Scribd
Upload
160 views

Input Parameters Mud Weight: Cuttings Slip Velocity Annular Velocity

The document lists input parameters for calculating cuttings slip velocity and annular velocity including mud weight, 600 and 300 readings, plastic viscosity, yield point, particle diameter and density, hole diameter, drill pipe outer diameter, and circulation rate. It then shows the calculations of cuttings slip velocity as 19.85 ft/min and annular velocity as 93.04 ft/min using these input parameters and formulas in the working sheet without changing any of the formulas.

Uploaded by

Hunter
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
160 views

Input Parameters Mud Weight: Cuttings Slip Velocity Annular Velocity

The document lists input parameters for calculating cuttings slip velocity and annular velocity including mud weight, 600 and 300 readings, plastic viscosity, yield point, particle diameter and density, hole diameter, drill pipe outer diameter, and circulation rate. It then shows the calculations of cuttings slip velocity as 19.85 ft/min and annular velocity as 93.04 ft/min using these input parameters and formulas in the working sheet without changing any of the formulas.

Uploaded by

Hunter
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

INPUT PARAMETERS

Mud Weight (ppg)

600 Reading

300 Reading

Plastic Viscosity

Yield Point

Diameter of Particle (Inch)

Density of Particle (ppg)

Hole Diameter (Inch)

Drill Pipe OD (Inch)

Circulation Rate (gpm)

CUTTINGS SLIP VELOCITY (ft / min)


ANNULAR VELOCITY (ft / min)
RS

9.5

52

37

15

22

0.25

22

12.6

4.5

526

19.848958
93.040214
DO NOT CHANGE ANY FORMULA (WORKING SHEET)

600/300

log (600/300)

511 Power n

k=300/511 power n

2.4v/(Dh-Dp)

(2n+1)/3n

( 2.4v/(Dh-Dp) 2.4v/(Dh-Dp) )n

200K(Dh-Dp)

Mew

(DensP-MW)n
WORKING SHEET)

1.405405

0.147802

0.490701

21.33172

1.734506

93.04021

27.56747

1.345966

5.890091

30.20092

177.8862

19.84896

You might also like