Scribd
Upload
55 views

Improved Fuel Pipe Connection For The Auxiliary Heater: Background

This document provides information about an improved fuel pipe connection for auxiliary heaters in certain Scania bus models. It notes that some earlier models experienced leakage where the fuel pipe connects to the fuel pickup unit. An improved quick-fit coupling union is now being used in production from certain chassis numbers onward. It also provides instructions for retrofitting buses with auxiliary heaters and lists the new parts needed for the updated connection.

Uploaded by

joaojito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

Improved Fuel Pipe Connection For The Auxiliary Heater: Background

This document provides information about an improved fuel pipe connection for auxiliary heaters in certain Scania bus models. It notes that some earlier models experienced leakage where the fuel pipe connects to the fuel pickup unit. An improved quick-fit coupling union is now being used in production from certain chassis numbers onward. It also provides instructions for retrofitting buses with auxiliary heaters and lists the new parts needed for the updated connection.

Uploaded by

joaojito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical

03
TI 03-00 06 21 B
information
en

Improved fuel pipe connection for the auxiliary heater

Applies to CL/CN-buses.

Background
There have been instances of leakage where the
auxiliary heater fuel pipe is connected to the
fuel pick-up unit.

Action
An improved quick-fit coupling union is
introduced in production from the chassis
numbers below:

Scania Katrineholm 1 838 016


Scania Latin America Not affected

Buses which do not have a auxiliary heater as


part of their specification will have the fuel
pick-up unit plugged. This is because the new
quick-fit coupling unit is always open.
When retrofitting an auxiliary heater, the plugs
will be removed and the new quick-fit coupling
units connected to the fuel pick-up unit.

Tightening torque 3+/-1 Nm

Note: Do not remove the ventilation valve A


from the fuel pick-up unit.

ã
Scania CV AB 2000-06 1 (2)
A Ventilation valve
B To auxiliary heater
C From auxiliary heater

Parts
Pos. Description New parts Qty
1 Quick-fit coupling unit 1 447 673 2
2 Plastic pipe, 6x1 mm 813 016 2
3 Bolt 307 257 2
4 Lead-in union 372 024 2
5 Plastic pipe, 8x1 mm 815 151 2
6 Union nut for diameter 8 mm 812 888 2
7 Ferrule, diameter 8 mm 813 221 2
8 Insert sleeve, diameter 8 mm 1 358 979 2
9 Insert sleeve, diameter 6 mm 1 358 978 2
10 Ferrule, diameter 6 mm 813 220 2
11 Union nut for diameter 6 mm 812 887 2

ã
2 (2) Scania CV AB TI 03-00 06 21 B en

You might also like