IP117, IP117A

IP317, IP317A
LM117, LM117A

1.5 AMP
POSITIVE ADJUSTABLE
1 2 3 1 2 3
VOLTAGE REGULATOR
FOR HI-REL APPLICATIONS
Pin 1 – ADJ. Pin 1 – ADJ.
FEATURES
Pin 2 – VOUT Pin 2 – VOUT • Output voltage range of:
Pin 3 – VIN Pin 3 – VIN
Case – VOUT Case – Isolated 1.25 to 40V for standard version
G Package – TO257 IG Package – TO257 1.25 to 60V for HV version
• Output voltage tolerance 1%
 !
 !
• Load regulation 0.3%
• Line regulation 0.01%/V
• Complete series of protections:
current limiting
Pin 1 – ADJ. Pin 1 – ADJ.
thermal shutdown
Pin 2 – VOUT Pin 2 – VOUT
Pin 3 – VIN Pin 3 – VIN soa control
SMD1 SMD05
CERAMIC SURFACE CERAMIC SURFACE
• Also available in TO220 metal
MOUNT MOUNT isolated package (1mm pins)

1 2 1 2 3
1 2

Pin 1 – ADJ. Pin 1 – ADJ. Pin 1 – ADJ.

Pin 2 – VIN Pin 2 – VIN Pin 2 – VOUT
Case – VOUT Case – VOUT Pin 3 – VIN
K Package – TO3 R Package – TO66 T Package – TO220 Plastic

ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)

VI–O Input - Output Differential Voltage – Standard 40V
– HV Series 60V
IO Output Current Internally limited
PD Power Dissipation Internally limited
TJ Operating Junction Temperature Range See Table Above
TSTG Storage Temperature –65 to 150°C

Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Prelim. 8/00
E-mail: [email protected] Website: http://www.semelab.co.uk
 IP117, IP117A
IP317, IP317A
LM117, LM117A

IP117A , IP117AHV IP117 , IP117HV

LM117A , LM117AHV LM117 , LM117HV
Parameter Test Conditions Min. Typ. Max. Min. Typ. Max. Units
IOUT = 10mA 1.238 1.25 1.262 V
VREF Reference Voltage IOUT = 10mA to IMAX
VIN – VOUT = 3V to VMAX 1.225 1.250 1.270 1.200 1.250 1.300 V
P £ PMAX TJ = –55 to +150°C
DVOUT VIN – VOUT = 3V to VMAX 0.005 0.010 0.010 0.020
Line Regulation 1 %/V
DVIN TJ = –55 to +150°C 0.010 0.020 0.020 0.050
IOUT = 10mA to IMAX VOUT £ 5V 5 15 5 15 mV
DVOUT VOUT ³ 5V 0.1 0.3 0.1 0.3 %
Load Regulation 1
DIOUT IOUT = 10mA to IMAX VOUT £ 5V 15 50 20 50 mV
TJ = –55 to +150°C VOUT ³ 5V 0.3 1 0.3 1 %
Thermal Regulation tp = 20ms 0.002 0.020 0.030 0.070 %/W
CADJ = 0 65 65 dB
VOUT = 10V
Ripple Rejection CADJ = 10mF
f = 120Hz 66 80 66 80 dB
TJ = –55 to +150°C
IADJ Adjust Pin Current TJ = –55 to +150°C 50 100 50 100 mA
IOUT = 10mA to IMAX
DIADJ Adjust Pin Current
TJ = –55 to +150°C 0.2 5 0.2 5 mA
Change
VIN – VOUT = 2.5V to VMAX
VIN – VOUT = 40V
3.5 5 3.5 5
IMIN Minimum Load TJ = –55 to +150°C
mA
Current VIN – VOUT = 60V (HV SERIES)
3.5 7 3.5 7
TJ = –55 to +150°C
VIN – VOUT £ 15V
1.5 2.2 1.5 2.2 A
TJ = –55 to +150°C
ICL Current Limit
VIN – VOUT = 40V 0.30 0.50 0.30 0.50
A
VIN – VOUT = 60V (HV SERIES) 0.10 0.10
DVOUT Temperature
TJ = –55 to +150°C 1 2 1 %
DTEMP Stability
DVOUT
Long Term Stability TA = +125°C t = 1000 Hrs 0.3 1 0.3 1 %
DTIME
en RMS Output Noise
f = 10 Hz to 10 kHz 0.001 0.001 %
(% of VOUT)
K Package 2.3 3 2.3 3
RqJC Thermal Resistance
R Package 5 7 5 7 °C/W
Junction to Case
G, IG Packages 3 5 3 5
1) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects
are covered under thermal regulation specifications. Load regulation is measured from the bottom of the package for the TO–3 and TO–66 pack-
ages, at the junction of the wide and narrow portion of the output lead for the TO–220 package, and 1/8” below the base of the package on the out-
put pin of the TO–257 package.

2) Test Conditions unless othewise stated: VIN – VOUT = 5V , TJ = 25°C , IOUT = 0.5A , IMAX = 1.5A.
PMAX = 10W for SMD1, 20W for all other package styles.
VMAX = 40V for standard series , 60V for HV series.
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Prelim. 8/00
E-mail: [email protected] Website: http://www.semelab.co.uk
 IP117, IP117A
IP317, IP317A
LM117, LM117A

IP317A IP317
IP317AHV IP317HV
Parameter Test Conditions Min. Typ. Max. Min. Typ. Max. Units
IOUT = 10mA 1.238 1.25 1.262 V
IOUT = 10mA to IMAX
VREF Reference Voltage
VIN – VOUT = 3V to VMAX 1.225 1.25 1.270 1.200 1.250 1.300 V
P £ PMAX TJ = 0 to 125°C
DVOUT VIN – VOUT = 3V to VMAX 0.005 0.010 0.010 0.040
Line Regulation 1 %/V
DVIN TJ = 0 to 125°C 0.010 0.020 0.020 0.070
IOUT = 10mA to IMAX VOUT £ 5V 5 25 5 25 mV
DVOUT VOUT ³ 5V 0.1 0.5 0.1 0.5 %
Load Regulation 1
DIOUT IOUT = 10mA to IMAX VOUT £ 5V 15 50 20 70 mV
TJ = –55 to +150°C VOUT ³ 5V 0.3 1 0.3 1.5 %
Thermal Regulation tp = 20ms 0.002 0.020 0.030 0.070 %/W
CADJ = 0 65 65 dB
VOUT = 10V
Ripple Rejection CADJ = 10mF
f = 120Hz 66 80 66 80 dB
TJ = 0 to 125°C
IADJ Adjust Pin Current TJ = 0 to 125°C 50 100 50 100 mA
IOUT = 10mA to IMAX
DIADJ Adjust Pin Current
TJ = 0 to 125°C 0.2 5 0.2 5 mA
Change
VIN – VOUT = 2.5V to VMAX
VIN – VOUT = 40V
3.5 10 3.5 10
IMIN Minimum Load TJ = 0 to 125°C
mA
Current VIN – VOUT = 60V (HV SERIES)
3.5 12 3.5 12
TJ = 0 to 125°C
VIN – VOUT £ 15V
1.5 2.2 1.5 2.2 A
TJ = 0 to 125°C
ICL Current Limit
VIN – VOUT = 40V 0.15 0.40 0.15 0.40
A
VIN – VOUT = 60V (HV SERIES) 0.10 0.10
DVOUT Temperature
TJ = 0 to 125°C 1 2 1 %
DTEMP Stability
DVOUT
Long Term Stability t = 1000 Hrs 0.3 1 0.3 1 %
DTIME
en RMS Output Noise
f = 10 Hz to 10 kHz 0.003 0.003 %
(% of VOUT)
RqJC Thermal Resistance K Package 2.3 3 2.3 3
°C/W
Junction to Case T Package 4 5 5 7

1) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects
are covered under thermal regulation specifications. Load regulation is measured from the bottom of the package for the TO–3 and TO–66 pack-
ages, at the junction of the wide and narrow portion of the output lead for the TO–220 package, and 1/8” below the base of the package on the out-
put pin of the TO–257 package.

2) Test Conditions unless othewise stated: VIN – VOUT = 5V , TJ = 25°C , IOUT = 0.5A , PMAX = 20W , IMAX = 1.5A
VMAX = 40V for standard series , 60V for HV series.

Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Prelim. 8/00
E-mail: [email protected] Website: http://www.semelab.co.uk
 IP117, IP117A
IP317, IP317A
LM117, LM117A

APPLICATIONS INFORMATION
IP317A IP 317A
R P (Max Drop 300mV) OUTPUT
VIN VIN VO U T VIN VIN VO U T 5V
VO U T
ADJ ADJ
121Ω
VIN 1µF
7
2
25 Ω 6
LM301A 1k Ω
1 3 RL 1kΩ
121 Ω 8 TTL 2N3904
383Ω
4
5µF
1kΩ

383 Ω
25 Ω RETURN

RETURN

Remote Sensing 5V Regulator with Shut Down

IP317A IP317A

+24V VIN VO U T VIN VIN VO U T

To VPP 5V

ADJ 249 Ω ADJ R1

1µF 1% 1µF 121 Ω

750 Ω R2 C1
1% 383 Ω 10 µF

READ 3.24k Ω C1 improves ripple rejection.

39k Ω
1% XC should be small compared to R2.
WRITE Improving Ripple Rejection
To OE

BYTE ERASE 18k Ω IP317A

VIN 1N4001 VIN VO U T

CHIP ERASE 100k Ω All gates 7406.
ADJ
243 Ω
10k Ω
OE VPP 50 Ω
THERMALLY
READ 0V 5V COUPLE
2N3906 12V
WRITE
BYTE 5V 21V 20k Ω

CHIP ERASE 12V 21V

50k Ω
2816 EEPROM Supply Programmer for
Read/Write Control Temperature Compensated
Lead–Acid Battery Charger
Order Information
IG–Pack
Part G–Pack K–Pack R–Pack T–Pack Temp.
Number (TO257) SMD1 SMD05 (TO3) (TO66) (TO220) Range
LM117 ✔ ✔ ✔ ✔ ✔ -55 to +150°C Note:
LM117HV ✔ ✔ ✔ ✔ ✔ ”
LM117A ✔ ✔ ✔ ✔ ✔ ” To order, add the package
LM117AHV ✔ ✔ ✔ ✔ ✔ ” identifier to the part number.
IP117 ✔ ✔ ✔ ✔ ✔ -55 to +150°C eg. IP117AHVK
IP117HV ✔ ✔ ✔ ✔ ✔ ” IP1175SMD05
IP117A ✔ ✔ ✔ ✔ ✔ ” IP317T
IP117AHV ✔ ✔ ✔ ✔ ✔ ”
LM317 ✔ ✔ 0 to 125°C
LM317HV ✔ ✔ ”
IP317 ✔ ✔ ”
IP317HV ✔ ✔ ”
IP317A ✔ ✔ ”
IP317AHV ✔ ✔ ”

Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Prelim. 8/00
E-mail: [email protected] Website: http://www.semelab.co.uk
This datasheet has been downloaded from:

www.DatasheetCatalog.com

Datasheets for electronic components.