X12" AT RESTROOMS SIZE: 12"X12" AT RESTROOMS
SYM DESCRIPTION ALTERNATE / NOTE GROUT: MAPEI #06 "HARVEST" GROUT: MAPEI #06 HARVEST
SYM DESCRIPTION ALTERNATE / NOTE SYM DESCRIPTION ALTERNATE/ NOTE
B-1 MFR.: AMERICAN OLEAN NOTE: PL-1 MFR.: NEVAMAR DL-1 MFR.: NEVAMAR * DOOR EDGES SHALL BE D MISC.CHANGES 10.25.13
TYPE: QUARRY #Q01 TILE TO BE INSTALLED WITH THE GRAIN HORIZONTAL TYPE: WM-8-350T TYPE: WM-8-350T FINISHED SIMILAR TO FACES
COLOR: RED TO MATCH T-1 COLOR: CARMEL SAGAWOOD COLOR: CARMEL SAGAWOOD E PROTOTYPE UPDATES 12.9.13
GREEN
SIZE: 5" x 6" WT-4 MFR.: DALTILE WT-4 MFR.: ROCA TILE GROUP
GROUT: #95 SABLE BROWN TYPE: 12"X24" FABRIQUE LINE OPT. TYPE: LINEN UFLI300-1224
COLOR: SOLEIL LINEN P687 UNPOLISHED GREEN COLOR: BEIGE
B-2 MFR.: DAL TILE MFR.: CROSSVILLE SIZE: 12"X24" AT DINING RM. SIZE: 12"X24" AT DINING RM. DL-2 MFR.: BOBRICK
TYPE: TERRA ANTICA CERAMIC TILE TYPE: COTTO AMERICANA GROUT: MAPEI #06 "HARVEST" GROUT: MAPEI #06 HARVEST TYPE: SIERRA SERIES 1090
COLOR: ROSSO TA-02 COLOR: AV173 RED COLOR: SC03 "TERRA COTTA"
SIZE: 6"x12" COVED BASE
GREEN
SIZE: 6"x12" COVED BASE NOTE: SOLID COLOR REINFORCED COMPOSITE
GROUT: CUSTOM #95 SABLE BROWN GROUT: CUSTOM #95 SABLE BROWN TILE TO BE INSTALLED WITH THE GRAIN HORIZONTAL
WT-5 MFR.: DALTILE WT-5 MFR.: ROCA TILE GROUP DL-3 MFR.: NEVAMAR ALTERNATE : FORMICA 933-58
TYPE: FABRIQUE LINE OPT. TYPE: LINEN UFLI200-S43CD TYPE: S7027T MISSION WHITE
COLOR: SOLEIL LINEN P687 UNPOLISHED GREEN
COLOR: BEIGE COLOR: SMOKY WHITE
SIZE: 3"X12" SHAPE NUMBER P-43C9 SIZE: 3"X12" E * DOOR EDGES SHALL BE FINISHED
GROUT: MAPEI #06 "HARVEST" GROUT: MAPEI #06 HARVEST SIMILAR TO FACES
NOTE: CONTRACT DATE: XX.XX.XX
TILE TO BE INSTALLED WITH THE GRAIN HORIZONTAL
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
TACO BELL
DALTILE NATIONAL METAL SHAPES DAVIS COLORS
1. INSTALL FRP ON KITCHEN SIDE OF SERVING COUNTER WALL. FRED DAVIS Russel Day (Mortar Pigment) 123 MAIN STREET
502-423-5456 800-837-9559 West: 800-356-4848
ANYTOWN, USA 98765
2. GALV STEEL WALL AND CEILING FINISHES BY WIC / WIF BOX MFR. FRED [email protected] East: 800-638-4444
CROSSVILLE TILE
3. REFER TO INTERIOR ELEVATIONS FOR LOCATIONS OF TILE AND FRP. MARLITE MONICA FARLEY
DAN EGBERS 714.501.7693
4. FOR FINISH LOCATIONS REFER TO: 330-343-6621 [email protected]
SHEETS A4.0 & A4.1 - EXTERIOR ELEVATIONS WWW.MARLITE.COM
SHEET A7.0 - FLOOR FINISH PLAN ROCA TILE GROUP
SHEET A7.1 - REFLECTED CEILING PLAN WILSONART INTERNATIONAL, INC. CHRISTINA DORDAS
SHEETS A8.0 TO A8.3 - INTERIOR ELEVATIONS DAN CHICKVARA
254-207-2130
[email protected]
708-910.2368
WWW.ROCATILEGROUP.COM LIVE MAS
5. APPROVED PAINT MANUFACTURERS: MEDIUM54
PORTER, BENJAMIN MOORE, SHERWIN WILLIAMS, ICI, & PITTSBURGH PAINTS.
MATCH SPECIFIED SCHEDULE COLORS EXACTLY.
SHERWIN WILLIAMS
6. ALL PAINTED GYPSUM BOARD SHALL HAVE A LIGHT ORANGE PEEL TEXTURE BRAD HARRINGTON
216-341-5553 EXT. 115
CELL: 216-210-2723
7. ALL MORTAR SHALL BE MIXED WITH WHITE SAND TO INSURE A COLOR
CONSISTENT TO THE ORIGINAL DESIGN INTENT [email protected] FINISH
FORBO
DAVE BOLINGER
SCHEDULE
614-583-8504
CELL: 1-614-439-7343
FAX: 1-614-583-8504
[email protected]
A7.2
PLOT DATE:
ROOM FINISH NOTES D CONTACTS C ROOM FINISH SCHEDULE LEGEND A
WALL TILE TO CORNER S.S. CORNER WALL TILE S.S. CORNER
UNDER CRONER TRIM GUARD TO CORNER GUARD
UNDER
FACE OF SERVICE CRONER SERVICE COUNTER
COUNTER TRIM TOP
BASE TILE
SERVICE
SERVICE COUNTER NOTCH S.S.
COUNTER DIE
SUPPORT LEG TRIM AS
NEEDED
TRIM @ BASE TILE TRIM @ COUNTER TOP
7
WT-4 L-014
P-3 TYP. P-3 P-3 P-3 SHALLOW WALL
P-5
SURFACE BEHIND MB
8 S-513
TYP. 18
9'-4" BOTTOM OF CEILING
9'-4" BOTTOM OF CEILING
P-5 U-034 J
WT-4
BOTTOM OF MENU BOARD SOFFIT
3 TYP.
3 OPEN TO
TM-2 S-284 OPEN TO BEYOND
KITCHEN
TYP. 6 I
15 U-034
C
E WT-4
12
7'-0" A.F.F.
2 TM-1 TM-1 2
G5 15 9 (INSIDE) P-2
TYP.
13 14
6'-1"
S-1 2 TM-1
6'-6"
4
3'-121"
2 TM-1 11 15
4'-0"
6 6
3'-121"
10 19 SEE WT-4 WC-1
WC-2 ELEV. 5
(INSIDE)
E S-444 B-2
B-2 S-443
S-371
S-544
2 1
DINING 3/8"=1'-0"
CONSULTANT'S
SEAL
TYP. P-2 P-2 TYP. P-2 P-2 P-2
1
20
8
TYP.
2'-0"
G14
12" EQ. EQ. EQ. 12"
9'-4" BOTTOM OF CEILING
9'-4" BOTTOM OF CEILING
G16
1"
G12 G19 G18 G15 8
2'-0"
2'-0"
TM-1
TYP. TYP. TYP.
2
20 20 20 20 2 TM-1 2 TM-1 G17 G13
8'-0"
7'-0"
2'-0" 1" 2'-0"
S-1 S-1 S-1 S-1
4 4 4 4
3'-121"
3'-121"
TM-1 TM-1 2
D MISC.CHANGES 10.25.13
4'-0"
4'-0"
2
3'-121"
3'-7"
TM-1
3'-121"
3'-121"
10 E PROTOTYPE UPDATES 12.9.13
2
WC-1
10 10 10
WC-1 B-2 B-2 WC-1
4 B-2 WC-1 B-2 3
DINING 3/8"=1'-0"
NOTE: STOP THE TILE AND 1 FOR ARTWORK DESCRIPTION, REFER TO ARTWORK SCHEDULE ON SHEET A2.0. CONTRACT DATE: XX.XX.XX
CORNER GUARD 41" BELOW
THE LEVEL FACE OF 2 CHAIR RAIL. REFER TO DETAIL 18/A6.3. BUILDING TYPE: LIVE MAS MEDIUM54
GYP. BD.
ADJACENT CEILING
3 MENUBOARD BULKHEAD. PLAN VERSION: March 2013
FRP FINISH 4 WINDOW SILL. SITE NUMBER: XXX-XXX
GYP. BD.
SS CORNER 5 H.C. SIGNAGE STORE NUMBER: XXXXX
GUARD TILE BEDDING
6 PROVIDE CLEAR SILICONE CAULK WHERE ALL FIXED AND BUILT-IN COUNTERS /
BEND EDGE TO DEPTH WALL TILE EQUIPMENT ABUT WALL SURFACES. WHERE GAP BETWEEN WALL AND COUNTER SPLASH /
OF TILE & BEDDING SO EQUIPMENT EXCEEDS 1/4", PROVIDE S.S. CLOSURE ANGLE.
TACO BELL
P-2 P-2 P-2 FLUSH W/ TILE SURFACE. VERTICAL GROUT LINE
7 6" X6" 18 GAUGE STAINLESS STEEL CHASE. 123 MAIN STREET
DL-1 DL-1 DL-1
P-5 P-2 ANYTOWN, USA 98765
8 DROP PENDANT LIGHT FIXTURE. SEE SCOPE OF WORK AND SHEET E4.0.
9 "PLEASE ASK IF YOU NEED ASSISTANCE" SIGN. SMALLWARE PACKAGE.
P-2 10 REFER TO 13, 14 & 17/A6.3 FOR WAINSCOT INSTALLATION.
P-2
11 START CHAIR RAIL. SEE SHT. A1.0 FOR DIMENSIONS.
5 12 OMIT CHAIR RAIL BEHIND DRINK STATION.
5 P-5
3
13 OPENING FINISHED WITH FRP FOR SYRUP TUBES. SEE 11/A6.4 AND SHEET A1.0.
LIVE MAS
14 SECURITY SYSTEM KEYPAD, SEE E5.0. MEDIUM54
9'-4"
9'-4"
TM-1 15 SS CORNER/ END WALL CHANNEL GUARD, FULL HEIGHT. SEE 19/A6.3 & 5/A8.0. BOLD
2
5'-0" CL H.C. SIGN
5'-0" CL H.C. SIGN
16 NOT USED.
2
2 17 NOT USED.
INTERIOR
3'-121"
TM-1 TEMPERATURE SENSOR. SEE MECHANICAL DRAWINGS.
TM-1
WC-1
18 ELEVATIONS
WC-1 BOTTOM OF BEVERAGE AND ICE DISPENSING LEVERS SHALL BE NO HIGHER THAN 42"
10
10
WC-1 19 A.F.F.
DINING ROOM
24"x24" ART PANELS.
20
B-2
10
WC-1
10
WC-1
7 B-2 6 5 A8.0
PLOT DATE:
PASSAGE 3/8" = 1'-0" TILE BEHIND COUNTER 3/8"=1'-0" KEY NOTES A
8'-1012"
B-241
1'-5"
1'-6"
E 5
B-275 N-134 1. PROVIDE PROPER 2x BLOCKING AT WALL RECESSED
B-305 A6.3
MOUNTED ACCESSORIES.
B-265
5'-03 4"
1'-6" 2. GRAB BARS, FASTENERS AND MOUNTING DEVICES
6
MEN B-292 SHALL BE INSTALLED PER ADA REQUIREMENTS.
REFER TO SHEET ADA1.0.
7'-2"
B-300 7 A8.1 5
3. REFER TO FLOOR PLAN NOTES FOR BLOCKING AND
8'-6"
B-300
5 COURSES (TYP.)
2'-93 4" SUBSTRATE NOTES.
B-241
8 1'-4"
B-265
E
4. REFER TO SHEET ADA1.0 FOR MOUNTING HEIGHTS
AND CLEARANCES OF ACCESSORIES AND FIXTURES.
4"
N-134
2'-11
1'-71
2" 3'-0" 1'-51 4" WOMEN B-410 5. ALL DIMENSIONS THIS DRAWING ARE TO FINISH
18" MIN. B-275 SURFACE.
8'-714"
2
B-305
6. FOR DESCRIPTIONS, REFER TO ARTWORK
7" 2'-4" 1'-11" 3'-4"
(12" MIN.) SCHEDULE ON SHEET A2.0.
FIELD 1'-33 4" 3 A8.1 1
(12"MIN.)
FIELD FIELD 7. PROVIDE 1/4" MAX GAP AT ALL TOILET PARTITION
TILE BASE TILE BASE
1'-012"
TILE TILE BASE
TILE TILE
4'-312"
JOINTS.
4
(BOTH SIDES) PASSAGE
B-292
WOMEN'S RESTROOM 3/8"=1'-0"
7'-2"
ENLARGED RESTROOM / GENERAL NOTES 3/8"=1'-0" A
E G
F-131 F-050 U-054
F-060
S-220
3'-2"
8'-6"
E
F-090 CONSULTANT'S
F-014 F-040
F-211 F-080 SEAL
ADT
F-021
7 U-052
7'-914"
DEMARC
10
3'-4"
11 A8.1 9
OFFICE 6
FIELD TILE BASE
1'-312"
TILE 12 F-174
3
WOMEN'S RESTROOM 3/8"=1'-0"
7'-33 4"
FRP FRP FRP
F-211 F-050
11
11 C MISC. CHANGES 9.06.13
12
10
11 1
2 D MISC.CHANGES 10.25.13
9 3
8 4
7 5
6
E PROTOTYPE UPDATES 12.9.13
11
U-054 G PROTOTYPE UPDATES 1.30.14
F-270
2 F-060
13 G
8'-6"
8'-10"
12 12 12
7'-3"
5'-6"
5'-11"
DL-3
4'-0"
4'-0"
(BOTH SIDES) 1
3'-5"
CONTRACT DATE: XX.XX.XX
4 E
F-014 BUILDING TYPE: LIVE MAS MEDIUM54
FIELD FIELD FIELD TILE BASE PLAN VERSION: March 2013
TILE BASE TILE BASE
TILE TILE TILE F-174 SITE NUMBER: XXX-XXX
5 B-1 11 B-1 10 B-1 9 STORE NUMBER: XXXXX
MEN'S RESTROOM 3/8"=1'-0" FRP 9 TACO BELL
10
123 MAIN STREET
ANYTOWN, USA 98765
1 THERMOSTATS
2 LIGHTING CONTROL RELAY SWITCHES. SEE DETAIL 3/E3.1
3 TELEPHONE TERMINAL BOARD
8 8 8
4 HOLD UP BUTTON
12" X 12" PHONE DISTRIBUTION BOX: OWNER PROVIDED & INSTALLED.
LIVE MAS
5 MEDIUM54
8'-6"
5 COURSES (TYP.)
6 WIRING CABINET BY POS PROVIDER.
7 UNDER COUNTER KEYBOARD TRAY.
INTERIOR ELEV.
8 ELECTRIC PANELS.
ENLARGED
9 LIGHTING CONTROL RELAYS (CONTACTORS).
10 EXTERIOR LIGHTING CONTROL PANEL.
RESTROOMS &
11 SHELF BY G.C.- FINISH WITH PLASTIC LAMINATE DL-3.
OFFICE PLAN
12
A8.1
FIELD 12 COUNTER BY G.C. - FINISH WITH PLASTIC LAMINATE DL-3.
TILE TILE BASE B-1
WT-2 B-2 13 SMOKE DETECTOR WITH RESET SWITCH.
DL-1
(BOTH SIDES)
PLOT DATE:
MEN'S RESTROOM 3/8"=1'-0" OFFICE PLAN & ELEVATIONS / KEY NOTES 3/8"=1'-0" B
24 GREEN
FRP 22 19 E
FRP 21 21 1 2 12 E-275
18 4 1 19 6
U-238 FRP 3 FRP 10
U-238
U-239 23 U-239
S-513
U-024
G S-513 B-290 P-417
H
B-140
B-140
K-518 7
BOTT. OF HME MONITOR
4 K-132
G S-639
S-285 G S-285
8
8'-10"
8'-10"
R-034 U-100 E
U-100 U-100
6'-8"
P-541
7'-0"
U-061 (3)
OPEN
U-070 S-274
U-250 5
20
R-037 C-016 C-107
2'-8"
U-121
S-352 U-152
15
S-283 S-481
E
S-349 U-250 B-405
S-570 S-570 4
F-160 B-1 E N-150 B-241
B-1 S-482 S-274
U-100 S-349 N-053 B-251 GREEN GREEN
4 3 2 1
DRIVE-THRU 3/8" = 1'-0" DRIVE-THRU 3/8" = 1'-0" DRIVE-THRU 3/8" = 1'-0" TB COOK 3/8" = 1'-0"
ECO LAB UV FLY
CATCHER. G
G
(TYP)
P-452 LOCATE ELEC. STUB CONSULTANT'S
14 L-150 FRP FRP 7 FOR BUNN HERE K-210
G
SEAL
P-8
3" FRP
B-599 4
2'-6"
B-290
G
K-602 K-602 B-241
B-251 K-523 P-550
S-381 B-251
B-241 P-315
9 H H
8'-10"
OPEN
48" A.F.F.
MNT.
3'-8"
2'-8"
C MISC. CHANGES 9.06.13
B-219 N-053 D MISC.CHANGES 10.25.13
B-1 S-580 B-1
E
E
E PROTOTYPE UPDATES 12.9.13
S-580 B-223 17 N-071 N-208 E N-043 25 N-043 B-1 N-053 N-150 P-673 13 N-698 G PROTOTYPE UPDATES 1.30.14
N-130
N-171 H PROTOTYPE UPDATES 3.10.14
8 7 6 5
UTILITY 3/8" = 1'-0" WARE WASHING 3/8" = 1'-0" UTILITY 3/8"=1'-0" WARE WASHING 3/8" = 1'-0"
1 STAINLESS STEEL CHASE FOR SYRUP LINES & ICE MACHINE REFRIGERANT LINES. SEE DETAIL 19/A6.4
CONTRACT DATE: XX.XX.XX
2 ANSUL CABINET.
BUILDING TYPE: LIVE MAS MEDIUM54
3 DRIVE-THRU TIMER DISPLAY UNIT.
G
PLAN VERSION: March 2013
4 SS CORNER / END WALL CHANNEL GUARD, FULL HEIGHT. SEE DETAIL 19/A6.3.
SITE NUMBER: XXX-XXX
5 HOLD-UP BUTTON.
G STORE NUMBER: XXXXX
6 SS CORNER GUARDS AT PERIMETER OF D/T WINDOW. SEE DETAILS 5 & 8/A6.1 AND SCOPE OF WORK FOR RESPONSIBILITIES.
7 SPLASHGUARD. SEE DETAIL 9/A6.3.
TACO BELL
8 SS PANEL BEHIND HOOD.
123 MAIN STREET
9 ANSUL PULL STATION.
ANYTOWN, USA 98765
T E D K-602
H
K-523 K-522 K-602
H
K-602
H
10
11
J-BOX AND OUTLET INCLUDED WITH HOOD. INSET WITH FLUSH WITH FACE OF HOOD.
NOT USED.
E
8'-10"
L
12 GAS SHUT-OFF VALVE.
D E 13
14
15
FILTER FOR HOT WATER SYSTEM.
WATER HEATER FLUE. SEE PLUMBING DRAWINGS.
OPENING FINISHED WITH FRP FOR SYRUP TUBES. SEE DETAIL 11/A6.4. LIVE MAS
MEDIUM54
16 NOT USED
17 6" HIGH WATER HEATER PLATFORM.
18 ALERT LIGHT BOX FOR 3-COMP POWER SOAK. INTERIOR
19 CEILING MOUNT MONITOR BRACKET. SEE DETAIL 2/A6.3.
20 ADJACENT TABLE TOPS TO BE INSTALLED AT SAME LEVEL. ADJUST IN THE FIELD AS REQUIRED.
ELEVATIONS
21 RAISE INDICATED SECTION OF CEILING TO 8'-10". SEE SHEET A7.1. KITCHEN
10 9 22 DT TIMER SIGNAL PROCESSOR.
A8.2
23 DT TIMER MONITOR AND CONTROL UNIT.
24 DT TIMER ETNERNET SWITCH.
25 CUT WALL-HANGING TRACK TO ALLOW SPACE FOR CLICK&CLEAN SYSTEM
PLOT DATE:
DRY STORAGE 3/8" = 1'-0" KEY NOTES A
G
G
S-024
G P-332
P-332 S-023 C-250
S-065 S-023
S-024 20
C-201 C-201
OPEN S-546
C-201
S-544 C-201
U-061
H
U-070 U-070 F-160
K-490
P-332
U-152
ROOF TRUSS SYSTEM
CONSULTANT'S
FRAMING COVERED WITH
2 FRP SEAL
GYP. BD. AND FRP.
COORDINATE OPENING
SIZE WITH ROOF HATCH &
TRUSS SPACING. SEE DTL.
11/A6.3
SUSPENDED CEILING SUSPENDED CEILING
FRP WALL FINISH
S.S. WALL ENDCAP
BOTTOM OF FRAMED
ROOF ACCESS AT 8'-6" G
SUSPENDED CEILING
A.F.F.
BEYOND
MANAGER OFFICE INTERIOR EXTENSION WALL. EXTEND TO
D MISC.CHANGES 10.25.13
DOOR ROOF DECK TO ENCLOSE ROOF LADDER
G PROTOTYPE UPDATES 1.30.14
ALUMINUM ROOF LADDER - B-1 H PROTOTYPE UPDATES 3.10.14
SEE DETAIL 4/A6.0
B-049 B-050
A - ROOF LADDER VIEW
ROOF LEVEL &
HATCH SS CORNER / END WALL CHANNEL GUARD, FULL HEIGHT. SEE 19/A6.3.
CONTRACT DATE: XX.XX.XX
FAN MOTOR STARTERS, SURFACE MOUNTED. TYP. OF 2.
BUILDING TYPE: LIVE MAS MEDIUM54
FRP-1 HOLD-UP BUTTON PLAN VERSION: March 2013
UTILITY CHASE. SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
ROOF LADDER. SEE 7/A6.0.
5
TEMPERATURE SENSOR. SEE MECHANICAL DRAWINGS.
TACO BELL
SUSPENDED CEILING 123 MAIN STREET
ANYTOWN, USA 98765
4"
A A
LIVE MAS
G
8'-10"
MEDIUM54
1
FINISH FLOOR
PLOT DATE:
MIRROR MTD @ 40" A.F.F.
MAX TO BOTTOM OF
REFLECTING SURFACE
LAV.
LOG TOTING -
VERTICAL S.S. GRAB INSULATE HOT WATER & DRAIN
PROJECTS.
AIMTO MEET ALL STATE AND LOCAL
ANT A YUM!RBRANDS
PIPES DRYER
AND ADAPTED BY A LICENSED
TOTAL SEATS ACCESSIBLE SEATS BAR (IF RQ'D)
48" S.S. GRAB BAR
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
NOTES: PAPER TOWEL DISPENSER
TO P OR
FOR THIS BUILDING TYPE. THESE
1. TOP OF GRIPPING SURFACE T.S. COVER DISPENSER SHALL D
PULL STATION
IN
O
BE MOUNTED 1 1/2" (MIN.) 14" MIN. / 17" MAX.
ULTIMAGEBYELEMENTS
1 - 20 1 33" TO 36" MAX TO THE TOP OF D PROJECTION FROM
39" to 41"
'S PRIOR
THE BAR. SEE NOTES BELOW BELOW GRAB RAIL
WALL URINAL
21 - 40 2
AL
R PSITE-SPECIFIC
2. 12" MINIMUM CLEAR 6" TO 12" MAX
C ABOVE GRAB BAR
41 - 60
LO3
REGIONAL ARCHITECTURAL PARTNER (RAP)
36" S.S. GRAB BAR 2'-0"
TH D4 S
R
I
D
61 - 80
RIO
KITCHEN OPERATIONS MUST BE APPROVED
81 - 100Y
W AR 5 33" (EXCEPT @
TANK TOILETS,
D
CONSTRUCTION.
I F N WHICH SHALL BE
NSTHE
R - 120TA
H C EFOR
36")
V E101
S
6
7" - 8" 6"
MODIFICATIONS THAT CHANGE
9" D
JURISDICTIONAL REQUIREMENTS
121 - 140 7
DISREVIEWED
17"-19"
O
E WENGINEER
19" TO 48" A.F.F. FOR OPERABLE D 6" MAX. DEPTH x 30" MIN. WIDTH TOE
D
OPENING W/O OBSTRUCTION
L
CLEARANCE
THITEMPLATE
NUMBER OF ACCESSIBLE SEATS SWITCHES
C
10" MAX. 30" 30" 24" MAX. FROM GRAB BAR
T
8" MIN. DEPTH x 30" MIN.
THERMOSTAT
I
WIDTH KNEE SPACE
EPL MUST BE
CONTROLS MOUNTED ON
FIRE ALARM
ARCHITECT AND/OR
WIDE SIDE OF TOILET AREA
S
C
DOCUMENT
MOUNTING HTS. & CLEARANCES FOR ACCESSIBILITY BY THE DISABLED 1
A
N.T.S.
48" MAX.
D
46" MAX.
DRAWINGS
15" MIN.
34" MAX
THESE
6" MAX. (150)
R
PROTRUDING OBJECT
DOOR LOCATION
REM
12" MAX.
(305)
FREESTANDING OBJECT
ALTENATE
EXAMPLE: DRINK MACHINE, ETC. MOUNTED ON POSTS OR
28"-34" A.F.F.
PYLON MAY OVERHANG 12" D
4'-8" MIN. (1420) W. WALL
MAX FROM 27" TO 80" 17" MIN. TO
FLR. MOUNTED W.C.
4'-6" MIN. (1320)
MOUNTED W.C.
4'-11" MIN. (150) W.
ABOVE FINISH FLOOR 12" 18" MAX
18" MIN.
27"MIN.
4"
2'-8" MIN. (815)
24" MAX OBJECT PROJECTION FROM CLEAR
30" MIN.
WALL BETWEEN 27" TO 80" FLOOR
ABOVE FINISH FLOOR SHALL SPACE TOILET PAPER
80" MIN.
D
PROTRUDE NO MORE THAN
15" MIN.
(100)
OBSTRUCTION TO
36" MIN. CLR.
48" MAX. WITH NO
4" 4" MAX. VERTICAL GRAB
CONSULTANT'S
REACH OVER
BAR. SEE DTL 1
ACCESSIBLE ROUTE
4" MAX.
46" MAX.
30" MIN
D
SEAL
ELEVATION OBJECT PROJECTION
OTHER APPROACHES
FROM WALL LESS THAN 2'-8" MIN.
APPROACH ONLY,
48" MIN.
3'-6"MIN. LATCH
27" ABOVE FINISH FLOOR 13 1/2"
(815)
APPROACH
MAY PROTRUDE ANY MAX D
27"
CONDIMENTS AMOUNT
** IF TOILET STALL IS
FLOOR SHALL BE CONSTRUCTED OF SOLID WALLS
SLIP-RESISTANT SURFACE WITHOUT 9" OF TOE CLEARANCE
AND LEVEL WITH MAX 1/4" UNDER PARTITION, PROVIDE
CHANGE IN LEVEL ADDITIONAL 6" WIDTH AND DEPTH
SEATING AND TABLES N.T.S. 18 REACH RANGES N.T.S. 14 INT. ACCESS. ROUTE CLEARANCES 1/2" = 1'-0" 10 ACCESSIBLE URINAL 3/4" =1'-0" 6 STANDARD TOILET STALL N.T.S. 2
8" 8"
MAX. MAX.
18" MIN. FOR CALIFORNIA
REQ'D IN REQ'D IN
CA ONLY CA ONLY SIGN POST OBSTRUCTION
GRAB BAR SHALL BE 1-1/4" TO 2" MAX.,
15" MIN.
OUTSIDE DIA.- TYPICAL
D MISC.CHANGES 10.25.13
121"
48" MIN TO BOTTOM OF BRAILLE
CLEAR
30" MIN.
THE HIGHEST LINE OF TEXT
MIN. FLOOR
60" MAX TO BASELINE OF
12" MAX
TACTILE CHARACTERS
CLR. SPACE
17" MIN. D
2- 1/4"x3' EXPANSION ANCHORS AT
60"
60"
MASONRY OR CONC. WALL 2- #10x2"
27" MIN
SCREWS AT WOOD OR STEEL STUD
WALL-TYP.
48" MIN.
1/8"x2" BENT PLATE WELDED TO RAIL CONTRACT DATE: XX.XX.XX
AND1/8"x3" DIAMETER MOUNTING BUILDING TYPE: LIVE MAS MEDIUM54
ACCESSIBLE ROUTE WALK
PLATE @ 4'-0"
PLAN VERSION: March 2013
2"x6" BLOCKING AT WOOD STUD WALLS
(OMIT BLOCKING AT MASONRY OR SITE NUMBER: XXX-XXX
CONC. WALL) - TYPICAL
STORE NUMBER: XXXXX
ACCESSIBLE RESTROOM DOORS N.T.S. 15 PROTRUDING HAZARDS 1/2" = 1'-0" 11 GRAB BAR 3" - 1'-0" 7 ACCESSIBLE LAVATORY 3/4"=1'-0" 3
TACO BELL
19" 30"
1/4" MAX
D 1. INDICATED DIMENSIONS, HEIGHTS, DEPTHS, AREAS AND OTHER GRAPHIC
CLEAR
INFORMATION ARE PROVIDED AS MINIMUMS THAT MUST BE MAINTAINED. THESE 123 MAIN STREET
ACCESSIBLE ROUTE
MINIMUMS ARE BASED UPON YUM STANDARDS AND MAY EXCEED ADA ANYTOWN, USA 98765
MOUNT COAT HOOK ON
REINFORCED S.S. REQUIREMENTS.
INSIDE OF TOILET STALL
DOOR LATCH WITH THROUGH
CLEAR
BOLTED KEEPER. ADA THE DETAILS SHOWN ARE CONCEPTUAL ONLY AND INTENDED TO SHOW
30"
COMPLIANT ABSOLUTE MINIMUMS AND SHALL BE COORDINATED WITH THE OTHER
CONSTRUCTION DOCUMENTS ASSOCIATED WITH THIS PROJECT.
A L
C 2. 60" TURNING SPACE
LO
48" A.F.F MAX.
- PERMITTED OVERLAP LIMITED TO 1 ARM OF T-SHAPED SPACE
S.S. PULL (BOTH SIDES)
ON ALL ACCESSIBLE TH DS D
- CAN OVERLAP FIXTURE & DOOR CLEARANCE
LIVE MAS
I
W AR
- DOOR CAN SWING INTO TURNING SPACE A MAXIMUM OF 12" D
MEDIUM54
48" A.F.F MAX.
TOILET STALLS. MOUNT
FY ND
PULLS BELOW LATCH 3. RESTROOM, IN GENERAL, DOOR SWING MUST BE OUTSIDE OF THE FXTR CLEAR
AND KEEPER.
I FLOOR SPACE HOWEVER A DOOR CAN SWING INTO FIXTURE CLEAR FLOOR
1/4" - 1/2"
R A ACCESSIBLE ROUTE
VE ST
48" SPACE IF WHEELCHAIR SPACE 30"X48" IS PROVIDED BEYOND THE DOOR SWING.
BOBRICK OR CHRISTY
CLEAR
COMMERCIAL 19" 30" TOILET ROOM MUST ALLOW FOR SIDE TRANSFER - 42" BETWEEN FIXTURES
2 4.
HARDWARE & SUPPLY CLEAR
NOTE: DOOR HOOKS 1
WAREHOUSE
34" A.F.F MIN.
#039-6529 OR SIMILAR SHALL BE PLACED IN
ADA COMPLIANT HOOK. ACCESSIBLE STALLS
CLEAR
BETWEEN 40" MIN TO
30"
CHRISTYHARDWARE.COM 48" MAX ABOVE FINISH
877-544-5400 FLOOR
NOTE: SEE DOOR SCHEDULE. AND DOOR SCHEDULE NOTES NOTE: SEE DOOR SCHEDULE. AND DOOR SCHEDULE NOTES
NOTE: MAINTAIN 44" MIN. CLEAR AISLE EGRESS PATHS TO EXIT DOORS.
PLOT DATE:
COAT HOOK N.T.S. 20 PARTITION DOOR LATCH @ PULL 16 CHANGES IN LEVEL N.T.S. 12 DINING ROOM SEATING CLEARANCES N.T.S. 8 GENERAL NOTES 4
CLEAR FLOOR SPACE AT DOOR
D STRIKE SIDE
DOOR CLOSER IF
PROVIDED, SHALL THRESHOLD - SEE 32" MIN. ESCAPE LANE
HAVE AT LEAST A DETAILS 12, 14 / A6.1 CLR. OPENING
-
5-SECOND
LOG TO NG
PROJECTS.
CLOSING TIME
I TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
AND ADAPTED BY A LICENSED
PERIOD FROM 90
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
OPEN POSITION
O
R ELEMENTS
LATCH D
T'S PRIOR
18"
R PSITE-SPECIFIC
DOOR AND HARDWARE 24" REQ. IN
PER SHEET A1.1
MAIN STREET
PROVIDE ISA DECAL CA. FOR
REGIONAL ARCHITECTURAL PARTNER (RAP)
@ ALL PUBLIC EXTERIOR
60"
ACCESSIBLE D CLEAR SPACE FINISH ELEVATION TO
IMAGE
DOORS
MATCH FINISH FLOOR ELEVATION AT
RIO
ENTRANCES
KITCHEN OPERATIONS MUST BE APPROVED
DOOR D
CONSTRUCTION.
DOOR HANDLE,
L
SLIP RESISTANT SURFACE (MEDIUM
60"
NSTHE
SEE HARDWARE
ITH MEFOR
U
BROOM FINISH)
34" TO 44"
NOTES
MODIFICATIONS THAT CHANGE
JURISDICTIONAL REQUIREMENTS
EPL MUST BEISREVIEWED
O
E WENGINEER
D
CROSS SLOPE 1:50 OR 2% MAX.
A
D PATH OF TRAVEL
C
D
IN ALL DIRECTIONS.
L
REQUIRED FROM PUBLIC
THITEMPLATE
MIN.
C
10"
PUBLIC SIDEWALK
SIDEWALK TO
NOTE:
STORE ENTRANCE @ 5%
1. INTERIOR DOOR PRESSURE CANNOT EXCEED 5 LBS.
D
3'-0" DOOR WIDTH MAX. RUNNING SLOPE
ARCHITECT AND/OR
D
2. 60% OF PUBLIC ENTRANCES MUST BE ACCESSIBLE. (100% IN CA)
AND 2% MAX. CROSS
S
C
SLOPE (IN ANY
DOCUMENT
TYP. ENTRANCE / EXIT DOOR 17 EXTERIOR DOOR REQUIREMENTS 13
A
N.T.S. 1/2" = 1'-0" DIRECTION)
DRAWINGS
2%
THESE
D
60" MIN.
60" MIN.
8.3% 8.3%
MAX.
48" MIN.
48" MIN.
0.9"
R
MAX. MAX.
BASE DIAMETER
REM
0.45"
TOP DIAMETER
MIN. 60 DEGREE SLOPE
A A
BOTTOM RAIL OF DOOR
10" MIN.
2.35"
NO NO
NOMINAL PARKING PARKING
SEE DETAIL D
SPACING PLAN 12 / ADA1.0
NOTE FOR CALIFORNIA ONLY: WHERE A WALK CROSSES OR ADJOINS 11 CONSULTANT'S
1/2" MAX.
TOP DIAMETER A VEHICULAR WAY, AND THE WALKING SURFACES ARE NOT SEAL
SEPARATED BY CURBS, RAILINGS, OR OTHER ELEMENTS BETWEEN
D
THE PEDESTRIAN AREAS AND VEHICULAR AREAS, THE BOUNDRY
ASPHALT
HEIGHT
BASE DIAMETER
ALUMINUM THRESHOLD BETWEEN THE AREAS MUST BE DEFINED BY A CONTINUOUS, YELLOW,
0.2"
TAPER EDGE 36" WIDE DETECTABLE WARNING STRIPE THAT DIFFERS FROM
D
WHERE EXPOSED ADJOINING WALKING SURFACE IN RESILIENCY OR SOUND ON CANE
#10 S.M. IN PLASTIC CONTACT.
EXPANSION ANCHOR
SECTION A-A
TRUNCATED DOMES N.T.S. 18 BOTTOM RAIL (EXTERIOR DOOR) 3" = 1'-0" 14 EXTERIOR PATH OF TRAVEL N.T.S. 2
D
NOTE: 1:6 VAN
KEY NOTES ACCESSIBLE
1 WHEN DOOR SWINGS ONTO LANDING 42" MIN. PLUS DOOR WIDTH SPACES ARE 2% MAX.
REQUIRED. 8.3% MAX. 8.3% MAX. RETAINING CURB
2 MAXIMUM HORIZONTAL DISTANCE OF EACH RAMP & RUN VARY SLOPE
(IF NECESSARY) RAMPS DOWN WALKWAY <72" WIDE
AISLE MUST BE
3 72" FOR CALIFORNIA & 60" FOR REST OF COUNTRY POST MOUNTED ISA SIGN POST MOUNTED
60" MIN. WHEN NO ON PASSENGER ISA PARKING D MISC.CHANGES 10.25.13
WITH ADDITIONAL "VAN
4 HANDRAILS NOT REQUIRED ON WALKING SURFACES WITH RUNNING DOOR SWINGS ONTO SIDE ONLY. SIGN 1:12 1:12
ACCESSIBLE" LANGUAGE
SLOPES LESS THAN 1:20. LANDING WALKWAY 4' CLEAR MIN. MAX. MAX.
E2 E1
NOTE: ADHERE D
A L BOTTOM LANDING, 60" LONG,
ELEVATION 2% SLOPE, WITH A L RAMP DOWN. USE LEAST
SEE NOT SEE NOT TO LOCAL OR
C SMOOTH TRANSITION (NO 1/2 C POSSIBLE SLOPE, 8.3% MAX. BOTTOM LANDING 60" MIN.
LO LO
E2 .
SEE NOT 60" M IN
60" M STATE LIP)
72" MIN . IN.
TH DS TH DS
MUNICIPALITY IF REGULAR ACCESSIBLE D
DEPRESSED CURB RAMP
I I
D STALL, 8' WIDE, 18' LONG
MORE WHEEL-STOP (AWAY FROM
D D 3 RESTRICTIVE. W AR AISLE) W AR (9' WIDE IN CA)
TOP PLATFORM
F Y D F Y D
12" MIN.
AS RE
QUIR INTERMEDIATE LEVEL
R I A N DIAGONAL 3" STRIPES, 36"
R I A N 36" SQUARE ISA PAVEMENT
VE ST VE ST
12" MIN. ED PLATFORM O.C. WHITE OR BLUE SIGN
CENTERED AT
GUIDE RAIL
BOTTOM LEVEL PLATFORM PARKING AND AISLE SLOPE
NOTE: PROVIDE
D 2% MAX. IN ANY DIRECTION
4 STRAIGHT RAMP RUN WHEEL STOP
34" - 38"
WHERE NOTE: LOCAL MUNICIPALITY MAY HAVE
SIDEWALK IS VAN-ACCESSIBLE STALL, ADDITIONAL REQUIREMENTS FOR RAMPS CONTRACT DATE: XX.XX.XX
D
11' WIDE, 18' LONG THAT SHOULD BE REFERENCED.
LESS THAN 6'-0"
D LEFT OF ACCESS AISLE BUILDING TYPE: LIVE MAS MEDIUM54
18" MIN. EXTERIOR AND WIDE
INTERIOR BEYOND PLAN VERSION: March 2013
GUIDE RAIL GUIDE RAIL DETAIL D 11' MIN. 5' MIN. 8' MIN.
THE STRIKE EDGE OF A DEPRESSED CURB RAMP AT ACCESSIBLE PARKING (TYP.)
GATE OR DOOR ON THE SITE NUMBER: XXX-XXX
(1) VAN ACCESSIBLE STALL & (1) STANDARD ACCESSIBLE STALL
DOOR WDTH. PLUS 42"
SIDE TOWARD WHICH IT STORE NUMBER: XXXXX
SWINGS.
HANDRAIL HANDRAIL (24" REQUIRED IN CA FOR ACCESSIBLE PARKING STALL N.T.S. 11 CURB RAMPS N.T.S. 3
EXTERIOR DOORS)
& CURB & CURB
12"
TACO BELL
D
123 MAIN STREET
34" - 38"
34" - 38"
D ANYTOWN, USA 98765
18"
60" MIN.
48" MIN.
WHEEL GUIDE HANDICAP SIGN WALKWAY WALKWAY +8.9"
48"
60" MIN. WHEN NOT ON ACCESSIBLE ROUTE
+7.9"
DOWN
80" MIN. WHEN ON ACCESSIBLE ROUTE
2% CROSS
L L
2%
WHEEL GUIDE WHEEL GUIDE DETAIL RAMP LANDING AT DOORWAY SLOPE
A
NOTE: VAN ACCESSIBLE
C
D
C A
O
SIGN NOT REQUIRED ON
LO
95" MIN.
L
DOWN
UNIVERSAL OR STANDARD 10% AT
95"
8.3%
NOTE 1: NOTE 2:
TH
STALLS. S TH DS CURB
LIVE MAS
* WHEN DOOR SWINGS WHEN NO DOOR
WHEN DOOR SWINGS
ONTO LANDING 42"
MAXIMUM HORIZONTAL
DISTANCE OF GEACH
60" MIN. WHEN NO
DOOR SWINGS ONTO
I
W AR D I
W AR
WALKWAY
MEDIUM54
ONTO LANDING - 42" SWINGS ONTO
MIN. PLUS DOOR WIDTH RAMP AND RUN VARY LANDING Y
F METAL D F Y D
MIN. PLUS DOOR
I N I N
24"
LANDING.
WIDTH. R TA SIGN POST
GALVANIZED R A 0.0" PARKING
VE ST
60" MIN. 2
E
V S +6.0" +1.2"
DOWN
2 1 6" CURB
* TOP PLATFORM 48" WIDE RAMP
SEE NOT
E 60" MIN.
5%
(0.0" PREFERRED)
72" MIN. 60" M FINISH GRADE SLOPED AT
60" M
IN. 72" MIN. IN.
8.3% MAX. TYP. CURB CUT ELEVATIONS
3
3 D
NOTE:
SIDE FLARES
SLOPED PARKING
D BUILT-UP ACCESSIBILITY
DETAIL IS MEANT AS A GENERAL GUIDELINE. REFER TO AT 10% MAX. D CURB RAMPS NOT ALLOWED
AS RE
INTERMEDIATE LEVEL LOCAL MUNICIPALITY FOR SIGN TYPE, VERBAGE AND REQUIREMENTS
2'-0"
AS RE
Q UIRED 72" MIN. Q UIRED
PLATFORM
CONCRETE
DIMENSIONS. NOTE: LOCAL MUNICIPALITY MAY HAVE
D
3 INTERMEDIATE LEVEL ADDITIONAL REQUIREMENTS FOR RAMPS
72" M NOTE: THAT SHOULD BE REFERENCED.
NOTE: MAXIMUM HORIZONTAL DISTANCES IN. U IR E D TURNING PLATFORM
3 AS R EQ SIGNS SHALL BE LOCATED SO THAT THEY
OF EACH RAMP AND RUN VARY.
CANNOT BE OBSCURED BY A VEHICLE PARKED IN
3"
4 RAMP WITH INTERMEDIATE SWITCH BACK PLATFORM 4 RAMP WITH TURNING PLATFORM THE SPACE. CURB CUT AT ACCESSIBLE PARKING
1'-0"
PLOT DATE:
RAMPS N.T.S. 16 ACCESSIBLE PARKING SIGN N.T.S. 12 CURB RAMPS N.T.S. 4
GENERAL: FAN DATA COOLING CAPACITY HEATING CAPACITY UNIT ELECT DATA
MAX
MANUFACTURER
1. LOCATE, CUT AND FRAME ROOF OPENINGS AS SHOWN FOR ALL HVAC EQUIPMENT AND EXHAUST FANS. MIN CAP INPUT UNIT
XX-XXX AREA SERVED SUPPLY MIN O.A. NOM MIN OUTPUT PHASE VOLTS/ AND REMARKS
ESP HP RPM (MBH) STAGE AFUE MCA MOPD WEIGHT
LOG TO NG -
CFM CFM TONS EER (MBld) (STAGES) PH MODEL NUMBER
2. IT IS VERY IMPORTANT THAT ACCURATE MEASUREMENTS ARE USED WHEN LOCATING EXHAUST FAN ROOF OPENINGS TO ENSURE THAT NO ADDITIONAL OFF-SETS ARE REQUIRED IN THE EXHAUST DUCTWORK. COORDINATE ROOF MARK TOT/SEN (MBH) (LBS)
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
OPENINGS WITH THE KITCHEN EQUIPMENT.
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
TRANE
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
RTU-1 DINING 3400 750 1.0" 2 1317 8.5 103/80 13.0 120 96.0 1 81 208/3 44.7 60 1537 SEE NOTES 1,2,3 & 5
FOR THIS BUILDING TYPE. THESE
3. PROVIDE ANY FRAMING REQUIRED FOR DIFFUSER INSTALLATION IN HARD CEILING. YHC102E3RLA
O
R ELEMENTS
TRANE
RTU-2 KITCHEN 4400 450 1.0" 3 596 12.5 145.6/107.5 12.1 250 203.0 2 81 208/3 74 80 2761 SEE NOTES 1,2,3 & 5
T'S PRIOR
HVAC: YHD150F3RLA
R PSITE-SPECIFIC
YORK
RTU-1 (ALT) DINING 3400 750 1.0" 3 1032 8.5 106/77 12.0 180 144 2 80 208/3 41.3 50 1595 SEE NOTES 1,2,3 & 5
1. INSTALLATION SHALL CONFORM TO THE ENERGY CONSERVATION DESIGN MANUAL STANDARDS FOR NEW NONRESIDENTIAL BUILDINGS. ZJ102N15R2M
REGIONAL ARCHITECTURAL PARTNER (RAP)
YORK
2. ALL WORK AND MATERIALS SHALL COMPLY WITH GOVERNING CODES, SAFETY ORDERS AND REGULATIONS. RTU-2 (ALT) KITCHEN 4400 450 1.0" 5 1223 12.5 164.2/111.7 12.0 240 192 2 80 208/3 73.2 90 1850 SEE NOTES 1,2,3 & 5
IMAGE
ZJ150N20R2M
RIO
KITCHEN OPERATIONS MUST BE APPROVED
3. OBTAIN AND PAY FOR ALL NECESSARY PERMITS, FEES AND INSPECTIONS REQUIRED BY GOVERNING AUTHORITIES.
CONSTRUCTION.
L
NSTHE
4. E.C. SHALL PROVIDE CONDUIT FOR LINE AND LOW VOLTAGE WIRING, LINE VOLTAGE WIRING SWITCHES, AND FINAL CONNECTIONS. M.C. SHALL PROVIDE 24V CONTROL WIRING AND FINAL CONNECTIONS. SCHEDULE NOTES:
ITH MEFOR
U
1. LISTED CAPACITY IS THE STANDARD UNIT'S GROSS COOLING CAPACITY AT 80 DEG. F. DB / 67 DEG. F. WB EAT AND 95 DEG. F. AMBIENT. OUTDOOR DESIGN CONDITION, SUMMER 95 DEG. F. & 74 DEG. F WB, WINTER 17 DEG. F. (ARI
5. ANY EQUIPMENT THAT IS SUBSTITUTED SHALL FIT IN THE SPACE PROVIDED WITH ADEQUATE ROOM FOR SERVICING, INCLUDING SUBSTITUTE EQUIPMENT NAMED IN THE SPECIFICATIONS. SUBMIT A 1/4" SCALE DRAWING OF ALL STANDARD CONDITIONS). THERMOSTAT SHALL BE PROGRAMMED FOR 73 DEG. F IN SUMMER AND 68 DEG. F IN WINTER WITH 2 DEG ADJ. FUNCTION UP OR DOWN. THE UNOCCUPIED TEMP SHALL BE SET TO THE STORE SCHEDULE
MODIFICATIONS THAT CHANGE
JURISDICTIONAL REQUIREMENTS
EQUIPMENT SUBSTITUTED FOR APPROVAL PRIOR TO INSTALLATION, INCLUDING, BUT NOT LIMINTED TO, STRUCTURAL AND ARCHITECTURAL IMPACT, CLEARANCE REQUIREMENTS AND UTILITY REQUIREMENTS. AND 60 DEG. F MINIMUM.
O
CE WENGINEER
2. SPECIFIED RTUS ARE DOWN DISCHARGE PACKAGED GAS / ELECTRIC ROOFTOP UNITS WITH MINUMUM 2-STAGE COOLING. INCLUDES THROUGH THE ROOF CURB POWER, GAS & CONDENSATE DRAIN. GAS PIPING SHALL BE FACTORY
I
C
6. FOR INSTALLATION OF RECHARGEABLE REFRIGERANT LINES FROM ICE MACHINE TO CONDENSER ON ROOF, SEE SCOPE OF WORK. PIPED WITH SHUT-OFF OUTSIDE OF UNIT.
3. SPECIFIED UNIT INCLUDES HINGED ACCESS DOORS, 2" PLEATED FILTERS, LOW AMBIENT CONTROL TO 0 DEG. F., MOTORIZED OUTDOOR AIR DAMPER, CIRCUIT BREAKER WITH SINGLE POINT WIRING, HAIL GUARD, AND FACTORY
THITEMPLATE
7. HVAC UNITS SHALL BE MOUNTED LEVEL ON ROOF CURBS. FABRICATED, KNOCK DOWN ROOF CURB.
MUST BEIS
4. SPECIFIED UNIT INCLUDES FACTORY INSTALLED HOT GAS REHEAT OPTION INCLUDING REMOTE MOUNTED TEMPERATURE AND HUMIDITY SENSORS AS INDICATED ON THE DRAWINGS.
D
8. ALL SUPPLY / RETURN DUCTWORK SHALL BE EXTERNALLY INSULATED. 5. SPECIFIED UNIT INCLUDES SUPPLY AIR TEMPERING CONTROL
ARCHITECT AND/OR
6. PROJECT LOCATIONS NEAR COASTAL AREAS MAY REQUIRE EPOXY COATED COILS.
S
9. ALL SUPPLY / RETURN DUCTS SHALL BE RIGID, WITH THE EXCEPTION OF THE LAST 14'-0", WHICH MAY BE FLEX. 7. SPECIFIED RTUS SHALL BE SUPPLIED WITH OVERSIZED INDOOR FAN MOTOR AND EVAPORATOR MOTOR
DOCUMENT
8. "XDX" VALVES ARE NOT REQUIRED ON ALL ROOF TOP AIR CONDITIONING UNITS.
PLA
10. SMOKE DETECTOR SHALL BE INSTALLED IN THE RETURN AIR DUCT, PRIOR TO ANY OUTSIDE AIR CONNECTIONS, AND SHALL DEACTIVATE ROOFTOP UNIT UPON SENSING SMOKE. INCLUDE SMOKE DETECTOR IN THE SUPPLY AIR DUCT
DRAWINGS
ONLY IF REQUIRED BY LOCAL CODE. DESIGNER NOTE: HOT GAS REHEAT OPTION WITH HUMIDITY SENSOR TO BE USED IN HIGH HUMIDITY LOCATIONS (W.B. GREATER THAN 74 DEGREES).
THESE
E
11. ALL HOOD EXHAUST DUCTS SHALL BE RIGID 16 GA MINIMUM, WELDED DUCT. GRIND ALL WELDS SMOOTH. PROVIDE 3M FIRE BARRIER DUCT WRAP FOR ALL HOOD EXHAUST DUCTS. SEE 15/M4.0.
R
REM
12. ALL BRANCH DUCTS FEEDING INDIVIDUAL DIFFUSERS SHALL HAVE DAMPERS AT TAKEOFFS FOR AIR BALANCING. PROVIDE ACCESS PANELS TO DAMPERS. SEE 8/M4.0.
13. ALL UTILITY PIPING FOR RTU'S SHALL RUN UP THROUGH ROOF INSIDE EACH UNIT'S ROOF CURB. HVAC UNIT SCHEDULE 1
14. ALL OUTSIDE AIR INTAKES SHALL BE A MINIMUM OF 10'-0" FROM EXHAUST FANS AND / OR VENTS. REMARKS:
ACCESSORIES
1. UL 762 LISTED (GREASE)
STARTER
15. SEE 8/M1.0 AND SCOPE OF WORK FOR DESCRIPTION OF HVAC PACKAGE TO BE PURCHASED THROUGH YUM! BRANDS NATIONAL CONTRACT. MANUFACTURER 2. STVT-CURB, MODEL # CURB23X26E
SCREEN
V-BELT
XX-XXX CFM SP RPM HP ELECT AND REMARKS 3. FLAT ROOF CURB
D-DR
DISC
BIRD
BDD
16. FINAL HVAC SYSTEM TESTING AND BALANCING SHALL BE PERFORMED BY INDEPENDENT AGENT CONTRACTED DIRECTLY BY THE OWNER. A RE-TEST IS MANDATORY FOR A FALSE START (I.E. NO POWER UPON AGENT'S ARRIVAL, MODEL NUMBER 4. GREASE TROUGH
EQUIPMENT NOT WIRED, ETC.) AND SHALL BE A COST INCURRED BY THE G.C. IN THE EVENT A SYSTEM / STORE RECEIVES A GRADE OF 5 OR BELOW AS A RESULT OF THE HVAC SYSTEM PERFORMANCE OR OPERATIONAL MARK 5. HINGED SUB-BASE OR KIT
DEFICIENCIES, OWNER WILL REQUEST A RE-TEST AND THE COST FOR SAME SHALL BE ALSO INCURRED BY THE GENERAL CONTRACTOR. 6. WEATHERPROOF PRE-WIRED DISCONNECT SWITCH
STRATOVENT 7. PROVIDE PRE-WIRED SOLID STATE SPEED CONTROLLER
17. VENSTAR THEMOSTAT & TEMP SENSOR, PROVIDED WITH TRANE PACKAGE. USE T-CONT 802 WITH RTUS W/O DE-HUMIDICATION. USE T-CONT 803 WITH RTUS W/ RTUS W/ DE-HUMIDIFICATION. EF-1 675 0.9 1531 .75 120/1 - X X X SEE NOTES 1,2,3,6,7, & 8
GREEN #SV33 8. BACKDRAFT DAMPER-TRAY
18. TRANE DUCT MOUNTED HUMIDITY SENSOR MODEL #BAYSENS037A, PROVIDED WITH TRANE PACKAGE. YORK HUMIDISTAT MODEL #2DH04700024, PROVIDED WITH YORK PACKAGE. EF-2 500 .375 1426 0.18 120/1 - X X X X
STRATOVENT
SEE NOTES 3,6,7, & 8 CONSULTANT'S
#SVDR12
SEAL
GENERAL NOTES 10
SYMBOL & ABBREV. DESCRIPTION SYMBOL & ABBREV. DESCRIPTION
SA/SUP SUPPLY AIR (RISE/DROP) A/C , AC AIR CONDITIONING SUPPLY AND EXHAUST FAN SCHEDULE 2
RA/RET RETURN AIR DUCT (RISE/DROP) BDD BACK DRAFT DAMPER
TYPE (NO.) & AIR MOUNTING DUTY MATERIAL
EA/EXH EXHAUST AIR DUCT (RISE/DROP) CB CIRCUIT BREAKER DIFFUSER FACE
QUANTITY
PATTERN
ALUMINUM
REGISTER
DIFFUSER
SURFACE
EXHAUST
NECK OR
RETURN
SUPPLY
CEILING DIFFUSER/SUPPLY REGISTER
LAY-IN
STEEL
XX-XXX MANUFACTURER MODEL NUMBER REMARKS
GRILL
CD/SR CLG. CEILING
(ARROWHEAD REPRESENTS NUMBER OF THROW) SIZE CEILING GRID
CFM
CONN. CONNECT/CONNECTION MARK SIZE
RANGE
RR/RG RETURN REGISTER/GRILLE CONT. CONTINUATION
(7)4W
CONT'R CONTRACTOR S-1 12 15x15 24x24 X X X METAL-AIRE / TITUS 5000-6 / TDC-AA FRN SQR TO RND ADAPTER
ER/EG EXHAUST REGISTER/GRILLE 0-500
CFM CUBIC FEET PER MINUTE
RECTANGULAR DUCT ELBOW WITH TURNING VANES
DET. DETAIL
FC FLEXIBLE CONNECTION (3)2W
DISC. DISCONNECT S-3 3 9x9 14x14 X X X METAL-AIRE / TITUS 5000-1 / TDC-AA FRN SQR TO RND ADAPTER
0-250
MVD MANUAL VOLUME DAMPER
DTR DOWN THRU ROOF VERT D
S-4 4 12 24x24 X X X X HART & COOLEY RZMCDST PLASTIC MODULAR CORE
FD FIRE DAMPER 300-700
EF EXHAUST FAN
D MISC.CHANGES 10.25.13
(L) DUCT LINING (1" THICK UNLESS OTHERWISE NOTED)
(E) EXISTING
SINGLE LINE DUCT BRANCH TAKEOFF
GA. GAGE/GAUGE
DUCT TRANSITION (RECTANGULAR TO ROUND)
GC GENERAL CONTRACTOR
FLEX FLEXIBLE DUCT (14'-0 MAXIMUM) (4) 4W
HVAC HEATING, VENTILATING, AND AIR CONDITIONING R-1 5 22x22 24x24 X X X X METAL-AIRE / TITUS CC5-FB-TB / 50FF FULLY REMOVABLE FACE
0-2000
T T-STAT PROGRAMMABLE THERMOSTAT, PROVIDED WITH TRANE PACKAGE.
MFR. MANUFACTURER
TS THERMOSTAT SENSOR (REMOTE), PROIVDED WITH TRANE PACKAGE.
MECH. MECHANICAL
H HUMIDITY SENSOR (REMOTE), PROVIDED WITH TRANE PACKAGE. (2) 4W
E-1 2 8x8 X X X X METAL-AIRE / TITUS CC50 / 50F FRN SQR TO RND ADAPTER
(N) NEW 0-150
D D CONDENSATE DRAIN CONTRACT DATE: XX.XX.XX
OA/OSA OUTSIDE AIR NO DIREC.
DIA. DIAMETER E-2 1 8x8 24x24 X X X METAL-AIRE / TITUS CC5-FB-TB / 50F-NT PROVIDE 2'x2' LAY-IN PANEL
0-200 BUILDING TYPE: LIVE MAS MEDIUM54
OBD OPPOSED BLADE DAMPER
DL DL DOOR LOUVER PLAN VERSION: March 2013
S/S STAINLESS STEEL NOTES:
UC UC DOOR UNDERCUT (3/4" MINIMUM) DIFFUSERS IN SURFACE MOUNTED CEILINGS SHALL BE PROVIDED WITH OPPOSED BLADE DAMPERS. SEE ARCHITECTURAL DRAWINGS FOR CEILING TYPES. SITE NUMBER: XXX-XXX
TYP. TYPICAL
UON UNLESS OTHERWISE NOTED STORE NUMBER: XXXXX
X-X 0000 MECHANICAL EQUIPMENT DESIGNATION
UTR UP THRU ROOF AIR DEVICE SCHEDULE 3
R RESET SMOKE DETECTOR RESET TACO BELL
FOR COMPLETE INFORMATION AND PRICING ON THE TRANE HVAC PACKAGE CONTACT 123 MAIN STREET
MARTY CUSICK, THE YUM! BRANDS ACCOUNT EXECUTIVE AT TRANE NATIONAL
ACCOUNTS. ITEM OA RA SA EA PRESSURE ANYTOWN, USA 98765
TOLL-FREE PHONE: (866) YUM-HVAC or (866) 986-4822
FAX: (502) 499-7870
EMAIL: [email protected]
D
TACO BELL HAS A NOTIONAL HVAC AGREEMENT WITH YORK NATIONAL ACCOUNTS.
FOR QUOTES & TECHNICAL SPECIFICATIONS, PLEASE CONTACT MATT MCNAIR, YORK EF-1 -- -- -- 675 -675
PRODUCT APPLICATION ENGINEER AT 800-481-9738, FAX 866-406-9675. FOR ALL OTHER
INQUIRIES, PLEASE CONTACT NATALIE DEROUSSE, YORK NATIONAL ACCOUNT SALES
MANAGER AT 405-419-6416. EF-2 -- -- -- 500 -500
TRANE AND YORK HAVE AGREED TO SUPPLY AN HVAC PACKAGE CONSISTING OF THE
ROOF-TOP UNITS, CURBS, THERMOSTATS, TEMPERATURE SENSORS (REMOTE), AND LIVE MAS
HUMIDITY SENSORS (REMOTE). RTU'S AS SPECIFIED INCLUDE AN UNPOWERED MEDIUM54
CONVENIENCE OUTLET (SEE ELECTRICAL) AND AN HACR CIRCUIT BREAKER WHICH
PROVIDES UNIT DISCONNECT. TRANE AND YORK ALSO HAVE AVAILABLE OPTION
PACKAGES WHICH INCLUDE SMOKE DETECTORS AND ANNUNCIATORS,
ECONOMIZERS, AND RTU VARIATIONS SUCH AS HIGH-EFFICIENCY MODELS.
BE PREPARED AT TIME OF ORDER OR QUOTE REQUEST TO PROVIDE ALL PROJECT
RTU-1 750 2650 3400 -- +750
D MECHANICAL
DETAILS REGARDING SPECIFICATIONS AND QUANTITIES AS SITE SPECIFIC DESIGN MAY
NOT MATCH NATIONAL DESIGN. RTU-2 475 4725 5200 -- +475
SCHEDULES
SEE THE SCOPE OF WORK SHEETS FOR ADDITIONAL INFORMATION.
AND NOTES
TOTAL 1200 7400 8600 1125 +100
NOTE:
\pt0.28125;1. THE OUTSIDE PERCENTAGE OF TOTAL SUPPLY AIR IS 17.4%
M1.0
PLOT DATE:
MECHANICAL SYMBOLS 12 TRANE PACKAGE N.T.S. 8 AIR BALANCE SCHEDULE CFM 4
F
S-1 350 10 R 19
EF-1 ON ROOF 9 C
16
S-1 500 S-1 450 G
R-1 1450
VD 8x8 VD 10x4
24x14
13
(TYP) R-1 1475 10x10
D
RTU-2 ON S-3 125
14 S-4 600
S ROOF
8 TYP. OF 4
5
14x12
26x14
S-1 500 8 S S-1 275
11 17
VD R-1 1475
C
VD
S-1 200 CONSULTANT'S
SD VD VD
S-1 500
SEAL
R-1 1300 16x14 14x8
6
VD 7 VD
17
S-1 400
SD VD VD 24x16 C
E-1 200 8x8
R-1 1300 7 EF-2 ON ROOF
13 8x10
8x8 14
RTU-1 ON ROOF VD S
8x6 S-1 200
14
2 S-1 500 10
S S 1
(TYPICAL) S-3 100 8x8 E-1 200
14x10
S-1 500
S-1 200
11
S
S-1 500
S-3 100 B
S-1 200
18 D MISC.CHANGES 10.25.13
G PROTOTYPE UPDATES 1.30.14
A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
DUCT AND DIFFUSER PLAN 1/4"=1'-0" A
13 SUPPLY AIR DUCTWORK RUN THROUGH OPEN WEBBING OF ROOF TRUSSES.
TACO BELL
1. DINING ROOM LIGHT FIXTURE LOCATIONS ARE CRITICAL. COORDINATE 1 10x10 EXHAUST AIR DUCT UP TO EF-2 ON ROOF, 300 CFM.
DUCTWORK LOCATIONS SO AS NOT TO CONFLICT WITH LIGHT FIXTURE COORDINATE LOCATION OF DUCTWORK WITH ROOF TRUSSES INSTALLED.
LOCATIONS. 2 SEE DETAIL 8 ON DRAWING M4.0 FOR SUPPLY AIR TAKE-OFF TO CEILING DIFFUSERS. 123 MAIN STREET
RETURN OR EXHAUST AIR TAKE-OFFS SHALL BE SIMILAR. 14 SUPPLY OR EXHAUST DUCTWORK RUN UP BETWEEN ROOF TRUSSES. ANYTOWN, USA 98765
2. THERMOSTATS SHALL BE PROGRAMMABLE THERMOSTAT WITH SUBBASE.
REMOTE TEMPERATURE SENSOR, AND REMOTE HUMIDITY SENSOR. (PROVIDED 34x18 SUPPLY AIR DUCT UP, 3400 CFM. CONNECT TO SUPPLY AIR PLENUM AT ROOFTOP 15 NOT USED.
3
WITH TRANE PACKAGE). UNIT RTU-1.
16 8"x8" EXHAUST AIR DUCT DOWN TO 8"x8" EXHAUST CONNECTION AT HOOD. 8"x8"
3. HUMIDITY SENSOR APPLICATION IS VARIABLE PER SITE SPECIFIC CONDITIONS. 34x18 RETURN AIR DUCT UP, 2650 CFM. CONNECT TO RETURN AIR PLENUM AT ROOFTOP EXHAUST DUCT SHALL RUN BETWEEN ROOF TRUSSES TO CONNECT TO ROOF
4
REFER TO HVAC UNIT SCHEDULE, 1/M1.0, FOR APPLICATION CONDITIONS. UNIT RTU-1. EXHAUST FAN EF-1. SEE HOOD DETAILS ON DRAWING M3.0. SEE DETAIL 15 ON
SHEET M4.0 FOR FIRE PROTECTION OF DUCT WORK. SEE DETAIL 5 ON SHEET M4.0
5 36x20 SUPPLY AIR DUCT UP, 4400 CFM. CONNECT TO SUPPLY AIR PLENUM AT ROOFTOP FOR EXHAUST DUCT TRANSITION.
UNIT RTU-2.
6 34x20 RETURN AIR DUCT UP, 3950 CFM. CONNECT TO RETURN AIR PLENUM AT ROOFTOP
17
18
DROP DOWN 14"x4" SUPPLY AIR DUCT BETWEEN STUDS.
FURNISH AND INSTALL 3" PVC WATER HEATER INTAKE AND FLUE VENT TERMINATION
LIVE MAS
UNIT RTU-2. MEDIUM54
ON ROOF. COORDINATE WORK WITH ALL TRADES.
7 FURNISH AND INSTALL SMOKE DETECTOR IN THE RETURN AIR DUCT, IN ACCORDANCE
WITH LOCAL CODES. DUCT SMOKE DETECTOR WIRED BY ELECTRICAL CONTRACTOR, 19 NEW SMOKE DETECTOR RESET SWITCH WITH KEY. MFR. IS "SYSTEM SENSOR"
MODEL # RT5151 KEY. MOUNT NEXT TO THERMOSTATS @ 48" A.F.F. - INSTALL PER
SEE SHEET E3.2.
MFR. SPECIFICATIONS. DUCT AND
8 HUMIDITY SENSOR (REMOTE). HUMIDITY SENSOR LOCATION SHALL BE PLACED IN G
RETURN AIR DUCTWORK. VERIFY EXACT LOCATION. SEE 9/M4.0. 20 ACCESS OPENING TO SPACE ABOVE WALK-IN. SEE SHEET A7.1.
DIFFUSER
9 LOCATE THERMOSTAT CONTROLS ON WALL IN OFFICE AT 48" A.F.F. COORD LOCATION 21 AIR TRANSFER GRILLS. SEE SECTION "B" ON SHEET A5.2.
WITH LIGHT SWITCHES. PLAN
10 MOUNT THERMOSTAT REMOTE SENSOR AT 60" ABOVE FINISHED FLOOR.
M2.0
11 UNDERCUT RESTROOM DOORS AND OFFICE DOOR MIN. 3/4" FOR MAKE-UP AIR.
12 PROVIDE FLEXIBLE METAL DUCTWORK FOR EXHAUST DUCT CONNECTIONS TO EXHAUST
GRILLES AND MAIN EXHAUST DUCT.
PLOT DATE:
NOT USED F GENERAL NOTES E KEY NOTES B
NOTES:
HOOD # 1 OF 1 MODEL # STRATOVENT SVBD2 - ALL EXPOSED SURFACES TO BE STAINLESS STEEL.
- HOOD IS PREPIPED FOR ANSUL.
-
LENGTH (IN): 4'-6" WIDTH (IN): 36" HEIGHT (IN): 14" - ETL LISTED TO UL-710 STANDARDS, 3054804-001
LOG TO NG
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
EXHAUST CFM: 675 SUPPLY CFM: BY RTU - 20 GAUGE MINIMUM S/S ON EXPOSED SURFACES PER NFPA.
REVIEWED AND ADAPTED BY A LICENSED
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
EXHAUST SP: 0.9" (HOOD+DUCT) SUPPLY SP: NA
O
1/2" DIA. ALL THREAD ROD STEEL HANGING ANGLE
R ELEMENTS
EXHAUST FPM: 1519 SUPPLY FPM: NA CONNECTED TO ROOF JOIST
T'S PRIOR
THROUGH ANOTHER
INSTALLATION: DUCT TEMPERATURE SWITCH - NORMALLY OPEN CONTACT, CLOSES EXH. SIZE: 8"X8" SUP SIZE: NA
HANGING ANGLE
REVISED: 02-15-2012
R PSITE-SPECIFIC
PROJECT: TACO BELL
1.5 GA. R102
SENSOR DETAIL ON TEMPERATURE RISE ABOVE 85F.
ANSUL SYSTEM FIELD CUT FILTERS: ( 2 ) 16" X 16" FILTERS: ( 1 ) 16" X 20"
- FIELD WIRED AS SAFETY SWITCH, TO
REGIONAL ARCHITECTURAL PARTNER (RAP)
1/2" DIA. HEAVY DUTY NUT
APPROX
System Size: ANSUL-1.5 Gallons Total, R102 AND WASHER - ONE ABOVE
1W FIRE SUPPRESSION: ANSUL-R102 FILTER TYPE: STAINLESS BAFFLE AND ONE BELOW HANGING ANGLE
Flow Points: 5 Design, 5 (max) ENERGIZE HOOD EXHAUST FANS
2'-0"
IMAGE
1N TOTAL WEIGHT OF
RIO
LIGHT QTY: ( 2 ) INCANDESCENT/CFL CONTROL SWITCH: BLDG WIRING
KITCHEN OPERATIONS MUST BE APPROVED
5 FLOW
Hood #1: 4'-6" L x 36" W x 14" H
POINTS
WHEN COOKING EQUIPMENT IS HOOD 1: 250 LBS.
ROD, NUTS, AND WASHERS TO BE SUPPLIED BY INSTALLING CONTRACTOR
Exhaust Riser Size: 8" x 8"
ACTIVATED. HANGING ANGLE IS PRE-PUNCHED AT FACTORY
CONSTRUCTION.
3N-S
L
FAN CONTROL CIRCUIT
NSTHE
-WIRED IN PARALLEL TO NORMAL
ITH MEFOR
U
10" 3'-8"
CONTROL CIRCUIT.
LOW-PROFILE HOOD
4'-6" DUCT SENSOR 5" TYPICAL.
MODIFICATIONS THAT CHANGE
DUAL POWER OUTLET, 115V/1PH
FACTORY PIPING J-BOX TIE-IN ON TOP OF HOOD.
JURISDICTIONAL REQUIREMENTS
O
FIELD PIPING
CE WENGINEER
3" INTEGRAL REAR STAND-OFF. FACTORY FIELD CUT
PLAN VIEW
I
C
INSULATED. HOOD ASSEBMLY IS LISTED
AND LABELED FOR ZERO CLEARANCE TO
THITEMPLATE
TIMER MOUNTING CHANNEL
EXTERNAL SURFACE
COMBUSTIBLE IN THE REAR.
3"
MUST BEIS
OF DUCT OR HOOD PLENUM UL LISTED LIGHT 42"
0.50" QUIK SEAL
4'-6" AREA (BEHIND FILTERS).
D
(ADAPTER BODY) FIXTURES.,
ARCHITECT AND/OR
HOOD DETAIL 1. FACTORY J-BOX.
NOTES
S
- FIELD PIPE DROPS AS SHOWN: SLEEVING, ELBOWS, TEES, AND
PLAN VIEW
DOCUMENT
NOZZLES SUPPLIED BY STRATOVENT FOR HOOD-BASED PIPING. 1W
P LA
- RELOCATE NOZZLES IF FLOW PATTERN IS BLOCKED. 1A 2
1.125" - 1.250" DIAM. HOLE
TOP OF S/S BACKSPLASH.
DRAWINGS
- MAXIMUM 9 ELBOWS IN SUPPLY LINE, MINIMUM 72 INCHES 6 8
OF AGENT LINE FROM TANK TO FIRST NOZZLE.
20" TALL DUCT ENCLOSURE PANELS, 4'-6"
THESE
0.50" QUIK SEAL (LOCKWASHER)
10 11 FRONT, LEFT & RIGHT SIDES
E
- ALL NOZZLE HEIGHT AND PLACEMENT TO BE DETERMINED 30 30 30
VULCAN, CALSTAT
21.5"
BY INSTALLER AND AHJ PER ANSUL GUIDELINES.
28 28 28
(PROVIDED WITH HOOD, GC INSTALLED). GREEN
R
1N
0.50" QUIK SEAL (NUT) EXTENSION RING, TACK WELD
- ALL PIPING TO BE 3/8" SCH 40 BLACK IRON.
REM
TO HOOD OR DUCT TO SECURE
- THIS FIRE SYSTEM COMPLIES WITH U.L. 300 REQUIREMENTS. INSTALLATION.
TOP EDGE OF HOOD.
1'-8"
0.50" QUIK SEAL (WASHER)
3N-S
8'-4"H, DROP CEILING (TYPICAL).
HOOD PROVIDER MUST BE
34
NOTIFIED IF CEILING VARIES.
1A 1.5 GALLON TANK LOCATION OF
LOWER, LEADING EDGE OF HOOD,
1'-2"
2 AUTOMAN RELEASE PULL STATION 70" ABOVE FINISHED FLOOR.
6 ANSULEX LIQUID AGENT (1.5 GAL.) PER LOCAL
8 CARTRIDGE (101-10) CODES.
10 TEST LINK
11 DOUBLE MICROSWITCH HOOD DETAIL 2: 42"L x 3"H, FACTORY ATTACHED
1W NOZZLE ASSEMBLY (419336)
1N NOZZLE ASSEMBLY (419335) MOUNTING CHANNEL FOR CUSTOMER SUPPLIED
PREPARED BY: STRATOVENT
3N NOZZLE ASSEMBLY (419338) WWW.STRTOVENT.COM TRIANGLE, END PANELS (PROVIDED TIMERS. DUAL 115V/1PH OUTLET FACE MOUNTED
28 DETECTOR BRACKET CONTACT: JEFF JOHNSON SPECIFICATIONS: BY STRATOVENT, GC INSTALLED). ABOVE CHANNEL WITH J-BOX ON TOP OF HOOD.
ADDITIONAL QUESTIONS??
30 HIGH TEMP FUSIBLE LINK
FRONT VIEW PH: 251-490-6114, 800-474-0037 * VULCAN CALSTAT, 1E2B9-85, NORMALLY OPEN DRY CONTACT
5'-10"
MGV MECHANICAL GAS VALVE [email protected] CONTACT, STRATOVENT VENTILATION HOODS, * SENSOR FACTORY SET AT 85F
34 REMOTE MANUAL PULL STATION
S SWIVEL ADAPTOR
919-573-4250 - 251-490-6114 * FIELD ADJUSTED W/SET SCREW, CCW INCREASE, CW DECREASE, 90F PER REVOLUTION
* RATED FOR 10 AMPS @ 120 VAC, 5 AMPS @ 240 VAC
CONSULTANT'S
[email protected] * SHIPPED LOOSE BY HOOD VENDOR FOR FIELD INSTALLATION.
100"H X 90"L, BACKSPLASH, COVERING SEAL
HOOD WALL AND 18" BEYOND THE HOOD.
MINIMUM 20 GA. STAINLESS STEEL
PROVIDED BY HOOD VENDOR.
REDDING, CA - RALEIGH, NC
6"
800-474-0037 OR 251-490-6114
FRONT VIEW
R CM
(UL-710 Standard) (NSF/ANSI Standard 2)
UPDATED: 03-14-12 JJ ETL-LISTED FILE #3054804-001 / TESTED TO UL-710
TACO BELL HOOD FIRE SUPPRESSION SYSTEM PLAN 3/8" = 1'-0" 14 HEAT SENSOR ATTACHMENT 10 TACO BELL HOOD DETAIL 3/8"=1'-0" 2
NON-CANOPY HOOD DESIGN BASED ON:
INSTALLATION: DUCT TEMPERATURE SWITCH
LOW-PROFILE HOOD MANUFACTURER: STRATOVENT, SVBD2
ETL LISTED (UL-710): 3054804-001
HOOD DETAIL HOOD #1
MIN. AIRFLOW: 150 CFM/FT
ITEM QTY DESCRIPTION PART NO. FLOW PTS. D
EXHAUST FAN EF 1 MAX. DIST. ABOVE COOK SURFACE: 47"
1A 1.5 GALLON TANK MAX. FRONT COOK SURFACE UNDERHANG: - 3"
1B 3 GALLON TANK MIN. SIDE COOK SURFACE OVERHANG: 0"
40" MIN. (N.T.S.)
D MISC.CHANGES 10.25.13
2 OEM AUTOMAN RELEASE
3 OEM REGULATED RELEASE HOOD DESIGN QUESTIONS?
STRATOVENT KITCHEN VENTILATION
4 OEM REGULATED ACTUATOR
PHONE: 251.490.6114
5 ANSULEX LIQUID AGENT (3 GAL.) [email protected]
ROOF LINE
6 ANSULEX LIQUID AGENT (1.5 GAL.)
OPTION #2: OPTION #1:
7 CARTRIDGE 101-20 THROUGH ROOF OF HOOD DUCT, JUST ABOVE EXHAUST
INTO PLENUM, LEFT OR RIGHT OPENING, (MUST BE REACHABLE DUCT TERMINATION SHALL
8 CARTRIDGE 101-10 OF DUCT OPENING. SEE FROM BELOW OR THROUGH EXPAND TO MINIMUM OF 2"
DETAIL 10/M3.0 CLEAN-OUT DOOR FOR CLEANING).
9 CARTRIDGE 101-30 SEE DETAIL 10/M3.0 LARGER THAN FAN INLET
DIAMETER.
9A CARTRIDGE LT-A-101-30 CONTRACT DATE: XX.XX.XX
9B DOUBLE TANK CARTRIDGE BUILDING TYPE: LIVE MAS MEDIUM54
R CM
10 TEST LINK PLAN VERSION: March 2013
11 DOUBLE MICROSWITCH (UL-710 Standard) SITE NUMBER: XXX-XXX
(NSF/ANSI Standard 2)
12 HOSE ASSEMBLY DROP CEILING (TYPICAL)
NOTE:
FIELD CUT OPENING AND STORE NUMBER: XXXXX
1100 DUCT NOZZLE 430913 SENSOR MUST BE INSTALLED WITH INCLUDED 20"H, 3-SIDED DUCT TRANSITION PER PLANS.
UL-LISTED QUICK SEAL KIT PER FACTORY ENCLOSURE PANELS,
2W DUCT NOZZLE 419337 GUIDELINES (SEE EXPLODED PARTS VIEW). SHIPPED LOOSE BY HOOD
1W NOZZLE ASSEMBLY 419336 SUPPLIER. TACO BELL
16"H, UL-LISTED BAFFLE
1F NOZZLE ASSEMBLY 419333 FILTERS.
1'-2"
123 MAIN STREET
1N NOZZLE ASSEMBLY 419335 3" INTEGRAL REAR STAND-OFF, ANYTOWN, USA 98765
FACTORY INSULATED. HOOD
1/2N NOZZLE ASSEMBLY 419334 ASSEMBLY IS LISTED FOR ZERO
3N NOZZLE ASSEMBLY 419338 CLEARANCE TO COMBUSTIBLE IN
42"L X 3"H X 1.25"W, THE REAR.
245 NOZZLE ASSEMBLY 419340 TIMER
MOUNTING CHANNEL. FACTORY GREASE CUP
230 NOZZLE ASSEMBLY 419339 ATTACHED. DUAL 115V,1PH
2120 NOZZLE ASSEMBLY 419343 POWER OUTLET FLUSH
MOUNTED
5'-10"
290 NOZZLE ASSEMBLY 419342 END PANELS, GC INSTALLED AND
260 NOZZLE ASSEMBLY 419341
SIDE VIEW
ON FACE OF HOOD WITH JBOX
ON
TOP. 3'-0"
PROVIDED BY HOOD VENDOR.
LIVE MAS
MEDIUM54
28 DETECTOR BRACKET
29 LOW TEMP FUSIBLE LINK 20 GA. MIN S/S WALL PANEL
COVERING REAR WALL.
30 HIGH TEMP FUSIBLE LINK
HOOD
MVG MECHANICAL GAS VALVE
EGV ELECTRICAL GAS VALVE
FINISHED FLOOR LINE
REAR WALL.
DRAWINGS
34 REMOTE MANUAL PULL STATION
PLANS AND
S SWIVEL ADAPTOR
ADDITIONAL QUESTIONS?? UPDATED: 03-13-12 JJ
SIDE VIEW SECTIONS
CONTACT, STRATOVENT VENTILATION HOODS,
919-573-4250 - 251-490-6114
M3.0
[email protected]
PLOT DATE:
TACO BELL HOOD FIRE SUPRESSION SCHEDULE N.T.S. 16 HEAT SENSOR LOCATION 12 TACO BELL HOOD SECTION 1/2" = 1'-0" 4
16" KITCHEN HOOD EXHAUST FAN
22.5" SQUARE FLANGE
ON 16" SQUARE DUCT,
LOG TO NG -
RETURN AIR DUCT TOP OF FLANGE TO
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
ROOF-LINE TYP. 24",
REVIEWED AND ADAPTED BY A LICENSED
16" SQUARE DUCT NEMA 3R DISCONNECT FACTORY
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
EXTENDS 2" BELOW WIRED FROM MOTOR TO
O
ROOF-LINE DISCONNECT THROUGH THE
R ELEMENTS
BREATHER TUBE
T'S PRIOR
SENSOR STANDOFF BRACKET
R PSITE-SPECIFIC
NOTE:
LOCATE EXHAUST FANS MIN. 10'-0"
REGIONAL ARCHITECTURAL PARTNER (RAP)
SEAL DUCT PENETRATION AIR TIGHT FROM ANY OUTSIDE AIR INTAKE
6" MIN.
IMAGE
FIRE-PROOF INSULATION
RIO
TO THERMOSTAT
KITCHEN OPERATIONS MUST BE APPROVED
CONSTRUCTION.
12" LIQUID TIGHT FLEXIBLE CONDUIT
L
NSTHE
1" FLANGE DUCT
ITH MEFOR
U
REMOTE HUMIDITY SENSOR TRANSITION VENTED CURB EXTENSION
CONNECTION
MODIFICATIONS THAT CHANGE
JURISDICTIONAL REQUIREMENTS
MIN. 16" GA. WELDED EXHAUST
O
CE WENGINEER
6" MIN. DISTANCE DUCT - EXTEND MIN. OF 18"
I
CEILING
C
TO CHANGE OF ABOVE ROOF DECK PER NFPA
DIRECTION OF DUCT
THITEMPLATE
REMOVABLE RETURN GRILLE ROOF
MUST BEIS
PREFABRICATED GALV. STEEL
CURB WITH INSULATION.
D
ARCHITECT AND/OR
GREASE TRAP
S
D
DOCUMENT
REMOTE HUMIDITY SENSOR 9 OVEN HOOD EXH. DUCT TRANSITION 5 EXHAUST FAN (EF-1) 1
PLA
3/8" = 1'-0" 1 1/2"=1'-0" N.T.S.
DRAWINGS
THESE
R E
REM
ALL-THREADS ROD
FACTORY INSTALLED
TRUSS WEB MEMBER
DISCONNECT & CONDUIT
CHASE, PROVIDE POWER
NUT & WASHER TOP & BOTTOM WASHER & NUT TO DISCONNECT WITHIN
CURB
4"x4" BLOCK @ ROD (4 LOCATIONS) OPPOSED BLADE
DAMPERS
1"
STANDARD CURB CAP,
HOOD MOUNTING FASTEN PER MFR'S
CHANNEL ON HOOD RECOMMENDATIONS
CONSULTANT'S
H2.5 EACH SIDE HOOD METAL EXHAUST DUCT
SEAL
2"x6" TRUSS BTM CORD
1/2" DIA ALL THREAD ROD DRILL
THRU BLOCK C.L.
YMC001
YMC012
D
NOT USED 14 ROD ATTACHMENT 3"=1'-0" 10 BOLT CONNECTION TO HOOD N.T.S. 6 RESTROOM FAN (EF-2) N.T.S. 2
BANDING - 304 SS
3/4"W X .015" THICK MIN.
3" MIN. LONGITUDINAL
OVERLAP AT BLANKET JOINT
3" MIN. PERIMETER OVERLAP
AT BLANKET JOINT
TWO LAYER 1-1/2" THICK 8-PCF FIREMASTER SUPPLY EXHAUST
CONTINUOUSLY WELDED 1-1/2" BLANKET RETURN
HOOD EXHAUST DUCT
10-1/2"
GASKET D MISC.CHANGES 10.25.13
NOTES:
1-1/2"
1. WRAP GREASE DUCT CONTINUOUS AS SHOWN
10-1/2" 21"TYP
FROM CONNECTION AT FAN THROUGH CURB
AND EXTEND 18" MIN. BELOW ROOF DECK.
BANDING REQUIREMENTS: USE 304 STAINLESS STEEL 2. FOR HORIZONTAL RUNS OF EXHAUST DUCTS PROVIDE
BANDS A MAXIMUM 1-1/2" FROM BLANKET EDGE AND TYPICAL TRAPEZE SUPPORT SYSTEM WITH 1/2" HANGER RODS
SPACED A MAXIMUM OF 10-1/2" ON CENTER. TRANSITION TO ROUND SEE PLANS
A MAXIMUM OF 6" FROM INSULATION EDGE. TRAPEZE SUPPORTS
FOR SIZE (WHERE OCCURS)
SHALL BE SPACED A MAXIMUM OF 60" ON CENTER FROM
CENTERLINE OF VERTICAL EXHAUST DUCT. BRANCH DUCT - RECTANGULAR OR
NOTE: ROUND CONTRACT DATE: XX.XX.XX
3. SLOPE HORIZONTAL EXHAUST DUCT RUNS A MINIMUM W
L = 4" MIN. OR 1/4 OF "W"
OF 1/4" PER FOOT (2% SLOPE) TOWARDS EXHAUST HOOD. BUILDING TYPE: LIVE MAS MEDIUM54
4. PROVIDE INSULATED ACCESS DOOR OR PANEL NEAR MID POINT BUTTERFLY DAMPER WITH ARM & PLAN VERSION: March 2013
OF EXHAUST DUCT RUN FOR CLEANING AND INSPECTION OF DUCT. LOCKING QUADRANT (TYPICAL) 1. Hoods shall be constructed of minimum 20 gauge stainless steel with # 3
PROVIDE AN APPROVED SIGN ON ACCESS DOOR OR PANEL WHICH READS SITE NUMBER: XXX-XXX
polish. All unexposed surfaces shall be constructed of minimum
" ACCESS PANEL DO NOT OBSTRUCT" 18 gauge aluminized steel. STORE NUMBER: XXXXX
KITCHEN HOOD EXHAUST DUCT SYSTEM DETAIL N.T.S. 15 2. UL classified aluminum or stainless steel baffle-type filters shall be
easily removed for cleaning. Filter housing shall terminate in a pitched
grease trough that drains into a removable stainless steel TACO BELL
A INSULATED FLEX DUCT - PROVIDE grease cup.
B
SHORT RADIUS RIGID METAL ELBOW 123 MAIN STREET
AIR AIR WHERE 18" R. FLEX ELBOW CANNOT 3. UL listed and NSF approved vapor proof incandescent light fixtures pre-
A B AIR ANYTOWN, USA 98765
FLOW BE MAINTAINED wired to junction box at top of hood in accordance with NEC 70.
FLOW FLOW LOW VELOCITY DUCT
4. Pre-piped fire suppression systems shall be located on the top of the
hood and provided with the hood or by a certified technician. Final
TRANSFORMATION EXPANSION CONTRACTION STRAP HANGER location of all nozzles and fire suppression drops to be locally approved
5. and inspected.
TURNING
VANE NYLON STRAP FASTENER (TYP) Hood(s) shall be fabricated in accordance with NFPA Bulletin #96 and
shall bear the NSF Seal of Approval. Hoods shall be listed under UL 710
TURNING
VANES
1 1/2" DUCT WRAP INSULATION
EXHAUST HOODS FOR COMMERCIAL COOKING EQUIPMENT, Certified
by ETL under FILE# 3054804-001. LIVE MAS
MEDIUM54
THREE
TURNING VANES 2/3D TURNING VANES
NO THROAT RADIUS SHORT RADIUS
R
MECHANICAL
AND HOOD
NOTE:
MAXIMUM ALLOWABLE LENGTH OF FLEX DUCT
D THIS HOOD DESIGN IS BASED UPON
STRATOVENT, MODEL SVND2. MANUFACTURED BY:
DETAILS
D1 RUNOUTS TO SUPPLY DIFFUSERS = 5'-0". FLEX
DUCT IS NOT ALLOWED ON EXPOSED STRATOVENT VENTILATION HOODS
M4.0
D DUCTWORK. RALEIGH, NC 27616
USE ONLY IN AREAS CONTACT: JEFF JOHNSON, 251-490-6114
RETURN AIR BRANCH D FULL RADIUS ELBOW TOP CONNECTION SIDE CONNECTION
SUPPLY OR RETURN WYE
FITTING FULL RADIUS TAKE-OFF WHERE SPACE IS LIMITED
(RECTANGULAR DUCT)
PLOT DATE:
TYPICAL DUCTWORK DETAILS N.T.S. 16 CEILING DIFFUSER CONNECTIONS 3/8" = 1'-0" 8 HOOD NOTES AND SPECS (TYP.) N.T.S. 4
SOIL OR COLD HOT TEMP'D WASTE WATER
1. SOIL AND WASTE PIPE SHALL SLOPE 2% MINIMUM, UNLESS OTHERWISE NOTED OR REQUIRED BY CODE. ITEM FIXTURE VENT DESCRIPTION MANUFACTURER / MODEL NUMBER
WASTE WATER WATER WATER FU FU
LOG TO NG -
2. ALL DRAWN WATER & GAS LINES SHALL BE KEPT TIGHT TO THE UNDERSIDE OF EQUIPMENT & SECURED IN
PROJECTS.
CAST IRON CLEANOUT WITH THREADED ADJUSTABLE HOUSING, ROUND SCORIATED JOSAM / MODEL: 56000
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
EXTERIOR
REVIEWED AND ADAPTED BY A LICENSED
PLACE. -- -- -- -- -- -- -- HEAVY CAST IRON COVER.
ECO 1 CLEANOUT WADE / MODEL: 6000Z
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
SYMBOLS ABBREV. DESCRIPTION
FOR THIS BUILDING TYPE. THESE
3. VERIFY THE LOCATION OF THE SANITARY SEWER ON THE SITE PLAN AND SHALL REVISE THE SEWER SYSTEM AS ZURN / MODEL: Z-1400
O
R ELEMENTS
REQUIRED. Y.B. YARD BOX PVC 12" SQUARE FLOOR SINK, 8" DEEP, WITH ALUMINUM OR PVC DOME STRAINER JOSAM / MODEL: JPFS4-PVC
T'S PRIOR
FS 1 FLOOR SINK 4" 2" -- -- -- 6 -- AND LOOSE SET PVC SLOTTED TOP GRATE.
R.D. ROOF DRAIN ZURN / MODEL: FD-2370-PV4-DS-F
4. PROVIDE TRAP PRIMERS FOR FLOOR DRAINS IN RESTROOMS, WHERE REQUIRED BY CODES. PROVIDE DEEP SEAL
R PSITE-SPECIFIC
TRAPS FOR FLOOR DRAINS WITHOUT TRAP PRIMERS. A.P. ACCESS PANEL
JOSAM / MODEL: 49034AS
REGIONAL ARCHITECTURAL PARTNER (RAP)
CAST IRON 12" SQUARE FLOOR SINK, 8" DEEP, WITH ALUMINUM DOME STRAINER
5. ALL CLEANOUTS SHALL BE INSTALLED WHERE READILY ACCESSIBLE. THE CONTRACTOR SHALL COORDINATE ALL V.T.R. VENT THRU ROOF -- -- -- -- AND NICKEL BRONZE HINGED TOP.
FS 2 FLOOR SINK 4" 2" 6 WADE / MODEL: 9144
IMAGE
CLEANOUT LOCATIONS WITH EQUIPMENT, CABINETS, ETC. AND THE OWNERS REPRESENTATIVE PRIOR TO ANY
V.B.F. VENT BELOW FLOOR
RIO
KITCHEN OPERATIONS MUST BE APPROVED
INSTALLATION. ZURN / MODEL: Z-1900-32
U.T.R. UP THRU ROOF PVC FLOOR DRAIN, 5" DIMA. ZURAM / MODEL: FD-2210
CONSTRUCTION.
L
6. ALL VALVES, TRAP PRIMERS, WATER HAMMER ARRESTORS OR OTHER EQUIPMENT SHOWN IN WALLS OR ABOVE -- -- -- -- IF PVC OR ABS DRAINS ARE USED, SCHEDULE 80 PVC DRAIN PIPE SHALL BE USED
NSTHE
V.C.P. VITRIFIED CLAY PIPE FD 1 FLOOR DRAIN 3" 2" 2 JOSAM / MODEL: 30003-A
ITH MEFOR
U
NON-ACCESSIBLE CEILING SHALL BE INSTALLED BEHIND AN ACCESS PANEL. (3") FOR THE FIRST 10'-0" FROM THE DRAIN.
WADE / MODEL: 1103
C.I. CAST IRON
MODIFICATIONS THAT CHANGE
7. ALL PLUMBING FIXTURE VENTS SHALL TERMINATE A MINIMUM OF 12 INCHES FROM ANY VERTICAL SURFACE AND JOSAM / MODEL: 56000
JURISDICTIONAL REQUIREMENTS
FLOOR CAST IRON CLEANOUT WITH THREADED ADJUSTABLE HOUSING, ROUND SCORIATED
A.C.P. ASBESTOS CEMENT PIPE
O
10 FEET FROM ANY OUTSIDE AIR INTAKE. HEAVY CAST IRON COVER.
CE WENGINEER
FCO 1 CLEANOUT -- -- -- -- -- -- -- WADE / MODEL: 6000Z
I
C
(N) NEW ZURN / MODEL: Z-1400
8. PROVIDE GAS PIPING TO UNITS AND ALL FINAL CONNECTIONS REQUIRED FOR OPERATION.
THITEMPLATE
(E) EXISTING CAST IRON CLEANOUT TEE WITH INLET/OUTLET SPIGOT AND THREADED BRASS JOSAM / MODEL: 58510
9. INSTALL SHUT-OFF VALVES ON ALL HOT & COLD WATER LINES TO FIXTURE OR APPLIANCE. ALL EXPOSED WATER WALL PLUG, WITH STAINLESS STEEL ACCESS COVER.
MUST BEIS
WCO 1 CLEANOUT -- -- -- -- -- -- -- WADE / MODEL: 8560E
AND WASTE LINES TO BE CHROME PLATED. F.D. FLOOR DRAIN
D
ZURN / MODEL: Z-1446-BP
ARCHITECT AND/OR
H.D. HUB DRAIN
S
10. PROVIDE A LEVER HANDLE GAS SHUT-OFF VALVE IN THE BRANCH PIPING OF EACH APPLIANCE OR PIECE OF NON-FREEZE WALL HYDRANT WITH INTEGRAL VACUUM BREAKER, BRONZE CASING JOSAM / MODEL: 71000
EQUIPMENT, FOR EACH APPLIANCE INSTALL QUICK DISCONNECT, FLEXIBLE PIPE WHEN ALLOWED BY CODE AND OFD OVERFLOW DRAIN -- -- -- -- -- AND NICKEL BRONZE BOX.
DOCUMENT
HB 1 HOSE BIBB 3/4" 2.5/1 WADE / MODEL: 8600L
P LA
RESTRAINING DEVICE FURNISHED BY OWNER. PROVIDE PRESSURE REDUCING VALVES AT EACH PIECE OF
EQUIPMENT OR APPLIANCE. IF GAS PRESSURE GREATER THAN 10"/wc IS USED DOWNSTREAM FROM THE GAS F.S. FLOOR SINK ZURN / MODEL: Z-1300
DRAWINGS
METER.
THESE
WATER WHITE VITREOUS CHINA FLOOR MOUNTED FLUSHOMETER TANK (PRESSURE ASSISTED) TYPE,
E
G.L. GAS LINE WC 1 CLOSET 4" 2" 1/2" -- -- 4 2 ELONGATED BOWL, ADA COMPLIANT, 1.1 GPF, WITH OPEN FRONT SEAT LESS COVER, KOHLER "HIGHLINE" / MODEL: K-3519
R
GREEN
11. ALL VALVES, UNIONS, ETC. SHALL BE SAME SIZE AS PIPE UNLESS OTHERWISE INDICATED ON DRAWINGS. OLSENITE #95 OR EQUIVALENT. FLUSHOMETER TANK: SLOAN FLUSHMATE OR EQUAL.
REM
A.F.F. ABOVE FINISHED FLOOR CRANE "ECONMISER" / MODEL: 31888
PROVIDE TANK COVER LOCKS. FLUSH LEVERS SHALL BE RIGHT HAND OR LEFT HAND AS
12. REFER TO KITCHEN EQUIPMENT DRAWINGS FOR PLUMBING ROUGH-IN SCHEDULE & FOR ADDITIONAL WORK TO REQUIRED TO CORRESPOND WITH ACCESS FROM WIDE SIDE OF STALL. VERIFY FLUSH SIDE
BE FURNISHED & INSTALLED BY CONTRACTOR. ALL ROUGH-IN PLUMBING AND FINAL CONNECTIONS TO KITCHEN X-X 0000 PLUMBING EQUIPMENT DESIGNATION
REQUIREMENTS
EQUIPMENT SHALL BE MADE BY THE CONTRACTOR U.O.N. KITCHEN EQUIPMENT NUMBER: REFER TO
XXX WHITE VITREOUS CHINA, WALL HUNG, TOP INLET, ADA COMPLIANT, 1/8 GPF, WITH AM. STD. "WASHBROOK" / 6590.525
KITCHEN EQUIP. DRAWINGS FOR DESCRIPTION. -- -- WALL HANGER.
13. REFER TO MECHANICAL SHEETS FOR HVAC AND HOOD PLUMBING REQUIREMENTS. UR 1 URINAL 2" 1-1/2" 3/4" 5 5 SLOAN WEUS 1000.1301-0.13-ES-S
SS SOIL OR WASTE (SANITARY)/ WASTE STUB GREEN
14. ALL GAS LINES SHALL BE SUPPORTED SEE SPECS. GW SOIL OR WASTE (GREASE WASTE)/WASTE STUB
WHITE VITREOUS CHINA, WALL HUNG, WITH CONCEALED ARMS SUPPORT, 4" CENTERS, A.S. COMRADE/ MODEL: 0124.131
15. ALL FLOOR SINKS AND FLOOR DRAINS IN TRAFFIC AREAS SHALL BE INSTALLED FLUSH TO FLOOR SURFACE. G G GAS / GAS STUB L 1 LAVATORY 1-1/4" 1-1/2" -- -- 1/2" 2 1.5 WITH INTEGRAL BACKSPLASH, ADA ACCESSIBLE. FLAT GRID STRAINER. BRAIDED WATER LINES. CRANE "HARWICH" / MODEL: 1412V
GREEN FAUCET: FURNISHED BY OWNER-INSTALLED BY G.C. ELECTRONIC SENSOR TYPE FAUCET,
CW CW COLD WATER / CW STUB F T&S #B-2460 (N-134), ADA COMPLIANT. SEE 8/P6.0 FOR LAV SUPPORT DETAIL, 0.5 GPM AERATOR --
16. PROVIDE WATER HAMMER ARRESTOR FOR ALL HAND SINKS AND URINAL WATER LINES.
S-1: STAINLESS STEEL HAND SINK, WALL HUNG, INCLUDES A 6" GOOSENECK STAINLESS. --
HW HW HOT WATER / HW STUB
17. PROVIDE AIR GAPS FOR INDIRECT DRAINS AS REQUIRED BY CODE. AIR GAP SHALL BE MINIMUM 2 TIMES THE S 1 HAND SINK GREEN 1-1/2" 1-1/2" -- -- 1/2" 2 1.5 FAUCET W/FOOT VALVE PER DETAIL 7/P6.0. BRAIDED WATER LINES, 0.5 GPM AERATOR --
HOT WATER RETURN
DIAMETER OF THE INDIRECT DRAIN. HWR H.W.R.
-- CONSULTANT'S
V. SANITARY VENT
18. PRIOR TO COMMENCING WORK ON THIS PROJECT, VERIFY DEPTH, SIZE, LOCATION AND CONDITION OF ALL MOP SINK: KOHLER PURIST K-2314 WITH 48" HIGH S.S. SIDE AND BACK-SPLASH. -- SEAL
EXISTING UTILITIES IN FIELD. SHOULD CONDITIONS EXIST OTHER THAN THOSE INDICATED WHICH WOULD CAUSE S 2 MOP SINK 3" 2" 1/2" 1/2" 3 2.25 FURNISHED BY OWNER, INSTALLED BY G.C. --
SD S.D. STORM DRAIN FAUCET: T&S #B-0674-BSTP, WITH VACUUM BREAKER, FURINSHED BY OWNER,
THE DESIGN TO BE ALTERED, CONTRACTOR SHALL NOTIFY OWNER IMMEDIATELY. INSTALLED BY G.C. --
CD C.D. CONDENSATE DRAIN
19. COORDINATE INSTALLATION OF PLUMBING WORK WITH ALL OTHER TRADES SO AS TO AVOID UNNECESSARY 3-COMP. SINK, FAUCET & DRAIN, GEN IV POWER SOAK STANDARD, GEN III IS AN OPTION FOR FRANCHISES --
DELAY OR INTERFERENCES. CONTRACTOR SHALL REVIEW ARCHITECTURAL AND EQUIPMENT SHEETS. FLOOR CLEANOUT OR CLEANOUT TO S 3 SINK INDIRECT -- 1/2" 1/2" -- -/- 3 --
F.C.O.
GRADE
--
20. FURNISH & INSTALL ALL BACKFLOW PROTECTION DEVICES REQUIRED BY AGENCIES HAVING JURISDICTION.
W.C.O. WALL CLEANOUT --
BACKFLOW DEVICES REQUIRING TESTING SHALL BE INSTALLED NO HIGHER THAN 5'-0" A.F.F. SINK, FAUCET AND DRAIN
FW FW FILTERED WATER S 4 PREP SINK INDIRECT -- 1/2" 1/2" -- -- 2 --
21. PROVIDE CONDENSATE DRAIN FROM A/C UNITS TO APPROVED DRAIN, GAS PIPING TO UNITS AND ALL FINAL
TW TW PREMIXED TEMPERATURE WATER --
CONNECTIONS REQUIRED FOR OPERATION.
SEE SITE PLAN FOR EXTERIOR GREASE INTERCEPTOR SIZE AND LOCATION. --
H.B. HOSE BIBB GREASE
22. THE OWNER OR KITCHEN EQUIPMENT SUPPLIER MAY SUBSTITUTE EQUIPMENT OR THE EQUIPMENT MAY VARY GI 1 INTERCEPTOR 6" -- -- -- -- -- -- FINAL SIZE TO BE DETERMINED BY LOCAL BUILDING AUTHORITY --
FROM WHAT IS SHOWN. THEREFORE, VERIFY ALL CRITICAL DIMENSIONS WITH THE OWNER PRIOR TO S.O.V. SHUT-OFF GATE VALVE
--
CONSTRUCTION. FAILURE OF THE CONTRACTOR TO VERIFY THESE DIMENSIONS SHALL PLACE THE RESPONSIBILITY
S.O.C. SHUT-OFF GAS COCK POWERS SERIES LF495
FOR ANY SUBSEQUENT RELOCATION DIRECTLY UPON THE CONTRACTOR. MIXING THERMOSTATIC, 125 P516, 200VF BRONZE BODY, STAINLESS STEEL PISTON LINER,
C.V. CHECK VALVE MV 1 VALVE -- -- 1/2" 1/2" -- -- -- CHECK VALVES SIZE PER PIPE CONNECTIONS. LAWLER SERIES 310
GREEN
23. ALL WATER LINES SHALL BE RUN OVERHEAD U.O.N.
P.T.R.V. PRESS-TEMPERATURE RELIEF VALVE LEONARD SERIES 170
24. ALL WATER LINES SHALL BE FLUSHED PRIOR TO CONNECTING ANY FIXTURES OR EQUIPMENT. GAS FIRED WATER HEATER, 98.5% THERMAL EFF., 120,000 BTUH INPUT, 60 GAL. STORAGE AO SMITH / BTH 120
B.V. BALL VALVE WATER
WH 1 HEATER -- -- 1-1/4" 1-1/4" -- -- -- TANK, 138 GPH @ 100 DEG. RISE REC. RATE, 3" PVC FLUE & AIR INTAKE, ASME RTD TEMP. STATE / SUF 100 120 NE
C.W. COLD WATER BELOW GRADE & PRESS. REL. VALVE, ELECTRONIC IGNITION SYSTEM AND ELETRONIC CONTROLS. F PROTOTYPE UPDATES 12.17.13
25. PROVIDE ESCUTCHEON PLATES AND SILICONE SEALANT AT ALL UTILITY PENETRATIONS INTO WALLS, CEILINGS, Call 800-477-1953 Option #1 for National Account Price & Service
AND FLOORS. DO NOT USE CAULKS OR EXPANDING FOAMS FOR SEALANT.
E.C.O. EXTERIOR CLEAN OUT WATTS SERIES DET
EXPANSION
26. CVPVC SCHEDULE 40 WASTE PIPE CAN BE SUBSTITUTED FOR BLACK IRON WASTE PIPE WHERE ALLOWED BY BFP BACK FLOW PREVENTER ET 1 TANK -- -- 3/4" -- -- -- -- AMTROL SERIES ST
LOCAL MUNICIPALITIES.
FU FIXTURE UNIT WILKINS SERIES WXTP
REDUCED PRESSURE ZONE BACKFLOW PREVENTER, CAST BRONZE CONSTRUCTION WITH WATTS / MODEL: 009M2QTS
BACKFLOW QUARTER TURN FULL-PORT BALL VALVES AND BRONZE STRAINER.
BFP 1 PREVENTOR -- -- VERIFY -- -- -- - WILKINS / MODEL: 975XLS
FEBCO / MODEL: 860
STAINLESS STEEL CASING WITH STAINLESS STEEL BELOW, PRECHARGED WITH NITROGEN. WADE / SHOKSTOP
SHOCK SIZED PER PDI-WH201
SA 1 ARRESTOR -- -- 1/2" -- -- -- -- JOSAM / MODEL: 75000
ZURN / SHOKTROL
GENERAL NOTES E PLUMBING LEGEND C REVERSE OSMOSIS FILTER SYSTEM WADE / SHOKSTOP
REVERSE BY OWNER
RO 1 OSMOSIS INDIRECT -- 1/2" -- -- -- -- JOSAM / MODEL: 75000
SEE TO DETAIL 9/P6.0
DRAIN COLD WATER HOT WATER ZURN / SHOKTROL CONTRACT DATE: XX.XX.XX
1. IF GEN POWER SOAK SINK USED THEN ADD A MIXING VALVE TO SINK ABOVE SUSPENDED CEILING. FIXTURE NO.
BUILDING TYPE: LIVE MAS MEDIUM54
D.F.U. TOTAL
D.F.U.
F.U.
C.W.
TOTAL
C.W.
F.U.
H.W.
TOTAL
H.W.
CAST IRON DEEP SEAL P-TRAP WITH FUNNEL, NO-HUB OUTLET AND BRASS GASKETED JOSAM / MODEL: 88213
HD 1 HUB DRAIN 3" 2" -- -- -- 2 -- CLEANOUT PLUG. WADE / MODEL: 2453EF PLAN VERSION: March 2013
WATER CLOSET 2 4 8 2 4 -- -- ZURN / MODEL: Z-1019
SITE NUMBER: XXX-XXX
URINAL 0 5 -- 5 -- -- -- STORE NUMBER: XXXXX
LAVATORY 2 1 2 1.5 3 1.5 3
TACO BELL
HAND SINK 2 2 4 1.5 3 1.5 3 123 MAIN STREET
ANYTOWN, USA 98765
PREP SINK * 1 -- -- 2 2 2 2
3 - COMPARTMENT SINK * 1 -- -- 3 3 3 3
HOSE BIBB/WATER FILTRATION UNIT 2/1 -- -- 2.5:1/1 3.5 -- --
FLOOR DRAIN 9 2 18 -- -- -- --
HUB DRAIN 1 2 2 -- -- -- --
LIVE MAS
MEDIUM54
FLOOR SINK 5 6 30 -- -- -- --
MOP SINK 1 3 3 2.25 2.25 2.25 2.25 PLUMBING
RETHERMALIZER* 1 - - -- -- 1.0 1.0 SCHEDULES
TOTAL - - 67 -- 20.75 -- 14.25 AND NOTES
PROBABLE DEMANDS/ COLD WATER: 20.75 FU = 20 GPM USE 1-1/2" CW SERVICE
P1.0
AND PIPE SIZING DRAIN: GW 43 DFU USE 4" SANITARY (MIN)
REQUIREMENTS: DRAIN: SAN 24 DFU USE 4" SANITARY (MIN)
HOT WATER: 14 .25 FU =17 GPM USE 1-1/4" HW SERVICE
BASED ON 2009 IPC (COMBINATION DRAIN & VENT). *FIXTURE HAS INDIRECT WASTE TO FLOOR SINK
PLOT DATE:
KEYNOTE F PLUMBING SCHEDULE A
F
ECO 1
WCO 1
ECO 1 2'' S 1
4''VTR
6
FS 2 1
SS
6''
ADT
G
4'' 2" VENT UP IN WALL
2''
DEMARC
13 8 2''
1
D
W
4'' FD 1 FD 1
2 3
FCO
2''
FS 1 RTU-2 ON ROOF 2" VENT RUN
FD 1 UNDERGROUND
2'' 4'' FS 1 S 4
1
6 ECO 1
FD 1 6'' 6'' 6''
8
S 1 (2-WAY) CONSULTANT'S
FCO 1
GW GW GW SEAL
11 4''VTR 6 ECO 1
G 4'' GI 1
5 FD 1 FD 1 (2-WAY)
CD CD 3''
7
SS
RTU-1 ON ROOF FCO 1 L 1 C
4'' FD 1
WCO 1 ECO 1
D
WCO 1 (2-WAY)
WC 1 SS
5
10 4'' 4''
3''
4'' 4''
2-1/2''
FD 1 2-1/2''
FCO 1 6" SAN. FOR CONTINUATION
SS
PROVIDE HUB RAIN HERE SEE CIVIL DRAWINGS
1
WCO 1 S 3 FOR WALK-IN CONDENSATION
1
2'' 2'' LINE IF EVAPORATIVE PAN IS NOT
1
FCO
9 2''
1
4'' USED. THE HUB DRAIN SHALL BE
L
4
WC
FCO 1 HD 1 CONNECTED TO THE SANITARY
FD
WASTE LINE.
FS 1
B G PROTOTYPE UPDATES 1.30.14
S 2
3''
WCO 1
1
12 ECO 1 ECO 1
WH
A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
WASTE & VENT PLAN 1/4"=1'-0" A
TACO BELL
A. NO ROOF PENETRATIONS PERMITTED WITHIN ROOF WATER PLY. REFER TO ROOF PLAN 1 UNDERGROUND SANITARY PIPE SHALL BE NO HUB CAST IRON PIPE FOR THE
10 1" CONDENSATE DRAIN DOWN FROM RTU-1. SEE DETAIL 13 ON DRAWING P6.0.
FOR LOCATIONS. FIRST 10 FEET FROM CONNECTION TO FLOOR SINK FS-2, OUTWARD. 123 MAIN STREET
11 1" CONDENSATE DRAIN DOWN FROM RTU-2. SEE DETAIL 13 ON DRAWING P6.0. ANYTOWN, USA 98765
B. REFER TO RISER DIAGRAM ON SHEET P5.0 FOR ALL WASTE AND VENT SIZES. 2 PROVIDE CONDENSATE LINE AND DRAIN LINE FROM ICE MACHINE TO HD / FS,
3" PVC EXHAUST PROVIDE AIR GAP PER LOCAL CODE. SEE 11/A6.4
DUCT 12 1-1/2" CONDENSATE DRAIN PIPE DOWN TO MOP SINK. PROVIDE AIR GAP AS REQUIRED
C. STORM WATER PIPING IS SIZED FOR A RAINFALL OF 4" PER HOUR. ADJUST ROOF DRAIN
BY CODE. IF REQUIRED RUN CONDENSATE PIPING TO EXTERIOR DRYWELL, RETENTION
(RD-1) SIZE AND STORM PIPE SIZES PER THE LOCAL RAINFALL REQUIREMENTS AND BY 3 PROVIDE WASTE LINES FROM BEVERAGE UNIT TO HD / FS, PROVIDE AIR GAP PER
AREA OR STORM SEWER AS DIRECTED BY THE AUTHORITY HAVING JURISDICTION.
THE AUTHORITY HAVING JURISDICTION. PIPE SHALL DISCHARGE OVER DRIVE-THRU LOCAL CODE. SEE 11/A6.4
MANUFACTURER ROADWAY CURB OR AS DIRECTED BY THE AUTHORITY HAVING JURISDICTION.
RUN DRAIN LINE FROM S/S DRINK MACHINE THRU WALL OP'G. TO OUTFALL AT FS
WATER HEATER 4 PROVIDE 3/4" COPPER CONDENSATE FROM DRAIN PROVIDED BY VENDOR TO 13 BENEATH D/T DRINK MACHINE. SEE DETAIL 11/A6.4
D. INSULATE ALL HORIZONTAL RUNS OF STORM DRAINAGE PIPING ABOVE THE CEILING OR OUTFALL AT MOP SINK (HEAT ROPE IS SUPPLIED WITH FREEZER CONDENSATE).
1/2" VINYL OR PVC CONDENSATE EXPOSED WITH 1" CLOSED CELLULAR INSULATION WITH VAPOR BARRIER JACKET THAT CONCEAL
DRAIN. MUST INCLUDE LOOP AIR
TRAP. 1/4"/ FT MIN. SLOPE
CAN BE PAINTED. CONDENSATE PIPE IN WALL. LIVE MAS
MEDIUM54
E. 4" SECONDARY DRAIN OUTLET SHALL EXTEND 2" BEYOND FINISHED WALL. SEE 5 PVC OR COPPER CONDENSATE DRAIN FROM HVAC UNITS ON ROOF, RUN
WATER HEATER PLATFORM ARCHITECTURAL DRAWING A4.0 FOR INSTALLATION PROCEDURE AND A4.1 FOR EXACT ABOVE CEILING TO FLOOR SINK. PIPING SHALL SLOPE 1/4" PER FOOT AND
LOCATION OF DRAIN OUTLET. SHALL BE INSULATED WITH 1" CLOSED CELLULAR INSULATION. REFER TO RISER
DIAGRAM ON SHEET P5.0 FOR PIPE SIZES.
TOP OF LOOP MUST BE BELOW F. COORDINATE LOCATION OF STORM WATER PIPING ABOVE CEILING WITH ALL TRADES
BOTTOM OF EXHAUST ELBOW. PRIOR TO INSTALLATION. 6 ENTIRE RUN OF DRAIN LINES TO INLET OF EXTERIOR GREASE INTERCEPTOR AND
OUTBOUND FROM INTERCEPTOR TO CONNECTION AT SANITARY MAIN SHALL BE WASTE AND
HUB DRAIN/FLOOR SINK G. SEE ARCHITECTURAL PLANS FOR DOWNSPOUT LOCATIONS SCHEDULE 40 PVC DWV OR AS REQUIRED BY THE AUTHORITY HAVING
NOT TO EXCEED 1" A.F.F.
H. VERIFY WITH THE LOCAL BUILDING AUTHORITY THAT CONDENSATE DRAINAGE CAN BE
JURISDICTION. VENT PLAN
ROUTED TO THE MOP SINK. 7 FLOW CONTROL FITTING WITH VENT.
P2.0
8 4" VENT UP THROUGH ROOF.
9 PIPE 3-COMPARTMENT SINK TO FLOOR SINK WITH AIR GAP PER CODE.
PLOT DATE:
WATER HEATER CONDENSATE DETAIL 1" = 1'-0" E WASTE & VENT PLAN NOTES C KEY NOTES B
F
TW
GAS METER, REGULATOR, VALVES,
BRACKETS, ETC. AS REQUIRED BY
LOCAL GAS CO. SEE CIVIL PLANS
ADT
G FOR CONTINUATION.
1-1/4''
DEMARC
2''
D
2'' 2" GAS RISER
CW
1/2''
RTU-2 ON ROOF
FW
CONSULTANT'S
G
CW
HW HW
CW SEAL
CW
1'' 1'' HW
TW
CW
RTU-1 ON ROOF C
1-1/4''
CW
1-1/2''
HW
G
1-1/4''
1-1/4''
G G
HW
1-1/4''
B
1-1/2''
1 1/2" DOMESTIC WATER SERVICE.
FOR CONTINUATION, SEE CIVIL DRAWINGS.
A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
WATER & GAS PLAN 1/4"=1'-0" A
TACO BELL
A. WATER DISTRIBUTION PIPING IS SHOWN ABOVE FINISH CEILING. UNDER SLAB 1 1-1/4" GAS UP TO RTU-2 WITH DIRT LEG, GAS COCK, UNION. 16 1/2" CW DOWN IN WALL TO EXTERIOR HOSE BIBB.
DISTRIBUTION ALLOWED AT CONTRACTOR OPTION. COORDINATE ALL DETAILS. 123 MAIN STREET
2 1-1/4" GAS DOWN TO WATER HEATER WITH GAS COCK, DIRT LEG AND UNION. 17 BUNDLED SYRUP LINES TO BEVERAGE DISPENSERS S-533 & S-530 AND FILTERED
WATER LINES TO ICE MAKERS S-511 AND FROZEN BEVERAGE DISPENSER S-543. SEE ANYTOWN, USA 98765
B. NO ROOF PENETRATIONS PERMITTED WITHIN THE ROOF "WATER VALLEYS", REFER TO 3 1/2" TEMPERED WATER DOWN IN WALL TO HAND SINK. DRAWINGS A2.0, P5.0, AND 19/A6.4
ROOF PLAN FOR LOCATIONS.
4 1" HOT AND 1-1/4" COLD WATER LINES DOWN TO WATER HEATER. 18 1-1/4" GAS DOWN IN WALL TO TACO BELL COOKING EQUIPMENT. VERTICAL GAS PIPING
C. REFER TO SHT P4.0 FOR ROUGH-IN LOCATIONS. IN WALL SHALL NOT BE RIGIDLY SECURED AND ADEQUATE PIPE PROTECTION SHALL BE
5 1/2" HOT AND COLD WATER LINES DOWN IN WALL TO PREP SINK. PROVIDED.
D. REFER TO SHEET P5.0 FOR WATER AND GAS ISOMETRIC DRAWINGS.
6 1/2" COLD AND HOT WATER LINES DOWN IN WALL TO THREE COMPARTMENT SINK. 19 3/4" GAS DIRT LEG W/ GAS COCK TO COOKING EQUIPMENT. PROVIDE FLEXIBLE GAS
E. FLUSH ALL WATER SUPPLY LINES OF ALL DEBRIS AND IMPURITIES PRIOR TO HOSE KIT FOR CONNECTION TO COOKING EQUIPMENT.
7 1/2" COLD WATER 2'-0" A.F.F. . CONNECT TO WATER FILTER FOR HOT WATER SYSTEM
F.
CONNECTING TO WATER FILTERS.
PROVIDE REDUCED PRESSURE BACKFLOW TO SERVE CARBONATOR, DRAIN RELIEF
P-450. PROVIDE SHUT-OFF VALVE PRIOR TO CONNECTION TO TO WATER FILTER. 20 3" PVC EXHAUST AND INTAKE FLUES FROM WATER HEATER, PIPE THROUGH ROOF AS
RECOMMENDED BY MANUFACTURER TO LOCATIONS SHOWN ON SHEET M2.0. SEE
LIVE MAS
8 1/2" COLD AND HOT WATER DOWN IN THE WALL TO THE MOP SINK. DETAIL 2/P6.0. MEDIUM54
TO FLOOR SINK WITH AIRGAP
9 1/2" CW DOWN IN WALL TO FLUSH TANK WATER CLOSET . 21 1/2" HOT WATER DOWN IN WALL TO TB RETHERMALIZER. PROVIDE SHUT-OFF VALVE
OUTSIDE OF WALL FOR CONNECTION TO RETHERMALIZER.
10 REDUCED PRESSURE BACKFLOW PREVENTER LOCATED PER LOCAL UTILITY REQ'S.
PROVIDE SHUT-OFF VALVES AT BOTH SIDES OF BACKFLOW PREVENTER. PIPE RELIEF 22 RUN GAS PIPE 18" A.F.F. WITH DIRT LEGS FOR GAS HOSE KITS TO COOKING
TO FLOOR SINK. VERIFY LOCATIONS WITH CIVIL DWGS. EQUIPMENT.
11 1" GAS UP TO RTU-1 WITH DIRT LEG, GAS COCK, UNION. 1/4" FILTER WATER PIPE DOWN IN UTILITY CHASE OF DRY PRODUCTION LINE. PROVIDE
WATER AND
23
SHUT-OFF VALVE ON FW PIPING IN CEILING NEAR CHASE.
12 1/2" TEMPERED WATER LINES DOWN IN WALL TO LAVATORY. GAS PLAN
24 1/2" COLD WATER TO REVERSE OSMOSIS FILTER P-305 AND 1/2" FILTER WATER FROM
13 3/4" CW DOWN ALONG WALL TO WATER FILTER S-286. REVERSE OSMOSIS FILTER. PROVIDE SHUT-OFF VALVE ON CW PIPE PRIOR TO
CONNECTION TO FILTER.
P3.0
14 WATER HEATER (WH-1). PIPE CONDENSATE LINE. T&P DISCHARGE AND DRAIN PAN TO
HUB DRAIN. SEE WATER HEATER DETAIL 2/P6.0.
15 EMERGENCY GAS SHUT OFF VALVE LOCATED BELOW CEILING.
PLOT DATE:
NOT USED E NOT USED D WATER & GAS PLAN NOTES C KEY NOTES B
F
1
FCO
L
1
1
1
FD
FD
FD
S
1
1
1
1
1
FCO
WC
HB
FD
FS
FS
E
C-107
2
C-016
FS
G
1
17'-6"
FD
FD
S
G
16'-7" G
13'-321"
G
26'-7-1/2""
G G
15'-921"
8"
HB 1
VTR 29'-0"
FS 1
23'-11-1/2"
5'-6"
5'-6"
ADT
FS 1
23'-1/2"
1'-3"
S-513
DEMARC
10'-0"
D
20'-10"
9'-221"
FD 1 FD 1
10'-0"
12'-7"
G
S 1 S 4 FS 1
7'-021"
P-250
CONSULTANT'S
14'-10" 10'-0" 10'-0" 8'-5" 1021" SEAL
P-452
P-452
FCO 1
FD 1
13'-9-1/2"
FD 1
FCO 1
12'-7-1/2"
G
VTR
C
1'-6"
1'-6"
WC 1
24'-021"
9'-7"
WC 1 9'-1 1/2" 3'-5"
G
FS 2 4'-821" 9"
FD 1
7'-11-1/2"
7'-3" 1'-7" FD 1
FD 1 16'-5"
1'-6"
7'-621"
8'-11"
7'-1121"
S 3
5'-11"
S-286
4'-821"
7'-921"
B
1'-221"
1'-121"
FACE OF WALL G
E PROTOTYPE UPDATES 12.9.13
1'-0"
3'-521"
22'-10"
G PROTOTYPE UPDATES 1.30.14
25'-1"
1
FD
FD
FD
1
1
WC
WC
WH
HD
FD
FS
S
L
B-215
A
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
12 11 10 9 8 7 6 5 4 3 2 1 STORE NUMBER: XXXXX
PLUMBING ROUGH-IN PLAN 1/4"=1'-0" A
TACO BELL
HOT WATER 1. ALL DIMENSIONS TO FLOOR SINKS, FLOOR DRAINS AND HUB DRAINS ARE TO CENTER OF
EQUIP # EQUIPMENT ITEM TYPE ELEVATION REMARKS EQUIP # EQUIPMENT ITEM TYPE ELEVATION REMARKS FIXTURE.
123 MAIN STREET
S 3 3-COMPARTMENT SINK FAUCET CW/HW +38" A.F.F -- COLD WATER ANYTOWN, USA 98765
2. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO COORDINATE THIS DATA ON THE
S 4 PREP SINK W +19" A.F.F -- LOCATION OF ALL PLUMBING ROUGH-INS WITH INFORMATION PROVIDED ON THE
TEMPERED WATER ARCHITECTURAL AND STRUCTURAL DRAWINGS AND THE EQUIPMENT ACTUALLY
FS 1 FLOOR SINK -- S 4 PREP SINK FAUCET CW/HW +38" A.F.F -- SUPPLIED AND TO CONFIRM THE CORRECTNESS OF ANY DIMENSIONS INDICATED
G GAS HEREIN.
FD 1 FLOOR DRAIN --
HD 1 HUB DRAIN -- * CHILLED & FILTERED.
FLOOR DRAIN
WH 1 WATER HEATER CW --
WH 1 WATER HEATER G +15" A.F.F. -- FLOOR SINK LIVE MAS
MEDIUM54
WC 1 WATER CLOSET FLUSH VALVE CW +29" A.F.F BOTH HANDICAP AND REGULAR S-513 ICE MAKER FW - VIA SYRUP BUNDLE
HUB DRAIN
UR 1 URINAL FLUSH VALVE CW +47" A.F.F. WALL MOUNTED C-107 RETHERMALIZER HW +8" A.F.F.
UR 1 URINAL WASTE STUB W +16-1/2" A.F.F. WALL MOUNTED C-107 RETHERMALIZER G +12" A.F.F. WASTE OUTLET
PLUMBING
L 1 LAVATORY TW +20" A.F.F. -- C-016 SINGLE OPEN FRYER G +12" A.F.F.
L 1 LAVATORY WASTE LINE W +16-1/2" A.F.F. --
FLOOR CLEANOUT
ROUGH-IN
S 1 HAND SINK TW +18" A.F.F RIM OF LAV @ +2'-8" A.F.F. WALL CLEANOUT
PLAN
S 2 MOP SINK W -6" A.F.F. RECESSED IN FLOOR S-286 WATER FILTER SYSTEM CW +94" A.F.F. INLET TO & OUTLET FROM FILTER
FILTERED WATER
S 2 MOP SINK FAUCET CW/HW +36" A.F.F -- P-250 UTILITY CHASE FOR M.A.P.S. LINE FW CLG. STUB AT CLG.
S
S
2
3
MOP SINK FAUCET
3-COMPARTMENT SINK
CW/HW +42" A.F.F
W +19" A.F.F
CLOSET MOP SINK ONLY
--
E P-452 FILTER FOR HOT WATER SYSTEM CW +24" A.F.F. VENT UP FROM UNDER SLAB
WATER LINE THRU FLOOR.
P4.0
PLOT DATE:
PLUMBING ROUGH-IN SCHEDULE D SYMBOL LEGEND C PLUMBING ROUGH-IN NOTES B
4" V
4" VTR
1/2" CW
ECO 1
LOG TO NG -
2" V
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
4" V
HB 1
O
SA 1 6" GW
R ELEMENTS
T'S PRIOR
1/2" CW 4" GW
R PSITE-SPECIFIC
FS 1
3/4" CW 1/2" TW 1" CONDENSATE
1" CONDENSATE FROM RTU-1 FROM RTU-2
REGIONAL ARCHITECTURAL PARTNER (RAP)
1/2" HW
4 2" V
IMAGE
3/4" CW 1-1/2"CD
RIO
KITCHEN OPERATIONS MUST BE APPROVED
MV 1 FD 1
4 2" SS
FD 1
3/4" CW
CONSTRUCTION.
MV 1 S 1 2" SS
L
3" GW
NSTHE
1/2" CW 3/4" HW FCO 1
ITH MEFOR
U
2 2" V
SA 1 2" V FD 1
1" CW
1
MODIFICATIONS THAT CHANGE
JURISDICTIONAL REQUIREMENTS
2" V FCO 1 3" GW
O
1" HW
CE WENGINEER I
2" V
C
1/2" HW
SA 1 2" V
THITEMPLATE
4" SS FD 1
1/2" CW 1/2" HW 6" GW
MUST BEIS
1/2" TW 1/2" TW 2" V
3/4" HW WC 1 FCO 1
D
SA 1 1/2" HW G 4" SS 1-1/2" V 3" GW
ARCHITECT AND/OR
SA 1 3" SS 2" V
WC 1 2" SS
S
L 1 1" CW FD 1
4 L 1
2 2" V 4" GW G
DOCUMENT
MV 1
PLA
11 4 FD 1 2" V
4" VTR
DRAWINGS
1/2" CW P-250 MV 1 WCO 1
3" GW
THESE
1/2" TW 1/2" CW 13
E
L 1 2" V
R
1" HW 2" V 4" V
2-1/2" V
2 1 1/4" CW 2" V
REM
RETHERMALIZER 4" SS
C-100 11/4" HW FCO 1 2-1/2" V 2" SS
1/2" TW
WC 1 3/4" HW 3" SS 3" SS FD 1 2" VENT RUN
S 3 S 1 FD 1 FS 1
1-1/4" HW 1-1/2" CW 2" V UNDERGROUND
1
2 3/4" CW 4" V 1
ET WC 1 4" SS
1/2" CW
1/2" CW 2" V 3" GW 1500 GALLON GREASE INT.
1/2" FW 2" V 4" GW
S 4 WCO 1 VERIFY SIZE WITH LOCAL
14 3 BUILDING AUTHORITY
1-1/2" CW 3" SS 3" GW SEE CIVIL PLANS FOR DETAIL
BFP 1 AND LOCATION.
HB 1 9 S-286 HD 1 3" GW
5 1/2" HW 6" GW
WH 1 1/2" CW
ECO 1
3/4"CD
(2-WAY)
CONSULTANT'S
MS 1 ECO 1
S 2
3" GW (2-WAY)
SEAL
1/2" CW ECO 1
3/4"CD GI 1
1 (2-WAY)
RO
1-1/2" CONDENSATE
12
DRAIN DOWN TO MOP 6" SS
SINK
4" SS
1-1/2" DOMESTIC WATER SERVICE. FOR
CONTINUATION, SEE CIVIL DRAWINGS. 6" SANITARY TO SEWER. FOR
CONTINUATION SEE CIVIL DRAWINGS.
WATER ISOMETRIC(SIMILAR) N.T.S. 4 WASTE AND VENT ISOMETRIC(SIMILAR) N.T.S. 1
7
RTU 1
(120 CFH)
G PROTOTYPE UPDATES 1.30.14
10 FILTERED EQUIPMENT AND LINES:
F3 S-286 - WATER FILTER
F3 F2 F1 1
7 F
RTU 2
F2
DIRT LEG (TYPICAL)
FILTERED LINE (COLD WATER)
(250 CFH)
F1
S-513 - ICE MAKER - ABOVE SELF-SERVE BEVERAGE DISPENSER *
S-513 - ICE MAKER - ABOVE DRIVE-THRU BEVERAGE DISPENSER *
S-546
S-285 - DRIVE-THRU BEVERAGE DISPENSER *
1" S-284 *
1 1/4" 6 * S-513 S-285 * S-284 - SELF-SERVE BEVERAGE DISPENSER *
3/4" COLD
* S-513 S-639 * WATER S-546 - ICED TEA BREWER
10
S-639 - FROZEN BEVERAGE DISPENSER *
S-286
1-1/4" CONTRACT DATE: XX.XX.XX
GAS DEMAND SCHEDULE SINGLE FRYER BUILDING TYPE: LIVE MAS MEDIUM54
(110 CFH) C-015
RTU-1 120 CFH
1"
* FILTERED WATER SUPPLIED VIA SYRUP BUNDLE. REFER TO 11/P6.0. SEE
SCOPE OF WORK FOR RESPONSIBILITIES.
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
RTU-2 250 CFH
1"
RETHERMALIZER STORE NUMBER: XXXXX
WH-1 200 CFH
(110 CFH TOTAL) C-100
SINGLE FRYER 110 CFH
FILTERED WATER ISOMETRIC N.T.S. 2
1-1/4"(220) TACO BELL
RETHERMALIZER 110 CFH 1-1/4"(270) 1 ENTIRE RUN OF DRAIN LINES ON INLET TO GREASE TRAP SHALL BE SCHEDULE 40 PVC 10 GAS SHUT-OFF VALVE IN CEILING SPACE BY G.C.
OR NO HUB CAST IRON AS REQUIRED BY CODE. 123 MAIN STREET
RTU-1 (ALT) 180 CFH DIRT LEG (TYPICAL) 1/2" HOT WATER PIPE DOWN IN WALL. PROVIDE SHUT-OFF VALVE OUTSIDE OF WALL
11 ANYTOWN, USA 98765
2 1/2" TEMPERED WATER DOWN IN WALL TO HAND SINK / LAVATORY. FOR CONNECTION TO TB RETHERMALIZER.
RTU-2 (ALT) 240 CFH
3 1/2" HOT AND COLD WATER LINES DOWN IN WALL TO PREP SINK AND 1/2" COLD WATER 12 1/2" COLD WATER CONNECT TO REVERSE OSMOSIS FILTER AND 1/2" FILTERED WATER
TO WATER FILTER FOR HOT WATER SYSTEM P-450. FROM REVERSE OSMOSIS FILTER. PROVIDE SHUT-OFF ON CW PIPE PRIOR TO
CONNECTION TO FILTER.
2"(470) 4 THERMOSTATIC MIXING VALVE.
13 1/2" FILTERED WATER FROM REVERSE OSMOSIS FILTER DOWN IN UTILITY CHASE OF
5 REDUCED PRESSURE BACKFLOW PREVENTER PER LOCAL UTILITY REQ'S. PROVIDE M.A.P.S. LINE. PROVIDE SHUT-OFF VALVE ON FW PIPE IN CEILING NEAR UTILITY CHASE.
2"
SHUT-OFF VALVES AT BOTH SIDES OF BACKFLOW PREVENTER. VERIFY LOCATIONS
WITH CIVIL DWGS. 14 1/2" COLD WATER TO HOT WATER SYSTEM FILTER. LIVE MAS
TOTAL DEMAND MEDIUM54
790 CFH = 790,000 BTUH 6 EMERGENCY GAS SHUT-OFF VALVE (NORMALLY CLOSED) SHALL BE ELECTRIC TEE OFF 3/8" LINE FROM DRIVE THRU BEVERAGE DISPENSER FILTERED WATER SUPPLY.
BASIS OF DESIGN 15
7'' W.C. GAS METER BY LOCAL UTILITY. SOLENOID TYPE WITH SPRING RETURN AND 24 VOLT ACTUATOR, SUITABLE FOR USE SEE DETAIL 16/P6.0.
TOTAL DEMAND ON GAS PIPING SYSTEMS. VALVE SHALL BE ACTIVATED BY ANY OF THE EXHAUST HOOD
840 CFH = 840,000 BTUH
ALTERNATE RTU'S 1 1/4" FIRE SUPPRESSION SYSTEM. PROVIDE RELAYS AS REQUIRED TO ACTIVATE SHUT-OFF
NOTE: VALVE.
WH 1
COORDINATE GAS DEMAND REQUIREMENTS
AND PIPE SIZING WITH SITE-SPECIFIC RTU (200CFH)
7 FACTORY GAS PIPING AT ROOF TOP UNIT FOR THROUGH THE BASE PIPE CONNECTION. RISER
DESIGN. SHUT-OFF VALVE SHALL BE LOCATED OUTSIDE OF THE UNIT.
8 PROVIDE NO HUB CAST IRON PIPE FOR FIRST 10 FEET OF PIPE FROM CONNECTION TO
DIAGRAMS
PIPE SIZE BASED ON 135' OF PIPE AND
7" W.C. FLOOR SINK FS-2
9 PIPE T&P RELIEF VALVE TO OUTSIDE OF BUILDING OR TO HUB DRAIN, RUN FULL SIZE
PIPE FROM VALVE WITH TYPE "K" COPPER TUBING.
P5.0
PLOT DATE:
GAS ISOMETRIC N.T.S. 5 KEYNOTES 3
SUPPLY MAIN FROM METER SURFLO DRINK/ 36" MIN.
LINE AFTER PRESSURE REGULATOR S286
1/2" TEMPERED WATER TO CONNECTION TO DRAIN PAN SHALL BE 3/8" PLASTIC LINE ICE FILTRATION
CONNECTING AT THE TOP OF THE VALVE MANIFOLD SERVICE CLEARANCES
LAVATORIES WATER TO
PRODUCTION LINE UTILITY CHASE. TOP 18"
11
SNOW LVL
CHEESE MELTER
ABV.AVG
AND 12"
12" MIN.
SHUT-OFF VALVE (TYP) FULL SIZE VENT TO ATMOSPHERE PRESSURE SIDES 4"
REGULATOR DRIVE-THRU FRONT 24"
S513
THERMOMETER
RTU EQUIPMENT CURB TEST
ICE MACHINE 1
GATE PORT PRESSURE SELF-SERVE
S513
VALVE GAUGE ICE MACHINE
1-1/2"
WATER FROM
WATER
MV 1 SOFTENER - SHUT-OFF 4
RETURN CONDENSATE DRAIN LINE PRIOR TO VALVE
THROUGH CURB OR THROUGH THE WATER HTR. 13
SINGLE MEMBRANE ROOF W/ MFR.
APPROVED BOOT FLASHING. 5 10
CHECK VALVE (TYP) 1-1/4"
4"
CONNECT TO MAIN ABOVE CEILING 12 T
PREFILTER
G
AND TERMINATE 2" ABOVE RIM OF R.O.
CARTRIDGE
MOP SINK. INSULATE ALL PIPING MEMBRANE STORAGE
FILTER
FILTER
3"
6"
BEYOND THIS PENETRATION DRIVE-THRU DRINK S285
TANK
CD SYSTEM
SELF-SERVE DRINK S284 6
SYSTEM
1/2" LINE REMOVABLE THREADED CAP FOR
CLEAN-OUT & WINTER DRAINING CARBONATOR 1 S570
1-1/4" 8
DOMESTIC CW CARBONATOR 2 S570
SEE WASTE PLAN FOR
YMR008
YMF002
WASTE WATER INDIRECT TO
ICED TEA BREWER S546 9
DOMESTIC HW CONDENSATE LINE BELOW ROOF 14
FLOOR SINK/HUB DRAIN
FROZEN BEVERAGE S639
7
DISPENSER
SEE 11/P6.0 FOR PLUMBING 15
TEMPERING VALVE N.T.S. 17 RTU CONDENSATE N.T.S. 13 REVERSE OSMOSIS SYSTEM N.T.S. 9 CONNECTIONS OF ADDITIONAL 2
EQUIPMENT TO FILTER SYSTEM. 16
REMOTE REMOTE SYRUP LINE "T" SPLICES SHALL BE DONE BELOW THE D/T DRINK
3
ROOFTOP ROOFTOP TABLE. ONCE SYRUP LINES HAVE BEEN SPLICE COMBINE 14 SYRUP
DRY PRODUCTION LINE P311
LINES, 3 WATER LINES AND 1 Co2 LINE AND RUN TRHOUGH IN-WALL GENERAL NOTES:
CONDENSER CONDENSER OPENING TO THE SELF SERVE DRINK STATION AND CONNECT LINES CHEESE MELTER D
AS SHOWN. 1. OVERALL FILTER DIMENSIONS: 1 FLUE THRU ROOF - SEE DETAIL 12/A6.0
R.O. SYSTEM
REFRIGERANT REFRIGERANT 10 21" WIDE x 12" DEEP x 48 1/2" HIGH
LINES LINES ROOF 2 WATER HEATER PLATFORM PROVIDED BY W.H. MANUFACTURER.
2. SEE DETAIL SCOPE OF WORK FOR SCOPE 3 FINISHED FLOOR
DEFINITIONS.
4 THERMAL EXPANSION TANK BY WATTS - SEE PLUMBING SCHEDULE - STRAP AND
3. ROUGH-INS SHALL BE PROVIDED BY THE SUPPORT TO WALL
E
CONTRACTOR. 5 SCHEDULE 40 PVC, MINIMIZE TURNS AND TRANSITIONS.
BUNN HOT WATER P452
IN-LINE POLY GAS COCK VALVE WITH FULL SIZE DIRT LEG
4. INSTALLATION MUST COMPLY WITH ANY 6
FILTER
CEILING STATE OR LOCAL PLUMBING CODES. 7 3/4" DRAIN WITH VALVE & CAP
UTILITY - TOILET ROOMS / GENERAL KITCHEN (COLD)
5. THE FILTER MUST BE PROTECTED AGAINST 8 COMBINATION TEMPERATURE AND PRESSURE RELIEF PER LOCAL CODE
ICE MACHINE 8 8 5 5 N043
6 6 BUNDLES OF 6 WATER LINES
AND 1 Co2 LINE
FREEZING. POWER SOAK @ 3 COMP. SINK
9 RUN T&P DISCHARGE FULL SIZE TO HUB DRAIN CONSULTANT'S
FRUITISTA
MACHINE
DRINK
DISPENSER 2 4 TYPICAL FOR 6 LINES
6. USE ONLY TEFLON (HIGH-LOW WATER PREP LINES P311 10 22" DEEP HEAT TRAP SEAL
ICE MACHINE TEMPERATURE) TAPE TO SEAL THREADED HEATER
PARTS; NO PIPE DOPE. E RETHERMALIZER C107 11 AIR INTAKE W/ INTERNAL INSECT SCREEN PROVIDED BY MFR.
ICE TEA 9 B223
DRINK
BREWER 12 SUPPORT VENT PIPE RUNS EVERY 5'-0" VERTICALLY AND EVERY 3'-0"
DISPENSER 7. DO NOT INSTALL WHERE LINE PRESSURE UTILITY - GENERAL KITCHEN HORIZONTALLY.
3
EXCEEDS 125 PSI OR WHERE (HOT)
TEMPERATURE EXCEEDS 100 F. 13 OUTLET THERMOMETER PROVIDED BY MFR. LOCATE WITHIN 12" OF W.H. OUTLET.
LEGEND
CITY KITCHEN EQUIPMENT # FLOW ARROW 14 SEE DETAIL 7/P6.0 FOR SCHEDULE OF ITEMS PROVIDED BY W.H. MFR.
8. SEE THE EQUIPMENT PLAN FOR LOCATION. Nxxx
1
YMF023
WATER SEE DETAIL 12 THIS SHEET FOR BUNDLE (SHEET A2.0) DRAIN PAN TO HUB DRAIN.
TPS032
15
I
SUPPLY 9. POINT OF CONNECTION (PEPSI)
C
E DETAILS
SYSTEM 16 P-TRAP AND LINE TO DRAIN PROVIDED BY MANUFACTURER. LEAVE AIR GAP
9 POINT OF CONNECTION (GC) BETWEEN BOTTOM OF TRAP AND DRAIN.
10. "Y" FOR ICE MACHINES SUPPLY LINES
SHALL BE INSTALLED @ FILTER OUTLET.
DRINK DRINK
1/2 I.D. LINE 3/8"
SHUT-OFF WATER FILTRATION SCHEMATIC N.T.S. 6 WATER HEATER N.T.S. 2
VALVE
COUNTER COUNTER WATER 11. BACKFLOW PREVENTERS FOR FILTER
REGULATOR -
3 ASSEMBLY ARE PROVIDED.
13 13 60PSI
2 2 ALL WORK THIS DETAIL PER DETAILS 6, 11 & 12/P6.0
11
4A 4A FACE OF SINK
1 FILTER LINE F1 SUPPLIES FILTER LINE F2 SUPPLIES
4B 4B SYRUP SYRUP SYRUP NOTE: BUNDLED TUBE BY PEPSI BUNDLED TUBE BY PEPSI
1 12 12 BULK CO2 TANK
4C 4C THERE ARE TWO SELF-SERVE DRINK/ICE 1/2" PIPING SHALL BE HARD COPPER
SYSTEMS WHICH SHARE A COMMON FLOOR LINE, OR BRAIDED STAINLESS HOSE. 1. DRIVE THRU DRINK STATION 1. ICE MACHINES
1 1
WATER FILTER SINK WITH THE D/T DRINK/ICE SYSTEM. SOFT COPPER IS NOT ACCEPTABLE. 2. SELF SERVE DRINK STATION
3 7 SYRUP SYRUP SYRUP
7 WALL
9 CO2
CARBONATOR CARBONATOR 9 3 SECONDARY
MOTOR MOTOR NOTE INSTALL ELECTRICAL, WATER, AND DRAIN IN 1/2" SWEAT/ 3/8" COMPRESSION
WB2-M3-22-003 D MISC.CHANGES 10.25.13
REGULATOR
SYRUP SYRUP SYRUP 90-100 PSI ACCORDANCE WITH ALL LOCAL, STATE & FEDERAL 3" WATER BOOST MODULAR FILTRATION (WBMF) SYSTEM
E PROTOTYPE UPDATES 12.9.13
OPENING IN WALL FOR CODES.
1/2" COPPER LINE FROM 2
DINING ROOM DRINK
EQUIPMENT RATING: MIXING VALVE ABOVE F2 F1
DRAIN LINE. SEE ICEMAKER SYRUP SYRUP SYRUP
11/A6.4 D ED250 DISPENSER - 115V, 3.5 AMPS 1/2" SWEAT W/ 1/2" MALE ADAPTER
DISPENSER DRAIN DRAIN
ED300 DISPENSER - 115V, 4.0 AMPS 1/2" ANGLE STOP VALVE
CARBONATOR - 115V, 60 Hz, 7.0 AMPS
FLOOR SINK BAG N BOX RACK BOOSTER ASSEMBLY - 115V. 60 Hz, 6.5 AMPS 1/2" HARD COPPER LINE TO SINK
DINING ROOM DRIVE THRU BACK ROOM 1/2" WALL STRAP
KEY NOTES: 1/2" SWEAT ELBOW
1 3/8" Co2 LINE 4 3/8" FILTERED WATER LINE TO DINING & DRIVE THRU 5 BUNDLED TUBING CEILING 7 PRE-SET Co2 REGULATOR 9 3/8" SHUT OFF VALVES 11 3/8" FILTERED 12 3/8" LINE FOR CONTRACT DATE: XX.XX.XX
A. WATER LINE TO ICE MACHINE PENETRATION. SEE DETAIL 18/A6.4 BARB FITTINGS. TYP @ WATERLINE - ICE TEA, PRESSURIZE FILTERED SINGLE FOOT PEDAL BUILDING TYPE: LIVE MAS MEDIUM54
2 14 - 3/8" SYRUP B. WATERLINE TO WATER DISPENSER VALVE ALL"Y"s FRUITISTA, DRINK WATER 1
6 STAINLESS CHASE 8 SURFACE MOUNTED S.S.
C. WATERLINE TO CARBONATOR MACHINES & ICE 1/4" X 3" TAPCON HEX HEAD SCREW
YMF001
LINE BUNDLE PLAN VERSION: March 2013
TPS030
SURFACE MOUNTED FROM CHASE; ONE FOR EACH 10 DRINK SYSTEM BUNDLED ELECTRICAL FOR DRINK
MACHINES 13
3 1/2 X 3/8 X 3/8 "Y" CEILING TO TOP OF ICE BUNDLE. SEE DTL. 15/A6.4 TUBING. SEE DETAIL SYSTEM. SEE SHEET E3.0 1/2" SWEAT W/ 1/2" MALE ADAPTER SITE NUMBER: XXX-XXX
MACHINE 12/P6.0
STORE NUMBER: XXXXX
DRINK SYSTEM SCHEMATIC N.T.S. 11 FOOT PEDAL N.T.S. 7
TACO BELL
CO2 LINE TO D/T DRINK
DISPENSER ICE MAKER 9 FLAVORS & 4 123 MAIN STREET
LINES FOR ANYTOWN, USA 98765
FILTERED WATER LINE CARB PUMP FUTURE
TO D/T DRINK FROZEN
DISPENSER BEVERAGE
DISPENSER DRINKING WALL
KEY NOTES:
Co2 LAVATORY 1 3/4" COLD WATER INLET TO 1/2" COPPER LINE AND FITTINGS AT FILTER.
3/8" x 1/4" SHUT 2 3/4" OUTLET W/ INTEGRAL BACKFLOW PREVENTER, EQUAL TO WATTS
OFF VALVE REGULATOR CO. SERIES 007 AND SERVICE BALL VALVE. LIVE MAS
3/8" FILTERED MEDIUM54
TEE OFF FROM D/T
DRINK DISPENSER WATER LINE GENERAL NOTES:
FILTERED WATER LINE
AND RUN TO FBD 1. OVERALL DIMENSIONS 21" WIDE x 12" DEEP x 48 1/2" HIGH
2. SEE SCOPE OF WORK FOR ADDITIONAL INFORMATION.
FLOOR MOUNT UPRIGHT SUPPORT 3. INSTALLATION MUST COMPLY WITH STATE OR LOCAL PLUMBING
TEE OFF FROM D/T
IF TUBES ARE EXPOSED, PROVIDE
FILTERED WATER
SEE 11/P6.0 FOR PLUMBING
CONNECTIONS OF ADDITIONAL
CODES. PLUMBING
STAINLESS STEEL WALL COVER 4x4 WELDED BASE PLATE W/ (4) 1/2" 4. THE UNIT MUST BE PROTECTED AGAINST FREEZING.
AND CO2 LINES VIA
DRINK DISPENSER CO2
LINE AND RUN TO FBD 3/8" CO2 LINE SYRUP BUNDLE
EQUIPMENT TO FILTER SYSTEM.
APPROX. APPROX. HILTI KWIK BOLT II OR EQUAL 5. USE ONLY TEFLON (HIGH-LOW TEMPERATURE) TAPE TO SEAL
THREADED PARTS; NO PIPE DOPE.
DETAILS
421" DIA. 721" DIA 6. DO NOT INSTALL WHERE LINE PRESSURE EXCEEDS 125 PSI OR
FINISH FLOOR WHERE TEMPERATURE EXCEEDS 100 F.
P6.0
7. SEE SHT. A2.0 FOR LOCATION.
YMF003
TPS024
TPW001
WATER & Co2 BUNDLE SYRUP BUNDLE
DRINK SYSTEM SCHEMATIC DETAIL N.T.S. 16 DRINK MACH. BUNDLE CONFIG. NTS 12 LAVATORY SUPPORT N.T.S. 8 WATER FILTER SYSTEM N.T.S. 4 PLOT DATE:
A A
7
8
6 G A
E
TB 3
5 1 1
A B
PL
1
9 CONSULTANT'S
2 SEAL
A
1
M
1
A
A
4
SA
E
V-323 - DIRECTIONAL SIGN
V-303 - PYLON SIGN E PROTOTYPE UPDATES 12.9.13
V-332 - DT CANOPY
G PROTOTYPE UPDATES 1.30.14
V-331 - DT CLEARANCE BAR
V-302 - MENU @ DT
NORTH CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
SITE ELECTRICAL PLAN 1"=20'-0" A
TACO BELL
1 3/4" C. - 2 #10, #10 GRD. (TYP. FOR ENTIRE CIRCUIT.)
123 MAIN STREET
2 DIRECTIONAL SIGN. (OPTIONAL)
ANYTOWN, USA 98765
3 MENU BOARD. REFER TO DETAILS 2&16/C1.0 AND 16/E6.0
4 PYLON SIGN.
5 UNDERGROUND ELECTRIC SERVICE TO UTILITY CO. TRANSFORMER. REFER
TO CIVIL SHEETS FOR LOCATION AND ROUTING. VERIFY AND COORDINATE
ALL REQUIREMENTS WITH UTILITY CO.
6 UNDERGROUND TELEPHONE SERVICE. REFER TO CIVIL SHEETS FOR
LOCATION AND ROUTING. VERIFY AND COORDINATE ALL REQUIREMENTS
WITH UTILITY CO.
LIVE MAS
MEDIUM54
7 ORDER CONFIRMATION BOARD/ SPEAKER POST.
8 FUTURE PREVIEW BOARD. (OPTIONAL)
9 ILLUMINATED CLEARANCE BAR. REFER TO DETAILS 2 & 3/C1.1.
SITE
ELECTRICAL
PLAN
E1.0
PLOT DATE:
NOT USED F NOT USED E NOT USED D NOT USED C KEY NOTES B
NATIONAL ACCOUNTS: SWITCHGEAR
SUPPLY and INSTALL STANDARD PACKAGE
LOG TO NG -
PROJECTS.
CORPORATE AND FRANCHISE DEVELOPMENT
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
D
O
R ELEMENTS
YUM NATIONAL ACCOUNT AGREEMENT IS WITH SQUARE-D FOR ELECTRICAL
T'S PRIOR
SWITCHGEAR EQUIPMENT FOR COMPANY AND FRANCHISE DEVELOPMENT.
CUTLER-HAMMER ELECTRICAL SWITCHGEAR EQUIPMENT IS AN APPROVED
R PSITE-SPECIFIC
ALTERNATE MANUFACTURER FOR FRANCHISE DEVELOPMENT ONLY.
REGIONAL ARCHITECTURAL PARTNER (RAP)
UNDER THIS AGREEMENT, THE CONTRACTOR IS RESPONSIBLE FOR
IMAGE
PURCHASE AND INSTALLATION OF THE SYSTEMS DESCRIBED IN THE PLANS.
RIO
KITCHEN OPERATIONS MUST BE APPROVED
ALL COMPANY AND FRANCHISE PROJECTS SHALL CONTACT ACCUSERVE FOR 3/4"C-1 #2/0 CU BOND TO
A PRICE QUOTE AND A BILL OF MATERIAL CONFIRMATION FOR THEIR CONCRETE ENCASED CURRENT TRANSFORMER (CT) CAN
CONSTRUCTION.
SPECIFIC PROJECT. SEE THE SWITCHGEAR SECTION IN THE SCOPE OF REBAR PER N.E.C. ARTICLE
L
5 AND METER SOCKET PER SERVING
NSTHE
1 #2/0 CU EQUIP. BOND
ITH MEFOR
WORK FOR ADDITIONAL INFORMATION. 250.52 (A) (3)
U
SINGLE POINT PER N.E.C. ARTICLE UTILITY COMPANY SPECIFICATIONS.
GROUND
E 250.92 ENGINEER TO CONFIRM WITH LOCAL UTILITY IF
MODIFICATIONS THAT CHANGE
PRIMARY CONTACT: BUDDY BOCKWEG CURRENT TRANSFORMERS CAN BE MOUNTED IN
JURISDICTIONAL REQUIREMENTS
R T
PHONE: (877) 707-7378
O
UTILITY TRANSFORMER CABINET AND IF THE METER
CE WENGINEER
CONCRETE
S
"MSB"
I
FAX: (502) 961-0357
I
CAN BE MOUNTED TO THE UTILITY TRANSFORMER
C
ENCASED REBAR
EMAIL: [email protected] CABINET. IF OK WITH THE UTILITY, MOUNT CURRENT
(MIN. 20'-0")
A U E
THITEMPLATE
TRANSFORMER AND METERS THERE IN LIEU OF
THE SWITCHGEAR PACKAGE CONSISTS OF SERVICE ENTRANCE,
MUST BEIS
PROVIDING SEPERATE CT CABINET.
SWITCHGEAR, MAIN PANELS, SUB PANELS, LIGHTING CADWELD EXOTHERMIC
D
CONNECTION
R Q
CONTACTORS AND ALL ASSOCIATED PRODUCTS TO
ARCHITECT AND/OR
150AT 200AT 200AT 400AT
COMPLIMENT THE SWITCHGEAR PACKAGE. 2 2 2 2
S
3P 3P 3P 3P
A E E D
#1 #2 #3 #4 #5 #6
DOCUMENT
3/4"C-1 #2/0 CU BOND TO
PLA
BE PREPARED AT TIME OF ORDER OR QUOTE REQUEST TO PROVIDE ALL COLD WATER PIPE PER ELECTRICAL SERVICE SHALL BE 600 AMP, 120/208V,
E R H N
DRAWINGS
N.E.C. ARTICLE 250.52 (A) (1) 8 8
PROJECT DETAILS REGARDING SPECIFICATIONS AND QUANTITIES AS SITE
THESE
1 #3 CU BOND IN EACH
AND 250.53 (D)
E
SPECIFIC DESIGN MAY NOT MATCH PROTOTYPICAL DESIGN.
G T T A
R
REM
NOTE: THE SITE-ADAPT CONSULTANT IS RESPONSIBLE FOR DETERMINING IF
1 #6 CU BOND &
1 #6 CU BOND &
1 #6 ISOL. GND
1 #6 ISOL. GND
(2) 2"C-4 #3/0 &
H O M S.
1 #6 CU BOND
THE SITE-SPECIFIC SWITCHGEAR PACKAGE FALLS WITHIN A JURISDICTION
3/4"C-1 #2/0 CU GND PER 7
2"C-4 #1/0 &
2"C-4 #3/0 &
2"C-4 #3/0 &
THAT REQUIRES EUSERC-COMPLIANT METERING EQUIPMENT.
OFFICE N.E.C. ARTICLE 250.66
T.T.B.
T C N O .
I O R .P
SPACE
SPACE
PNL. PNL.
F .G
6 PNL.
W
S T D
"A" "B" "D"
T
OUTDOOR #6 CU TO 1 EVO
U
ENCLOSURE "MSB" GND BUS EQUIPMENT
SEE KEYNOTE 6/E2.1 FOR VARIATIONS.
E
NEMA 3R CABINET CONSULTANT'S
M
THE SITE ADAPT CONSULTANT IS RESPONSIBLE FOR
DETERMINING IF THE SITE SPECIFIC SWITCHGEAR
PACKAGE FALLS WITHIN A JURISDICTION THAT REQUIRES
L A
A H HE ED 4 TO LOCAL PHONE SERVICE
(FURNISHED
BY OTHERS)
1
3
SEAL
IC T S T
EUSERC-COMPLIANT METERING EQUIPMENT.
MAIN MAIN
MAIN
MAIN
MAIN
MAIN
CURRENT TRANSFORMER (CT)
CAN AND METER SOCKET PER
SERVING UTILITY CO. SPEC. R N
T IO IS R A
E C T H G
INCOMING SERVICE LATERAL
L C T TE
I
TO UTILITY TRANSFORMER
E D T IN E
TO PANELS "A", "B", "D", "H" & DUAL-LINE EQUIPMENT CABINET
E IS E A 03-08-2013
H
T UR E A L N B 05-31-2013
C MISC. CHANGES 9.06.13
D S
D MISC.CHANGES 10.25.13
UNDERGROUND FEEDERS
S J
W N E. RE
O I C
NOTE: CONFIRM DIMENSIONS WITH SUPPLIER
SERVICE ENTRANCE EQUIPMENT ELEVATION - NON-EUSERC PACKAGE
H E I SINGLE LINE DIAGRAM B
D
S E A Q N U 1. THERE SHALL BE U.L. LISTED SERIES RATING BETWEEN CKT. BREAKERS LOCATED AT THE DISTRIBUTION
PANEL AND THE DOWNSTREAM 10k A.I.C. RATED CIRCUIT BREAKERS AT PANELS "A", "B" DUAL-LINE
1 WIRE ISOLATED GROUND TO ISOLATION GROUND BUS IN PANEL AND LAND ISOLATED GROUND TO SINGLE
POINT GROUND. "DO NOT COMBINE COMMON GND TO ISOLATED GROUND". CONTRACT DATE: XX.XX.XX
I
FUSIBLE DISCONNECT SWITCH EQUIPMENT CABINET BASED ON THE MAXIMUM FAULT CURRENT AS DETERMINED AT THE SERVICE
E
2X4 FLUORESCENT FIXTURE NIGHT LIGHT
T S WITH STARTER BUILDING TYPE: LIVE MAS MEDIUM54
ENTRANCE. AND DOWNSTREAM 22K A.I.C. RATED CIRCUIT BREAKERS AT PANEL "D." 2 6 BUILDING MAIN DISCONNECT FOR THIS SERVICE:
L
S CEILING MOUNTED SPEAKER (MAXIMUM 6 MAINS PER N.E.C) PLAN VERSION: March 2013
E R
FUSED DISCONNECT SWITCH
U
2X4 FLUORESCENT FIXTURE 2. THE NFPA-70 'SIX SWITCH' MAXIMUM RULE SHALL APPLY AT THE POINT AT WHICH THE SERVICE ENTERS LABEL EACH MAIN BREAKER AS INDICATED: "MAIN 1 OF 6" (ENGRAVED LETTERS x 3/4" HIGH)
S SITE NUMBER: XXX-XXX
P T
WITH BATTERY PACK WALL MOUNTED SPEAKER THE BUILDING AS DEFINED BY NFPA-70 (CURRENT EDITION IN FORCE AT THIS SITE). NOTIFY ENGINEER "MAIN 2 OF 6"
J JUNCTION BOX
E Y NON-FUSED DISCONNECT SWITCH WHERE LOCAL CONDITIONS REQUIRE ALTERNATE LOCATIONS OR SINGLE POINT DISCONNECT. "MAIN 3 OF 6"
"MAIN 4 OF 6"
STORE NUMBER: XXXXX
H M PHOTOCELL 3. SEE SCOPE OF WORK FOR DETAILS REGARDING OWNER SUPPLIED AND/OR INSTALLED PRODUCTS. "MAIN 5 OF 6"
L C
1X4 FLUORESCENT FIXTURE J WALL MOUNTED JUNCTION BOX GENERAL CONTRACTOR IS RESPONSIBLE FOR ALL OTHER ASPECTS OF THE PROJECT "MAIN 6 OF 6" TACO BELL
1X4 FLUORESCENT FIXTURE
TELEPHONE OUTLET
DEDICATED GROUNDED OUTLET S L O E RAIN SENSOR 4. IF UTILITY COMPANY PROPOSES A SERVICE DIFFERENT FROM THAT ILLUSTRATED, CONTACT THE
CONSTRUCTION ENGINEER FOR A DECISION BEFORE PROCEEDING. COORDINATE AVAILABLE SHORT
3 EQUIPMENT CABINET IS FURNISHED WITH EVO LINE.
123 MAIN STREET
C J
WITH BATTERY PACK
A
CIRCUIT CURRENT W/ LOCAL UTILITY AND PROVIDE CIRCUIT BREAKERS W/ SUFFICIENT INTERRUPTING ANYTOWN, USA 98765
S
FLUORESCENT WALL MOUNT FIXTURE 4 PROVIDE 2" CONDUIT STUBBED INTO BUILDING FROM LATERAL POLE FOR TELEPHONE.
DUPLEX GROUNDED OUTLET CAPACITY.
DOWNLIGHT FIXTURE DOUBLE DUPLEX GROUNDED OUTLET
I IC C O EMERGENCY LIGHT
5. COORDINATE CT METERING COMPARTMENT SIZE WITH LOCAL UTILITY COMPANY, THE LOCAL ELECTRICAL
5 VERIFY AVAILABLE FAULT CURRENT AT SERVICE ENTRANCE WITH THE UTILITY CO. AND CONFIRM 65 KAIC
RATED EQUIPMENT IS SUFFICIENT.
H
SUSPENDED DOWNLIGHT FIXTURE INSPECTOR AND THE NATIONAL ELECTRICAL CODE TO MEET ALL REQUIREMENTS BEFORE PURCHASE
T YP ER PR
GROUND FAULT DUPLEX OUTLET
SINGLE POLE, SINGLE THROW AND INSTALLATION. NEW METER BY LOCAL UTILITY COMPANY. 6 (3) 5/8" DIA. x 10'-0" COPPER CLAD GROUND RODS. INSTALL 10'-0" APART AND CONNECT GROUND SYSTEM
GROUND FAULT DUPLEX W/ BOTT. HALF SWITCHED TOGGLE SWITCH
PENDANT MOUNTED LIGHT FIXTURE PER N.E.C ARTICLE 250.
GROUND FAULT DEDICATED OUTLET 6. ALL WIRING SHOWN SHALL BE COPPER TYPE "THHN/THWN" EXCEPT FEEDERS FROM UTILITY
SINGLE POLE, SINGLE THROW TOGGLE TRANSFORMER TO SWITCH BOARD MAY BE ALUMINUM. 7 INSTALL UNDERGROUND SERVICE LATERAL TO UTILITY TRANSFORMER PER SERVING UTILITY COMPANY
TRACK MOUNTED CEILING DUPLEX OUTLET SWITCH W/ PILOT LIGHT SPECIFICATIONS. 4#350kcmil IN EACH OF (2) 3"C. TO PAD MOUNT TRANSFORMER. GC / ELECT. LIVE MAS
T US E .
PENDANT LIGHT FIXTURE 7. ARMOR CABLE ACCEPTABLE FOR ALL APPLICATIONS WHERE ALLOWED BY LOCAL CODES. ALL CONDUIT
DUPLEX ISOLATED GROUND OUTLET CONTRACTOR SHALL COORDINATE SERVICE POLES PER LOCAL UTILITY CODE. IF ALUMINUM MEDIUM54
R RELAY MUST BE CONCEALED U.N.O..
DIRECTIONAL FIXTURE CONDUCTORS ARE USED PROVIDE 4#500kcmil IN EACH (2) 3-1/2"C.
H
FIXTURE, TRACK MOUNTED DOUBLE DUPLEX ISOLATED GROUND OUTLET
E T ER
CONDUIT RUN, UNDERGROUND
DIRECTIONAL FIXTURE, DEDICATED ISOLATED GROUND
TRACK MOUNTED TO
UNDERSIDE OF INTERIOR CANOPY SPECIAL PURPOSE OUTLET SMOKE DETECTOR RISER
DIAGRAM
IF ET
CEILING SPECIAL PURPOSE OUTLET
COOLER FIXTURE EXTERIOR WALL FIXTURE
ELECTRICAL PANEL. SEE
EXIT SIGN (WALL MOUNTED)
SHEET E2.1 FOR PANEL SCHED.
EXTERIOR DECORATIVE WALL FIXTURE
AND LEGEND
HOLD UP EMERGENCY BUTTON
NON-EUSERC
EXIT SIGN (CEILING MOUNTED)
SECURITY STROBE
c
ELECTRICAL MOTOR
DUCT MOUNTED SMOKE DETECTOR
CONNECTION TO EQUIPMENT
M WPG
EXTERIOR DECORATIVE WALL FIXTURE
WEATHERPROOF GROUND FAULT E2.0
PLOT DATE:
ELECTRICAL LEGEND F GENERAL NOTES D KEY NOTES C
NATIONAL ACCOUNTS: SWITCHGEAR
SUPPLY and INSTALL STANDARD PACKAGE
LOG TO NG -
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
CORPORATE AND FRANCHISE DEVELOPMENT
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
O
R ELEMENTS
YUM NATIONAL ACCOUNT AGREEMENT IS WITH SQUARE-D FOR ELECTRICAL
T'S PRIOR
SWITCHGEAR EQUIPMENT FOR COMPANY AND FRANCHISE DEVELOPMENT.
CUTLER-HAMMER ELECTRICAL SWITCHGEAR EQUIPMENT IS AN APPROVED
R PSITE-SPECIFIC
.
ALTERNATE MANUFACTURER FOR FRANCHISE DEVELOPMENT ONLY.
ES C
REGIONAL ARCHITECTURAL PARTNER (RAP)
UNDER THIS AGREEMENT, THE CONTRACTOR IS RESPONSIBLE FOR
IMAGE
PURCHASE AND INSTALLATION OF THE SYSTEMS DESCRIBED IN THE PLANS.
O ER
RIO
KITCHEN OPERATIONS MUST BE APPROVED
ALL COMPANY AND FRANCHISE PROJECTS SHALL CONTACT ACCUSERVE FOR 3/4"C-1 #2/0 CU BOND TO
A PRICE QUOTE AND A BILL OF MATERIAL CONFIRMATION FOR THEIR CONCRETE ENCASED
CONSTRUCTION.
SPECIFIC PROJECT. SEE THE SWITCHGEAR SECTION IN THE SCOPE OF REBAR PER N.E.C. ARTICLE
L
NSTHE
(1) #2/0 CU EQUIP. BOND
ITH MEFOR
250.52 (A) (3)
U
WORK FOR ADDITIONAL INFORMATION.
SINGLE POINT PER N.E.C. ARTICLE 5
ET C E S
S
GROUND 250.92 600A., UNDERGROUND
MODIFICATIONS THAT CHANGE
PRIMARY CONTACT: BUDDY BOCKWEG
JURISDICTIONAL REQUIREMENTS
PULL SECTION PER
PHONE: (877) 707-7378
M JE RE A
O
CE WENGINEER
CONCRETE SERVING UTILITY COMPANY
ER T U
I
FAX: (502) 961-0357
C
ENCASED REBAR SPECIFICATIONS.
EMAIL: [email protected] (MIN. 20'-0")
THITEMPLATE
D O I R
THE SWITCHGEAR PACKAGE CONSISTS OF SERVICE ENTRANCE,
MUST BEIS
SWITCHGEAR, MAIN PANELS, SUB PANELS, LIGHTING CADWELD EXOTHERMIC
D
CONNECTION
ARCHITECT AND/OR
CONTACTORS AND ALL ASSOCIATED PRODUCTS TO
N R U A
150AT 200AT 200AT 400AT
COMPLIMENT THE SWITCHGEAR PACKAGE. 2 2 2 2
S
3P 3P 3P 3P
#1 #2 #3 #4 #5 #6
DOCUMENT
E
3/4"C-1 #2/0 CU BOND TO
PLA
COLD WATER PIPE PER ELECTRICAL SERVICE SHALL BE 600 AMP, 120/208V,
BE PREPARED AT TIME OF ORDER OR QUOTE REQUEST TO PROVIDE ALL 9 9
DRAWINGS
N.E.C. ARTICLE 250.52 (A) (1)
G
PROJECT DETAILS REGARDING SPECIFICATIONS AND QUANTITIES AS SITE
THESE
1 #3 CU BOND IN EACH
AND 250.53 (D)
E
SPECIFIC DESIGN MAY NOT MATCH PROTOTYPICAL DESIGN.
R
H
REM
NOTE: THE SITE-ADAPT CONSULTANT IS RESPONSIBLE FOR DETERMINING IF
1 #6 CU BOND &
1 #6 CU BOND &
1 #6 ISOL. GND
1 #6 ISOL. GND
(2) 2"C-4 #3/0 &
1 #6 CU BOND
THE SITE-SPECIFIC SWITCHGEAR PACKAGE FALLS WITHIN A JURISDICTION
Q
3/4"C-1 #2/0 CU GND PER 7
2"C-4 #1/0 &
2"C-4 #3/0 &
2"C-4 #3/0 &
C
THAT REQUIRES EUSERC-COMPLIANT METERING EQUIPMENT.
OFFICE N.E.C. ARTICLE 250.66
E
T.T.B.
T
SPACE
SPACE
R
OUTDOOR ENCLOSURE
I
NEMA 3R
U T T SW
6 PNL. PNL. PNL.
P
T
"A" "B" "D"
A
#6 CU TO 1 EVO
"MSB" GND BUS EQUIPMENT
.A E
CABINET SEE KEYNOTE 6/E2.1 FOR VARIATIONS. CONSULTANT'S
.G I H
D SE NS L
(FURNISHED
.S H
BY OTHERS) SEAL
TE E O A
1
4 TO LOCAL PHONE SERVICE
T
3
A H TI IC
65KAIC, UNDERGROUND
F
PULL SECTION PER
SERVING UTILITY COMPANY
R T C R
SPECIFICATIONS.
.P
C
TE RO IS LE
INCOMING SERVICE LATERAL
TO UTILITY TRANSFORMER
I
IN F R E
D
N T JU E
TO PANELS "A", "B", "D", "H" & DUAL-LINE EQUIPMENT CABINET C MISC. CHANGES 9.06.13
D MISC.CHANGES 10.25.13
M
E H IN T
UNDERGROUND FEEDERS
IR S D S
U IS SE OW
NOTE: CONFIRM DIMENSIONS WITH SUPPLIER
G
SERVICE ENTRANCE EQUIPMENT ELEVATION - EUSERC PACKAGE E SINGLE LINE DIAGRAM B
1. THERE SHALL BE U.L. LISTED SERIES RATING BETWEEN CKT. BREAKERS LOCATED AT THE DISTRIBUTION 1 WIRE ISOLATED GROUND TO ISOLATION GROUND BUS IN PANEL AND LAND ISOLATED GROUND TO SINGLE
EQ TH U SH
PANEL AND THE DOWNSTREAM 10k A.I.C. RATED CIRCUIT BREAKERS AT PANELS "A", "B" DUAL-LINE POINT GROUND. "DO NOT COMBINE COMMON GND TO ISOLATED GROUND". CONTRACT DATE: XX.XX.XX
A EE
2X4 FLUORESCENT FIXTURE NIGHT LIGHT FUSIBLE DISCONNECT SWITCH EQUIPMENT CABINET BASED ON THE MAXIMUM FAULT CURRENT AS DETERMINED AT THE SERVICE
WITH STARTER BUILDING TYPE: LIVE MAS MEDIUM54
ENTRANCE. AND DOWNSTREAM 22K A.I.C. RATED CIRCUIT BREAKERS AT PANEL "D." 2 6 BUILDING MAIN DISCONNECT FOR THIS SERVICE:
S CEILING MOUNTED SPEAKER (MAXIMUM 6 MAINS PER N.E.C.) PLAN VERSION: March 2013
FUSED DISCONNECT SWITCH
2X4 FLUORESCENT FIXTURE 2. THE NFPA-70 'SIX SWITCH' MAXIMUM RULE SHALL APPLY AT THE POINT AT WHICH THE SERVICE ENTERS LABEL EACH MAIN BREAKER AS INDICATED: "MAIN 1 OF 6" (ENGRAVED LETTERS x 3/4" HIGH)
S THE BUILDING AS DEFINED BY NFPA-70 (CURRENT EDITION IN FORCE AT THIS SITE). NOTIFY ENGINEER SITE NUMBER: XXX-XXX
WALL MOUNTED SPEAKER "MAIN 2 OF 6"
T
WITH BATTERY PACK
NON-FUSED DISCONNECT SWITCH WHERE LOCAL CONDITIONS REQUIRE ALTERNATE LOCATIONS OR SINGLE POINT DISCONNECT. "MAIN 3 OF 6" STORE NUMBER: XXXXX
J JUNCTION BOX "MAIN 4 OF 6"
O ET AL E
PHOTOCELL 3. SEE SCOPE OF WORK FOR DETAILS REGARDING OWNER SUPPLIED AND/OR INSTALLED PRODUCTS. "MAIN 5 OF 6"
1X4 FLUORESCENT FIXTURE J WALL MOUNTED JUNCTION BOX GENERAL CONTRACTOR IS RESPONSIBLE FOR ALL OTHER ASPECTS OF THE PROJECT "MAIN 6 OF 6" TACO BELL
N L IC HE
Y
TELEPHONE OUTLET RAIN SENSOR 4. IF UTILITY COMPANY PROPOSES A SERVICE DIFFERENT FROM THAT ILLUSTRATED, CONTACT THE 3 EQUIPMENT CABINET IS FURNISHED WITH EVO LINE.
1X4 FLUORESCENT FIXTURE CONSTRUCTION ENGINEER FOR A DECISION BEFORE PROCEEDING. COORDINATE AVAILABLE SHORT 123 MAIN STREET
WITH BATTERY PACK DEDICATED GROUNDED OUTLET
L
FLUORESCENT WALL MOUNT FIXTURE CIRCUIT CURRENT W/ LOCAL UTILITY AND PROVIDE CIRCUIT BREAKERS W/ SUFFICIENT INTERRUPTING 4 ANYTOWN, USA 98765
PROVIDE 2" CONDUIT STUBBED INTO BUILDING FROM LATERAL POLE FOR TELEPHONE.
DUPLEX GROUNDED OUTLET CAPACITY.
D P S
DOWNLIGHT FIXTURE EMERGENCY LIGHT 5 VERIFY AVAILABLE FAULT CURRENT AT SERVICE ENTRANCE WITH THE UTILITY CO. TO CONFIRM 65 kAIC
DOUBLE DUPLEX GROUNDED OUTLET 5. COORDINATE CT METERING COMPARTMENT SIZE WITH LOCAL UTILITY COMPANY, THE LOCAL ELECTRICAL RATED EQUIPMENT IS SUFFICIENT.
SUSPENDED DOWNLIGHT FIXTURE GROUND FAULT DUPLEX OUTLET INSPECTOR AND THE NATIONAL ELECTRICAL CODE TO MEET ALL REQUIREMENTS BEFORE PURCHASE
SINGLE POLE, SINGLE THROW
TY IS
AND INSTALLATION. NEW METER BY LOCAL UTILITY COMPANY. 6 (3) 5/8" DIA. x 10'-0" COPPER CLAD GROUND RODS. INSTALL 10'-0" APART AND CONNECT GROUND SYSTEM
GROUND FAULT DUPLEX W/ BOTT. HALF SWITCHED TOGGLE SWITCH
PENDANT MOUNTED LIGHT FIXTURE PER N.E.C. ARTICLE 250.
GROUND FAULT DEDICATED OUTLET 6. ALL WIRING SHOWN SHALL BE COPPER TYPE "THHN/THWN" EXCEPT FEEDERS FROM UTILITY
E
SINGLE POLE, SINGLE THROW TOGGLE TRANSFORMER TO SWITCH BOARD MAY BE ALUMINUM. 7 INSTALL UNDERGROUND SERVICE LATERAL TO UTILITY TRANSFORMER PER SERVING UTILITY COMPANY
LIVE MAS
TH
TRACK MOUNTED CEILING DUPLEX OUTLET SWITCH W/ PILOT LIGHT
PENDANT LIGHT FIXTURE SPECIFICATIONS. 4#350kcmil IN EACH OF (2) 3"C. TO PAD MOUNT TRANSFORMER. GC / ELECT.
7. ARMOR CABLE ACCEPTABLE FOR THE LAST 6'-0" FROM A JUNCTION BOX TO LIGHT FIXTURES. ARMOR CONTRACTOR SHALL COORDINATE SERVICE POLES PER LOCAL UTILITY CODE. IF ALUMINUM
DUPLEX ISOLATED GROUND OUTLET R RELAY MEDIUM54
DIRECTIONAL FIXTURE CABLE IS NOT ALLOWED FOR NON-ACCESSIBLE FLOORS, WALLS AND CEILINGS. CONDUCTORS ARE USED PROVIDE 4#500kcmil IN EACH (2) 3-1/2"C.
FIXTURE, TRACK MOUNTED DOUBLE DUPLEX ISOLATED GROUND OUTLET
CONDUIT RUN, UNDERGROUND
R
DIRECTIONAL FIXTURE, DEDICATED ISOLATED GROUND
TRACK MOUNTED TO
UNDERSIDE OF INTERIOR CANOPY SPECIAL PURPOSE OUTLET SMOKE DETECTOR RISER
E
CEILING SPECIAL PURPOSE OUTLET DIAGRAM
T
COOLER FIXTURE EXTERIOR WALL FIXTURE
ELECTRICAL PANEL. SEE
EXIT SIGN (WALL MOUNTED)
SHEET E2.1 FOR PANEL SCHED.
EXTERIOR DECORATIVE WALL FIXTURE
AND LEGEND
HOLD UP EMERGENCY BUTTON
EUSERC
ELECTRICAL MOTOR
E2.0
EXIT SIGN (CEILING MOUNTED) EXTERIOR DECORATIVE WALL FIXTURE
DUCT MOUNTED SMOKE DETECTOR
SECURITY STROBE WPG WEATHERPROOF GROUND FAULT
c CONNECTION TO EQUIPMENT
PLOT DATE:
ELECTRICAL LEGEND F GENERAL NOTES D KEY NOTES C
PHASE
PHASE
CIRCUIT GRND # WIRES A&E WATTS TRIP TRIP WATTS A&E # WIRES GRND CIRCUIT CIRCUIT GRND # WIRES A&E WATTS TRIP TRIP WATTS A&E # WIRES GRND CIRCUIT
LOAD
LOAD
LOAD
LOAD
POLE
POLE
POLE
POLE
NO. WIRE & NO. LOAD DESCRIPTION AMPS AMPS LOAD DESCRIPTION NO. & WIRE NO. NO. WIRE & NO. LOAD DESCRIPTION AMPS AMPS LOAD DESCRIPTION NO. & WIRE NO.
SIZE SIZE A B C A B C SIZE SIZE SIZE SIZE A B C A B C SIZE SIZE
D-1 #12 3 #12 W-075 WALK-IN COOLER M 1621 20 - A - - 0 - SPACE - - - D-2 A-1 #12 2 #12 S-530 BEVERAGE DISPENSER D/T K 420 20 1 A 1 20 1780 K ICE TEA EQUIPMENT S-546 2#12 #12 A-2
LOG TO NG -
D-3 - - - - M 1621 - - B 1 20 0 - SPARE - - - D-4 A-3 #12 2 #12 S-533 BEVERAGE DISPENSER S/S K 480 20 1 B 1 20 1200 M POS/ORDER ENTRY TERMINALS (2) & U-070 (2) U-100 2 #12 #12 A-4
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
D-5 - - - - M 1621 - 3 C 1 20 0 - SPARE - - - D-6 A-5 #12 2 #12 R-030 HALF HEIGHT FREEZER K 600 20 1 C 1 20 360 M SAFE W/AUDIT LOCK IG / FUTURE F-174 F-171 2 #12 #12 A-6
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
D-7 #10 3 #10 W-075 WALK-IN FREEZER M 1321 15 - A 1 20 500 M MUSIC SYSTEM (MUZAK) F-131 2#12 #12 D-8 A-7 - - - SHUNT TRIP BREAKER - - 20 1 A 1 20 864 K CARBONATOR S-570 2 #12 #12 A-8
O
R ELEMENTS
D-9 - - - - M 1321 - - B 1 15 264 M ICE MAKERS S/S & D/T (2) S-513 2 #12 #12 D-10 A-9 #10 2 #10 P-450 HOT WATER DISPENSER K 2013 30 - B 1 20 1200 M POS/ORDER ENTRY TERM (1) & U-070 (1) U-100 2 #12 #12 A-10
T'S PRIOR
D-11 - - - - M 1321 - 3 C - 20 1306 M ICE MACHINE CONDENSER S-513 2 #10 #10 D-12 A-11 - - - - K 2013 - 2 C - - 0 - SPACE - - - A-12
R PSITE-SPECIFIC
D-13 - - - SPARE - 0 20 1 A 2 - 1306 M - - - - D-14 A-13 #12 2 #12 S-004 HEATED CABINET K 1920 20 1 A 1 20 600 M CCTV DVR & MONITOR U-022 2 #12 #12 A-14
- - - - 1 B -
REGIONAL ARCHITECTURAL PARTNER (RAP)
D-15 SPARE 0 20 20 1306 M ICE MACHINE CONDENSER S-513 2 #10 #10 D-16 A-15 #12 2 #12 F-040 OFFICE COMPUTER M 300 20 1 B 1 20 1200 M POS/ORDER ENTRY TERM (2) & U-070 (1) U-100 2 #12 #12 A-16
- - - - - - - -
IMAGE
D-17 SPARE 0 20 1 C 2 1306 M - D-18 A-17 #12 2 #12 U-048 OFFICE SECURITY SYSTEM 1 M 300 20 1 C 1 20 864 M D/T TIMING SYSTEM S-204 2 #12 #12 A-18
RIO
KITCHEN OPERATIONS MUST BE APPROVED
D-19 #12 2 #12 N-040 POWER SOAK K 1169 15 - A - 20 246 H EF-1 - 2 #12 #12 D-20 A-19 - - - SPACE - 0 - - A 1 20 864 K CARBONATOR S-570 2 #12 #12 A-20
- - - - 2 B - - - SPARE - - -
CONSTRUCTION.
D-21 - K 1169 0 D-22 A-21 #12 2#12 S-240 ORDER CONFIRMATION BOARD/SWITCH BOX M 130 20 1 B 1 20 480 M DT COMM SYS BASE STATION U-024 2 #12 #12 A-22
L
NSTHE
- - SPARE - - - -
ITH MEFOR
U
D-23 #12 2 #12 E-272 HOOD FIRE SUPPRESSION SYSTEM 1 M 720 20 1 C 3 0 D-24 A-23 #12 2 #12 SPACE M 0 20 1 C 1 20 360 K RETHERMALIZER C-105 2 #12 #12 A-24
D-25 #12 2 #12 - IRRIGATION TIMER M 360 20 1 A 1 20 1800 M UTILITY RECEPTACLE - 2 #12 #12 D-26 A-25 #12 2 #12 S-540 PEPSI BOOSTER TANK/CO2 MONITOR M 540 20 1 A 1 20 - - SHUNT TRIP BREAKER - - - A-26
MODIFICATIONS THAT CHANGE
JURISDICTIONAL REQUIREMENTS
D-27 #12 2 #12 - ROOF RECEPTACLES M 540 20 1 B 1 20 448 H EF-2 2 #12 #12 D-28 A-27 - - - SPACE - 0 - - B 1 20 420 M TIMER C-400 2 #12 #12 A-28
O
CE WENGINEER I
D-29 #12 2 #12 B-215 WATER HEATER IGNITION M 180 20 1 C - - - - SPACE - - - D-30 A-29 - - - SPACE - 0 - 1 C 1 20 - - SHUNT TRIP BREAKER - - - A-30
C
D-31 #8 3 #4 - RTU-1 H 5362 60 - A - - 0 - SPACE - - - D-32 A-31 - - - SPACE - 0 20 1 A - - - - SPACE - - - A-32
THITEMPLATE
D-33 - - - - H 5362 - - B 1 20 540 M UTILITY RECEPTACLES - 2 #12 #12 D-34 A-33 - - - SPACE - 0 20 1 B 1 20 600 M KITCHEN MONITORS (2) - IG U-201 2 #12 #12 A-34
MUST BEIS
D-35 - - - - H 5362 - 3 C - - 0 - SPACE - - - D-36 A-35 #10 2 #10 P-450 HOT WATER DISPENSER K 2013 30 - C - - - - - SPACE - - - A-36
D
ARCHITECT AND/OR
D-37 #8 3 #3 - RTU-2 H 8880 80 - A 1 20 1120 M UTILITY RECEPTACLE/VSAT (F-050 & U-061) - 2 #12 #12 D-38 A-37 - - - - K 2013 - 2 A 1 20 - - SHUNT TRIP BREAKER - - - A-38
S
D-39 - - - - H 8880 - - B - 30 3120 K FROZEN BEVERAGE DISPENSER S-639 2#10 #10 D-40 A-39 - - - - - 0 20 1 B 1 20 732 K FRYER C-015 2#12 #12 A-40
DOCUMENT
PLA
D-41 - - - - H 8880 - 3 C 2 - 3120 K - - - - D-42 A-41 #12 2 #12 S-005 HEATED CABINET K 1920 20 1 C - - - - SHUNT TRIP BREAKER - - - A-42
DRAWINGS
18713 18893 18084 4972 5678 5732 4893 2923 6846 4108 5832 1584
THESE
E
HVAC EQUIPMENT = 43420 W
R
WATTS: BUS A 23685 KITCHEN EQUIPMENT = 8578 x 0.65 = 5576 W PANEL D ELECTRICAL DATA 120/208V PANEL TYPE NQOD WATTS: BUS A 9001 PANEL A ELECTRICAL DATA 120/208V PANEL TYPE NQOD
REM
BUS B 24571 OTHER LOADS (MISC.) = 20074 W MOUNTING FLUSH MAINS 400A M.L.O. PHASE BUS B 8755 KITCHEN EQUIPMENT = 17992 x .65 = 11695 W MOUNTING FLUSH MAINS 225A M.L.O. PHASE
BUS C 23816 LIGHTING = 0 x 1.25 = 0 W NEUTRAL BUS AMPACITY 400A GROUND BUS AMPACITY 225A BUS C 8430 OTHER LOADS (MISC.) = 8194 W NEUTRAL BUS AMPACITY 225A GROUND BUS AMPACITY 225A
TOTAL 72072 TOTAL LOAD= 69070 W A.I.C. RATING 65KAIC SERIES RATED UTILIZING 22KAIC CIRCUIT BREAKERS TOTAL 26186 TOTAL LOAD= 19869 W A.I.C. RATING 65KAIC SERIES RATED UTILIZING10KAIC CIRCUIT BREAKERS
TOTAL CURRENT= 191 A TOTAL CURRENT= 55 A
PANEL D KITCHEN EQUIPMENT PANEL A
PHASE
CIRCUIT GRND # WIRES A&E WATTS TRIP TRIP WATTS A&E # WIRES GRND CIRCUIT
LOAD
LOAD
POLE
POLE
NO. WIRE & NO. LOAD DESCRIPTION AMPS AMPS LOAD DESCRIPTION NO. & WIRE NO.
SIZE SIZE A B C A B C SIZE SIZE
B-1 #12 2 #12 - KITCHEN LIGHTS 5 L 1069 20 1 A 1 20 0 - SPACE - - - B-2
B-3 #12 2#12 - SPARE H 0 20 1 B 1 20 657 L DINING ROOM LIGHTS 4 - 2#12 #12 B-4
- - SPACE - - -
CONSULTANT'S
B-5 #12 2 #12 COOLER/FREEZER LIGHTS 5 L 800 20 1 C 1 20 0 B-6
B-7 - - - SPARE M 0 20 1 A 1 20 1076 L INTERIOR MENU BOARD & REMOTE ALARM LT L-013 2 #10 #10 B-8
SEAL
B-9 #10 2 #10 - OUTSIDE LIGHTS 2 L 618 20 1 B - - 0 - SPACE - - - B-10
B-11 - - - SPARE - 0 20 1 C - - 0 - SPACE - - - B-12
B-13 - - - SPARE - 0 20 1 A - - 0 - SPACE - - - B-14
B-15 #10 2#10 - MENU BOARD @ D/T 2 L 500 20 1 B - 20 1623 L PARKING LIGHTING 2 3 - 2 #10 #10 B-16
B-17 - - - SPARE - 0 20 1 C 2 - 1623 L - - - - B-18
B-19 #12 2 #12 - SHOW WINDOW L 1200 20 1 A - 20 1623 L PARKING LIGHTING 2 3 - 2 #10 #10 B-20
B-21 #12 2 #12 - SHOW WINDOW L 1200 20 1 B 2 - 1623 L - - - - B-22
B-23 #12 2 #12 - SHOW WINDOW L 1200 20 1 C - 20 1623 L PARKING LIGHTING 2 3 - 2 #10 #10 B-24
B-25 #12 2#12 - SHOW WINDOW L 1200 20 1 A 2 - 1623 L - - - - B-26
B-27 #10 2 #10 - BUILDING SIGNS 2 L 1200 20 1 B 1 20 0 - SPARE - - - B-28
B-29 #10 2 #10 - PYLON SIGN 2 L 1200 20 1 C 1 20 0 - SPARE - - - B-30
B-31 #10 2 #10 - DIRECTIONAL SIGNS 2 L 1200 20 1 A - - 0 - SPACE - - - B-32
B-33 #12 2#12 - LIGHTING CONTROLS 1 - 500 20 1 B - - 0 - SPACE - - - B-34
B-35 #12 2#10 - BUILDING SIGNS 2 L 360 20 1 C - - 0 - SPACE - - - B-36
B-37 - - - SPARE L 0 20 1 A - - 0 - SPACE - - - B-38 A 03-08-2013
B-39 - - - SPARE L 0 20 1 B - - 0 - SPACE - - - B-40 B 05-31-2013
B-41 #10 2#10 - BUILDING SIGNS 2 L 1200 20 1 C - - 0 - SPACE - - - B-42 C MISC. CHANGES 9.06.13
4669 4018 4760 4322 3903 3246
D MISC.CHANGES 10.25.13
WATTS: BUS A 8991 LIGHTING = 24918 x 1.25 = 31148 W PANEL B ELECTRICAL DATA 120/208V PANEL TYPE NQOD
BUS B 7921 OTHER LOADS (MISC.) = 0 W MOUNTING FLUSH MAINS 225A M.L.O. PHASE
BUS C 8006 TOTAL LOAD= 31148 W NEUTRAL BUS AMPACITY 225A GROUND BUS AMPACITY 225A
TOTAL 24918 TOTAL CURRENT= 87 A A.I.C. RATING 65KAIC SERIES RATED UTILIZING10KAIC CIRCUIT BREAKERS
NOT USED H LIGHTING PANEL B
PANEL LIGHTING KITCHEN EQUIP. HVAC MISCELLANEOUS CONNECTED DEMAND CONTRACT DATE: XX.XX.XX
(W) ** (W) *** (W) (W) LOAD LOAD (W)
BUILDING TYPE: LIVE MAS MEDIUM54
A - 11695 - 8194 26186 19869 GENERAL NOTE:
PLAN VERSION: March 2013
B 31148 - 0 24918 31148 LIGHTING CIRCUITS INSIDE THE BUILDING SHALL BE WIRED THRU
EQUIP. CABINET - 47664 - 2400 50064 33382 LIGHTING CONTACTORS. REFER TO DETAILS ON SHEET E6.0. SITE NUMBER: XXX-XXX
D - * 5576 43420 20074 72072 69070 STORE NUMBER: XXXXX
KEY NOTES:
1 PROVIDE LOCK-ON BREAKER.
TACO BELL
2 CIRCUITS TO BE WIRED THRU EXTERIOR LIGHTING CONTROL RELAY. SEE
TOTAL 31148 64935 43420 30428 173240 153469 DETAIL 8/E6.0. 123 MAIN STREET
ANYTOWN, USA 98765
3 FOR PARKING LOT LIGHTS AND OUTSIDE SIGNS: PROVIDE (5) 3/4"C FROM
PANEL "B" AND STUB OUT 10'-0" AWAY FROM THE BUILDING. VERIFY EXACT
* 8570 x 0.65 = 5576 LOCATION OF STUB PRIOR TO ROUGH-IN. LOADS MAY VARY WITH
LOCATION -- VERIFY. VERIFY OUTDOOR VOLTAGE DROP FOR ALL PARKING
153469 426 A LIGHTING CIRCUITS.
LARGEST MOTOR LOAD = 2379 W
4 CIRCUITS TO BE WIRED THRU THE LIGHTING CONTROL RELAY-FRONT.
SEE DETAIL 18/E6.0.
5 CIRCUITS TO BE WIRED THRU THE LIGHTING CONTROL RELAY-REAR. SEE
LIVE MAS
MEDIUM54
DETAIL 18/E6.0.
***KITCHEN EQUIPMENT DEMAND
PANEL
LOAD KEY LEGEND
LOAD APPLICABLE
FACTORS PER NEC 2011 SECTION
220.56 ALLOWS FOR PERCENTAGES
SCHEDULES
DESCRIPTION FACTOR WITHIN EACH PANEL ACCORDING
TO THE FOLLOWING EQUIPMENT AND LOAD
L LIGHTING 125% **
QUANTITIES:
K KITCHEN EQUIPMENT 65% *** 1 - 100%; 2 - 100%; 3 - 90%; 4 - 80%; SUMMARY
H HVAC 100% 5 - 70%; 6 AND OVER - 65%.
E2.1
THESE PERCENTAGES DO NOT
M MISC. EQUIPMENT 100% CARRY OVER INTO THE LOAD
SUMMARY, WHICH IS CALCULATED
AT 65% REGARDLESS.
PLOT DATE:
NOT USED LOAD SUMMARY & LEGEND NOT USED C GENERAL NOTES & KEY NOTES
G
38'-0 1/2" (+48")
13'-5 1/2" (+78")
8'-10 1/2" (@ FRONT
14
EDGE OF HOOD)
36'-3" (+84")
28'-11" (+110")
8'-1 1/2" (+18")
34'-9" (+18")
12'-3" (+18")
30'-9" (+110")
27'-7" (+110")
26'-5" (+110")
A6.4
11'-5" (+78")
10'-3" (+18")
F.O. STUD
G
A-10
F.O. STUD F.O. STUD F.O. STUD
J J A-24
A-22 (+66") 1'-0" (+18") 3
FACE OF STUD
1'-3" A-3 D-10 A-20
A-40
D-23
ENLARGED
A-5
D-28
1'-9" E3.1
A-16 (+24") D-38 PLAN
2'-1" A-10 (+24")
ADT
A-8 (+18") 3'-6" (CLG MTD)
4'-1" A-34
D-10 (+84")
DEMARC
A-28
G
G A-1 (+48")
5'-1"
D-26 (+24")
A-34 7'-10" A-34 2'-2" 13'-921"
8 6'-4" A-2 (+38")
G
7'-0" D-40,42
NEMA F.O. STUD A B D
L6-20R (+48") 13'-9 1/2" A-41
J 1
(CLG) 9'-8 1/2" 6
9'-1"
2'-0"
(CLG MTD) J J
10'-9" (+24") C
L OF EVO
LINE 10'-3"
3'-2 1/2" (+84")
A-13 c
D-38 CONSULTANT'S
5'-5" (+84")
D-34 7'-5 1/2" (CLG MTD)
11'-2 3/8" (+18") A-9:11 A-35:37 EXTERIOR LIGHTING
B-8
F.O. STUD
D-38
2
(+106") 3 CONTROL RELAY PANEL SEAL
4 SEE DETAIL 8/E6.0
G
B-8
A-4 B-8
7'-8" (+24")
6'-11" (+24") G
6
CT & METER
D-38 J
5'-1" (+24") F.O.
2
4'-4" (+24") A-14 STUD
A-4 c 18'-9"
6" D-19:21
(+18")
MSB
A-25
F.O. STUD 5'-6 1/2" F.O. STUD
4'-6 1/2" (+72")
F.O. STUD 35'-2" (+18") 5 D-29
1'-3 1/2"
A-25 C MISC. CHANGES 9.06.13
D-34 F.O. STUD D
G PROTOTYPE UPDATES 1.30.14
6'-1 1/2" (+ 18")
1'-10" (+72")
F.O. STUD
NOTE: IN LIEU OF GFCI OUTLETS YOU CAN USE GFCI CIRCUIT CONTRACT DATE: XX.XX.XX
BREAKERS TO SAVE COSTS. BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
POWER PLAN 1/4"=1'-0" A
1 REFER TO ROOF PLAN.
TACO BELL
A. ALL DIMENSIONS TO J-BOXES ARE FROM FACE OF STUD TO CENTER OF BOX, U.O.N. J. ELECTRICAL EQUIPMENT ENCLOSURES SHALL BE NEMA-1 FOR INTERIOR AND NEMA
3R FOR EXTERIOR. IN COASTAL REGIONS THE STANDARD FOR OUTSIDE SHALL BE
2 INSTALL IN CONDUIT RUNNING ON SURFACE OF KITCHEN SIDE OF CABINETRY REAR WALL. 123 MAIN STREET
B. ALL CONDUIT DROPS ARE INSIDE WALLS U.O.N. SEE ARCH. DWGS FOR WALL DIMS. NEMA-4X.
ANYTOWN, USA 98765
3 CONNECT PRODUCTION LINE CIRCUIT BREAKER PANEL VIA UTILITY CHASE IN CEILING TO A 3
C. ALL J-BOX CIRCUITS, CONDUITS, FIXTURES, ETC. SHALL BE AS INDICATED ON THE K. PER SECTION 210.8(B)(3) NEC 2002, ALL 15 AND 20A, 120V RECEPTACLES IN
POLE, 200 AMP CIRCUIT BREAKER IN MAIN SWITCHBOARD. SEE SHEET E2.0. VERIFY ALL
ELECT. DWGS AND SPECS. COMMERCIAL KITCHENS ARE REQUIRED TO BE GFCI PROTECTED. THIS INCLUDES
REQUIREMENTS WITH ACTUAL EQUIPMENT SPECIFIED. THE MANUFACTURER WILL FULLY
ISOLATED GROUND RECEPTACLES.
PRE-WIRE THE COMPLETE MAPS LINE AT THE FACTORY. THE UNITS WILL THEN BE PULLED
D. CONTRACTOR SHALL VERIFY UNDERGROUND CONDUIT LOCATIONS PRIOR TO APART FOR SHIPPING PURPOSES. ALL CONNECTION POINTS WILL BE MARKED. THE
POURING SLAB. L. DO NOT MEASURE/LOCATE OUTLETS ON DRAWINGS. USE DIMENSIONS PROVIDED. CONDUIT RUNS WILL BE COILED UP FOR FIELD INSTALLATION. SOME ELECTRICAL
COMPONENTS MAY BE REMOVED FOR EASE OF DISASSEMBLING THE LINE-UP. THE
E. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO COORDINATE THIS DATA ON THE M. CONDUIT MAY RUN UNDER SLAB AT G.C.'S DISCRETION. ELECTRICAL CONTRACTOR WILL BE FULLY RESPONSIBLE FOR MAKING THE PROPER FIELD
LOCATION OF ELECT. ROUGH-INS WITH INFO PROVIDED ON THE ARCH. AND STRUCT.
DWGS AND THE EQUIPMENT ACTUALLY SUPPLIED, AND TO CONFIRM THE
CORRECTNESS OF ANY DIMENSIONS HEREIN.
N. E.C. SHALL PROVIDE A PREPRINTED SELF-ADHESIVE LABEL ON ALL POS RECEPTACLES
STATING "POS USE ONLY".
CONNECTIONS FROM THE ROUGH-IN LOCATION TO THE MANUFACTURER PROVIDED
BREAKER PANEL BOX. IN ADDITION, THE ELECTRICAL CONTRACTOR WILL BE RESPONSIBLE
FOR ANY SPLICE POINTS AND/OR JUNCTION BOXES THAT NEED TO BE RECONNECTED.
LIVE MAS
MEDIUM54
SOME ELECTRICAL COMPONENT ASSEMBLY MAY ALSO BE REQUIRED.
F. LOCATIONS OF ALL OUTLETS MAY BE RELOCATED TO NEAREST STUD. DO NOT CUT O. PROVIDE ESCUTCHEON PLATES AND SEALANT AT ALL UTILITY PENETRATIONS INTO
INTO STUDS. WALLS, CEILING, AND FLOORS. DO NOT USE CAULKS OR EXPANSION FOAM FOR 4 EQUIPMENT CABINET.
SEALANT.
G. FOR EXACT LOCATIONS OF KITCHEN & MECHANICAL EQUIPMENT AND POINTS OF 5 LOCATED INSIDE SHELL OF HEATER.
CONNECTION, REFER TO KITCHEN & MECHANICAL EQUIPMENT DRAWINGS AND P. ARMOR CABLE (BX) ALLOWED WHERE ACCEPTABLE BY CODE. ALL WIRE SHALL BE
MANUFACTURER'S SHOP DRAWINGS. CONCEALED O.N.U. 6 INSTALL CONTROL CABLE FROM FREEZER/COOLER FAN COIL TO ROOF MOUNTED
CONDENSOR.
POWER
H. ALL CIRCUIT FEEDERS AND DISCONNECTS SHALL BE SIZED BY NEC.
7 LOCATE SWITCHGEAR PER GUIDELINES ON SHEET A4.1. FLOOR PLAN
I. CONTRACTOR SHALL VERIFY CIRCUIT BREAKER, DISCONNECT SWITCH, STARTER AND
8 PROVIDE BOOST TRANSFORMER (208V, 1-PHASE IN, 240V, 1-PHASE OUT) FOR FROZEN
FUSE SIZES WITH SELECTED EQUIPMENT MANUFACTURER'S SHOP DRAWINGS PRIOR
BEVERAGE DISPENSER.
E3.0
TO PLACING ORDER AND PROVIDE EVERYTHING AS REQUIRED.
9 ABOVE CEILING FOR WALL MOUNTED HME. SEE 16/E3.1
PLOT DATE:
NOT USED N.T.S. E POWER PLAN GENERAL NOTES C KEY NOTES B
THE DEDICATED POS POWER CIRCUIT REQUIRES AN ISOLATED GROUND IN ADDITION TO THE NORMAL COMMON BUILDING GROUND. THE ISOLATED
GROUND WIRE SERVES TWO PURPOSES:
* AS A SAFETY PATH TO GROUND.
* AS A ZERO REFERENCE POINT FOR ALL POS DIGITAL LOGIC. T 03
THE GROUND MUST EXHIBIT THE LOWEST POSSIBLE IMPEDANCE TO MINIMIZE VOLTAGE TRANSIENTS AND NOISE. HM 10 S 12 S 05 T 04
5'-11" (+48")
BE SURE TO:
3'-3" (+48")
3'-6" (+48")
4'-9" (+48")
6'-5" (+48")
F.O. STUD
* USE AN INSULATED CONDUCTOR FOR THE ISOLATED GROUND WIRE.
4'-3"
4'-6"
* RUN THE ISOLATED GROUND WIRE THROUGH THE SAME CONDUIT AS THE HOT AND NEUTRAL WIRES.
10"
* INSTALL ONLY ISOLATED GROUND (IG) TYPE RECEPTACLES.
* CONNECT THE ISOLATED GROUND WIRE TO BUILDING GROUND ONLY AT THE MAIN SERVICE PANEL. F.O. STUD F.O. STUD
* VERIFY THAT IG RECEPTACLES PRE-WIRED IN OWNER SUPPLIED EQUIPMENT HAVE A TRUE ISOLATED GROUND THAT CAN BE TRACED BACK TO THE
8" G A-17 A-17 A-17
BUILDING GROUND AT THE MAIN SERVICE PANEL. A-21 A-15
J D-38
1'-2" (+60")
DO NOT CONNECT THE ISOLATED GROUND WIRE TO THE CONDUIT, JUNCTION BOXES, THE FRAME ON A SUBPANEL, OR ANY OTHER METAL M 03
SURFACE. D-8
2'-2" (+84") V 01
DEDICATED CIRCUITS: DEDICATED CIRCUITS REQUIRE A DEDICATED HOT AND A DEDICATED NEUTRAL THAT ARE NOT SHARED WITH ANY OTHER A-19
CIRCUITS. IG RECEPTACLES MUST BE "PHASE ALIGNED" WITH THE "B" PHASE OF BUILDING SUBPANEL "A". V 01
2'-8" (+48") 1
2'-11" (+48")
ADT
H 01
LIGHTING
COMMON GROUND (EQUIPMENT GND) INSTALLED PER N.E.C. CONTROL 3'-11" (+48")
SECURITY BUTTON ON WALL N.T.S. 5 SWITCH-FRONT A-17
DEMARC
ISOLATED GROUND (IG) (#12 WIRE) 4'-3" S 02
LIGHTING J
4'-6"
ISOLATED GROUND (IG) (#6 WIRE) CONTROL J
S 01
DEDICATED NEUTRAL SWITCH REAR 5'-3" (+24")
A-6
5'-8" (+42") T 02
GND 6'-0" (+18")
A-19
T 01
N 6'-6" (+24")
J
4
D-25 7'-6" (+24")
G
UTILITY NEUTRAL
1'-4" (+80")
F.O. STUD
ISO. EARTH GROUND
GND
CONSULTANT'S
10"
SEAL
01
IG RECEPTACLE IG RECEPTACLE
IR
DEDICATED HOT SUBPANEL
(OR EQUIPMENT SERVICE
CABINET)
NOTE: IN LIEU OF GFCI OUTLETS YOU CAN USE GFCI CIRCUIT
BREAKERS TO SAVE COSTS.
P.O.S. ISOLATED GROUND SYSTEM N.T.S. 14 SECURITY BUTTON UNDER COUNTER N.T.S. 6 ENLARGED POWER AND COMMUNICATIONS PLAN (OFFICE) 1/2" = 1'-0" 3
1 THERMOSTATS CONTROLS.
2 DISPLAY UNIT FOR HM-02.
LV TRANSFORMER 3 DUAL-OUTPUT DETECTOR FOR HM-02. G PROTOTYPE UPDATES 1.30.14
SECONDARY WIRING,
TYP. ISOLATED 4 PHONE JACK FOR MODEM.
IG OUTLET FOR LV GROUND OUTLET
HM 12
TRANSFORMER FOR FOR MONITOR
ETHERNET SWITCH HM 02 (CLG MT'D.)
LV TRANSFORMER
SECONDARY WIRING, HM 07B
TYP. (CLG MT'D.) P 02
TO ROUTER IN HM 11
ISOLATED GROUND OFFICE
OUTLET FOR D/T SYSTEM
WIRE MOLD TO
ABV. CLG, TYP.
IG OUTLET CONTRACT DATE: XX.XX.XX
IG OUTLET FOR DT
HM 08 IG OUTLET FOR
FOR LV TIMER BUILDING TYPE: LIVE MAS MEDIUM54
TRANSFORMER LOW VOLTAGE
MONITOR TRANSFORMER PLAN VERSION: March 2013
HM 03 FOR HM-02 (CLG MT'D.) FOR HME
SITE NUMBER: XXX-XXX
CONTROL UNIT
(WHICH IS STORE NUMBER: XXXXX
LOCATED
BEHIND
LINE OF WORK HM 07A MONITOR) TACO BELL
SURFACE
V 02 123 MAIN STREET
ANYTOWN, USA 98765
S 03
P 04 T 05
LIVE MAS
MEDIUM54
P 07 HM 04 P 04 P 07
ISOLATED GROUND
OUTLET FOR PRINTER
ISOLATED GROUND OUTLET
FOR VSAT & ALT. PAYMENT ENLARGED
AND POS CONDUIT IN WALL (TYP.) SEE ROUTER
SHEET E5.0 SCHEDULE FOR ISOLATED GROUND OUTLET POWER PLAN
SIZE & QTY OF CONDUITS FOR PRINTER AND POS
AND DETAILS
REFER TO COMMUNICATIONS SCHEDULE ON SHEET E5.0 FOR EQUIPMENT DESCRIPTIONS/MOUNTING HTS. E3.1
PLOT DATE:
ENLARGED INTERIOR ELEVATION (D/T WINDOW) 1/2" = 1'-0" 16 NOT USED N.T.S. 8 KEY NOTES N.T.S. A
13
13
CENTER CENTER OVER
BETWEEN D/T WINDOW
14'-3 1/2" (+170")
WINDOWS
5'-1/2" (+152")
CL CL
FACE OF TOWER WALL STUD
B-35 (SIGN) B-35 (SIGN)
B-35 (SIGN)
3'-1 1/2" (+160")
13 J
7
16'-11 1/2" (+142 3/4") B-9 (BUILDING ACCENT) 10
13 J GREEN
B-41 (SIGN) GREEN
RTU 2 RS
11
GREEN c J
1 D-7:9:11
RTU 1 c
D-20 CONSULTANT'S
D-27
D-37:39:41 4 SEAL
2 3 8
D-27 WPG c
1 WPG c
2P, 60A SW, 35A FUSES, J
c J D-1:3:5
NEMA-3R
D-16:18 5
c 2P, 60A
SW, 35A FUSES,
c J NEMA-3R
D-12:14
c
D-31:33:35 5
2 3 8
EF 2
D-28
3
G PROTOTYPE UPDATES 1.30.14
B-27 (SIGN) B-31 (SIGN)
FACE OF TOWER WALL STUD
19'-0" (+142 3/4")
24'-4" (+151.5")
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
13
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
POWER ROOF PLAN 1/4"=1'-0" A
1 PROVIDE CONNECTION FROM RETURN AIR DUCT SMOKE DETECTORS TO MECH
TACO BELL
A. NO CONDUIT SHALL BE FASTENED DIRECTLY TO OR THROUGH ROOFING MEMBRANE.
CONTROL CIRCUIT PER DETAIL 2/E6.0, AND FIRE ALARM SYSTEM (IF PRESENT).
123 MAIN STREET
B. ALL CUTS IN ROOFING MEMBRANE SHALL BE MINIMAL AND IN ACCORDANCE WITH 2 SPECIFIED RTU IS SUPPLIED WITH THRU THE BASE ELECTRICAL CONNECTIONS AND
ROOFING MFR'S AND INSTALLER'S REQ'S. FACTORY INSTALLED HACR CIRCUIT BREAKER WITH WEATHER TIGHT ENCLOSURES ANYTOWN, USA 98765
AND ACCESS THRU SWINGING DOOR.
C. REFER TO MECH. DWGS FOR MECHANICAL EQUIPMENT ELECTRICAL REQ'S. 3 POWER AND CONTROL ENTRY FROM BOTTOM OF UNIT.
D. ALL EXPOSED ELECTRICAL CONDUITS SHALL PENETRATE ROOF MEMBRANE AT PIPE 4 CONNECT TO EF-1 RELAY. SEE LIGHTING PLAN FOR EXACT LOCATION.
HOODS U.O.N.
5 1/2" C, WITH REQ'D CONDUCTORS TO J-BOX IN CEILING ABOVE ICE MACHINE. MAKE
CONNECTION TO ICE MACHINE AND CONDENSING UNIT.
E. REFER TO ELECT. EQUIP. SCHEDULE AND ELECT. ROUGH-IN PLAN.
6 REFER TO POWER PLAN FOR CONTINUATION TO COOLER / FREEZER.
F. ALL CONDUITS FROM EXHAUST FANS SHALL BE ROUTED INSIDE OF CURB.
7 MOUNT PHOTOCELL ON NORTH SIDE OF RTU-2. CONNECT TO EXTERIOR LIGHTING
LIVE MAS
CONTROL PANEL. MEDIUM54
G. ALL CONDUITS TO AND FROM RTU SHALL BE ROUTED INSIDE OF RTU CURB.
COORDINATE WITH RTU MFR RECOMMENDATIONS. 8 RTU'S SHALL BE PROVIDED WITH BUILT-IN DISCONNECT, SINGLE POINT WIRING AND
CONVENIENCE OUTLET.
H. REFER TO GENERAL NOTES SHEET E2.0 FOR IMPORTANT INFORMATION. CONTRACTOR SHALL VERIFY CIRCUIT BREAKER TYPE, STARTER, DISCONNECT
9
SWITCH, AND FUSE SIZE (IF REQUIRED) WITH SELECTED EQUIPMENT
I. ALL WIRING AND CONDUITS SHALL BE CONCEALED. NO CONDUITS PERMITTED TO RUN MANUFACTURER'S SHOP DRAWINGS PRIOR TO PLACING ORDER AND FURNISH AND
EXPOSED ACROSS ROOF DECK. ROUTE ALL CONDUITS THROUGH EQUIPMENT ROOF INSTALL EVERYTHING AS REQUIRED. POWER
CURBS OR ARCHITECT SPECIFIED ROOF PENETRATIONS. RAIN SENSOR.
10
J. ARMOR CABLE (BX) ALLOWED WHERE ACCEPTABLE BY CODE. 11
GREEN
PIPE HOOD FOR ICE MACHINE CONDENSERS. SEE 9/A6.0
ROOF PLAN
12 ELECTRICAL CONTRACTOR SHALL MAKE ALL ELEC. CONNECTIONS INCLUDING ALL
NECESSARY INTERCONNECTIONS BETWEEN THE COMPRESSOR ON THE ROOF &
13
THE EVAPORATOR IN THE ICE MACHINE AS REQ'D. REFER TO THE MFR'S SHOP DWGS
FOR EXACT INSTALL. & INTERCONNECTION RQMTS, PRIOR TO ROUGH-IN INSTALL.
COORDINATE LOCATION OF J-BOX WITH SIGN VENDOR. SEE SCOPE OF WORK. E3.2
PLOT DATE:
NOT USED F NOT USED E NOT USED D POWER ROOF PLAN NOTES C KEY NOTES B
7
8
TB TB
B-9 B-9 (+114")
B-9 B-9 G
TB TB
B-9 B-9
E
B-19 B-19 B-19 B-19 B-1 4
R R R R EM1
L1
B-4 B-4 B-4 B-4 B-1
B-21 B-4
E E
L1 L1 EM1
E B-1 B-1
EM5/B-4 B-4 B-4 B-1
B-1
12
L1 L1 L1 L1 L1 EM4
S
G1 B-4 B-4 B-4 B-4 B-4 B-4
B-4
S 2
1 6 11 a
L1 L1 L1 L1 L1 E
E EM1 a
B-4 B-4 B-4 B-4 R B-4 B-1 B-1 B-1
B-4
L1 E
R
B-4 B-1
B-4 CONSULTANT'S
L1 L1 L1 L1
B-4 B-4 B-4 R B-4 2 SEAL
B-4 E E
L1 a a
L1 B-1 B-1 3 J
R EM2 B-1
B-4 B-5
B-4 B-1
X-1
14 B-9 S
L1
L1
B-4 B-1
L1 L1 L1 L1 L1
S S
B-4 B-4 B-4 B-4 B-4 EM2 B-1
R EM1
B-4 NL E
B-1 B-1
R R R R R
B-4 B-4 B-4 B-4 B-4 L1 L1 L1 L1 L1 S
B-23
B-4 B-4 B-4 B-4 B-4
EM4 G1 EM4 G TB
B-4 B-23 B-25 B-25 B-4 B-4 B-1 B-9
EM5/B-4 EM5/B-4
G PROTOTYPE UPDATES 1.30.14
13 TB TB 13 GENERAL NOTES
X-1 TYP. 5 9 B-9 B-9
14
B-9 A. CONFIRM LIGHTING FIXTURE QUANTITIES WITH SUPPLIER.
B. EMERGENCY AND NORMAL LIGHTING MARKED WITH "NL" SUBSCRIPT SHALL OPERATE
CONTINUOUSLY. PROVIDE UNSWITCHED HOT TO NORMAL AND EMERGENCY BALLAST.
C. EMERGENCY LIGHTING NOT MARKED WITH "NL" SUBSCRIPT SHALL OPERATE UNDER
CONTROL OF LIGHTING SWITCH AS INDICATED. PROVIDE UNSWITCHED CONSTANT HOT
TO EMERGENCY BALLAST AND SWITCHED HOT TO NORMAL BALLAST.
D. ALL CONDUITS ENTERING OR LEAVING COOLER/FREEZER SHALL BE PROVIDED WITH
SEAL-OFF FITTING WITH COMPOUND PER NEC 300-(7a).
E. ALL INTERIOR LIGHTING CIRCUITS TO BE WIRED THRU THE LIGHTING CONTROL RELAYS.
SEE 14 & 18/E6.0.
F. CONTRACTOR TO FIELD VERIFY CEILING TYPE AND PROVIDE PROPER MOUNTING
HARDWARE.
G. ALL FIXTURES SUPPLIED WITH LAMPS.
CONTRACT DATE: XX.XX.XX
LIGHTING PLAN 1/4"=1'-0" A
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
LAMP BALLAST MOUNTING LAMP BALLAST MOUNTING 1 SITE NUMBER: XXX-XXX
NO. QTY LOCATION MFR / CATALOG NUMBER DESCRIPTION VOLT WATT REMARKS NO. QUANTITY LOCATION MFR / CATALOG NUMBER DESCRIPTION VOLT WATT REMARKS PRE-FABRICATED & PRE-FINISHED SOFFIT. REFER TO A7.1 FOR SPECIFICS.
# TYPE TYPE TYPE HT. # TYPE TYPE TYPE HT. .
2 FOR LIGHTING FIXTURES, CONDUIT, CONDUCTORS AND INSTALLATION STORE NUMBER: XXXXX
A NA RESPONSIBILITIES, REFER TO SCOPE OF WORK.
GREEN
3 FIXTURE AND SWITCH FACTORY INSTALLED WITH UNIT. G.C. TO COMPLETE CIRCUITING.
A NA TACO BELL
4 EXHAUST HOOD LIGHT FIXTURES SUPPLIED WITH HOOD AND MTD IN PRE-WIRED
J-BOX. COMPLETE CIRCUITING PER DETAIL 2/E6.0.
B 123 MAIN STREET
5 COORD. J-BOX LOCATION WITH WOOD FRAMING SO IT REMAINS CONCEALED BEHIND ANYTOWN, USA 98765
A 18W PAR38 NA CENTER OF ALIGN BOTTOM OF FIXTURE. VERIFY MOUNTING HEIGHT WITH ARCH. DWGS.
LED BRACKET AT FIXTURE'S MOUNTING
6 OUTLET FOR MENU BOARD: SEE SHEET E3.0. VERIFY POINT OF CONNECTION. 10 LIGHT
18W 9'-2" A.F.F. BRACKET WITH
A PANELS WIRED IN SERIES. G.C. TO MAKE FINAL CONNECTION.
CHANGE IN EIFS
THICKNESS 7 CANOPY DOWN LIGHTS FURNISHED WITH CANOPY. G.C. TO MAKE FINAL CONNECTION.
B
8 J-BOX FOR CANOPY LIGHTS. VERIFY POINT OF CONNECTION. WIRE VIA EXTERIOR
EXTERIOR AGILIGHT #LA-APEX-65K-G2 LED STRIP LIGHT 1 NA LIGHTING CONTACTOR.
NA X1 VERIFY SLAT WALL LED WALL 120 3.28/FT BY SIGN VENDOR
EM5 3
EXTERIOR LIGHTALARMS
CAMN/LX6-DB
EMERGENCY EXTERIOR
EGRESS FIXTURE 2 NA WALL SEE KEY
NOTES
120 18
UNSWITCHED
'HOT'
9 REFER TO ARCHITECTURAL EXTERIOR ELEVATIONS ON A4.0 AMD A4.1 FOR DIMENSIONED
LOCATION OF FIXTURE. LIVE MAS
MEDIUM54
10 SEAL ALL ELECTRICAL CONDUITS INTO THE WALK-IN COOLER. SEE DETAIL 6/E3.1
NA BOLD
11 ALERT LIGHT : ONLY APPLIES WHEN A GEN IV POWER SOAK IS USED. DISREGARD IF
NA GEN III POWER SOAK IS USED. SEE SHEET E3.0 FOR POWER REQUIREMENTS.
12 MOUNT "EM5" AT 8'-6" A.F.G. TO CENTER OF FIXTURE.
13 MOUNT "EM5" AT 8'-0" A.F.G. TO CENTER OF FIXTURE.
LIGHTING
14 REFER TO E3.2 FOR POWER TO FIXTURE "X1". PLAN AND
BALLAST LEGEND BALLAST LEGEND SCHEDULE
A. 20THD ELECTRONIC T8 THERMALLY PROTECTED C.B.M. C. 10 THD ELECTRONIC CLASS B CONSUMER END OF LIFE E. 100W PRESSURE SODIUM HPF A. 20THD ELECTRONIC T8 THERMALLY PROTECTED C.B.M. C. 10 THD ELECTRONIC CLASS B CONSUMER END OF LIFE E. 100W PRESSURE SODIUM HPF
APPROVED CLASS P
B. 90 MINUTE EM PRODUCING 350-450 LUMENS
PROTECTED
D. F CAN 100W METAL HALIDE HPF 60HZ F. 100W METAL HALIDE HPF
APPROVED CLASS P
B. 90 MINUTE EM PRODUCING 350-450 LUMENS
PROTECTED
D. F CAN 100W METAL HALIDE HPF 60HZ F. 100W METAL HALIDE HPF
E4.0
PLOT DATE:
KEY NOTES B
G
2" C.O. FROM TELEPHONE COMPANY
FOR FUTURE HIGH SPEED INTERNET. POINT OF CONNECTION
G
RUN TO ABOVE OFFICE CEILING (UNDERGROUND). INSTALL INSIDE REAR
S 03 WALL AND EXTEND TO ABOVE KITCHEN
CEILING LEVEL
HM 11
O 01
F.O. STUD
HM 07B
HM 02
HM 12
26'-11"
28'-0"
25'-0"
30'-3"
29'-4"
FACE OF STUD FACE OF STUD
J J J J J 6" P 04 3
HM 07A HM 03 HM 08 1'-6" 1'-6" ENLARGED
V 02 E3.1
3'-1" 2'-0" PLAN
P 07 B P 07
3'-1" 2'-4"
T 05
ADT
P 04 H 01
B 4'-2"
DEMARC
J P 03
S 10 AS
P 02 P 02
B
15'-7"
23'-5"
G
S 05 G
S G B
P 07 F.O. STUD S 11
M 01 S 1'-5" TV 02
10"
M 01 F.O. STUD CL J J
TV 02
S 11
B S 09 B
G
S 06
T 05 KP G
12'-2" CONSULTANT'S
S 05 11'-10" H 02
11'-7" TV 01 SEAL
V 02
10'-7"
H 01
T 05
9'-3"
S 05 8'-8"
M 01 M 01
S
S
S 08
F.O. STUD F.O. STUD FS J
F.O. STUD
07
G G PROTOTYPE UPDATES 1.30.14
8'-11"
S 04
COMMUNICATIONS PLAN 1/4"=1'-0" A
HOLD-UP BUTTON (MOUNT 2-1/2" DOOR CONTACT (LINKED TO AUDIO / COM. # EQUIPMENT ITEM ELEVATION REMARKS COM. # EQUIPMENT ITEM ELEVATION REMARKS
BEHIND COUNTER EDGE) VISUAL ALARM) CONTRACT DATE: XX.XX.XX
H 01 UNDER COUNTER HOLD-UP BUTTON SEE DETAIL 6/E3.1. S 02 J-BOX SECURITY SYSTEM +106" A.F.F. 4X4 J-BOX ADJACENT TO T-02 W/ (1) 2" CONDUIT TO S-01.
BUILDING TYPE: LIVE MAS MEDIUM54
S MUSIC SYSTEM SPEAKERS "SOUND ALERT" DEVICE
H 02 WALL MOUNTED HOLD-UP BUTTON +18" A.F.F. SURFACE MTD. 2X4 J-BOX ON INSIDE OF WALK-IN COOLER WALL W/ (1) 1/2" CONDUIT TO ABOVE KITCHEN S 03 J-BOX SECURITY SYSTEM +30" A.F.F. 2X4 J-BOX W/ (1) 1/2" CONDUIT TO ABV. CLG. FOR HOLD-UP BUTTON SIGNAL WIRE
CEILING. BUTTON FACING DOWN. SEE DETAIL 5/E3.1 PLAN VERSION: March 2013
SECURITY STROBE KP KEYPAD (MTD AT 48" A.F.F.) S 04 J-BOX SECURITY SYSTEM +84" A.F.F. 2X4 J-BOX W/ COVER & (1) 1/2" CONDUIT TO ABOVE CEILING.
SITE NUMBER: XXX-XXX
J J-BOX AS ALARM SIREN ABOVE CLG HM 01 NOT USED - - S 05 J-BOX SECURITY SYSTEM +24" A.F.F. 2X4 J-BOX W/ 3/4" CONDUIT TO S-05 AND TO ABOVE CEILING.
STORE NUMBER: XXXXX
2" x 4" J-BOX W/ DATA PORTS BUMP PAD (MOUNT AT FRONT HM 02 D/T TIMER SIGNAL PROCESSOR J-BOX +114" A.F.F. 4X4X4" DEEP (MIN.) J-BOX ABV. CLG. W/ (1) 1" CONDUIT TO HM-07B, (1) 1" CONDUIT TO HM-04, S 06 J-BOX SECURITY SYSTEM +48" A.F.F. 2X4 J-BOX W/ (1) 1/2" CONDUIT TO ABOVE CEILING FOR SECURITY SYSTEM KEYPAD.
B COUNTER) (1) 1-1/2" CONDUIT TO HM-08 & (1) 1" CONDUIT TO HM-12. SEE DET. 16/E3.1.
S 07 J-BOX SECURITY SYSTEM TOP OF JAMB 2X4 J-BOX W/ (1) 1/2" CONDUIT TO ABOVE CEILING FOR DOOR CONTACT.
MOTION DETECTOR
HOOD FIRE SUPPRESSION SYSTEM HM 03 D/T BASE STATION J-BOX +72" A.F.F. 4X4 J-BOX @ D/T BASE STATION W/ (1) 1-1/2" C TO HM-08 & (1) 1-1/2" C TO HM-07A. SEE DET. 16/E3.1.
TACO BELL
FS PULL STATION
S 08 "SOUND ALERT" DEVICE CEILING CONNECT TO SECURITY SYSTEM.
OCCUPANCY SENSOR. CEILING HM 04 D/T COMM SYSTEM J-BOX +18" A.F.F. 4X8 J-BOX W/ (1) 1" CONDUIT TO HM-02, (1) 1" CONDUIT TO HM-07A, (1) 1" CONDUIT TO PICK-UP WINDOW D/T 123 MAIN STREET
LOOP, AND (3) 1" CONDUITS TO D/T MENU BOARD. SEE DET. 16/E3.1. S 09 SECURITY STROBE LIGHT CEILING CONNECT TO SECURITY SYSTEM.
MOUNTED. SEE DETAILS ANYTOWN, USA 98765
1 & 2 / E7.0 HM 05 D/T COMM SYSTEM J-BOX +18" A.F.F. 4X4 J-BOX W/ 1" CONDUITS TO PRE-PAY WINDOW D/T LOOP & D/T WINDOW J-BOX HM-04. SEE DET. 15/E3.1. S 10 ALARM SIREN ABV. CEILING CONNECT TO SECURITY SYSTEM
HM 07A D/T TIMER DISPLAY J-BOX +62" A.F.F. 2X4 J-BOX W/ (1) 1-1/2" CONDUIT TO HM-03 AND (1) 1"C TO HM-04. SEE DET. 16/E3.1. S 11 MOTION / HEAT DETECTOR +78" A.F.F. STUB 1/2" CONDUIT. D5835 OR D5820. MOUNT 90" A.F.F. FOR OFFICE
HM 07B D/T TIMER DISPLAY J-BOX +114" A.F.F. 2X4 J-BOX ABV. CEILING W/ (1) 1" CONDUIT TO HM-02. SEE DET. 16/E3.1. S 12 J-BOX SECURITY DVR +42" A.F.F. 2X4 J-BOX FOR SECURITY DVR.
HM 08 D/T J-BOX +96" A.F.F. 4X4X4" DEEP (MIN.) J-BOX W/ (1) 1-1/2" CONDUIT TO HM-03 & (1) 1-1/2" CONDUIT TO HM-02. SEE DET. 16/E3.1. T 01 TELEPHONE SERVICE BOX PER LOCAL +48" A.F.F. PROVIDE (1) 25 PAIR TELEPHONE CABLE. ONLY (2) LINES TO BE USED. LINE ONE FOR VOICE/FAX.
TELEPHONE COMPANY. PROVIDE 24"X24"X3/4" LINE (2) FOR COMPUTER MODEM.
HM 10 OCB SWITCH +52" A.F.F. 2X4 J-BOX W/ (1) 1" CONDUIT TO ABOVE CEILING PLYWOOD PANEL AT CLG. PROVIDE PULL
COMMUNICATIONS LEGEND D STRING IN 2" CONDUIT.
HM 11 D/T CONTROL UNIT J-BOX +114" A.F.F. 2X4 J-BOX ABV. CEILING W/ (1) 1" CONDUIT TO HM-12 . SEE DET 16/E3.1.
T 02 SECURITY SYSTEM PHONE JACK +106" A.F.F. 2X4 J-BOX ADJACENT TO S-02 W/ RJ-31X PHONE JACK. LIVE MAS
HM 12 D/T ETHERNET SWITCH J-BOX +114" A.F.F. 2X4 J-BOX ABV. CLG W/ (1) 1" CONDUIT TO HM-11, 1" CONDUIT TO HM-02, AND 1" CONDUIT TO OFFICE ROUTER MEDIUM54
A. SUPPLY AND INSTALL OUTLETS AND CONDUIT FOR OWNER SUPPLIED AND INSTALLED T 03 VOICE LINE PHONE JACK +42" A.F.F. 2X4 J-BOX W/ DOUBLE RJ-11 PHONE JACK & 1" CONDUIT TO ABOVE CEILING.
CABLE AND LOW VOLTAGE WIRING (U.O.N.) TELEPHONE AND MUSIC SYSTEM WIRING IR 01 IRRIGATION TIMER +80" A.F.F. 4X4 J-BOX W/ 1" CONDUIT TO IRRIGATION VALVES.
SHALL BE SUPPLIED AND INSTALLED. SEE SCOPE OF WORK SHEETS. T 04 COMPUTER LINE PHONE JACK +42" A.F.F. 2X4 J-BOX W/ RJ-11 PHONE JACK AND 1" CONDUIT TO ABOVE CEILING.
M 01 SPEAKER, CEILING MOUNTED CEILING SPEAKER WIRING FROM SPEAKERS IN DINING ROOM TO AMPLIFIER IN OFFICE. FOR EXACT LOCATION OF
SPEAKERS, SEE LIGHTING PLAN SHEET E4.0. T 05 POS PHONE JACK +24" A.F.F. 2X4 J-BOX W/ 1" CONDUIT TO ABOVE CEILING.
B. SEE SHTS. E3.0 AND E3.1 FOR ELECT. INFO ON POS, SECURITY SYSTEM, CCTV SYSTEM,
(OFFICE) COMPUTER, DRIVE-THRU TIMER AND DRIVE-THRU COMMUNICATION SYSTEM. M 03 MUSIC SYSTEM J-BOX +60" A.F.F. 4X4 J-BOX & COVER W/ (1) 1/2" CONDUIT TO ABOVE CEILING FOR MUSIC SYSTEM. SEE SCOPE OF WORK. CLOSED CIRCUIT TELEVISION (CCTV) CCTV INSTALLATION IS BASED ON THE CRIME INDEX AS DETERMINED BY YUM! LOSS PREVENTION MANAGER.
O 01 (4) 1" DATA CONDUITS U.G. FROM MENU BOARD/SPEAKER POST TO ABOVE CEILING FOR OCB AND D/T COMM. SYST. SEE DET. 16/E6.0.
THE STANDARD CCTV PACKAGE WILL CONSIST OF (1) CCTV MONITOR W/ WALL BRACKET AND (1) MINI-DOME COMMUNICA-
C. THIS PLAN INCLUDES CONDUITS AND J-BOXES FOR POS, SECURITY SYSTEM, CCTV CAMERA MTD. TO BTM OF MENU BOARD BULKHEAD.
SYSTEM, (OFFICE) COMPUTER, TELEPHONE SYSTEM, MUSIC SYSTEM, DRIVE-THRU TIMER
AND DRIVE-THRU COMMUNICATION SYSTEM.
P 02 KITCHEN MONITOR J-BOX @ CLG. 2X4 J-BOX FLUSH @ CEILING. FOR M.A.P.S. LINE MONITOR J-BOX, SEE DETAIL E/E3.0. TIONS PLAN
TV 01 CCTV MONITOR +88" A.F.F. 2X4 J-BOX W/ (1) 1/2" CONDUIT TO ABV. CLG. SEE DTL. 2/E6.0
P 03 KITCHEN MONITOR J-BOX +84" A.F.F. 2X4 J-BOX W/ (1) 3/4" CONDUIT TO ABOVE CEILING.
D. ALL OUTLETS AND BOXES MOUNTED IN THE SERVING COUNTER CABINETRY ARE TO BE TV 02 SECURITY CAMERA +90" A.F.F. MINI-DOME CAMERA MTD. TO BTM. OF MENU BOARD BULKHEAD. 2X4 J-BOX W/(1) 1/2" CONDUIT TO ABOVE
E5.0
P 04 BUMP PAD J-BOX +24" A.F.F. 2X4 J-BOX W/ (1) 3/4" CONDUIT TO P-03. CEILING MTD. ON BACK SIDE OF BULKHEAD.
24" AFF. INSTALL JUNCTION BOXES WITH CONDUIT UNDER CABINET TO NEAREST WALL
AND TO ABOVE CEILING. P 07 POS J-BOX W/ 2-1/2" DIA HOLE IN COVER PLATE +24" A.F.F. 6X6X4" DEEP J-BOX W/ 2-1/2" CONDUIT IN WALL TO ABV. CEILING, WITH PULL STRING FOR POS.
V 01 ALTERNATE PAYMENT ROUTER BOX +90" A.F.F. 4X4 J-BOX W/ 1/2" CONDUIT TO ABOVE CEILING FOR ETHERNET CABLES (DOUBLE JACK)
S 01 J-BOX SECURITY SYSTEM +48" A.F.F. 4X4 J-BOX AT SECURITY SYSTEM CONTROL PANEL W/ (1) 2" CONDUIT TO S-02.
V 02 CREDIT CARD READER (VSAT) +24" A.F.F. 2X4 J-BOX W/ 1/2" CONDUIT TO ABOVE CEILING FOR ETHERNET CABLES.
PLOT DATE:
COMMUNICATIONS NOTES E COMMUNICATIONS ROUGH-IN SCHEDULE B
-
LOG TO NG
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
O
R ELEMENTS
T'S PRIOR
R PSITE-SPECIFIC
REGIONAL ARCHITECTURAL PARTNER (RAP)
IMAGE
R IO
KITCHEN OPERATIONS MUST BE APPROVED
CONSTRUCTION.
L
NSTHE
ITH MEFOR
MODIFICATIONS THAT CHANGE
U
JURISDICTIONAL REQUIREMENTS
O
CE WENGINEER I
C
SERVING AREA LIGHTS
KITCHEN LIGHTS
KITCHEN / RESTROOM LIGHTS
COOLER / FREEZER LIGHTS
THITEMPLATE
MUST BEIS
YES001
D
ARCHITECT AND/OR
DOCUMENT
S
UNDER SLAB CONDUIT 17
P LA
N.T.S.
DRAWINGS
THESE
RE
REM
CONSULTANT'S
FC- 1 2 3 4 5 6 7 8
SEAL
YEW005
LIGHTING CONTROL RELAY - FRONT N.T.S. 18 LIGHTING CONTROL RELAY (REAR) AND HOOD AND HVAC INTERLOCK DETAIL N.T.S. 2
CANOPY
MENU BOARD
CURB
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
" STORE NUMBER: XXXXX
1'-3
SHUNT TRIP DETAIL N.T.S. 3
TACO BELL
0"
5'-
123 MAIN STREET
ANYTOWN, USA 98765
ORDER CONF BOARD.
LIVE MAS
MEDIUM54
NOTE: SOLDER &
INSULATE BOTH
ELECTRICAL
MAG. LOOP CONN.
DETAILS
YES006A
E6.0
PLOT DATE:
DRIVE-THRU COMMUNICATIONS ISOMETRIC N.T.S. 16 EXTERIOR LIGHTING CONTROL RELAY N.T.S. 8 POWER/DATA @ SECURITY MONITOR N.T.S. 4
NEUTRAL
-
LOG TO NG
PROJECTS.
CLA TO MEET ALL STATE AND LOCAL
TANBY A YUM!RBRANDS
REVIEWED AND ADAPTED BY A LICENSED
L
OVEDOCUMENTS ARE PROVIDED AS A CONSTRUCTION
TO P OR
INTI
FOR THIS BUILDING TYPE. THESE
O
O
A
R ELEMENTS
T'S PRIOR
D
R PSITE-SPECIFIC
HOT LOAD
REGIONAL ARCHITECTURAL PARTNER (RAP)
LINE 120VAC,60Hz
IMAGE
NEUTRAL
R IO
KITCHEN OPERATIONS MUST BE APPROVED
CONSTRUCTION.
L
NSTHE
ITH MEFOR
MODIFICATIONS THAT CHANGE
U
JURISDICTIONAL REQUIREMENTS
O
CE WENGINEER I
C
GREEN GREEN
GROUND WATTSTOPPER DW-100 DUAL
THITEMPLATE
TECHNOLOGY WALL SENSOR
MUST BEIS
D
SYMBOL ON PLAN - S
ARCHITECT AND/OR
DOCUMENT
S
P LA
NOT USED N.T.S. 17 NOT USED N.T.S. 13 NOT USED N.T.S. 9
DRAWINGS
THESE
RE
REM
WATTSTOPPER DT-355 LINE VOLTAGE
DUAL TECHNOLOGY CEILING SENSOR
LOAD
L
O HOT SYMBOL ON PLAN -
A
D
NEUTRAL
CONSULTANT'S
LINE 120VAC,60Hz GREEN SEAL
GROUND
GREEN
NOT USED N.T.S. 18 NOT USED N.T.S. 14 NOT USED N.T.S. 10
CONTRACT DATE: XX.XX.XX
BUILDING TYPE: LIVE MAS MEDIUM54
PLAN VERSION: March 2013
SITE NUMBER: XXX-XXX
STORE NUMBER: XXXXX
TACO BELL
123 MAIN STREET
ANYTOWN, USA 98765
LIVE MAS
MEDIUM54
ELECTRICAL
DETAILS
E7.0
PLOT DATE:
You might also like
- Georgetown K-8 Hvac and Fire Alarm Replacement ProjectNo ratings yetGeorgetown K-8 Hvac and Fire Alarm Replacement Project43 pages
- A House Design Drawings in Victoria, AustraliaNo ratings yetA House Design Drawings in Victoria, Australia22 pages
- Cambridge 268 Lester Street Issue For Permit Architecture Drawing 2016-11-18No ratings yetCambridge 268 Lester Street Issue For Permit Architecture Drawing 2016-11-1849 pages
- Shelter For Hot & Dry and Warm & Humid ClimateNo ratings yetShelter For Hot & Dry and Warm & Humid Climate90 pages
- Architectural Mechanical Electrical Structural: M6 Washroom RenovationNo ratings yetArchitectural Mechanical Electrical Structural: M6 Washroom Renovation15 pages
- Technical Data Sheet: MX8534 Standard/Quick Response Extended Coverage ELO Pendent Sprinkler K11.2No ratings yetTechnical Data Sheet: MX8534 Standard/Quick Response Extended Coverage ELO Pendent Sprinkler K11.25 pages
- Field of Dreams Eco Community: Perigree Consulting LLCNo ratings yetField of Dreams Eco Community: Perigree Consulting LLC10 pages
- 06 13025 - S - Torrance Transit Center - Backcheck 1 - Structural - 2017-04-10 PDFNo ratings yet06 13025 - S - Torrance Transit Center - Backcheck 1 - Structural - 2017-04-10 PDF49 pages
- Cagayan de Oro City Cultural Center MuseumNo ratings yetCagayan de Oro City Cultural Center Museum6 pages
- ARD5-RESEARCH (Group7) - MULTI-STOREY-RESIDENTIALNo ratings yetARD5-RESEARCH (Group7) - MULTI-STOREY-RESIDENTIAL18 pages
- DCM - Electrical Drawing-Second Floor Reflected Ceiling Plan - Revision 1No ratings yetDCM - Electrical Drawing-Second Floor Reflected Ceiling Plan - Revision 11 page
- Id Arc 68 05 FF Kids Area Shop DrawingsNo ratings yetId Arc 68 05 FF Kids Area Shop Drawings11 pages
- Front Elevation Right Side Elevation Section Thru Aa: Proposed One-Storey Three Bedroom Residential Building 2No ratings yetFront Elevation Right Side Elevation Section Thru Aa: Proposed One-Storey Three Bedroom Residential Building 21 page
- A1.24a Reflected Ceiling Plan West Level 4 Rev.4No ratings yetA1.24a Reflected Ceiling Plan West Level 4 Rev.41 page
- Mixed Use & Hybrid Buildings: Why They're Better For Our Cities100% (1)Mixed Use & Hybrid Buildings: Why They're Better For Our Cities6 pages
- Reviving Ancient Construction Technqiue of Sesmic Zone V - Mirza SahilNo ratings yetReviving Ancient Construction Technqiue of Sesmic Zone V - Mirza Sahil8 pages
- Its 2008 IRR: Revised Rules and StandardsNo ratings yetIts 2008 IRR: Revised Rules and Standards32 pages
- Perspective: Site Development Plan Vicinity MapNo ratings yetPerspective: Site Development Plan Vicinity Map5 pages
- The World'S Leading Foodservice & Hospitality Event in Asia: Secure Your Space Now!No ratings yetThe World'S Leading Foodservice & Hospitality Event in Asia: Secure Your Space Now!6 pages
- Bakhrabad Siddhirganj Pipeline Project Inspection / Test Requirements - CivilNo ratings yetBakhrabad Siddhirganj Pipeline Project Inspection / Test Requirements - Civil5 pages
- Week 4 Foundation Walls, Basement Construction, CisternsNo ratings yetWeek 4 Foundation Walls, Basement Construction, Cisterns5 pages
- Pad Footing Formwork and Concrete Costing TablesNo ratings yetPad Footing Formwork and Concrete Costing Tables3 pages
- Parts Manual: Cornelius - Viper 4 FlavorNo ratings yetParts Manual: Cornelius - Viper 4 Flavor16 pages
- Frozen Carbonated Beverage Freezer: Four Flavor FeaturesNo ratings yetFrozen Carbonated Beverage Freezer: Four Flavor Features2 pages
- Services in High Rise Buildings: Arjun Middha 4ANo ratings yetServices in High Rise Buildings: Arjun Middha 4A8 pages
- General Details General Details: Column 2 Column 1No ratings yetGeneral Details General Details: Column 2 Column 18 pages
- Post Show: Endorsed by Supported by Held in OrganiserNo ratings yetPost Show: Endorsed by Supported by Held in Organiser12 pages
- Table 7d1.-U.S. Standard Reinforcing BarsNo ratings yetTable 7d1.-U.S. Standard Reinforcing Bars17 pages
- Inventory Amounts of Reinforced Concrete (Footing) : F1 F2 F3 F4 F5 Core Rw1No ratings yetInventory Amounts of Reinforced Concrete (Footing) : F1 F2 F3 F4 F5 Core Rw110 pages
- Refrigeration Modeling of A Frozen Carbonated Beverage DispenserNo ratings yetRefrigeration Modeling of A Frozen Carbonated Beverage Dispenser13 pages
- Refrigeration Modeling of A Frozen Carbonated Beverage DispenserNo ratings yetRefrigeration Modeling of A Frozen Carbonated Beverage Dispenser13 pages
- IFD44 LL Series WSW8 Installation Instructions JUL 2021 FinalNo ratings yetIFD44 LL Series WSW8 Installation Instructions JUL 2021 Final1 page
- G18 G20 G22 G24 G26: Date: Administrative Bldg-1 - Category ©-A (44) Projec TnameNo ratings yetG18 G20 G22 G24 G26: Date: Administrative Bldg-1 - Category ©-A (44) Projec Tname2 pages
- FC' 30 Slump 18: Water Weight Is Taken 2% of 195 LitersNo ratings yetFC' 30 Slump 18: Water Weight Is Taken 2% of 195 Liters6 pages
- ALX - 002 - Sheet - X100 - CHILLER PLANT ROOM 1 FOR SYSTEM 1 (STANDBY)No ratings yetALX - 002 - Sheet - X100 - CHILLER PLANT ROOM 1 FOR SYSTEM 1 (STANDBY)1 page
