Scribd
Upload
57 views

ETABS Concrete Frame Design: ETABS 18.1.1 License # 1UVSX4RW3KZG2RH

The document summarizes the design of a column element (C8) with a cross section of 500mm x 400mm and rebar area of 5834 mm2. Key parameters reported include: - Axial load capacity of 1495355.6 N - Major bending moment capacity of 300862538.13 N-mm - Minor bending moment capacity of -49030879.71 N-mm - Minimum major and minor bending moments of 33296584.62 N-mm and 29907111.94 N-mm - Shear capacities and ratios meeting code requirements

Uploaded by

Sandeep Shakya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
57 views

ETABS Concrete Frame Design: ETABS 18.1.1 License # 1UVSX4RW3KZG2RH

The document summarizes the design of a column element (C8) with a cross section of 500mm x 400mm and rebar area of 5834 mm2. Key parameters reported include: - Axial load capacity of 1495355.6 N - Major bending moment capacity of 300862538.13 N-mm - Minor bending moment capacity of -49030879.71 N-mm - Minimum major and minor bending moments of 33296584.62 N-mm and 29907111.94 N-mm - Shear capacities and ratios meeting code requirements

Uploaded by

Sandeep Shakya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ETABS 18.1.

1 License #*1UVSX4RW3KZG2RH

ETABS Concrete Frame Design


IS 456:2000 + IS 13920:2016 Column Section Design

Column Element Details Type: Ductile Frame (Summary)


Level Element Unique Name Section ID Combo ID Station Loc Length (mm) LLRF
Story1 C8 320 C-500X400-M25 DCon17 2800 3300 1

Section Properties
b (mm) h (mm) dc (mm) Cover (Torsion) (mm)
400 500 58 30

Material Properties
Ec (MPa) fck (MPa) Lt.Wt Factor (Unitless) fy (MPa) fys (MPa)
25000 25 1 500 500

Design Code Parameters


ɣC ɣS
1.5 1.15

Axial Force and Biaxial Moment Design For Pu , Mu2 , Mu3


Design Pu Design Mu2 Design Mu3 Minimum M2 Minimum M3 Rebar Area Rebar %
N N-mm N-mm N-mm N-mm mm² %
1495355.6 300862538.13 -49030879.71 29907111.94 33296584.62 5834 2.92

Axial Force and Biaxial Moment Factors


K Factor Length Initial Moment Additional Moment Minimum Moment
Unitless mm N-mm N-mm N-mm
Major Bend(M3) 0.655016 2800 135561889.82 0 33296584.62
Minor Bend(M2) 0.605674 2800 -20096542.46 0 29907111.94

Shear Design for Vu2 , Vu3


Shear Vu Shear Vc Shear Vs Shear Vp Rebar Asv /s
N N N N mm²/mm
Major, Vu2 109519.4 202612.56 70719.46 83584.52 0.44
Minor, Vu3 182340.93 198262.31 68399.32 182340.93 0.55

Joint Shear Check/Design


Joint Shear Shear Shear Shear Joint Shear
Force VTop Vu,Tot Vc Area Ratio
N N N N mm² Unitless
Major Shear, Vu2 0 59703.23 473159.21 1000000 200000 0.473
Minor Shear, Vu3 0 130243.52 909190.18 1000000 200000 0.909

VEGETABLE MART_TEMPLATE_NSW_REV1.EDBPage 1 of 2 9/27/2020


ETABS 18.1.1 License #*1UVSX4RW3KZG2RH

(1.4) Beam/Column Capacity Ratio


Major Ratio Minor Ratio
0.307 0.901

Additional Moment Reduction Factor k (IS 39.7.1.1)


Ag Asc Puz Pb Pu k
mm² mm² N N N Unitless
200000 5834.5 4437924.38 1101046.38 1495355.6 0.881833

Additional Moment (IS 39.7.1)


Consider Length Section KL/Depth KL/Depth KL/Depth Ma
Ma Factor Depth (mm) Ratio Limit Exceeded Moment (N-mm)
Major Bending (M3 ) Yes 0.848 500 3.668 12 No 0
Minor Bending (M2 ) Yes 0.848 400 4.24 12 No 0

VEGETABLE MART_TEMPLATE_NSW_REV1.EDBPage 2 of 2 9/27/2020

You might also like