0% found this document useful (0 votes)
67 views

Data Sheet 6ES7222-1BF32-0XB0: General Information

Digital Output

Uploaded by

Gaber3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
67 views

Data Sheet 6ES7222-1BF32-0XB0: General Information

Digital Output

Uploaded by

Gaber3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Data sheet 6ES7222-1BF32-0XB0

SIMATIC S7-1200, Digital output SM 1222, 8 DO, 24 V DC, transistor


0.5 A

General information
Product type designation SM 1222, DQ 8x24 V DC/0.5 A

Supply voltage
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V

Input current
from backplane bus 5 V DC, max. 120 mA

Power loss
Power loss, typ. 1.5 W

Digital outputs
Number of digital outputs 8
● in groups of 1
Short-circuit protection No; to be provided externally
Limitation of inductive shutdown voltage to typ. (L+) -48 V
Switching capacity of the outputs
● with resistive load, max. 0.5 A
● on lamp load, max. 5 W

6ES7222-1BF32-0XB0 Subject to change without notice


Page 1/3 09/25/2020 © Copyright Siemens
Output voltage
● Rated value (DC) 24 V
● for signal "0", max. 0.1 V; with 10 kOhm load
● for signal "1", min. 20 V DC
Output current
● for signal "1" rated value 0.5 A
● for signal "0" residual current, max. 10 µA
Output delay with resistive load
● "0" to "1", max. 50 µs
● "1" to "0", max. 200 µs
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max. 4 A; Current per mass
Relay outputs
Switching capacity of contacts
— with inductive load, max. 0.5 A
— on lamp load, max. 5 W
— with resistive load, max. 0.5 A
Cable length
● shielded, max. 500 m
● unshielded, max. 150 m

Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm Yes
Diagnostics indication LED
● for status of the outputs Yes

Potential separation
Potential separation digital outputs
● between the channels, in groups of 1
● between the channels and backplane bus 500 V AC

Degree and class of protection


IP degree of protection IP20

Standards, approvals, certificates


CE mark Yes
CSA approval Yes
UL approval Yes
cULus Yes
FM approval Yes
RCM (formerly C-TICK) Yes
KC approval Yes
Marine approval Yes

6ES7222-1BF32-0XB0 Subject to change without notice


Page 2/3 09/25/2020 © Copyright Siemens
Ambient conditions
Free fall
● Fall height, max. 0.3 m; five times, in product package
Ambient temperature during operation
● min. -20 °C
● max. 60 °C
● horizontal installation, min. -20 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -20 °C
● vertical installation, max. 50 °C
● permissible temperature change 5°C to 55°C, 3°C / minute
Ambient temperature during storage/transportation
● min. -40 °C
● max. 70 °C
Air pressure acc. to IEC 60068-2-13
● Storage/transport, min. 660 hPa
● Storage/transport, max. 1 080 hPa
Relative humidity
● Operation at 25 ℃ without condensation, max. 95 %

Connection method
required front connector Yes

Mechanics/material
Enclosure material (front)
● Plastic Yes

Dimensions
Width 45 mm
Height 100 mm
Depth 75 mm

Weights
Weight, approx. 180 g

last modified: 09/11/2020

6ES7222-1BF32-0XB0 Subject to change without notice


Page 3/3 09/25/2020 © Copyright Siemens

You might also like