Scribd
Upload
92 views

For New Equipment Sales, Call: Digger Derrick

This document provides specifications and details about the Altec DT65H digger derrick truck. It lists features such as hydraulic overload protection and side load protection. It also provides information on options, ratings, dimensions, and photographs of the riding seat and controls.

Uploaded by

SeguridadLaboral
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
92 views

For New Equipment Sales, Call: Digger Derrick

This document provides specifications and details about the Altec DT65H digger derrick truck. It lists features such as hydraulic overload protection and side load protection. It also provides information on options, ratings, dimensions, and photographs of the riding seat and controls.

Uploaded by

SeguridadLaboral
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DT65H

FOR NEW EQUIPMENT SALES, CALL


800.958.2555
TO S P E A K W I T H A N A LT E C R E P R E S E N TAT I V E DIGGER DERRICK
or visit us online at altec.com
DT65H

FEATURES OPTIONS

• 5-Function Hydraulic Overload Protection (HOP) • Hydra-Sync Two-Speed Auger Motor


• Hydraulic Side Load Protection (HSLP) • Full-View Riding Seat
• Full Capacity Fiberglass Upper Boom • 60,000 lb Rear Bumper Recovery Package
• Transferable Steel Boom Flares • Outrigger Deploying Ladder
• Insulating Upper Boom, Rated to 46kV and Below
Additional accessories available through Altec Supply include a 5 pound fire extinuisher, triangular
• Hydraulic Tilting Pole Guides with Pole Guide reflectors/road flares, fall protection equipment, outrigger pads and 2 inch front/rear receiver hitches.
Interlock
• Outrigger Interlock System
The Altec “H” Series derrick is a fully hydraulic derrick that incorporates a
• Operator Main Control Panel with Multi-Lever Controls high-flow piston pump into the hydraulic system. The variable displacement
• Emergency Stop Switch on Main Control Panel pump generates a maximum flow of 43 GPM. Because flow is provided by
• Altec Rota-Float a single variable displacement piston pump, maximum flow is available to
any function for superior multi-functioning which includes 4-function boom
• 15,000 lb Planetary Winch
operation. Additional benefits of the “H” series derrick is 50% reduction of
• 15,000 ft-lb Auger Digger Motor heat generation during heavy digging, 20% reduction of heat generation during
• 360o of Ingress and Egress to the Riding Seat continuous winch operation and reduced fuel consumption.

Rating Classification: 10 ft radius 21,051 lb (9,548 kg)

Maximum Lift Capacity 30,000 lb (13,608 kg)

Sheave Height 65.0 ft (19.8 m)


(Both Booms Extended)

Intermediate Boom Extended, Upper Boom


50.8 ft (15.4 m)
Retracted

Both Booms Retracted 35.9 ft (10.9 m)

Horizontal Reach from Centerline of


SPECIFICATIONS

Rotation 56.2 ft (17.1 m)


(Both Booms Extended)

Intermediate Boom Extended, Upper Boom


41.8 ft (12.7 m)
Retracted

Both Fully Booms Retracted 26.8 ft (8.1m)

Intermediate Boom Extension 15.1 ft (4.6 m)

Upper Boom Extension 14.5 ft (4.4 m)

Digger Radius (min - max) 26.9 ft (9.1 m) - 35.8 ft (10.9 m)

Boom Articulation -15 to 80°

Rotation Continuous planetary drive

*Based on a 40 in (1016 mm) chassis frame height.


ANSI A10.31-2006 Compliant

FULL-VIEW RIDING SEAT 8-LEVER RIDING SEAT 360o INGRESS/EGRESS


The standard single handle riding seat comes with an open front, The standard multi-lever riding seat comes with ingress, egress The standard full-view and 8-lever riding seats come with a full
full-view seat that provides superior multi-functioning through the access from the front or the back. 360o access to the riding seat to provide superior ingress, egress
use of the “T-style” handle and best-in-class ingress, egress and independent of the unit slewing angle.
boomtip visibility.

For more complete information on Altec products and services, visit us on the web at www.altec.com. Material and specifications are subject to change without notice. Featured units in photos may include optional features. Please contact
an Altec representative for all available options. Altec® and the Altec logo are registered trademarks of Altec Inc. in the United States and various other countries and may not be used without permission.
© 2016 Altec Inc. All Rights Reserved. AIOSDT65-119-v1

NEW EQUIPMENT SALES | 800.958.2555 | [email protected] | ALTEC.COM

You might also like