Scribd
Upload
153 views

Z-5 Series Running Tool

The Z-5 series running tool is used to install Camco Z-5 collar locks into tubing strings. It consists of a fishing neck, upper adapter, inner mandrel, ratchet assembly, running prong, and skirt housing attached to the collar lock with shear pins. Upward jarring sets the lock into the tubing, causing the ratchet to engage and prevent unsetting, while further jarring releases the running tool from the installed lock.

Uploaded by

azze bouz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
153 views

Z-5 Series Running Tool

The Z-5 series running tool is used to install Camco Z-5 collar locks into tubing strings. It consists of a fishing neck, upper adapter, inner mandrel, ratchet assembly, running prong, and skirt housing attached to the collar lock with shear pins. Upward jarring sets the lock into the tubing, causing the ratchet to engage and prevent unsetting, while further jarring releases the running tool from the installed lock.

Uploaded by

azze bouz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Wireline Operations - Running Tools

Camco - Z-5 Series Running Tool


Camco Z-5 series running tools are wireline service

Down Hole Tools


tools that are used to install Camco Z-5 collar locks
in collar recesses in the tubing string.

The Z-5 series running tool consists of a fishing neck


with a threaded pin connection on the upper end, an
upper adapter, an inner mandrel, a ratchet assembly,
a running prong and a skirt housing on the lower end
which is attached to the appropriate collar lock with
shear pins.

The running prong, which is used to set the lock, is


also attached to the collar lock's inner sleeve with
shear pins. Upward jarring will set the collar lock,
causing the ratchet to capture the inner mandrel and
running prong assembly so that downward motion
cannot unset the lock. Continued upward jarring will
subsequently release the prong and the skirt housing
from the collar lock.

Wireline Operations - Running Tools


Z-5 Series
Running Tool

Engineering Data
Prong Fishing
Maximum Connecting Connecting Neck Shear Pin
Nominal Assembly No-Go Thread Thread O.D. Pulling Diameter Length
Size Number (in.) (Pin) (Box) (in.) Tool* (in.) (in.)
1 1/2 15042 1.445 15/16" -10 N/A 1.187 15166 1/8 13.516
2 15044 1.750 15/16" -10 1/2" - 13 1.375 15168 3/16 15.046
2 1/2 15045 2.125 15/16" -10 1/2" - 13 1.375 15168 3/16 15.593
3 15046 2.687 15/16" -10 1/2" - 13 1.375 15168 3/16 16.968
3 1/2 15047 2.698 15/16" -10 1/2" - 13 1.375 15168 3/16 16.781 Next Item:
Camco
* For retrieval of Z-5 series running tools
Z-6 Series Running Tool

Section Menu Rev 0 [11.02]


Camco Last Item

You might also like