Standards

AA/MP-AES, ICP-OES, and ICP-MS

Standards
Agilent o ers a comprehensive range o single and multi-element standards, ionization bu ers,
metallo-organic and biodiesel standards, solvents, and environmental standards or atomic
spectroscopy. With the assurance o NIST traceability, Agilent’s Certi ied Re erence Materials
and standard mixes o er accurate, reliable calibrations at great value.
Every solution is manu actured using high purity starting materials, which are regularly tested in
accordance with NIST guidelines to provide traceability. All Agilent inorganic spectroscopy
standards include a Certi icate o Analysis (CoA) that details the certi ied concentration,
measurement uncertainty, and actual concentration values or up to 68 trace impurities (assayed
using an Agilent ICP-MS or ICP-OES/ICP-MS standards).
In addition, the CoA details the method used or certi ication, intended use, instructions or
proper use, and recommendations or appropriate conditions o storage.

• Gives you con idence in your AAS, ICP-OES or ICP-MS, and MP-AES results
• Standards shipped rom stock to maximize uptime
• Supplied with a Material Sa ety Data Sheet (MSDS) and CoA or complete assurance
• All standards packaged in preleached HDPE bottles, secured with a tamper-evident seal

To learn more about Agilent Certi ied Re erence Materials, go to

www.agilent.com/chem/spectroscopystandards

AA, MP-AES, and ICP-OES Standards

Wavelength Calibration Solutions or 5100/5110 ICP-OES, 700 Series, and Vista
Series ICP-OES and MP-AES
Description Comments Part No.
Wavelength calibration 500 mL, contains 50 mg/L Al, As, Ba, Cd, Co, Cr, Cu, Mn,
concentrate, or ICP-OES and Mo, Ni, Pb, Se, Sr, Zn, and 500 mg/L K in 5 % HNO3 6610030000
MP-AES Dilute 10 times prior to use
500 mL, contains 5 mg/L Al, As, Ba, Cd, Co, Cr, Cu, Mn,
Wavelength calibration solution,
Mo, Ni, Pb, Se, Sr, Zn, and 50 mg/L K in 5 % HNO3 6610030100
or ICP-OES and MP-AES
Ready to use
500 mL 0 ppm, contains pure ASTM Type 1A water with
5 % HNO3
Calibration blank solution or ICP-
Suitable or use as a calibration blank or or dilution o the 5190-7001
OES and MP-AES
wavelength calibration concentrate
Ready to use

145 AGILENT ESSENTIAL CHROMATOGRAPHY AND SPECTROSCOPY CATALOG SERIES

 Standards

Intended use

Manu actured in
an ISO 9001, ISO Guide
34 acility and certi ied Certi ied concentration(s)
in an ISO/IEC 17025 reported (with uncertainty
testing laboratory values in w/v and w/w)

Made rom the highest Assayed by high

purity raw materials per ormance ICP-OES,
and solvents a method developed
by NIST to assure
Agilent ICP-MS* direct traceability
used to assay to the appropriate
the impurities NIST 3100 Series o
single-element SRMs
Traceable to NIST
Method(s) used to
Instructions or proper determine certi ied
use and appropriate concentrations
conditions o storage
Actual concentration
Period o validity values reported or up
to 68 impurity elements
Date o release

Date o expiration
veri ied by short and
long-term stability
studies or all standards

*Impurities in wear metal, metallo-organic, and biodiesel standards assayed using ICP-OES, XRF, or other
elemental analysis techniques

Certi icate o Analysis or an Agilent CRM, depicting the additional levels o quality control that are
applied during the manu acture o the spectroscopy CRM.

WWW.AGILENT.COM/CHEM/SPECTROSCOPY 146
 Standards

IntelliQuant Calibration Standards

or 5100/5110 SVDV/VDV ICP-OES
Agilent’s IntelliQuant eature or the 5100/5110 Dual View ICP-OES identi ies and calculates a
semiquantitative concentration in a sample, expanding the capabilities o a classic ICP-OES analysis.
This allows analysts to quickly check the semiquantitative concentration o many elements in their
sample, without changing their routine methods or preparing extra multi-element standards, which
can be technically challenging and time consuming.
IntelliQuant includes de ault calibrations, available or axial, radial and synchronous vertical dual view
modes, which allow the estimation o up to 70 elements in a sample without the need to analyze any
additional standards. I more accurate results are required, just update the de ault calibrations by
using the multi-element IntelliQuant calibration standards (either individually or the complete kit).
When measured, this updates the de ault IntelliQuant calibration or all 69 elements. These
standards are ideal or labs requiring more accurate semiquantitative analysis without time
consuming standard preparation.
For more details, please see Rapid Sample Assessment and Simpli ied Method Development with
IntelliQuant, Agilent publication 5991-6876EN.

IntelliQuant Calibration Standards or 5100/5110 SVDV/VDV ICP-OES

Description Comments Part No.
Contains our solutions that are used to update the presupplied
IntelliQuant calibration to achieve a greater level o accuracy or
IntelliQuant calibration kit,
semiquantitative analysis. Includes multi-element standard #1 (p/n 5190-9425
or 5110 DV ICP-OES
5190-9422), #2 (p/n 5190-9423), and #3 (p/n 5190-9424) plus
the nitric acid blank (p/n 5190-7001)*
Individual IntelliQuant Standards
Multi-element standard #1 used to update the presupplied
IntelliQuant calibration or semiquantitative analysis with 5110 DV
IntelliQuant multi-element ICP-OES. 500 mL bottle
standard #1, 500 mL, Contains 100 mg/L o Al, As, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, 5190-9422
100 ppm (ready to use) Cu, Dy, Er, Eu, Fe, Ga, Gd, Ho, In, K, La, Li, Lu, Mg, Mn, Na, Nd, Ni,
P, Pb, Pr, Rb, Re, Sc, Se, Sm, Sr, Tb, Th, Tl, Tm, U, V, Y, Yb, and Zn in
5 % HNO3.
Multi-element standard #2 used to update the presupplied
IntelliQuant multi-element IntelliQuant calibration or semiquantitative analysis with 5110 DV
standard #2, 500 mL, ICP-OES. 500 mL bottle 5190-9423
100 ppm (ready to use) Contains 100 mg/L o Ag, Ge, H , Mo, Nb, Sb, Si, Sn, Ta, Ti, W, and
Zr in 5 % HNO3 with trace HF.

(Continued)

147 AGILENT ESSENTIAL CHROMATOGRAPHY AND SPECTROSCOPY CATALOG SERIES

 Standards

IntelliQuant Calibration Standards or 5100/5110 SVDV/VDV ICP-OES

Description Comments Part No.
Multi-element standard #3 used to update the presupplied
IntelliQuant multi-element
IntelliQuant calibration or semiquantitative analysis with 5110 DV
standard #3, 500 mL, 5190-9424
ICP-OES. 500 mL bottle
100 ppm (ready to use)
Contains 100 mg/L o Au, Ir, Os, Pd, Pt, Rh, Ru, and Te in 10 % HCl.
IntelliQuant single
Single element Hg standard used to update the presupplied
element standard or Hg,
IntelliQuant calibration or semiquantitative analysis with 5110 DV 5190-8575
100 mL, 10 ppm (ready
ICP-OES. 100 mL bottle o 10 mg/L Hg in 5 % HNO3.
to use)
Pure ASTM Type 1A water with 5 % HNO3. 500 mL bottle.
Bottle calibration blank
Suitable or use as a calibration blank when updating the
solution or ICP-OES, 500 5190-7001
presupplied IntelliQuant calibration or semiquantitative analysis
mL, 0 ppm (ready to use)
with 5110 DV ICP-OES.
*A Hg standard is not part o this kit. I a Hg solution is required, it must be ordered as a separate line item

Multi-element Calibration Standards

Description Part No.
Calibration mix 1 125 mL, contains 100 mg/L Sb, Mo, Sn, and Tl in 2 % HNO3 + 0.5 % HF 6610030500
Calibration mix 2 125 mL, contains 100 mg/L Ag, Al, As, Ba, Be, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se,
6610030600
Tl, Th, U, V, and Zn in 5 % HNO3
Calibration mix majors 125 mL, contains 500 mg/L Ca, Fe, K, Mg, and Na in 5 % HNO3 6610030700

TIPS AND TOOLS

Store standards at controlled room temperature per USP 35 (10.30.60). Do not reeze, heat, or
expose to direct sunlight. Minimize exposure to moisture or high humidity.

WWW.AGILENT.COM/CHEM/SPECTROSCOPY 148
 Standards

1,000 μg/mL Single Element Standards or AA and MP-AES

Description Matrix Part No. 100 mL Part No. 500 mL
Aluminum (Al) 5 % HCI 5190-8256 5190-8257
Antimony (Sb) 30 % HCI 5190-8258 5190-8259
Arsenic (As) 5 % HNO3 5190-8260 5190-8261
Barium (Ba) 5 % HNO3 5190-8262 5190-8263
Beryllium (Be) 5 % HNO3 5190-8264 5190-8265
Bismuth (Bi) 5 % HNO3 5190-8266 5190-8267
Boron (B) H2O 5190-8268 5190-8269
Cadmium (Cd) 5 % HNO3 5190-8270 5190-8271
Calcium (Ca) 5 % HNO3 5190-8272 5190-8273
Copper (Cu) standard, 5190-8280 Cesium (Ce) 5 % HNO3 5190-8274
Chromium (Cr) 5 % HCl 5190-8275 5190-8276
Cobalt (Co) 5 % HNO3 5190-8277 5190-8278
Copper (Cu) 5 % HNO3 5190-8279 5190-8280
Gold (Au) 20 % HCl 5190-8282 5190-8283
Indium (In) 5 % HNO3 5190-8284
Iron (Fe) 5 % HNO3 5190-8285 5190-8286
Lead (Pb) 5 % HNO3 5190-8287 5190-8288
Lithium (Li) 5 % HNO3 5190-8289 5190-8290
Magnesium (Mg) 5 % HNO3 5190-8291 5190-8292
Manganese (Mn) 5 % HNO3 5190-8293 5190-8294
Mercury (Hg) 5 % HNO3 5190-8295 5190-8296

(Continued)

149 AGILENT ESSENTIAL CHROMATOGRAPHY AND SPECTROSCOPY CATALOG SERIES