FACTORY AUTOMATION

Graphic Operation Terminal

GOT SIMPLE Series
 Simple model with pursued usability

10" widescreen GS2110-WTBD 7" widescreen GS2107-WTBD

2
 Sufficient basic specifications
Widescreen displays large amounts of information
Actual With a high-resolution WVGA display, screen display utilizing
size the display area on the side such as alarm message and trend
graph is possible.

Connectivity with various industrial devices

The GOT can be connected to various industrial devices such
as programmable controllers of other companies as well as
Mitsubishi Electric industrial devices, and status monitoring of
the equipment is realized.

Environmentally resistant
With protection structure of the front surface IP65F, the GOT
can be used with various devices in various production sites.

Built-in basic interfaces

Basic interfaces such as Ethernet interface are equipped as
standard. The GOT can be connected with various industrial
devices in various connection types.

SD memory
card
interface

USB device

Ethernet RS-232 RS-422

INDEX
Reduce design, setup, and maintenance cost................ 4

Add value to your installation and machine................... 12

Streamlined screen design............................................. 14

Mitsubishi Electric Industrial Devices

GOT SIMPLE Solutions..................................................... 16

3
 Reduce design, setup, and
maintenance cost

Reduce mass production installation setup costs SD memory card interface

Reduce design, setup, and maintenance cost

Start from SD memory card

Transfer the screen data and all the necessary system data
to make a GOT operate to a SD memory card in advance.
Then the GOT can be used just by inserting the SD memory
card.
Useful for replacement or maintenance of GOT.

Industrial devices data collection SD memory card interface

Logged data can be displayed on the

Point
Logging function GOT as a graph, so status change such
as temperature change can be
GOT manages the data of all connected industrial devices. understood in a single glance.
The data can be collected at any arbitrary timing and can
be used for data analysis and feedback.

Factory Office
Historical trend graph display
Programmable
controller

Data
collection
GOT SIMPLE SD memory
Temperature card
controller

Historical data list display

Recommended

Backup important programs SD memory card interface

SD memory
Backup/Restoration function card
Restore
Sequence programs can be replaced even without a
personal computer. When the programs and parameters Backup
are backed up to GOT*1, the data and machine operation Programmable
controller*2 GOT SIMPLE
can instantly be restored even if an unexpected failure
occurs.
NEW
Backup/restoration of MELSEC iQ-F series
*1 A separate SD memory card is required. are supported.
*2 The target connection devices are QCPU, LCPU, FX5UCPU and FXCPU.

4
Useful
Setup and modification on-site USB device RS-232/RS-422

Ethernet

Reduce design, setup, and maintenance cost

FA transparent function
Set up and modify devices without
changing cable connections.

The GOT acts as a transparent gateway to

enable programming, start up, and adjustment
of Mitsubishi Electric industrial devices.
GOT SIMPLE

FA transparent function
The personal computer
Mitsubishi Electric connects with Mitsubishi
industrial devices Electric industrial devices
via the GOT.

Remote maintenance Ethernet

Ethernet connection
Office personal computer can connect to
GOT on the factory floor for maintenance
via Ethernet.
With Ethernet, it is possible to connect a
system of mixed vendors and models,
expanding the possibilities at the factory
floor.

[Connection example]
NEW
GOT SIMPLE
Ethernet printers are supported. The Ethernet
data such as hard copy can be
printed by an Ethernet printer on the
network.
Ethernet Programmable Programmable Personal
printer controller controller computer

5
 Use GOT SIMPLE to control industrial RS-232/RS-422 Ethernet
devices
Factory

Multi-channel function Programmable Programmable

GOT SIMPLE
controller controller
Up to 2 channels of industrial device can be
controlled with one GOT. The data can be easily
transferred between devices with just simple
settings in GT Works3.
Serial communication Ethernet
Reduce design, setup, and maintenance cost

Easily collect data from connected devices Collect data (device data transfer)

GOT SIMPLE
Device data transfer function
Using GT Works3, simply set source devices,
destination devices, and triggers and you can
transfer data between industrial devices. Data on Transfer Transfer
destination source
the connected devices can be collected in the
programmable controller without a sequence Sequence Device data
program transfer setting
program. not required

MODBUS® communication also supported RS-232/RS-422

MODBUS® communication
Up to
As a master station, GOT can communicate with a
MODBUS®/RTU slave device. 10 devices (RS-422
Drive
command 10 devices
(RS-422)
2 pair) can be connected for monitoring of Monitoring
production line, etc.
GOT SIMPLE MODBUS® device

Simple, easy-to-understand setup

Recipe function & recipe display (record list)

GOT saves the recipe information (device values) such as material blend and machine conditions. You can
change the recipe on the GOT and write it to a programmable controller to quickly perform the changeover.
Changing recipes (changeover) is easy on a user-created screen or on the utility screen. The users can easily
create screens by using the recipe display (record list).

GOT SIMPLE

Product A recipe Product B recipe

D1000 .......... 200 D1000 .......... 400

D1001 .............. 1 D1001 .............. 0

D1002 ............ 50 D1002 .......... 300

Write Read
D1003 .......... 180 D1003 ............ 50
-----

-----

-----

-----

Easily change recipes from Programmable

Product A to Product B on the GOT. controller

List of records created with recipe display

6
Recommended

Program change without a personal computer on-site

MELSEC FX list editor

With the GOT, sequence programs of FX Series
programmable controllers can be edited in the list format.
Convenient for minor on-site program changes.

Reduce design, setup, and maintenance cost

Display industrial devices alarms
SSCNET III/H compatible GOT SIMPLE
Simple Motion module

Alarm function
Use the GOT to display and check alarms set by the
users. Alarms of the connected device can be
monitored and the equipment status can be checked.
When a problem occurs, you can quickly troubleshoot
the problem. MR-JE-B

Increase efficiency of maintenance work

Read recipe file
Sweet bean
paste Curry
Reading/writing resource data D2000 D2001

Record 1 Sweet bean 50 0

The GOT resource data can be read out to the Record 2
bun
Curry bun 0 30

personal computer, corrected, and then written

back*1. The efficiency of maintenance work is Office
enhanced as there is no need to exchange data with
an SD memory card. GOT SIMPLE

Write edited recipe file

Sweet bean
paste Curry

D2000 D2001

Record 1 Sweet bean 50 0

bun
Record 2 Curry bun 0 40
Edit with personal computer

*1 For the details on resource data that can be read and written, please refer to the GT Designer3 (GOT2000) Screen Design Manual.

Recommended

Monitor device value and set values for timer, etc.

Device monitor function

Monitor and change internal device ON/OFF status,
word values, timer and counter values of connected
devices such as MELSEC programmable controllers.

7
 Recommended

GOT Easy Drive

Control Inverter

Interactive Solutions
Reduce design, setup, and maintenance cost

Challenges that cannot be resolved just with the inverter can now be resolved with GOT2000 and inverter
interactive functions.
The GOT Drive enhanced functionality is designed to eliminate need for additional hardware, software and suits
customer’s applications to realize central monitoring, speed up system startup, improve predictive maintenance
and troubleshooting.

[System configurations] Select the required connection type to match your system configuration. Multiple
inverters can be monitored with one GOT by switching the target station number.

CASE1 Direct connection with Ethernet CASE2 CC-Link IE Field Network connection via
programmable controller

Ethernet
Ethernet

Programmable RCPU/QCPU/LCPU
GOT SIMPLE
controller + CC-Link IE Field Network
Master/local stations
HUB
HUB
Ethernet

FR-A800-E FR-A800-GF*
FR-F800-E FR-A800*+FR-A8NCE
FR-E700-NE* FR-F800*+FR-A8NCE
GOT SIMPLE

* T
 he models with SERIAL “88*****” or later on the rating plate * T
 he models with SERIAL “83*****” or later on the rating plate are
are supported. supported.

CASE3 E
 thernet connection via programmable CASE4 Direct connection with RS-485
controller

Ethernet RS-485*

GOT SIMPLE RCPU/QCPU/LCPU

GOT SIMPLE
+ Ethernet interface module

HUB Ethernet RS-485

FR-A800
FR-A800-E FR-F800
FR-F800-E FR-E700
FR-E700-NE* FR-D700

* T
 he models with SERIAL “88*****” or later (for FR-E700-SC-NNE
and FR-E700-SC-ENE, “89******” or later) on the rating plate are * The connection interface of the GOT is RS-422.
supported.

8
With GOT, the inverter's parameters can be adjusted with the control panel closed!

Parameter settings (simple mode) Parameter Setting screen*1

Use the GOT on the front of the control panel to

adjust the inverter’s simple mode parameters. The
parameter names can be confirmed on a list, so the
required parameters can be easily found and set.

Reduce design, setup, and maintenance cost

Back up (save) or restore (write)
parameters as a recipe file when
necessary.

With GOT, the inverter's parameters can be monitored in a batch with the control
panel closed!

Batch monitor Batch Monitor screen*1

The inverter’s current values such as the output

frequency, output current, and output voltage can
be monitored with the GOT without preparing the
personal computer or directly confirming the
inverter.

With GOT, the replacement timing of the inverter's components can be displayed
and predictive maintenance can be performed!

Inverter life diagnosis Inverter Life Diagnosis screen*1

GOT can be used to monitor the operation status of

the inverter’s components (main circuit capacitor,
control circuit capacitor, cooling fan, etc.) and
confirm the replacement timing. Perform predictive
maintenance by replacing parts before the inverter
fails.

*1 Parameters and devices to be monitored can be set and displayed on a screen. The above is an example for screen design.

9
 Recommended

GOT Easy Drive

Control Servo

Interactive Solutions
Reduce design, setup, and maintenance cost

The GOT Drive easily visualizes the servo system status to realize speed up of the system startup and improve
predictive maintenance and troubleshooting.

[System configurations] Select the required connection type to match your system configuration. Multiple
servo amplifiers can be monitored with one GOT by switching the target station
number and axis number.

CASE1 Ethernet/Serial direct connection CASE2 Simple Motion module connection

GOT SIMPLE GOT SIMPLE

Serial,
Ethernet
Serial or Ethernet Servo amplifier
(depending on the MR-J4-A(-RJ) [Serial] Simple Motion module
servo amplifier) MR-JE-A [Serial] (RD77MS/QD77MS/LD77MS/FX5-80SSC-S/
MR-JE-C [Ethernet] FX5-40SSC-S)
Programmable
controller Servo amplifier
MELSEC iQ-R
MR-J4-B(-RJ) MR-J4W2-B MR-J4W3-B MR-JE-B
MELSEC iQ-F Station 1 Station 2
MELSEC-Q
MELSEC-L
MELSEC-F Pulse Axis 1 Axis 2
+ train
Positioning
module

CASE3 Motion controller connection CASE4 CC-Link IE Field Network connection

GOT SIMPLE GOT SIMPLE

Serial, Ethernet
Ethernet
CC-Link IE Field Network Simple Motion module
Motion controller Master/local station compatible modules
(R64MTCPU/R32MTCPU/R16MTCPU/Q17nDSCPU/ (RD77GF/QD77GF/RnENCPU/RJ71EN71/RJ71GF11-T2/
Q170MSCPU(-S1)) QJ71GF11-T2/LJ71GF11-T2)

Servo amplifier
MR-J4-B(-RJ) MR-J4W2-B MRJ4W3-B
Servo amplifier
MR-J4-GF(-RJ)

Axis 1 Axis 2 Station 1 Station 2

10
Adjust servos without a personal computer!
One-touch tuning function Tuning function
Just a single touch on the switch on the GOT screen After one-touch tuning, to obtain higher
to perform adjustment work, which is difficult performance, you can perform fine tuning of gain
without experience. You can adjust servo amplifier parameters, machine resonance suppression filter,
automatically by selecting from three response and vibration suppression control parameters in the
modes. tuning screen.
One-touch tuning screen*1 Tuning screen*1

Reduce design, setup, and maintenance cost

Perform fine tuning of gain
Adjustment results Just a single touch on parameters, tuning response, and
are shown the switch overshoot amount.

Predict machine deterioration and improve system predictive maintenance

without a personal computer!
Machine diagnosis function
GOT can display estimated values (machine friction, torque vibration, etc.) that are collected by the machine
diagnosis function of the servo amplifier. The difference between the initial value (at the startup) and the current
value can be used to predict deterioration of the machine. Using this function with the GOT’s alarm function will
help you perform timely maintenance of machine parts.
Machine diagnosis screen*1
Displays the estimated value upon
completion of the machine
diagnosis. When any of the
estimation values exceed the
threshold values that are set on
the GOT, the numerical value
display area turns red.

Save estimation values to file and

compare the values to check the
deterioration of the machine.

Supports predictive maintenance functions of servo amplifiers!

Servo amplifier life diagnosis function Servo amplifier life diagnosis screen*1

Check cumulative operation

time, on/off counts of
inrush relay on GOT. In
addition, replacement
Check the
timing of servo amplifier smoothing
components (capacitor, capacitor
energization
relay) can be displayed on time or the
the GOT. Periodic check inrush relay on/
off times at a
glance.

*1 Sample screens are available for connection with MR-JE-A and MR-JE-B for the GOT SIMPLE series.

11
 Add value to your
installation and machine

Security with password management

Operation
Operation
Add value to your installation and machine

screen is
Operator authentication function authorized Login displayed
Setting the operation authority and the OK

×
viewing authority per operator achieves
“enhanced security” and “prevention of Operation
Operation
screen is
improper operation”. Operator authentication unauthorized
Login not displayed
can be performed at startup and when the failed
screen is switched.

Reduce risk of unauthorized access through network Ethernet

IP filter function Register the IP address of the Register the IP address of the
Registering the IP address of device to allow access device to prohibit access
the device which can access
the GOT restricts the access
from unauthorized devices. GOT SIMPLE GOT SIMPLE

Ethernet Ethernet

Access not Access not

accepted accepted

Allowed Unregistered Prohibited Unregistered

IP address IP address IP address IP address

Easily exchange data with FTP Ethernet

File transfer function

By using GOT, production results and alarm logs can be stored in an SD memory card of the GOT (FTP client) and
sent to a personal computer (FTP server). The GOT can also receive the production instruction data from the
personal computer.
By using the GOT as an FTP server, files can be read to and written from the personal computer that acts as an
FTP client. (FTP server function)

Writing file from GOT to personal computer Reading file from personal computer to GOT

Write to FTP server Retrieve file from FTP server

Personal computer Personal computer

(FTP server) (FTP server)
Production Production Production Production Production Production
results, results, results, instruction data instruction data instruction data
alarm log alarm log alarm log

GOT SIMPLE (FTP client) GOT SIMPLE (FTP client)

12
Setting multiple functions with one switch

Add value to your installation and machine

Multi-action switch function
Change screen
Multiple functions can be set to one switch, so
Switch ON/OFF
there is no need for multiple switches for Multi-
Set data action
separate functions. By setting execution function
sequence and conditions, delay, repeat, Interlock
interlock settings can be combined, reducing Option and
Security execution condition
the burden of programmable controller
programming.

Language change according to country of the operator

Language switching
Screen can be easily made for switching
between Japanese, Chinese, English, etc. 30
languages can be set for each comment.
Screens, not only languages, can be switched
based on purpose.

Japanese Chinese English

Switch Switch

Easily installed on compact equipment

Vertical display
By using a GOT vertically, it can be easily
installed on compact equipment and can
neatly display vertical letters.
Less scrolling is needed when displaying lists.

Saving energy when operator is not present

Screen saver function

Screen save time can be set from 1 to 60 minutes. By setting the backlight ON/OFF, energy can be saved when no
operator is present. Programmable controller can also control the ON/OFF status, so the backlight will turn ON
and alarm screen will display when an alarm occurs.

13
 Streamlined screen
design

Pick and place intuitive screen design is easy even for beginners

Using parts is simple. Just select a part and place on the screen! Design your screen with intuitive pick and place
operation.
Streamlined screen design

Click the part you

1 want to use

Reduce design time by registering

frequently used parts to 'My Favorites' or
'My Library'.
Import/export is also possible.

Click anywhere to
2 place the part

Utilize the past assets and sample screens

Individual screens can be utilized from past projects and sample projects. Select the screens to utilize, then drag
and drop to launch the utilization wizard. Just follow the simple steps and you can utilize the project data.

Easy searches
from category
lists

Utilization wizard

Drag
&
Drop

Simple step navigation.

Settings related to target screen (comment group,
logging, scripts, etc.) can also be utilized.

14
Easily create stylish meters with a graphical meter

Just select a meter from the preset list and you can create stylish, clear meters. The position and angle of scales
can be adjusted by mouse operation and the shape and design can be changed easily. Warning color display

Streamlined screen design

indicates the machine status clearly.

Select from the toolbar Select from the preset list Easy to adjust settings by mouse operation
Adjust scale
position

Adjust warning
color display position

Adjust start/end
angle of the meter

Select meter
shape

The list includes various choices

More beautiful graphics

With GOT Graphic Ver.2, you Gradation background and transparency setting of the
Screen design list window screen
can select the required
screen design and change it
in a batch. Gradation
drawing and transparency
setting can be performed.

[Note] When the software is earlier than GT Works3 Version1.215Z, installation of the following is required before use of
the GOT SIMPLE series.
 GS installer installation procedure
1. Double click the GS Installer (GS Installer.exe) in the folder of GT Works3 Ver.1.105K or
later. Operate the personal computer in accordance with instructions given on the screen.
2. When the completion screen appears, click the [Finish] button to finish installing the
GS Installer.
 Storage place
DVD-ROM: <Root>\Disk1\TOOL\GS\GS Installer.exe
* W hen the software is GT Works3 Version1.215Z or later, the above procedures are not required.
* When you use the functions introduced in this catalog, install GT Works3 Version1.215Z or later.
* For more details, please refer to the GS21 General Description manual.

15
 Mitsubishi Electric Industrial Devices
GOT SIMPLE Solutions

Using Mitsubishi Electric industrial devices together provides ideal,

simple solutions that enhance efficiency and reduce production costs.
Mitsubishi Electric Industrial Devices
GOT SIMPLE Solutions

02 Production

01 Material handling

Recommended
Recommended Recommended
Recommended
for
for simple
simple control!
control! for
for simple
simple positioning
positioning control!
control!

+ +
FR-D700 MR-JE-A
GOT SIMPLE GOT SIMPLE

16
Recommended
Recommended
for
for smooth
smooth drive
drive control!
control!

Mitsubishi Electric Industrial Devices

FX5 CPU module +

GOT SIMPLE Solutions

Simple Motion
+ module

GOT SIMPLE

MR-JE-B
03 Packaging

Recommended
Recommended Recommended
Recommended
for
for easy
easy automation!
automation! for
for building
building networks!
networks!

FX5 CPU FX5 CPU

+ +
module module

GOT SIMPLE GOT SIMPLE

FR-D700 MR-JE-C

17
 Material
01 handling
Easy and simple control with inverters

GOT SIMPLE FR-D700 Point

Issue operation commands
to inverter from the GOT.
Mitsubishi Electric Industrial Devices

RS-485
communication*
3-phase
GOT SIMPLE Solutions

motor

Point

Monitor conveyor lines and

display alarms on the GOT.

Recommended functions for each application  FR-D700

General-purpose magnetic flux vector S-pattern acceleration/deceleration

control An S-pattern is maintained from the present frequency
General-purpose magnetic flux vector control and auto to the target frequency; therefore it is possible to
tuning functions are available. These functions ensure reduce shock during acceleration/deceleration and
the applications that require high starting torque, such prevent load shifts.
as washing machines, agitators, and transfer machines
including conveyors, hoists, and elevators. Output frequency
(Hz)
High torque of 150%/1 Hz is realized (when the slip
compensation function is valid).
Auto tuning
With our “non-rotation” auto tuning function the motor
constant (R1) can be automatically calculated.

Time
Communication operation
(RS-485 communication)*1
Conveyor belts can be controlled individually by using
multiple inverters. Automatic operation is possible by
collectively managing multiple inverters.

*1 The connection interface of the GOT is RS-422.

18
 Recommended for
simple control!

GOT SIMPLE Point

A single GOT
manages multiple
inverters that control
individual conveyors. GOT SIMPLE

Mitsubishi Electric Industrial Devices

RS-485

GOT SIMPLE Solutions

communication*
FR-D700

Inverter
FR-D700
* The connection interface of the GOT is RS-422.

Application examples 
FR-D700 is
an ideal choice
Spinning Fan and pump

Recommended function: Traverse function Recommended function: PID function

The traverse function, used for the traverse axis Flow rate and air volume is controlled by an inverter. It
of spinning machine, prevents uneven winding or is possible to regulate flow rate and air volume so that
collapsing. they stay at a pre-set level.

19
 02 Production 1 Simple positioning control with

Molding MR-JE-A

RS-485 communication*
Mitsubishi Electric Industrial Devices
GOT SIMPLE Solutions

Recommended functions for each application  MR-JE-A

Simple cam function

Smooth conveyance and stopping are realized by cam control based on cam
data. Cam operations include linear motion, reciprocating motion, and feeding MR Configurator2
motions, which can be selected according to your application. Various patterns of cam data
can be created easily.

Reciprocating motion Linear motion Feeding motion

Reciprocating cam Ball screw Rotary table Belt conveyer Rotary table

t t

Reciprocating cam Cam motion which

Linear cam motion by
motion within a cam resets a cam reference MR Configurator2
one cycle
stroke range position per cycle Simple cam setting window

20
GOT and servo
Recommended for
simple positioning
control!
GOT SIMPLE

GOT SIMPLE

Mitsubishi Electric Industrial Devices

Point
Positioning function is built-in

GOT SIMPLE Solutions

MR-JE-A. Directly connect to the
GOT, and perform positioning and
adjustments.

FX5 CPU module

FX5 CPU module has built-in high-speed
I/O, and up to four MR-JE-A AC servos can
be connected!

Pulse train control

AC Servo MELSERVO-JE
MR-JE-A
* The connection interface of the GOT is RS-422.

Application examples 
Rotary knife MR-JE-A is
an ideal choice
Recommended function: Current position latch MR-JE-A
function and interrupt positioning function
A/B-phase pulse
The actual position of the servo motor can be obtained
based on the inputs from the sensor that detects the (2) Calculates a
(1) Turns on the compensation
registration marks printed on the high-speed moving film. cam position amount in the
compensation
The servo amplifier calculates compensation amounts servo amplifier
request by
and corrects position errors of detection of
the rotary knife axis based on Synchronous mark sensor
Servo motor
those inputs from the sensor encoder
(3) Compensate rotary knife axis
so that the film can be cut at
Conveyor axis Mark sensor
the set position. Rotary knife axis

Cutting length set

Inverter
(Drives conveyor axis by speed control)

21
 02 Production 2 Smooth drive control with Simple

Filling machine
Mitsubishi Electric Industrial Devices
GOT SIMPLE Solutions

Point

Use cam control to adjust speed for

raising nozzle according to height of
the work piece being filled.

Recommended functions for each application 

FX5 CPU module Simple Motion module MR-JE-B

Position, speed, torque control Synchronous control without program

Smoothly change to torque control mode from position/ Just set parameters using software to easily realize
speed control mode without a stop or a sudden synchronous control instead of controlling mechanically
change in speed and torque, and thus reduce load with physical gears, shafts, speed change gears or
to a machine. This function is ideal for applications cams.
where control switches from position to torque such as
tightening and press-fit control or insertion of a work
piece, and cap or screw tightening.

Deterministic and synchronized

communication
Complete deterministic and synchronized
communication is achieved with SSCNET III/H, offering
technical advantages in machines such as printing and
food processing machines that require synchronous
accuracy.

22
Motion and servo Recommended
for smooth drive
control!

FX5 CPU module +

Simple Motion module GOT SIMPLE

GOT SIMPLE
Ethernet

Mitsubishi Electric Industrial Devices

GOT SIMPLE Solutions
MR-JE-B

Point
Programmable Controller AC Servo MELSERVO-JE
Compatible with fiber optic network
MELSEC iQ-F Series MR-JE-B
“SSCNET III/H”, which accelerates FX5 CPU module +
system responsiveness. Simple Motion
module

Application examples  FX5 CPU module Simple Motion module

MR-JE-B is
Unwinders and rewinders Simplified machine tools an ideal choice

SSCNET III/H allows configuration of a multi-axis In positioning operation of XY table, the workpiece
synchronous control system even for unwinders and can be processed with high quality by using machine
rewinders with multiple axes. For machines with a resonance suppression filter that suppresses machine
machining axis, further high-level synchronous control vibration and lost motion compensation function that
system is possible by using cam control and advanced suppresses quadrant protrusion.
synchronous control.

23
 02 Production 3 Connectivity with Mitsubishi Electric

Oven Point FX5 CPU module

Receive signals from temperature
sensor or the GOT and issue
commands to inverter.
Mitsubishi Electric Industrial Devices

Temperature sensor
GOT SIMPLE Solutions

RS-485 communication

FR-D700

Point
Receive signals from
programmable controller
and adjust oven fan.
Fan Fan

Recommended functions for each application 

Optimum excitation control FR-D700 Inverter communication FX5 CPU

This control enables the motor to perform with commands
optimum efficiency. More energy saving is possible in Dedicated instructions for Mitsubishi Electric inverter
applications with variable load torque characteristic protocol and communication control are built in FX5
such as fan and pump. CPU module. Connecting an inverter enables simple
control of inverter.
100 Optimum
excitation control
Motor efficiency (%)

80
More energy RS-485 Max. 16 units
60 saving

40
V/F control
20
FR-D700

0 20 40 60 80 100
Motor load torque (%) Max. 50 m*1
[Comparison of Mitsubishi Electric products]

*1 F
 or built-in RS-485 port. 1200 m when configured with
FX5-485ADP.

24
industrial devices for easy automation
Recommended for
easy automation!

GOT SIMPLE

GOT SIMPLE

Mitsubishi Electric Industrial Devices

Ethernet

GOT SIMPLE Solutions

Point
Use recipe function to set
baking time according to
workpiece type.

FR-D700

Point
Control conveyor speed Programmable Controller Inverter
according to baking time.
MELSEC iQ-F Series FR-D700
FX5 CPU module

Application examples 
Fountain Mixing

FX5U CPU
FR-D700 is an module is an
ideal choice ideal choice

Recommended functions: General-purpose magnetic Recommended function: Analog I/O (with alarm
flux vector control, brake transistor built-in output) control
connection The FX5U CPU module is equipped with analog input
A variety of fountain displays are possible by and analog output. No program is required; just set the
connecting a brake resistor which allows high starting parameters to start using it.
torque and improved braking efficiency during
deceleration under general-purpose magnetic flux
vector control.

25
 03 Packaging Easily build a network with

Point
Switching hub
Simple and flexible network wiring
Mitsubishi Electric Industrial Devices
GOT SIMPLE Solutions

Point
FX5 CPU module
Control with just
the CPU module.

Recommended functions for each application  MR-JE-C

Point table method

Perform positioning operation with the point table method or the indexer method. With the point table method, just set the
point table No. and turn on the start signal, and then the positioning operation will start. A continuous operation of the next
point table is also possible without stopping. In the indexer method, the travel amount is automatically calculated based on
the number of stations set in the parameter.

<MR-JE Series servo amplifier lineup*1> : Compatible —: Not compatible

Command interface
Model CC-Link IE Field
SSCNET III/H MODBUS®/TCP MODBUS®/RTU Pulse train Analog voltage
Basic
MR-JE-C —     
MR-JE-B  — — — — —
MR-JE-A — — —   
*1 F
 unctions compatible with the latest servo amplifier version are listed (as of July 2019). For the details on function compatibility according to the
version, please refer to the relevant product manual.

26
Mitsubishi Electric AC Servo
Recommended for
building networks!

Point
GOT SIMPLE

Adjust and monitor

with the GOT.
GOT SIMPLE

Mitsubishi Electric Industrial Devices

GOT SIMPLE Solutions
MR-JE-C

Programmable Controller AC Servo

MELSEC iQ-F Series MELSERVO-JE
FX5 CPU module MR-JE-C

Application examples
MR-JE-C is
Packaging Machining center an ideal choice

Simple synchronous operations including horizontal, Recommended function: Indexer method

vertical, and rotational movements are possible with Positioning operation is performed by specifying equally
a start signal to all axes via cyclic transmission. This divided stations (up to 255 stations). The travel distance
function can be used to easily build a multi-axis system is calculated automatically based on the number of
for packaging, etc. stations and the number of gear teeth on the motor and
machine sides set in parameters.

27
 HMI lineup
GOT2000 Series

Advanced model with multi-touch gesture functions

GT27 Ethernet RS-232 RS-422/485 CC-Link IE Control CC-Link IE Field*1

*1 The CC-Link IE Field Network communication unit and GOT set is also available.
CC-Link IE Field Basic CC-Link Bus MELSECNET Multi-touch gesture

15 inch 12.1 inch 10.4 inch

TFT AC TFT AC TFT AC
65536 65536 65536
colors DC colors DC colors DC

XGA GT2715-XTBA SVGA GT2712-STBA SVGA GT2710-STBA

1024×768 GT2715-XTBD 800×600 GT2712-STBD 800×600 GT2710-STBD
GT2712-STWA [White model]
GT2712-STWD [White model] VGA GT2710-VTBA
640×480 GT2710-VTBD
Specifications

GT2710-VTWA [White model]

GT2710-VTWD [White model]

High performance, cost efficient, mid-range model

GT25 Ethernet RS-232 RS-422/485 CC-Link IE Control*2 CC-Link IE Field*1*2 CC-Link IE Field Basic

*1 The CC-Link IE Field Network communication unit and GOT set is also available. *2 Not supported by GT2505.
CC-Link*2 Bus*2 MELSECNET*2

12.1 inch 10.4 inch 8.4 inch

TFT AC TFT AC TFT AC
65536 65536 65536
colors DC colors DC colors DC

SVGA GT2512-STBA VGA GT2510-VTBA VGA GT2508-VTBA

800×600 GT2512-STBD 640×480 GT2510-VTBD 640×480 GT2508-VTBD
GT2510-VTWA [White model] GT2508-VTWA [White model]
GT2510-VTWD [White model] GT2508-VTWD [White model]

Ethernet (2 ports) RS-232

GT25 GOT2000 widescreen expands your view

GT25 RS-422/485 CC-Link IE Field Basic

Wide Ethernet (2 ports) RS-232 RS-422/485 CC-Link IE Field Basic Sound output (built-in)
Rugged Sound output (built-in)

10.1 inch 7 inch 7 inch

TFT TFT TFT
65536 65536 65536
colors DC colors DC colors DC

WXGA GT2510-WXTBD WVGA GT2507-WTBD WVGA GT2507T-WTSD

1280×800 GT2510-WXTSD 800×480 GT2507-WTSD 800×480

Suitable for a wide range Compact models with basic functions

of applications Ethernet*1 RS-232*1 RS-422/485*1 CC-Link IE Field Basic*2

GT21
Wide
Ethernet

RS-422/485
RS-232

CC-Link IE Field Basic

GT21 *1 S upported interfaces vary depending on the model. Please refer to
descriptions in [ ] after the model.
*2 Supported only by the models equipped with an Ethernet port.

7 inch 4.3 inch 3.8 inch

TFT TFT TFT
65536 65536 mono-
colors DC colors DC chrome DC

5-color LED

WVGA GT2107-WTBD GT2104-RTBD GT2103-PMBD [Ethernet, RS-422/485]

480×272 320×128
800×480 GT2107-WTSD [Ethernet, RS-232, GT2103-PMBDS [RS-232, RS-422/485]
RS-422/485]
GT2103-PMBDS2 [RS-232×2 ch]
GT2103-PMBLS [RS-422] 5 V DC type

28
For the status of conforming to various standards and laws, please refer to the Mitsubishi Electric Factory Automation Global website
(www.MitsubishiElectric.com/fa/).

MELIPC Series

Panel computer with Windows® OS

MI3000
Ethernet (3 ports) RS-232
Multimedia*2 Video/RGB*2 Sound output External I/O
RS-422/485 DisplayPort
*2 Not supported by GT2705.
Sound output (built-in)

8.4 inch 5.7 inch 21.5 inch/

TFT
65536
AC TFT
65536
AC
15 inch
colors DC colors DC
TFT
65536
colors DC

SVGA GT2708-STBA VGA GT2705-VTBD

800×600 GT2708-STBD 640×480 MI3321G-W MI3315G-W
Full HD XGA
1920×1080 1024×768
VGA GT2708-VTBA
640×480 GT2708-VTBD

Specifications
HMI functionality in the palm of your hand
Sound output*2 External I/O*2
GT25 Ethernet RS-232 RS-422/485*1 CC-Link IE Field Basic CC-Link
Handy
*1 GT2505HS supports RS-422 only.

5.7 inch 6.5 inch 5.7 inch

TFT TFT TFT
65536 65536 65536
colors DC colors DC colors DC

VGA GT2505-VTBD VGA GT2506HS-VTBD VGA GT2505HS-VTBD

640×480 640×480 640×480

A new style of GOT2000

GT25 Ethernet RS-232 RS-422/485 CC-Link IE Control CC-Link IE Field CC-Link IE Field Basic CC-Link Bus MELSECNET

Open frame Sound output External I/O

12.1 inch 10.4 inch 8.4 inch

TFT AC TFT AC TFT AC
65536 65536 65536
colors DC colors DC colors DC

SVGA GT2512F-STNA VGA GT2510F-VTNA VGA GT2508F-VTNA

800×600 GT2512F-STND 640×480 GT2510F-VTND 640×480 GT2508F-VTND

GOT SIMPLE Series

SoftGOT GS21
Simple model having excellent cost performance
Ethernet RS-232 RS-422 CC-Link IE Field Basic

GOT2000
compatible
software USB port

65536 colors
license key 10 inch 7 inch
TFT TFT
65536 65536
colors DC colors DC

GT SoftGOT2000 is an HMI software that allows GOT2000

functions to operate on a personal computer or panel WVGA GS2110-WTBD WVGA GS2107-WTBD
computer. Various industrial devices can be connected 800×480 800×480
and monitored. Resolution: 640 to 1920 × 480 to 1200
* A separate license key must be mounted during use.

29
 Function list
For the details of functions, supported controllers, and connection types, please refer to the relevant manual or Help of the GOT2000 Series.
: Supported —: Not supported
Category Function name Necessary devices*1 GT27 GT25 GT25 Wide GT25 Rugged
15"  — — —
12.1"   — —
10.4"   — —
Screen size

10.1" Wide/10" Wide — —  —

8.4"   — —
7" Wide — —  
6.5" — — — —
5.7"   — —
4.3" — — — —
3.8" — — — —
WXGA 1280×800 — —  —
Resolution

XGA 1024×768  — — —
SVGA 800×600   — —
WVGA 800×480 — —  
Hardware specifications

VGA 640×480   — —
Other — — — —
65536 colors    
Color

Monochrome (black/white)
— — — —
32 shade grayscale
Touch panel simultaneous press (2 points)  — — —
Human sensor *10 — — —
Other than below:
Memory for storage (ROM) 57 MB 32 MB 32 MB 32 MB
Memory
Specifications

GT2705: 32 MB
Other than below:
Memory for operation (RAM) 128 MB 80 MB 128 MB 128 MB
GT2705: 80 MB
RS-232    
RS-422/485    
 
 
Ethernet (Ethernet communication unit) 2 ports by installing 2 ports by installing
Interface

2 ports as standard 2 ports as standard

communication unit communication unit*17
USB host    
USB device    
SD memory card interface    
Extension interface, Side interface,
Wireless LAN communication unit Communication units, option units *11 *11*17 *11 *11
interface
Figure    
Logo text    
Touch switch    
Lamp    
Numerical display, Numerical input    
Text display, Text input    
Date display, Time display (Battery)    
Comment display    
Parts display (SD memory card or USB memory)    
Parts movement (SD memory card or USB memory)    
Figure/object functions

Historical data list display (SD memory card or USB memory)    

Simple alarm display    
System alarm display    
Alarm display (user) (SD memory card or USB memory, battery)    
Alarm display (system) (SD memory card or USB memory, battery)    
Recipe display (record list)    
Line graph    
Trend graph    
Screen design

Bar graph    
Statistic bar graph    
Statistic pie graph    
Scatter graph    
Historical trend graph (SD memory card or USB memory)    
Graphical meter    
Level    
Panelmeter    
Slider    
Document display SD memory card    
Script parts    
Logging (SD memory card or USB memory, battery)
Functions performed on background of GOT

   
Recipe (SD memory card or USB memory, battery)    
Device data transfer    
Trigger action    
Time action (SD memory card or USB memory)    
File output (SD memory card or USB memory)    
Serial printer output    
Hard copy
Ethernet printer output    
PictBridge printer output Printer unit  *17 — —
Project script, Screen script    
Object script    
*1 Necessary units when using GT27, GT25, GT25 wide, GT25 rugged, GT25 handy, *6 Excluding GT2103-PMBLS.
GT21, GT21 wide, or GS21 models are shown. Parenthesized devices are *7 GT2104-RTBD only.
required depending on conditions of use.
*8 Excluding GT2705-VTBD.
*2 Data is output to the printer that is recognized by the personal computer.
*9 To use multiple units such as extension units, barcode readers, or RFID
*3 CSV files are saved in the virtual drive of the personal computer so that it is controllers with a GT2705-VTBD, the total current consumption of the units
recommended to output the files to printers. should be less than the value that the GT2705-VTBD can provide. For the
*4 Only the GOTs with SVGA or higher resolution are supported. details, please refer to the relevant manual of the GOT2000 Series.
*5 Remote personal computer operation function (Ethernet) cannot be used. The *10 GT2715-XTBA, GT2715-XTBD, GT2712-STBA, GT2712-STBD, GT2712-STWA,
following screens are displayed horizontally: utility screen, monitor and data GT2712-STWD only.
management screens that are displayed from the utility screen (sequence
program monitor, etc.), video camera images in the multimedia and video
display functions. For the details of other GOT operations when placed
vertically, please refer to the relevant product manual or Help.

30
 For the details of functions, supported controllers, and connection types, please refer to the relevant manual or Help of the GOT2000 Series.
: Supported —: Not supported
Category Function name Necessary devices*1 GT25 Handy GT21 GT21 Wide GS21 GT SoftGOT2000
15" — — — —
12.1" — — — —
10.4" — — — —
Screen size

10.1" Wide/10" Wide — — — 

8.4" — — — —
7" Wide — —  
6.5"  — — —
5.7"  — — —
4.3" —  — —
3.8" —  — —
WXGA 1280×800 — — — —
XGA 1024×768 — — — —
Resolution

Flexible
SVGA 800×600 — — — — resolution
640 to 1920
Hardware specifications

WVGA 800×480 — —  
VGA 640×480 ×
 — — —
480 to 1200
GT2104-R: 480×272
Other — — —
GT2103-P: 320×128
65536 colors     
Color

Monochrome (black/white)
—  — — —
32 shade grayscale
Touch panel simultaneous press (2 points) — — — — —
Human sensor — — — — —

Specifications
GT2104-R: 9 MB
Memory

Memory for storage (ROM) 32 MB 15 MB 9 MB 57 MB

GT2103-P: 3 MB
Memory for operation (RAM) 80 MB — — — —
RS-232     *12

GT2505HS 
RS-422/485   *12
supports RS-422 only
RS-422 only
Interface

Ethernet (Ethernet communication unit)     *11

USB host  —  — *13
USB device    
SD memory card interface  *14   *13
Extension interface, Side interface,
Wireless LAN communication unit Communication units, option units — — — — *11
interface
Figure     
Logo text     
Touch switch     
Lamp     
Numerical display, Numerical input     
Text display, Text input     
Date display, Time display (Battery)     
Comment display     
Parts display (SD memory card or USB memory)  *16   
Parts movement (SD memory card or USB memory)  *16   
Historical data list display (SD memory card or USB memory)  *16   
Figure/object functions

Simple alarm display     

System alarm display  — — — 
Alarm display (user) (SD memory card or USB memory, battery)  *16   
Alarm display (system) (SD memory card or USB memory, battery)  — — — 
Recipe display (record list)     
Line graph     
Trend graph     
Screen design

Bar graph     
Statistic bar graph     
Statistic pie graph     
Scatter graph     
Historical trend graph (SD memory card or USB memory)  *16   
Graphical meter     
Level     
Panelmeter     
Slider     
Document display SD memory card  — — — 
Script parts     
Logging (SD memory card or USB memory, battery)
Functions performed on background of GOT

 *6   
Recipe (SD memory card or USB memory, battery)  *16   
Device data transfer     
Trigger action     
Time action (SD memory card or USB memory)     
File output (SD memory card or USB memory)  *6   
Serial printer output — *6   *2
Hard copy
Ethernet printer output  *15   —
PictBridge printer output Printer unit — — — — *2
Project script, Screen script     
Object script  — — — 
*11 For the applicable communication units and option units, please refer to the *15 GT2104-RTBD, GT2103-PMBD only.
relevant product manual. *16 On GT2103-PMBLS, only the functions that do not require SD memory card
*12 Use the standard interface of the personal computer. can be used.
*13 When using functions that require a USB memory or SD memory card, a *17 Excluding GT2505-VTBD.
virtual drive in the personal computer is used. *18 GT25 wide and GT25 rugged models have a built-in sound output interface so
*14 GT2103-PMBD, GT2103-PMBDS, and GT2103-PMBDS2 require an SD memory that the sound output unit is not required.
card unit (GT21-03SDCD) separately. GT2103-PMBLS does not allow for SD *19 GT2505HS-VTBD supports the function with Ethernet connection only.
memory cards.

31
 For the details of functions, supported controllers, and connection types, please refer to the relevant manual or Help of the GOT2000 Series.
: Supported —: Not supported
Category Function name Necessary devices*1 GT27 GT25 GT25 Wide GT25 Rugged
Barcode function    
RFID function    
GOT Mobile function License, (SD memory card)    
VNC server function License    
Remote personal computer License    
operation function (Ethernet)
Remote personal computer RGB input unit or Video/RGB input unit * 8
— — —
operation function (serial)
Functions used with peripheral devices

Video display function Video input unit or Video/RGB input unit *8 — — —
RGB display function RGB input unit or Video/RGB input unit *8 — — —
Multimedia function Multimedia unit, CF card *8 — — —
External I/O function External I/O unit  *17 — —
Operation panel function External I/O unit  *17 — —
Screen design

Video output HDMI output Digital video output unit *8 — — —

function RGB output RGB output unit *8 — — —
File output (SD memory card or USB memory)    
Report Serial printer output (SD memory card or USB memory)    
function Ethernet printer output (SD memory card or USB memory)    
PictBridge printer output SD memory card or USB memory, printer unit  *17 — —
Sound output function Sound output unit*18  *17 *18 *18
Server function, Client function    
Mail send function    
Network drive function    
FTP server function (SD memory card or USB memory)    
File transfer function (FTP transfer) SD memory card or USB memory    
Specifications

File transfer function SD memory card or USB memory    

(GOT internal transfer)
MES interface function License, (SD memory card)    
Wireless LAN function Wireless LAN communication unit  *17  
USB mouse, USB keyboard    
Base screen    
Overlap window    
Superimpose window    
Dialog window    
Mobile screen    
Key window    
Language switching    
System information    
Operator authentication function (SD memory card or USB memory)    
Operation log SD memory card or USB memory    
Startup logo    
GOT functions

KANA KANJI conversion    

FA transparent    
SoftGOT-GOT link License key    
Backup/Restoration SD memory card or USB memory    
*9   
Multi-channel function 4 channels 4 channels 4 channels 4 channels
(Up to 3 units) (Up to 3 units*17) (No units can be mounted.) (No units can be mounted.)
Station No. switching    
GOT network interaction    
Screen gesture function  — — —
Object gesture function  — — —
Security key authentication function    
IP filter function    
File manager (SD memory card or USB memory)    

 Other than below:  
Vertical display*5 rotate 90° to left
(Rotate 90° to left) (Rotate 90° to left) (Rotate 90° to left)
GT2505: rotate 90° to right
Device monitor (SD memory card or USB memory)    
Sequence program monitor (iQ-R ladder) SD memory card or USB memory    
Sequence program monitor (Ladder) SD memory card or USB memory    
Sequence program monitor (SFC) SD memory card or USB memory    
Network monitor    
CC-Link IE Field Network diagnostics    
Intelligent module monitor    
Drive recorder (SD memory card or USB memory)    
Servo amplifier graph (SD memory card or USB memory)    
Maintenance functions

Motion program editor *4 *4 — —

Motion program I/O SD memory card or USB memory *4 *4 — —
Servo amplifier monitor    
R motion monitor    
Q motion monitor    
Motion SFC monitor SD memory card or USB memory    
CNC monitor 2   — —
CNC monitor *4 *4 — —
CNC data I/O SD memory card or USB memory *4 *4 — —
CNC machining program edit *4 *4 — —
Log viewer (SD memory card or USB memory)    
FX list editor   — —
FX ladder monitor    
iQSS utility SD memory card or USB memory    
System launcher    
System launcher (servo network)    
MELSEC-L troubleshooting    
*1 Necessary units when using GT27, GT25, GT25 wide, GT25 rugged, GT25 handy, *6 Excluding GT2103-PMBLS.
GT21, GT21 wide, or GS21 models are shown. Parenthesized devices are *7 GT2104-RTBD only.
required depending on conditions of use.
*8 Excluding GT2705-VTBD.
*2 Data is output to the printer that is recognized by the personal computer.
*9 To use multiple units such as extension units, barcode readers, or RFID
*3 CSV files are saved in the virtual drive of the personal computer so that it is controllers with a GT2705-VTBD, the total current consumption of the units
recommended to output the files to printers. should be less than the value that the GT2705-VTBD can provide. For the
*4 Only the GOTs with SVGA or higher resolution are supported. details, please refer to the relevant manual of the GOT2000 Series.
*5 Remote personal computer operation function (Ethernet) cannot be used. *10 GT2715-XTBA, GT2715-XTBD, GT2712-STBA, GT2712-STBD, GT2712-STWA,
The following screens are displayed horizontally: utility screen, monitor GT2712-STWD only.
and data management screens that are displayed from the utility screen
(sequence program monitor, etc.), video camera images in the multimedia
and video display functions. For the details of other GOT operations when
placed vertically, please refer to the relevant product manual or Help.

32
 For the details of functions, supported controllers, and connection types, please refer to the relevant manual or Help of the GOT2000 Series.
: Supported —: Not supported
Category Function name Necessary devices*1 GT25 Handy GT21 GT21 Wide GS21 GT SoftGOT2000
Barcode function — *6   
RFID function — *6   
GOT Mobile function License, (SD memory card)  — — — —
VNC server function License  —  — —
Remote personal computer
License  — — — —
operation function (Ethernet)
Remote personal computer
RGB input unit or Video/RGB input unit — — — — —
operation function (serial)
Functions used with peripheral devices

Video display function Video input unit or Video/RGB input unit — — — — —

RGB display function RGB input unit or Video/RGB input unit — — — — —
Multimedia function Multimedia unit, CF card — — — — —
External I/O function External I/O unit — — — — —
Operation panel function External I/O unit — — — — 
Screen design

Video output HDMI output Digital video output unit — — — — —

function RGB output RGB output unit — — — — —
File output (SD memory card or USB memory)  — — — —
Report Serial printer output (SD memory card or USB memory) — *6   *3
function Ethernet printer output (SD memory card or USB memory)  *15   —
PictBridge printer output SD memory card or USB memory, printer unit — — — — *3
Sound output function Sound output unit*18 — — — — 
Server function, Client function  — — — —
Mail send function  — — — 
Network drive function  — — — 
FTP server function (SD memory card or USB memory)  *15   —
File transfer function (FTP transfer) SD memory card or USB memory  *15   —

Specifications
File transfer function
SD memory card or USB memory  — — — —
(GOT internal transfer)
MES interface function License, (SD memory card)  — — — —
Wireless LAN function Wireless LAN communication unit — — — — —
USB mouse, USB keyboard  —  — 
Base screen     
Overlap window     
Superimpose window     
Dialog window     
Mobile screen  — — — —
Key window     
Language switching     
System information     
Operator authentication function (SD memory card or USB memory)  *16   
Operation log SD memory card or USB memory  — — — 
Startup logo     
KANA KANJI conversion  — — — 
GOT functions

FA transparent     —
SoftGOT-GOT link License key  — — — 
Backup/Restoration SD memory card or USB memory  *6   —
*19 *6  
4 channels 2 channels 2 channels 2 channels
Multi-channel function —
(No units can (No units can (No units can (No units can
be mounted.) be mounted.) be mounted.) be mounted.)
Station No. switching     
GOT network interaction  — — — 
Screen gesture function — — — — —
Object gesture function — — — — —
Security key authentication
function
 — — — —
IP filter function     —
File manager (SD memory card or USB memory)  — — — —
  
Vertical display*5 — —
(Rotate 90° to right) (Rotate 90° to left) (Rotate 90° to left)
Device monitor (SD memory card or USB memory)     —
Sequence program monitor (iQ-R ladder) SD memory card or USB memory  — — — —
Sequence program monitor (Ladder) SD memory card or USB memory  — — — —
Sequence program monitor (SFC) SD memory card or USB memory  — — — —
Network monitor  — — — —
CC-Link IE Field Network
diagnostics
 — — — —
Intelligent module monitor  — — — —
Drive recorder (SD memory card or USB memory)  — — — —
Maintenance functions

Servo amplifier graph (SD memory card or USB memory)  — — — —

Motion program editor — — — — —
Motion program I/O SD memory card or USB memory — — — — —
Servo amplifier monitor  — — — —
R motion monitor  — — — —
Q motion monitor  — — — —
Motion SFC monitor SD memory card or USB memory  — — — —
CNC monitor 2  — — — —
CNC monitor — — — — —
CNC data I/O SD memory card or USB memory — — — — —
CNC machining program edit — — — — —
Log viewer (SD memory card or USB memory)  — — — —
FX list editor  *7   —
FX ladder monitor  — — — —
iQSS utility SD memory card or USB memory  — — — —
System launcher  — — — —
System launcher (servo network)  — — — —
MELSEC-L troubleshooting  — — — —
*11 For the applicable communication units and option units, please refer to the *15 GT2104-RTBD, GT2103-PMBD only.
relevant product manual. *16 On GT2103-PMBLS, only the functions that do not require SD memory card
*12 Use the standard interface of the personal computer. can be used.
*13 When using functions that require a USB memory or SD memory card, a *17 Excluding GT2505-VTBD.
virtual drive in the personal computer is used. *18 GT25 wide and GT25 rugged models have a built-in sound output interface so
*14 GT2103-PMBD, GT2103-PMBDS, and GT2103-PMBDS2 require an SD memory that the sound output unit is not required.
card unit (GT21-03SDCD) separately. GT2103-PMBLS does not allow for SD *19 GT2505HS-VTBD supports the function with Ethernet connection only.
memory cards.

33
 Interaction with various Mitsubishi Electric industrial devices

In addition to various built-in functions, direct connection between Mitsubishi Electric industrial devices will improve
productivity and reduce costs.

Programmable controller Servo Inverter

A800 F800
E700 D700

etc. etc. etc.

Main connectable products (programmable controllers) of other companies

Specifications

Serial communication
Direct CPU connection Ethernet
Manufacturer Series/Model name connection
connection
RS-422 RS-232 RS-422 RS-232
KV-N24/KV-N40/KV-N60/KV-NC32T   ×  
KV Nano
KV-N14   ×  ×
KV-700   ×  
KEYENCE
KV-1000   ×  
CORPORATION
KV-3000   ×  
KV-5000 KV-5500/KV-5000   × × 
KV-7000 KV-7500/KV-7300   ×  
CJ1H   ×  2
SYSMAC CJ1 CJ1G   ×  2
CJ1M   ×  2
CJ2H   ×  2
SYSMAC CJ2
CJ2M   × 1 2
CP1H   × × ×
SYSMAC CP1 CP1L   × × ×
OMRON
Corporation CP1E (N type)*3   ×  ×
NJ501-1500/NJ501-1400/NJ501-1300/NJ501-1520/
× × × × 
NJ501-1420/NJ501-1320/NJ501-1340
NJ
NJ301-1200/NJ301-1100 × × × × 
NJ101-1000/NJ101-9000/NJ101-1020/NJ101-9020 × × × × 
NX1P2-1140DT/NX1P2-1140DT1/NX1P2-1040DT/
× × × × 
NX NX1P2-1040DT1/NX1P2-9024DT/NX1P2-9024DT1
NX701-1700/NX701-1600 × × × × 
FP0 × × ×  ×
FP1 ×  ×  ×
FP2 ×  ×  ×

Panasonic FP3 ×  ×  ×
Industrial FP5 ×  ×  ×
Devices SUNX FP10 ×  ×  ×
Co., Ltd. FP-M × × ×  ×
FP-∑ × × ×  ×
FP-X   ×  ×
FP-7   ×  ×
SIMATIC S7-200/SIMATIC S7-200 SMART × × ×  
SIMATIC S7-200 CN × × ×  ×
Siemens AG SIMATIC S7-300 × × ×  
SIMATIC S7-400 × × ×  
SIMATIC S7-1200 × × × × 
*1 Only CJ2M-CPU1 can be directly connected.
*2 Duplex Ethernet is not supported.
*3 Among CP1E (N type), only direct connection is possible for CPU units of 20 I/O points or less.

For details of connection, refer to the following "GOT2000 Series Connection Manual".
 Mitsubishi Electric Products (SH-081197ENG)  Non-Mitsubishi Electric Products 2 (SH-081199ENG)
 Non-Mitsubishi Electric Products 1 (SH-081198ENG)  Microcomputers, MODBUS/Fieldbus Products, Peripherals (SH-081200ENG)

34
Panel cutting dimensions

Unit: mm (inch)
Horizontal format (If the vertical format is selected, the
+2
dimension must be rotated 90˚.) A -0
10 (0.4”) or more
Cut holes in the following dimensions on the panel.
Ensure 10 mm of space in upper and lower parts of the panel for
mounting fixtures.

B +2
-0
Model A B
GS2110-WTBD 258 (10.16”) 200 (7.88”)
GS2107-WTBD 191 (7.52”) 137 (5.4”)

10 (0.4”) or more

Panel thickness: 1.6 to 4 mm

(0.06 to 0.15 inch)

Specifications
External dimensions

 GS2110-WTBD  GS2107-WTBD Unit: mm (inch)

10 (0.4”)

10 (0.4”)
56 (2.21”) 272 (10.71”) 50 (2”) 206 (8.12”)
136 (5.36”)

155 (6.11”)
199 (7.84”)

214 (8.43”)

10 (0.4”)

6 (0.24”)
6 (0.24”)
10 (0.4”)

The thickness of
the panel face is
1.6 to 4 mm
(0.06 to 0.15 inch)
The thickness of
the panel face is
1.6 to 4 mm 257 (10.12”) 190 (7.49”)
(0.06 to 0.15 inch)

Components names

 GS2110-WTBD
1) 2) 8)12)

13) 1) Display section

2) Touch panel
9)
10) 3) RS-232 interface
6) 4) RS-422 interface
5) Ethernet interface
6) USB interface (device)
11) 5) 3) 4) 7) 7) Cable clamp mounting hole
 GS2107-WTBD 8) Rating plate
1) 2) 12) 8) 9) 10) 13) 9) SD memory card interface
10) SD memory card access LED
11) Power terminal
6) 12) Ethernet communication status LED
13) Unit installation fitting

11) 5) 3) 4) 7)

35
 Specifications

 General specifications  Power supply specifications

Item Specifications Specifications
Item
Operating GS2110-WTBD GS2107-WTBD
ambient 0 to 50ºC Input power supply
temperature 24 V DC (+10%, -15%), ripple voltage 200 mV or less
voltage
Storage Power consumption 7.6 W (317 mA/24 V) or less 6.5 W (271 mA/24 V) or less
ambient -20 to 60ºC
temperature At backlight off 3.8 W (158 mA/24 V) or less 3.8 W (158 mA/24 V) or less
Operating/ 10 to 90%RH, non-condensing (The wet bulb temperature is 39°C). 17 A or less
Storage ambient When the ambient temperature exceeds 40°C, maintain the Inrush current
(6 ms, ambient temperature 25°C, at the maximum load)
humidity absolute humidity at 40°C and 90%.
Permissible
Half- Sweep instantaneous Within 5 ms
Frequency Acceleration
amplitude Count power failure time
5 to 8.4 Hz — 3.5 mm 10 times Noise immunity Conforms to IEC61000-4-4, 2 kV (power supply line)
Under
Conforms each in X,
Vibration intermittent Dielectric withstand 350 V AC for 1 minute (across power supply terminals and
to IEC 8.4 to 150 Hz 9.8 m/s2 — Y and Z
resistance vibration
61131-2 directions voltage earth)
Under 5 to 8.4 Hz — 1.75 mm 500 V DC across power terminals and earth, 10 MΩ or
Insulation resistance
continuous — more by an insulation resistance tester
vibration 8.4 to 150 Hz 4.9 m/s2 —
Shock Conforms to IEC 61131-2 (147m/s2, 3 times each in the X, Y, and Z
Specifications

resistance directions)
Must be free of lamp black, corrosive gas, flammable gas, or
Operating
excessive amount of electro conductive dust particles.
atmosphere
Must be no direct sunlight. (Same as for saving)
*1 D
 o not use or store the GOT under pressures higher than the atmospheric
Operating pressure of altitude 0 m (0 ft).
2000 m (6562 ft) max.
altitude*1 Failure to observe this instruction may cause a malfunction. When the air
Installation inside the control panel is purged by pressurization, the surface sheet may
Inside control panel be lifted by high pressure. As a result, the touch panel may be difficult to
location
press, and the sheet may be peeled off.
Overvoltage
II or less *2 T
 his indicates the section of the power supply to which the equipment is
category*2
assumed to be connected between the public electrical power distribution
Pollution
2 or less network and the machinery within the premises.
degree*3
Category II applies to equipment for which electrical power is supplied from
Cooling method Self-cooling fixed facilities. The surge voltage withstand level for up to the raged voltage
Grounding with a ground resistance of 100 Ω or less by using a of 300 V is 2500 V.
ground cable that has a cross-sectional area of 0.14 to 1.5 mm2 *3 T
 his index indicates the degree to which conductive pollution is generated
Grounding (solid wire), 0.14 to 1.0 mm2 (stranded wire), or 0.25 to 0.5 mm2 in the environment where the equipment is used.
(rod terminal with an insulation sleeve). If impossible, connect the In pollution degree 2, only non-conductive pollution occurs but temporary
ground cable to the control panel. conductivity may be produced due to condensation.

 Performance specifications
Specifications
Item
GS2110-WTBD GS2107-WTBD
Type TFT color liquid crystal display
Screen size 10" 7"
Resolution 800 × 480 dots
Display section*1 Display size W222 (8.74) × H132.5 (5.22) [mm] (inch) (Horizontal format) W154 (6.06) × H85.9 (3.38) [mm] (inch) (Horizontal format)
Display character 16-dot standard font: 50 characters 30 lines (Horizontal format)
Display color 65536 colors
Brightness 32-level adjustment
LED-type (no replacement required)
Backlight
Backlight off/screen saving time can be set.
Type Analog-resistive film type
Key size Minimum 2×2 [dots] (per key)
Touch panel*2 Number of points
Simultaneous 2-point presses prohibited (Only one point can be touched.)
touched simultaneously
Life 1 million times (operating force 0.98 N max.)
Flash memory (Internal) (9 MB), for storing project data, OS
Memory C drive
Life (Number of write times) 100000 times
1 ch
Transmission speed: 115200/57600/38400/19200/9600/4800 bps
RS-422
Connector shape: D-sub 9 pins (Female)
Terminating resistor: 330 Ω fixed
1 ch
RS-232 Transmission speed: 115200/57600/38400/19200/9600/4800 bps
Built-in interface Connector shape: D-sub 9 pins (Male)
Data Transfer method: 100BASE-TX, 10BASE-T, 1 ch
Ethernet
Connector shape: RJ-45 (modular jack)
USB (Full Speed 12 Mbps), 1 ch
USB
Connector shape: Mini-B
Conforms to the SD standard, 1 ch
SD memory card
Supported memory card: SDHC memory card, SD memory card
Buzzer output Single tone (LONG/SHORT/OFF adjustable)
Protective structure*3 IP65F (only the front part of the panel)
External dimensions W272 (10.71) × H214 (8.43) ×D56 (2.21) [mm] (inch) W206 (8.11) × H155 (6.11) × D50 (1.97) [mm] (inch)
Weight Approx. 1.3 kg (Excluding mounting fixtures) Approx. 0.9 kg (Excluding mounting fixtures)
Compatible software package Version1.215Z or later*4

*1 B
 right dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to completely avoid this symptom, as the liquid crystal
display comprises of a great number of display elements. Flickers and partial discoloration may be generated on the liquid crystal display panel due to individual
differences of panels. Please note that these phenomena appear due to its characteristic and are not caused by product defect.
*2 T
 he touch panel is an analog-resistive type. Simultaneous pressing of two or more areas on the touch panel may activate the switch between those areas. Do not
press two or more areas simultaneously on the touch panel.
*3 N
 ote that this does not guarantee all users' operation environment. In addition, the product may not be used in environments under exposition of oil or chemicals
for a long period of time, or in environments filled with oil-mist.
*4 When the software is earlier than GT Works3 Version1.215Z, installation of the GS installer is required.

36
Product list

 GOTs
Product name Model Screen size Display section/Display color Panel color Power
GS2110-WTBD 10" widescreen
GOT SIMPLE Series TFT color/65536 colors Black 24 V DC
GS2107-WTBD 7" widescreen

 Software
Product name Model Description
SW1DND-GTWK3-E Standard license product
HMI/GOT Screen Design Software DVD-ROM
SW1DND-GTWK3-EA English Version Volume license product*1*3
MELSOFT GT Works3
SW1DND-GTWK3-EAZ Additional license product*1*2
*1 T he desired number of licenses (2 or more) can be purchased. For details, please contact your local sales office.
*2 This product does not include the DVD-ROM. Only the license certificate with the product ID No. is issued.
*3 Volume license product is not sold separately and should be purchased with the standard license product.

 Options
Product name Mode Specifications
NZ1MEM-2GBSD SD memory card for GOT, 2 GB

Specifications
NZ1MEM-4GBSD SDHC memory card for GOT, 4 GB
SD memory card
NZ1MEM-8GBSD SDHC memory card for GOT, 8 GB
NZ1MEM-16GBSD SDHC memory card for GOT, 16 GB

 Cables
A cable is required to connect GOT and programmable controllers. Please prepare the appropriate cable.

RS-422
GOT SIMPLE MELSEC

RS-232

Ethernet
MELSEC iQ-R Series MELSEC-Q Series MELSEC iQ-F Series etc.

Product name Model Cable length Specifications

GT01-C10R4-8P 1m
GT01-C30R4-8P 3m
FXCPU ⇔ GOT
FXCPU direct connection cable,
GT01-C100R4-8P 10 m FXCPU expansion board ⇔ GOT
FXCPU expansion board connection cable
GT01-C200R4-8P 20 m [MINI-DIN 8 pins ⇔ D-sub 9 pins]
GT01-C300R4-8P 30 m
GT01-C30R4-25P 3m
QnA/ACPU/motion controller CPU [A series]/FXCPU ⇔ GOT
RS-422 Cable QnA/A/FXCPU direct connection cable, GT01-C100R4-25P 10 m RS-422 converter cable [FA-CNV CBL] ⇔ GOT
Computer link connection cable GT01-C200R4-25P 20 m Serial communication unit ⇔ GOT
[D-sub 25 pins ⇔ D-sub 9 pins]
GT01-C300R4-25P 30 m
GT09-C30R4-6C 3m
GT09-C100R4-6C 10 m Serial communication unit ⇔ GOT
Computer link connection cable Computer link unit ⇔ GOT
GT09-C200R4-6C 20 m [Stranded wire ⇔ D-sub 9 pins]
GT09-C300R4-6C 30 m
Q/LCPU ⇔ GOT
Q/LCPU direct connection cable GT01-C30R2-6P 3m
[MINI-DIN 6 pins ⇔ D-sub 9 pins]
FXCPU expansion board ⇔ GOT
FXCPU expansion board connection cable,
GT01-C30R2-9S 3 m FXCPU special adapter ⇔ GOT
FXCPU special adapter connection cable
[D-sub 9 pins ⇔ D-sub 9 pins]
FXCPU special adapter ⇔ GOT
FXCPU special adapter connection cable GT01-C30R2-25P 3m
RS-232 Cable [D-sub 25 pins ⇔ D-sub 9 pins]
Serial communication unit ⇔ GOT
GT09-C30R2-9P 3 m Computer link unit ⇔ GOT
[D-sub 9 pins ⇔ D-sub 9 pins]
Computer link connection cable
Serial communication unit ⇔ GOT
GT09-C30R2-25P 3 m Computer link unit ⇔ GOT
[D-sub 25 pins ⇔ D-sub 9 pins]
Personal computer [Screen design software] ⇔ GOT
USB Cable Data transfer cable GT09-C30USB-5P 3m
[USB-A ⇔ USB Mini-B]

37
 Global FA Centers

UK FA Center
Germany FA Center

Russia FA Center
Beijing FA Center
Korea
Czech Republic Europe FA Center FA Center MITSUBISHI
FA Center Tianjin FA Center ELECTRIC North America FA Center
Italy FA Center Guangzhou CORPORATION
Turkey FA Center Mexico Monterrey
FA Center FA Center
India Gurgaon FA Center Shanghai FA Center Mexico FA Center
India Ahmedabad FA Center Taipei FA Center Mexico City FA Center
India Pune FA Center Hanoi FA Center
India Bangalore FA Center Ho Chi Minh FA Center
India Chennai FA Center Thailand FA Center
ASEAN FA Center
Indonesia FA Center

Brazil FA Center
Support

China Mainland Thailand Mexico

Shanghai FA Center Thailand FA Center Mexico City FA Center
Mitsubishi Electric Automation (China) Ltd. Mitsubishi Electric Factory Automation Mitsubishi Electric Automation, Inc. Mexico Branch
10F, Mitsubishi Electric Automation Center, No.1386 (Thailand) Co., Ltd. Mariano Escobedo #69, Col. Zona Industrial,
Hongqiao Road, Changning District, Shanghai, China
12th Floor, SV. City Building, Office Tower 1, No.896/19 Tlalnepantla Edo. Mexico, C.P.54030
Tel: +86-21-2322-3030 / Fax: +86-21-2322-3000(9611#)
and 20 Rama 3 Road, Kwaeng Bangpongpang, Tel: +52-55-3067-7511 / Fax: -
Beijing FA Center Khet Yannawa, Bangkok 10120, Thailand
Mitsubishi Electric Automation (China) Ltd. Tel: +66-2682-6522 to 31 / Fax: +66-2682-6020 Mexico Monterrey FA Center
Beijing Branch MITSUBISHI ELECTRIC AUTOMATION, INC.
5/F, ONE INDIGO, 20 Jiuxianqiao Road Chaoyang India Monterrey Office
District, Beijing, China India Pune FA Center Plaza Mirage, Av. Gonzalitos 460 Sur, Local 28,
Tel: +86-10-6518-8830 / Fax: +86-10-6518-2938 Col. San Jeronimo, Monterrey, Nuevo Leon,
Mitsubishi Electric India Pvt. Ltd.
Tianjin FA Center Pune Branch C.P. 64640, Mexico
Mitsubishi Electric Automation (China) Ltd. Emerald House, EL-3, J Block, M.I.D.C., Bhosari, Tel: +52-55-3067-7521 / Fax: -
Tianjin Branch Pune - 411026, Maharashtra, India
Room 2003 City Tower, No.35, Youyi Road, Hexi Tel: +91-20-2710-2000 / Fax: +91-20-2710-2100 Brazil
District, Tianjin, China
Tel: +86-22-2813-1015 / Fax: +86-22-2813-1017 India Gurgaon FA Center Brazil FA Center
Mitsubishi Electric India Pvt. Ltd. Mitsubishi Electric do Brasil Comercio e
Guangzhou FA Center Gurgaon Head Office Servicos Ltda.
Mitsubishi Electric Automation (China) Ltd. Avenida Adelino Cardana, 293, 21 andar, Bethaville,
Guangzhou Branch 2nd Floor, Tower A & B, Cyber Greens, DLF Cyber City,
DLF Phase - III, Gurgaon - 122002, Haryana, India Barueri SP, Brasil CEP 06401-147
Room 1609, North Tower, The Hub Center, No.1068,
Xingang East Road, Haizhu District, Guangzhou, China Tel: +91-124-463-0300 / Fax: +91-124-463-0399 Tel: +55-11-4689-3000 / Fax: +55-11-4689-3016
Tel: +86-20-8923-6730 / Fax: +86-20-8923-6715 India Bangalore FA Center Europe
Mitsubishi Electric India Pvt. Ltd.
Taiwan Europe FA Center
Bangalore Branch
Mitsubishi Electric Europe B.V. Polish Branch
Taipei FA Center Prestige Emerald, 6th Floor, Municipal No.2,
SETSUYO ENTERPRISE CO., LTD. Madras Bank Road, Bangalore - 560001, ul. Krakowska 50, 32-083 Balice, Poland
3F, No.105, Wugong 3rd Road, Wugu District, Karnataka, India Tel: +48-12-630-47-00 / Fax: +48-12-630-47-01
New Taipei City 24889, Taiwan Tel: +91-80-4020-1600 / Fax: +91-80-4020-1699 Germany FA Center
Tel: +886-2-2299-9917 / Fax: +886-2-2299-9963
India Chennai FA Center Mitsubishi Electric Europe B.V. German Branch
Korea Mitsubishi Electric India Pvt. Ltd. Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany
Chennai Branch Tel: +49-2102-486-0 / Fax: +49-2102-486-1120
Korea FA Center Citilights Corporate Centre No.1, Vivekananda
Mitsubishi Electric Automation Korea Co., Ltd. UK FA Center
Road, Srinivasa Nagar, Chetpet, Chennai - 600031,
7F-9F, Gangseo Hangang Xi-tower A, 401, Mitsubishi Electric Europe B.V. UK Branch
Yangcheon-ro, Gangseo-Gu, Seoul 07528, Korea Tamil Nadu, India
Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, U.K.
Tel: +82-2-3660-9632 / Fax: +82-2-3663-0475 Tel: +91-44-4554-8772 / Fax: +91-44-4554-8773
Tel: +44-1707-28-8780 / Fax: +44-1707-27-8695
India Ahmedabad FA Center Italy FA Center
ASEAN
Mitsubishi Electric India Pvt. Ltd. Mitsubishi Electric Europe B.V. Italian Branch
ASEAN FA Center Ahmedabad Branch
Centro Direzionale Colleoni - Palazzo Sirio,Viale
Mitsubishi Electric Asia Pte. Ltd. B/4, 3rd Floor, SAFAL Profitaire, Corporate Road,
307 Alexandra Road, Mitsubishi Electric Building, Colleoni 7, Agrate Brianza (MB), Italy
Prahaladnagar, Satellite, Ahmedabad - 380015,
Singapore 159943 Tel: +39-039-60531 / Fax: +39-039-6053-312
Gujarat, India
Tel: +65-6470-2480 / Fax: +65-6476-7439 Tel: +91-79-6512-0063 / Fax: - Czech Republic FA Center
Indonesia Mitsubishi Electric Europe B.V. Czech Branch
Americas
Avenir Business Park, Radlicka 751/113e, 158 00
Indonesia FA Center North America FA Center Praha5, Czech Republic
PT. Mitsubishi Electric Indonesia Cikarang Office Mitsubishi Electric Automation, Inc.
Jl. Kenari Raya Blok G2-07A Delta Silicon 5, Tel: +420-251-551-470 / Fax: +420-251-551-471
500 Corporate Woods Parkway, Vernon Hills,
Lippo Cikarang - Bekasi 17550, Indonesia
IL 60061, U.S.A.
Russia FA Center
Tel: +62-21-2961-7797 / Fax: +62-21-2961-7794 Mitsubishi Electric (Russia) LLC
Tel: +1-847-478-2100 / Fax: +1-847-478-2253
St. Petersburg Branch
Vietnam
Mexico Piskarevsky pr. 2, bld 2, lit “Sch”, BC “Benua”,
Hanoi FA Center
Mitsubishi Electric Vietnam Co., LTD. Mexico FA Center office 720; 195027, St. Petersburg, Russia
Tel: +7-812-633-3497 / Fax: +7-812-633-3499
Ha Noi Office MITSUBISHI ELECTRIC AUTOMATION, INC.
6th Floor, Detech Tower, 8 Ton That Thuyet Street, Queretaro Office Turkey FA Center
My Dinh 2 Ward, Nam Tu Liem District, Hanoi City, Vietnam Parque Tecnologico Innovacion Queretaro Lateral Mitsubishi Electric Turkey A.S. Umraniye Branch
Tel: +84-4-3937-8075 / Fax: +84-4-3937-8076 Carretera Estatal 431, Km 2+200, Lote 91 Serifali Mahallesi Nutuk Sokak No:5, TR-34775
Ho Chi Minh FA Center Modulos 1 y 2 Hacienda la Machorra, CP 76246, Umraniye / Istanbul, Turkey
Mitsubishi Electric Vietnam Co., LTD. El Marques, Queretaro, Mexico Tel: +90-216-526-3990 / Fax: +90-216-526-3995
Ho Chi Minh Head Office Tel: +52-442-153-6014 / Fax: -
Unit 01-04, 10th Floor, Vincom Center, 72 Le
Thanh Ton Street, District 1, Ho Chi Minh City, Vietnam
Tel: +84-8-3910-5945 / Fax: +84-8-3910-5947

38
Related materials

 GOT SIMPLE Series solution catalogs

Support
Simple Solution Catalog Graphic Operation Terminal Graphic Operation Terminal
L(NA)08602ENG GOT2000 Drive Control (Servo) GOT2000 Drive Control (Inverter)
Interactive Solutions Interactive Solutions
L(NA)08335ENG L(NA)08572ENG

 HMI catalogs

Graphic Operation Terminal Industrial Computer

GOT2000 Series MELIPC Series MI3000
L(NA)08270ENG L(NA)08600ENG

Trademarks and registered trademarks

ETHERNET is a registered trademark of Xerox Corporation.
MODBUS is a registered trademark of SCHNEIDER ELECTRIC USA, INC.
SD and SDHC Logos are registered trademarks or trademarks of SD-3C, LLC.
Windows ia a registered trademark or trademark of Microsoft Corporation in the United States, Japan and other countries.
Other product and company names are either trademarks or registered trademarks of their respective owners.

The actual color may differ slightly from the pictures in this catalog.
The actual display may differ from what are shown on GOT screen images.

Precautions before use For safe use

This publication explains the typical features and functions of the products • To use the products given in this publication properly, always read
herein and does not provide restrictions or other information related to the relevant manuals before beginning operation.
• The products have been manufactured as general-purpose parts
usage and module combinations. Before using the products, always read for general industries, and are not designed or manufactured to
the product user manuals. Mitsubishi Electric will not be held liable for be incorporated in a device or system used in purposes related to
human life.
damage caused by factors found not to be the cause of Mitsubishi Electric;
• Before using the products for special purposes such as nuclear
opportunity loss or lost profits caused by faults in Mitsubishi Electric power, electric power, aerospace, medicine or passenger-carrying
products; damage, secondary damage, or accident compensation, whether vehicles, consult with Mitsubishi Electric.
• The products have been manufactured under strict quality control.
foreseeable or not, caused by special factors; damage to products other However, when installing the products where major accidents or
than Mitsubishi Electric products; or any other duties. losses could occur if the products fail, install appropriate backup or
fail-safe functions in the system.

39
 Global Partner. Local Friend.

The release date varies depending on the product and your region. For details, please contact your local sales office.

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS: 1-14, YADA-MINAMI 5, HIGASHI-KU, NAGOYA, JAPAN

Country/Region Sales office

USA +1-847-478-2100 Singapore +65-6473-2308 Germany +49-2102-486-0 Turkey +90-216-526-3990
Mexico +52-55-3067-7511 Thailand +66-2682-6522 to 31 UK +44-1707-28-8780 Poland +48-12-347-65-00
Brazil +55-11-4689-3000 Indonesia +62-21-3192-6461 Italy +39-039-60531 Russia +7-812-633-3497
China +86-21-2322-3030 Vietnam +84-8-3910-5945 Spain +34-935-65-3131 South Africa +27-11-658-8100
Taiwan +886-2-2299-2499 India +91-20-2710-2000 France +33-1-55-68-55-68
Korea +82-2-3660-9530 Australia +61-2-9684-7777 Czech +420-251-551-470

New publication, effective July 2019.

L(NA)08649ENG-B 1907(MEE) Specifications are subject to change without notice.