Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial

res Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

BRIEF INTRODUCTION
Founded in 1958, Guizhou Qianjin Rubber Co. Ltd., one of subsidiaries of Guizhou Tyre Co.,
Ltd., is specialized in developing and producing Advance brand pneumatic industrial tyres, solid
CONTENTS
industrial tyres and rubber air springs. The company possesses strong product development
capacity, complete test facilities, excellent processing equipments and a complete quality Tyre Size Designation…………………………………………………………..2
assurance system. Our products has been certified by various relevant authorities through
Industrial Pneumatic Tyres…………………………………………………3-10
international available standards such as DOT and ECE.
In 1999, the company cooperated with British Watts Industrial Tyres, introduced solid tyre Pneumatic Tyre Rim Solid Tyres………………………………………….11-16
manufacturing technology and equipments and regularly employed foreign specialists as
Pressed-on Band Solid Tyres…………………………………………….17-18
technical advisors. The products’ technical features and characters conform with European
ETRTO, American TRA, Japanese JATMA and Chinese relevant standards. The company Cured-on Solid Tyres………………………………………………………….19
has developed and produced 5 series and more than 200 kinds and sizes of solid tyres fitted
with pneumatic tyre rims, low rolling resistance solid tyres, POB solid tyres, non-marking The Structure of Flatproof Tyres……………………………………………20
white(colored) solid tyres and filled tyres with yearly production capacity of 350,000 tyres and
Assembly diagram for the Pneumatic Tyre Rim Solid Tyres………..Cover3rd
over 50% of total production exported to Europe, North and South Americas, the Oceanic
Islands, Asia and Africa. The company supplies products and services to forklift manufacturers
in China such as Hefei TCM, Hangzhou, Shanghai HYSTER, Shanghai NICHIYU, Beijing
HYUNDAI, Xiamen and Jingjiang.

SPECIAL TYRES SIDEWALL MARKS INSTRUCTION USE INSTRUCTIONS FOR INDUSTRIAL TYRE
The technical data involved in this use instruction is for normal sites use only, please consult
technical department for customization if the tyres will be used in special area.(Special types
tyres available for selection: anti-static tyre, non-marking tyre, heat resistance tyre, high-speed
tyre, anti-wet tyre, oil-proof tyre, all-weather tyre, low rolling resistance tyre.)
Anti-Static Tyres Easi-Fit Tyres Anti-Wet Tyres
Please note the following when you use technical data covering here:
1. The speed of counterbalanced forklift means the unloaded maximum speed. Overloading is
not allowed even if driving at low speed.
2. When speed is higher than 25km/h, should consult with tyre and rim manufacturer to define
Heat-Resistance Tyres All-Weather Tyres Low Rolling Resistance tyre and rim match well, so as to reach expected using effect.
3. Load capacity of drive wheel is for intermittent use only. Intermittent use means that tyres
are not operating on continuous basis at indicated speed and load. Normally, loading one
trip, but unloading another trip.
4. Please note that the dimensions of rim should be confirmed when use the pneumatic tyre
rims solid tyres, especially rim width, it should be consistent with marked rim width on tyre.
Meanwhile, the maximum load capacity should be confirmed with rim manufacturer. Load
capacity will be limited strictly by the minimum load capacity of rim and tyre.
5. Operating radium is less than 2000m. Please consult technical department, if it is needed
to use for longer haul or when it is used for rotating equipment and on container lifting
machine.

Products available as follow:

1. Drive tyres and steer tyres for counterbalanced forklift and other industrial vehicle;
2. Tyres for wheel and fixed cranes.
3. Tyres for bridge-erecting machine, gantry cranes, reachstacker, container cranes.
4. Tyres for passenger boarding bridge, loader.

1
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

TYRE SIZE DESIGNATION INDUSTRIAL PNEUMATIC TYRES

1. Size Designation for the Industrial Pneumatic Tyres

OB-502 （Deeper rock tread, Standard configuration
for the diesel forklift）

Conventional section tyre Low profile tyre Design New Tyre

Tyre Load Limits at Various Max.speed and Various Types of Equipment(kg)
Inflated Counterbalanced Lift Trucks Other’s Industrial Vehicles
Tyre Size Ply Rating Tyre Type Standard Pressure Valves
6.50 - 10 NHS 12 - 16.5 NHS Rim O.D. S.W. kPa
Not-highway service Not-highway service mm mm DRIVER STEER DRIVER STEER

Nominal rim diameter(in) Nominal rim diameter(in)

Diagonal tyre construction code Diagonal tyre construction code

Nominal section width(in) Nominal section width(in)

Wide base industrial tyre Metric unit representing the size of the tyre
28 x 9 - 15 NHS 355 / 65 - 15 NHS
Not-highway service Not-highway service

Nominal rim diameter(in) Nominal rim diameter(in)

Diagonal tyre construction code Diagonal tyre construction code

Nominal section width(in) Nominal aspect ratio

Nominal tyre overall diameter(in) Nominal section width(mm)

2. Size Designation for the Pneumatic Tyre Rim Solid Tyres

Conventional section solid tyre Wide base solid tyre 1725 1270 1135 1090

7.00 - 12 / 5.0 27 x10-12 / 8.0          
h1+6  )            =
Nominal rim width(in) Nominal rim width(in)
         
Nominal rim diameter(in) Nominal rim diameter(in)

Nominal section width(in) Nominal section width(in)

Nominal tyre overall diameter(in)

Metric unit representing the size of the solid tyre
200 / 50 - 10 / 6.5

Nominal rim width(in)

Nominal rim diameter(in)

Nominal aspect ratio

Nominal section width(mm)

3. Size Designation for the Pressed-on Solid Tyres

Imperial unit representing the size of the solid tyre Metric unit representing the size of the solid tyre

28 x 12 x 22 425x 150x305
Nominal rim width(in) Nominal rim width(mm)

Nominal section width(in) Nominal section width(mm)

Nominal tyre overall diameter(in) Nominal tyre overall diameter(mm)

OB-502
2 3
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

MB-413 (Low rolling resistance IND tyres , Especially

applicable for the battery forklift ) LB-033 (Super grip,applicable for
multi-purpose)

Tyre Load Limits at Various Max.speed and Various Types of Equipment(kg) Tyre Load Limits at Various Max.speed and Various Types of Equipment(kg)
Design New Tyre Inflated Design New Tyre
Counterbalanced Lift Trucks Other’s Industrial Vehicles Inflated Counterbalanced Lift Trucks Other’s Industrial Vehicles
Tyre Size Ply Rating Tyre Type Standard Pressure Valves Tyre Size Ply Rating Tyre Type Standard Pressure Valves
Rim O.D. S.W. kPa Rim O.D. S.W.
mm mm kPa
DRIVER STEER DRIVER STEER mm mm DRIVER STEER DRIVER STEER


1+6  77 6            =
h1+6  77 5            =

   

MB-413        

1+6  77 *            =

 

   

MB-238 (Extra Deep Tread ,Special Service for the

airport baggage tractor)

Design New Tyre Max Load

Ply Tyre Standard Inflated
Tyre Size Valves
Rating Type Rim O.D. S.W. Pressure 25km/h
mm mm
10 TT 860 1515 
6.00-9NHS 4.00E-9 545 160 Z1-01-1
12 TT 1030 1685
10 TT 790 1725  
6.50-10NHS 5.00F-10 597 178 Z1-01-1
12 TT 970 1935

MB-238

LB-033

4 5
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

OB-501 L-2B
(Specially service under the not flat
(Skid Steer,off road forklift
ground and runway conditions in mining
and aerial work platform )
and industrial duty)
Design New Tyre Max Load
Design New Tyre Max Load Inflated
Standard Inflated Ply Tyre Standard kg
Tyre Size Ply Tyre Valves Tyre Size Pressure Valves
Rim O.D. S.W. Pressure 15km/h Rating Type Rim O.D. S.W.
kPa 10km/h
mm mm mm mm
5.70-12NHS 8 TL 4.50-I-70-12 570 146 620 835 TR13
6 TL 340 820
23×8.50-12NHS 8 TL 7.00-I-70-12 574 213 450 960 TR13CW
10 TL 550 1080
8 TL 410 1100
27×8.50-15NHS 7JA-15 660 216 TR15
10 TL 480 1200
8 TL 410 1880
10-16.5NHS 8.25-16.5 773 264 TR15CW
10 TL 520 2135
10 TL 450 2540
12-16.5NHS 9.75-16.5 831 307 TR15CW
12 TL 550 2865
L-2B
OB-501

L-2D (Skid steer tyres)

Design New Tyre Max Load

Inflated kg
Ply Tyre Standard
Tyre Size Pressure Valves
Rating Type Rim O.D. S.W. kPa 10km/h
mm mm
8 TL 410 1880

E-3 / L-3
10-16.5NHS 8.25-16.5 773 264 TR15CW
10 TL 520 2135
(Light-Duty OTR Tyres) 10 TL 450 2540
12-16.5NHS 9.75-16.5 831 307 TR15CW
12 TL 550 2865 L-2D

Design New Tyre Max Load

Ply Tyre Standard Inflated
Tyre Size Valves
Rating Type Rim O.D. S.W. Pressure 50km/h

L-2E
mm mm

7.50-16 10 TT 6.00G-16 810 215 420 920 Z1-01-3

8.25-16 10 TT 6.50H-16 855 235 350 1065 Z1-01-4
12.00-16 14 TT 6.50H-16 890 255 420 1540 Z1-01-4
E-3 14.00/90-16 14 TT 6.50H-16 890 280 350 2760 Z1-01-4 Max Load
Design New Tyre Inflated
Ply Tyre Standard kg
20.5/70-16 14 TT 10.00F-16 950 350 280 1600 Z1-01-4 Tyre Size Pressure Valves
Rating Type Rim O.D. S.W. 10km/h
mm mm kPa
6 TL 520 750

I-3D
5.70-12NHS 4.50-I-70-12 570 146 TR13
8 TL 620 835
(Good flotation tyres for industrial,agricultural,
forestry and construction service )
L-2E

Design New Tyre Inflated Max Load Max

Ply Tyre Standard Speed
Tyre Size Pressure
Rating Type Rim S.W. kg km/h
O.D. kPa
mm mm
26×12.00-12NHS 10 TL 10.50-1-70-12 648 307 450 1630 10
31×15.50-15NHS 12 TL 13.00-15 792 391 520 1680 30

I-3D

6 7
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

I-3F (Light off road forklift tyres) IND-3J (Applicable for 7.5-16 tons heavy-duty forklift )

Max Load Tyre Load Limits at Various Max.speed and Various Types of Equipment(kg)
Design New Tyre Design New Tyre Inflated
Inflated 25km/h Counterbalanced Lift Trucks Other’s Industrial Vehicles
Ply Tyre Standard Tyre Size Ply Rating Tyre Type Standard Pressure Valves
Tyre Size Pressure Valves
Rating Type Rim O.D. S.W. Drive Steer Rim O.D. S.W. kPa
kPa
mm mm kg kg mm mm DRIVER STEER DRIVER STEER
10.0/75-15.3 14 TL 9.00-15.3 780 264 550 2840 2400 / 1+6  77             =
11.5/80-15.3 14 TL 9.00-15.3 867 290 475 3500 2955 /          
1+6 77    =
         
1+6  77             =
1+6          
I-3F
77    =
         
1+6 77    =

E-2E
         

(Wheels loader tyres)

IND-3J

Design New Tyre Max Load

Inflated kg
Ply Tyre Standard

E-4J
Tyre Size Pressure Valves
Rating Type Rim O.D. S.W.
mm mm
kPa  (Reach stacker,container handler,over
  77      = 16 tons heavy-duty forklift)

E-2E Design New Tyre Inflated Pressure

 Max Load
Ply Tyre Standard
Tyre Size
Rating Type Rim O.D. S.W.
kPa 10km/h
mm mm

E-2M
12.00-24 20 TT 8.5 1275 315 825 6900
(Wheels loader tyres) 14.00-24
24 850 9500
TT/TL 10.00WA 1420 375
28 925 10000
16.00-25 36 TT/TL 11.25/2.0 1550 430 975 13600
Design New Tyre Max Load 18.00-25 40 TT/TL 13.00/2.5 1675 500 950 17000
Inflated
Tyre Size
Ply
Rating
Tyre
Type
Standard
Rim
Pressure
kg
Valves E-4J
O.D. S.W. kPa 
mm mm
1+6  77      =
E-2M

(Light multipurpose wheels excavators tyres)

E-2Y+ L589A
Tyre Load Limits at Various Max.speed and Various Types of Equipment(kg)
Max Load Design New Tyre Inflated
Design New Tyre Inflated Counterbalanced Lift Trucks Other’s Industrial Vehicles
Ply Tyre Standard kg Tyre Size Ply Rating Tyre Type Standard Pressure Valves
Tyre Size Pressure Valves
Rating Type Rim O.D. S.W. Rim O.D. S.W. kPa
kPa 
mm mm mm mm DRIVER STEER DRIVER STEER
  77 +     = 1+6  77             =
1+6  77             =
E-2Y+
L589A

8 9
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

L-6A PNEUMATIC TYRE RIM SOLID TYRES

Design New Tyre Max Load
Ply Tyre Standard Inflated
Tyre Size
Rating Type Rim O.D. S.W. Pressure
Valves • Good puncture and wear resistance. The solid tyre is one of low speeding and high
10km/h
mm mm
• Low rolling resistance and energy saving. loading industrial tyres and characterized by
33×12-16.5NHS 6 TL 9.75-16.5 831 307 450 2540 TR15CW
• Low heat build up and long operating life. its long operating life, good riding safety and
• Highly resilient tyre body and good riding comfort. wear, puncture and fatigue resistance and
• Low center of gravity and good riding safety. maintenance free property. Solid tyres are
• Tight fitting of tyre with rim. widely used for various industrial vehicles,
L-6A The British technology is used for all listed engineering machineries and the tows and
tyre sizes and the products’ features and trailers operating in harbors, airports, railway
characters conform with Chinese GB, American stations, factories, minings and various
TRA, European ETRTO and Japanese JATMA loading and unloading places.
standards.
The company can develop and manufacture
the standard tyre sizes which are not listed,

L-2H
non marking white(colored) solid tyres and non
standard tyre sizes according to customers’ specific
requirements.

Design New Tyre Max Load

Ply Tyre Standard Inflated
Tyre Size Valves
Rating Type Rim O.D. S.W. Pressure
10km/h
mm mm

23×8.50-12NHS 6 TL 7.00-I-70-12 574 213 340 820 TR13CW wear resistant tread compound
28×9-15NHS 6 TL 7.0-15 706 221 400 1100 TR13CW
10-16.5NHS 6 TL 8.25-16.5 773 264 310 1590 TR15CW
resilient center compound

L-2H super base compound

high tensile creel beads

Standard

Solid Profile

Easi-Fit

10 11
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

OB-502 K3
(Deeper rock tread,Rim Guard Design,
Standard configuration for the diesel (Low Rolling Resistance,diesel forklift)
forklift)
Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg) Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Design New Tyre Design New Tyre
Counterbalanced Lift Trucks Other's Industrial Vehicles Counterbalanced Lift Trucks Other's Industrial Vehicles
Tyre Size Standard Rim Tyre Size Standard Rim
O.D. S.W. O.D. S.W.
mm mm Drive Steer mm mm Drive Steer
 &       

 


,
 (         (  
 )  
 6       

 
 
 )
 *
       K3
 +       
OB-502
 
        



 
 
 
      
      
      
      
 (       
 )       
 *       
      

               
        
      
       

L-077 (Solid OTR tyres)

MIL (Applicable for the semi-trailer on port)

Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Design New Tyre Max Load kg Design New Tyre
Tyre Size Standard Rim Counterbalanced Lift Trucks Other's Industrial Vehicles
O.D. S.W. Tyre Size Standard Rim
NPK NPK Vehicles O.D. S.W.
mm mm
mm mm Drive Steer
    ? ?    ? Trailer,Heavy-duty Truck for mining
       Trailer,Heavy-duty Truck for mining
    ? ?    ? Trailer,Heavy-duty Truck for mining
    ? ?   ? ? 25 tons heavy-duty forklift
    ? ? ?  ?  Wheel Loader
    ? ? ?  ?  Wheel Loader
L-077     ? ? ?  ?  Wheel Loader
    ? ? ?  ?  Wheel Loader
        ? ? RTG MIL
        ? ? RTG

12 13
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

OB-503 (Special designed cost-effective for

standard load vehicles) PREMIA (Embedded each other tread
designed, good performance )
Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Design New Tyre Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Counterbalanced Lift Trucks Other's Industrial Vehicles Design New Tyre
Tyre Size Standard Rim Counterbalanced Lift Trucks Other's Industrial Vehicles
O.D. S.W. Tyre Size Standard Rim
mm mm Drive Steer O.D. S.W.
mm mm Drive Steer

OB-503 PREMIA



BLK (Applicable for the semi-trailer on

port and steel plant)
OB-501 (Non-Marking tyres, Specially
service for low frequency vehicles)
Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Design New Tyre
Counterbalanced Lift Trucks Other's Industrial Vehicles
Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg) Tyre Size Standard Rim
Design New Tyre O.D. S.W.
Counterbalanced Lift Trucks Other's Industrial Vehicles
Tyre Size Standard Rim mm mm Drive Steer
O.D. S.W.
mm mm Drive Steer

BLK         
        
        

PL (Bridge-erecting crane) OB-501

Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Design New Tyre










Standard Counterbalanced Lift Trucks Other’s Industrial Vehicles
Tyre Size
Rim O.D. S.W. 25km/h 6km/h
mm mm Drive Steer
12.00-20/10.0 10.0-20 1084 327 - - 10000 - -

PL 18/70-29/14.0 14.0-29 1360 457 - - 17500 - -

14 15
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

RIB (Special Service for baggage tractor on

airport, harbor and station)
PRESSED-ON BAND SOLID TYRES
Design New Tyre
Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Counterbalanced Lift Trucks Other's Industrial Vehicles
Super wear resistance Supper durability
Tyre Size Standard Rim
O.D. S.W.
mm mm Drive Steer
4.00-8/3.00 3.00D-8 407 101 950 730 950 860 730
4.00-8/3.75 3.75I-8 406 113 950 730 950 860 730 Press-on Band Tyres
15x4.5-8/3.00 3.00D-8
371 103 1040 800 1040 945 800 A Press-on tyre is made of rubber bonded to a mild steel band which is
15x4.5-8/3.25 3.25I-8
pressed as an interfernce fit onto a wheel. the steel band is a mild steel
strip which is rolled, welded and expanded in-house by Watts wheel
RIB division. Adhesion between the steel band and the rubber is achieved
by applying special adhesives. GTC is a world leader in Press On Band
technology offering an extensive range of styles and tread pattern options.
Particular design emphasis is placed on producing tyres with a large
footprint area. Square profile, low heat build up and low rolling resistance.

PL
Features and Benefits
• Punctre proof
• High load capacity
Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg) • Square tread profile ensuring good stability
Design New Tyre
Tyre Size Standard Rim
Counterbalanced Lift Trucks Other's Industrial Vehicles • Low rolling resistance at no extra premium reducing energy/fuel
O.D. S.W.
mm mm Drive Steer
consumption
18x9-8/7.0 7.0-8 455 209 2470 1900 2470 2245 1900

Applications
PL Applicable to various forklifts and lifting vehicles which are widely used in
airports, entertainment places, coal minings, construction sites, container
loading places, factories and enterprises, foodstuff/beverage factories,
cast plants, glass manufacturers, garbage disposal plants, freight
transport and handling, army units, harbors, scrap recycling stations, iron
and steel works, timber processing plants and warehouses, etc.

SSS (Skid Steer, off road forklift and

aerial work platform tyres)
Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Design New Tyre 
Counterbalanced Lift Trucks Other's Industrial Vehicles
Tyre Size Standard Rim
O.D. S.W.
mm mm Drive Steer
31ġ10-20/7.5 7.5-20 790 252 - - - - 2740
33ġ12-20/7.5 7.5-20 832 287 - - - - 3245

SSS

16 17
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

SM/TR CURED-ON SOLID TYRES

CA-141
Tyre Load Limits at Various Max. speed and Various Types of Equipment (kg)
Pattern
Counterbalanced Lift Trucks Other's Industrial Vehicles
(Aerial work platform , Post type
Tyre Size
10km/h 16km/h 25km/h elevator tyres)
SM TR 6km/h 10km/h 16km/h 25km/h
Drive Steer Drive Steer Drive Steer
9×5-5 ★ 955 785 855 720 695 570 1025 750 685 515 Size Design New Tyre Tire Load Limits at Various Max. speed (kg)
10x4-6.5 ★ 775 635 690 580 560 460 830 610 555 415 
10x5-6.5 ★ 1010 830 905 760 735 600 1085 795 720 540
Metric unit Imperial unit O.D. S.W. Static 5km/h 10km/h
10.5x5-6.5 ★ 1075 880 960 805 780 640 1150 845 765 575 mm mm
12x5-8 ★ 1185 975 1060 890 860 705 1270 935 850 635
13x4.5-8 ★ 1120 920 1000 840 815 670 1200 880 800 600 323x100 13x4 323 100 1345 955 700
13.5x5.5-8 ★ 1505 1235 1345 1130 1095 895 1615 1185 1075 805 406x125 16x5 406 125 2015 1430 1050
14x4.5 ★ ★ 1170 960 1045 875 850 595 1255 920 835 625
15x5-11.25 ★ ★ 1390 1140 1240 1040 1010 825 1490 1090 990 745
15x6-11.25 ★ ★ 1720 1410 1535 1290 1250 1025 1840 1350 1230 920
15x8-11.25 ★ 2385 1960 2130 1785 1730 1420 2555 1870 1700 1275
16.25x5-11.25 ★ ★ 1525 1250 1360 1140 1105 905 1630 1195 1090 815
16.25x6-11.25 ★ ★ 1920 1575 1710 1440 1390 1140 2055 1505 1370 1025
16.25x7-11.25 ★ ★ 2310 1900 2065 1735 1680 1375 2475 1815 1650 1240 CA-141
16x5-10.5 ★ ★ 1510 1240 1345 1130 1095 895 1615 1185 1075 810
16x6-10.5 ★ ★ 1910 1570 1705 1435 1390 1140 2050 1500 1365 1025
16x7-10.5 ★ ★ 2315 1905 2070 1740 1680 1380 2480 1820 1655 1240
18x5-12.125 ★ ★ 1645 1350 1465 1230 1195 980 1760 1290 1175 880
18x6-12.125 ★ ★ 2095 1720 1870 1570 1520 1250 2245 1645 1495 1125
18x7-12.125 ★ ★ 2550 2095 2275 1910 1850 1520 2730 2005 1820 1365
18x8-12.125 ★ ★ 3005 2465 2680 2250 2180 2145 3215 2360 2145 1610
18x9-12.125 ★ ★ 3455 2840 3085 2590 2510 2470 3705 2715 2470 1850
21x7-15 ★ ★ 2870 2355 2560 2150 2085 1705 3075 2255 2050 1535
21x8-15 3380 2775 2655 2415 1810

OB-501A
★ ★ 3020 2535 2455 2010 3620
21x9-15 ★ ★ 3895 3200 3475 2920 2825 2315 4170 3060 2780 2085
22x10-16 ★ 4560 3750 4075 3420 3315 2715 4890 3585 3260 2445 (Aerial work platform , Post type
22x12-16 ★ ★ 5625 4620 5020 4220 4085 3350 6025 4420 4015 3015 elevator tyres)
22x14-16 ★ ★ 6685 5490 5970 5015 4855 3980 7165 5255 4775 3580
22x16-16 ★ 7750 6365 6920 5810 5625 4610 8300 6090 5535 4150
22x8-16 ★ ★ 3500 2875 3125 2625 2540 2085 3750 2750 2500 1875 Size Design New Tyre Tire Load Limits at Various Max. speed (kg)
22x9-16 ★ ★ 4030 3310 3600 3025 2930 2400 4320 3170 2880 2445 
28x10-22 ★ 5465 4490 4880 4100 3970 3255 5860 4295 3905 2930 O.D. S.W.
Metric unit Imperial unit Static 5km/h 10km/h
28x12-22 ★ 6740 5535 6015 5055 4895 4010 7220 5295 4815 3610 mm mm
28x14-22 ★ 8010 6580 7155 6010 5820 4770 8585 6295 5725 4290
/ 15x5G 492 238 2726 2561 23:6
28x16-22 ★ 9285 7625 8290 6965 6740 5525 9950 7295 6630 4975
36x12-30 ★ 8135 6685 7265 6105 5910 4845 8720 6395 5810 4360 / 15x5H 492 238 2726 2561 23:6
40x16-30 ★ 12425 10170 10815 8875 8555 7100 12910 9200 8070 6455
250x105-170 780 640 700 585 570 465 840 615 560 420
OB-501A
★
330x145-180 ★ 1540 1265 1375 1155 1120 920 1650 1540 1100 825
330x145-190 ★ 1535 1265 1375 1155 1115 915 1645 1535 1100 825
405x130-305 ★ 1520 1250 1355 1140 1105 905 1625 1520 1085 825
405x220-305 ★ 2760 2265 2465 2070 2005 1640 2955 2170 1970 1480
405x260-305 ★ 3355 2755 2995 2515 2435 2000 3595 3355 2395 1800
425x200-305 ★ 2685 2205 2395 2015 1950 1600 2875 2110 1920 1440
450x300-305 ★ 4645 3815 4145 3480 3370 2765 4975 3650 3315 2485
550x160-410 ★ 2550 2095 2280 1915 1855 1520 2735 2005 1825 1365
540x200-410 ★ 3265 2680 2915 2450 2370 1945 3495 2565 2330 1750
645x250-410 ★ 4805 3935 4185 3435 3310 2745 4995 3560 3120 2495
645x300-410 ★ 6060 4955 5270 4330 4170 3460 6295 4485 3935 3145
660x250-480 ★ 4610 3925 4175 3425 3300 2740 5170 4795 3115 2490

SM TR
18 19
Effective May 2015 2015 Advance Industrial Tyres Data Book Effective May 2015 2015 Advance Industrial Tyres Data Book

FLATPROOF TYRES ASSEMBLY DIAGRAM FOR THE PNEUMATIC

TYRE RIM SOLID TYRES
The Structure of flatproof tyres Performance of Flatproof tyres

Even if tyres are driving in the most abominable Assembly diagram for the Easi-Fit solid tyres
Uniformly Dispersing and dangerous conditions,the vehicles equipped WARNING:
Loadings
with flatproof tyres can roll over acute-objects such Do not use grease type material during
the course of mounting solid tyres, due to
Improving the Capability as scrap irons nails,rocks etc.Indeed the tyres even this type of material will result in irregular
of driving
when shot by automatic rifle AK47 also can move failure. Suggest applying diluted soap
Tight fitting of tyre and rim on. water inside of tyre and rim.

Invariable Pressure

Improving the Capability

of traction

Assembly diagram for the standard solid tyres on the split rim
● Vehicles of Military Forces
● Vehicles for Other Special Applications
● Vehicles of Mining Industry

Features of Flatproof Tyres

● Avoiding the danger of lost control because of ● Driving comfortablely-decreasing the tyredness of driving
sudden tyre flat.
Safety and improving the efficiently of driving.
● Stable driving in the conditions of tough
● Characterized by excellent damping property-preventing
road and overload.
● Enhancing the vehicle’s stability which equipment from injure by shaking
Assembly diagram for the standard solid tyres on the multi-sets rim
enables to remain. moving even if the tyre flat.
● Stable driving property-supporting greater load improving
● Increasing the Performance life by one to
stability, increasing traction.
two times as.compared with pneumatic tyres.
Economical ● Improving the efficiency. ● Avoiding the risk of air leak and blowing out.
● Decreasing Largely the maintenance cost.
● Wider contact area,chara cterized by big traction in soft
● Prolonged performance life due to excellent and muddy road service.
Excellent heart resistance.
Capabiliey ● Best quality assurance.
● Good endurance,all-weateher property,unaffected by
extreme temperature.
● All of the pneumatic tyres can be changed to the
run flat tyres ● Reducing cost in maintenance-reducing tyre rupture and
Universality
● Tyres design according to the client’s request expansion of blot hole,driving comfortably,as pneumatic
● Flatproof tyres of“ADVANCE”brand in confor
mity with Chinese Standard,TRA,ETRTO and tyre hardness value 8
JATMA. ● Economical-Saving cost in maintenance and downtime.

20