CURRICULUM/SYLLABUS

This program is aimed at training candidates for the job of a “Electrician Domestic", in the “Electrical (Under
MODULAR EMPLOYABLE SKILLS (MES))” Sector/Industry and aims at building the following key competencies
amongst the learner:

1. To know how to carry out basic electrician 5.To know about earthing and all the related
services processes
2. To know how to repair wiring 6. Soft skills required for the job
3. To know how to fix home appliances 7.
4. To know how to carry out EC and CFL assembly 8.

This course encompasses 5 out of 5 National Occupational Standards (NOS) of “Electrician Domestic
(ELERN14101)” Qualification Pack issued by “Electrical (Under MODULAR EMPLOYABLE SKILLS
(MES)””.

S. Topic/Module Duration Key Learning Outcomes Corresponding

No (in Hours) NOS Code

1 Basic Electrical 120 1. To know and understand about the Training Additional
provider and the trainer Topics
2. To know about each other and the scope of
the job role
3. To understand the SWOT analysis

4. Fires in electrical Circuits & Precautions

5. Fire Extinguishers & its Types ELE101
6. General Safety of Tools & equipment
7. Rescue of person who is in contact with
live wire
8. Treat a person for electric shock/ injury

Practical Competencies:

9. Fire Fighting
10. Safely handling Tools &Equipment
11. Use of proper Tools &equipment& its
maintenance
12. Rescue of person who is in contact with
live wire
13. Treat a person for electric shock/ injury

Page | 1
 14. Concept of basic Electricity, Single phase
& three phase circuits
15. Electrical terms like Voltage, Currents,
Resistance, Impedance & power factor

Practical Competencies:

16. Simple electrical Connections using

resistance, voltmeter, ammeter & multi-
meter.
17. Practice on simple three phase circuit

2 EC & CFL Assembly 120 1. Familiarization with electronic ELE204

components like Capacitor, Choke coil,
Diode, Transistor, Thyristor

Practical Competencies:

2. Using electronic components in basic

Electrical circuits
3. Electronic choke & CFL assembly

4. Studies of diagram & Symbols used in

basic Electrical Circuits, Wiring &
installations. Colour Code of carbon
Resistors
5. IE rules for General Electricity

Practical Competencies:

6. Identifying accessories/ symbols as per

symbols
7. Making plan of wiring and marking light,
power and other points accordingly.
8. Practicing the colour coded resistor value,
verifying with multimeter.

Page | 2
 9. Series & Parallel Circuits
10. Direct current & Polarity testing
11. Alternating Current & identifying
phase neutral and earth terminals
12. Interpret the components as per
circuits and laying components on
PCB
13. Testing of assembled PCB

Practical Competencies:

14. Connecting number of lamps in series

and parallel circuits
15. Testing DC supply polarity
16. Identifying phase, neutral and
earthing in three phase supply
17. Laying components as per layout &
soldering on PCB
18. Trouble shooting of assembled circuit

19. Concept of earthing, purpose & types

20. Pipe earthing & Plate earthing
21. Earthing of domestic installation

Practical Competencies:

22. Carry out pipe earthing & plate

earthing
23. Carry out domestic installation testing
for earthing

3 House Wiring 120 1. Conductors, Insulators & its types ELE203

2. Crimping & Crimping Tools, Soldering
3. Joints in Electrical Conductor
4. Concept of gauge of wire, conductor
material & its current carrying capacity
5. Determination of Fuse size according to
the load of circuit and its location
6. Study of different components used in
house wiring.
7. Use of Megger & Test lamps in fault
location

Page | 3
 8. Energy meter installation
9. Concept of different types of switchgears
used in general Electrical installations.

Practical Competencies:

10. Skinning different types of cable ends

11. Making various joints like twist joint,
married joint, Tee joint in stranded
conductors
12. Prepare T.W. Board for fixing Flush type
accessories
13. Make the wiring layout for a bedroom
with light, fan & Power points
14. Carryout the wiring such as cleat, conduit,
PVC casing and capping & concealed as
per layout.
15. Assembly & installation of single & twin
fluorescent lamp, Use of two way
switches.
16. Wiring in two way or three way systems
as prescribed and makes electrical
connections through plugs and switches
to different points.
17. Determine the number of lamps to be
connected in series for particular supply
voltage for making decorative serial lamp
18. Erection of switch boards & fixing of
switch box casings cleats, conduit ceiling
roses, switches etc.
19. Testing of electrical installations
&equipment and locating faults using
Megger, Test lamps & its removal.
20. Prepare & mount Energy meter board
21. Dismantling and assembling of
switchgears in simple electrical
installations

4 Home Appliances 120 1. Voltage and Power requirement of all ELE202

kinds of home appliances
2. Basic construction and assembly of
electric iron, heater and fan
3. Basic construction and assembly of mixer,
grinder, blender and OTG

Page | 4
 4. Basic construction and electrical parts of
washing machine, microwave oven,
refrigerator and dish washer
5. Repair and service technique of home
appliances

Practical Competencies:

6. Clean lubricate and replace bearing of

ceiling fan
7. Test and replace capacitor and regulator
of ceiling fan
8. Check and repair oscillator mechanism of
table fan
9. Check and replace thermostat of electric
iron and geyser
10. Dismantle and reassemble mixer and
grinder
11. Check and replace thermostat and relay
of refrigerator
12. Check water pump, timer and switches of
washing machine
13. Check the internal connections and
identify the fault in microwave oven

5 Battery 60 1. Types/rating of batteries and their ELE209

Maintenance application in inverter and UPS
2. Construction and parts of lead acid/
maintenance free battery. Specific gravity
of battery
3. Process of discharging and recharging of
battery
4. Battery chargers and precaution to be
taken while charging

Practical Competencies:

5. Preparation of electrolyte
6. Preparation of cells and their
arrangement
7. Prepare terminals by using anti corrosive
agent
8. Check specific gravity of lead acid battery

Page | 5
 9. Check and note change in specific gravity
while charging the battery

6 Special Modules 60 1. English 6 sets Additional

2. Soft Skills and ICHANGE 6 sets Modules

Total Programme Duration: 600 Hours

(This syllabus/ curriculum has been approved by _ Electrical (Under MODULAR EMPLOYABLE SKILLS (MES) _
(name of relevant Sector Skill Council or NSDC designated authority).

Page | 6