Scribd
Upload
24 views1 page

Calculation With The Minimum Required Assembly Preload, Tightening Factor: 1.00

This document contains calculations for mounting pretension forces, equivalent stresses, tightening torques, surface pressures, and permissible limits for bolted connections using various tightening factors. It calculates values for minimum and maximum required assembly preloads and ensures equivalent stresses and surface pressures do not exceed permissible limits to avoid exceeding the yield point.

Uploaded by

Andres Elias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views1 page

Calculation With The Minimum Required Assembly Preload, Tightening Factor: 1.00

This document contains calculations for mounting pretension forces, equivalent stresses, tightening torques, surface pressures, and permissible limits for bolted connections using various tightening factors. It calculates values for minimum and maximum required assembly preloads and ensures equivalent stresses and surface pressures do not exceed permissible limits to avoid exceeding the yield point.

Uploaded by

Andres Elias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

(utilization of yield strength (%) [%Re] 100.

00)
(differs from VDI 2230)
Mounting-Pretension force (N) [FM] 86375.53
Pretension force (N) [FV] 81919.99
Additional clamping force (reserve) (N) [FKres] 69123.62
Equivalent stress (N/mm²) [σred.M] 600.00
Equivalent stress (N/mm²) [σred.B] 573.47
Tightening torque (Nm) [MA] 188.10
Loose torque (Nm) [ML] 125.55
Tightening torque (nut) (Nm) [MAM] 187.67
Surface pressure
(below screw head) (N/mm²) [pK] 571.28
(below washer) (N/mm²) [p] 407.70
(below nut) (N/mm²) [pM] 551.12

Calculation with the minimum required assembly preload, tightening factor: 1.00
Mounting-Pretension force (N) [FMmin] 4455.54
Equivalent stress (N/mm²) [σred.M_FMmin] 30.95
Equivalent stress (N/mm²) [σred.B_FMmin] 29.58
Tightening torque (Nm) [MA_FMmin] 9.70
Loose torque (Nm) [ML_FMmin] 0.00
Tightening torque (nut) (Nm) [MAM_FMmin] 9.68
Surface pressure
(below screw head) (N/mm²) [pK_FMmin] 29.47
(below washer) (N/mm²) [p] 21.03
(below nut) (N/mm²) [pM_FMmin] 28.43

Calculation with the maximum required assembly preload with tightening factor: 1.17
Mounting-Pretension force (N) [FMmax] 5230.41
Additional clamping force (reserve) (N) [FKres] 69123.62
Equivalent stress (N/mm²) [σred.M_FMmax] 36.33
Equivalent stress (N/mm²) [σred.B_FMmax] 34.73
Tightening torque (Nm) [MA_FMmax] 11.39
Loose torque (Nm) [ML_FMmax] 1.19
Tightening torque (nut) (Nm) [MAM_FMmax] 11.36
Surface pressure
(below screw head) (N/mm²) [pK_FMmax] 34.59
(below washer) (N/mm²) [p] 24.69
(below nut) (N/mm²) [pM_FMmax] 33.37

Permissible equivalent stress (N/mm²) [σ.Mzul] 600.00


Permissible equivalent stress (N/mm²) [σ.Bzul] 600.00
Support area
(below screw head) (mm²) [ApK] 151.20
(below washer) (mm²) [Ap] 211.86
(below nut) (mm²) [ApM] 156.73
Permissible surface pressure
(below screw head) (N/mm²) [pKzul] 1250
(below washer) (N/mm²) [pzul] 770.00
(below nut) (N/mm²) [pMzul] 770

SUMMARY:

The yield point must not be exceeded.

Calculation with the maximum required assembly preload with tightening factor: 1.17

4/5

You might also like