BCM50 / Long Entry http://alpha.tmit.bme.hu/meresek/bcmdial_eng.

htm

BCM50 - Dialing plan, network services

See also: Definity dial-plan, Trunks

Content:

Dialing plan
BCM 50 trunks
BCM 50 networks
Handling of incoming calls
Handling of outgoing calls
Dialing Plan menu - Dialing plan, programming of network operation

In details:

Dialing plan
Dialing plan contains instructions related to dialing strings used for setting up connections in private networks.
Operator of the exchange can suit flexibly his requirements to the possibilities provided by the exchange with the
help of the dialing plan.

Strings used for establishing a connection can be the following:

Set of the possible

Name Description
values
Directory number
Dialing number (assigned to a device, application, or hunt group)
(DN)
Service access code (for extension (Feature) or network (e.g.
Access code
Trunk access) service)
Destination (steering)
Route (selection) code
code

Unique dialing plan of BCM 50 is based on some - mostly standardized - numbering schemes.

BCM 50 trunks - Trunk lines of BCM 50 can be connected to:

Private network
Public network - The dialing plan must also contain then strings applied in public networks.

BCM 50 networks

There are numerous private networks, that can be realized from BCM exchanges. They are the following:

MCDN - Meridian Customer Detailed Networking.

DPNSS -
ETSI -
ETSI QSIG
DMS-100/DMS-250

Handling of incoming calls:

BCM 50 supports both the two operation modes - with or without an operator.

PBX system - a switch-off by the operator

1 of 8 4/15/2015 7:38 AM
BCM50 / Long Entry http://alpha.tmit.bme.hu/meresek/bcmdial_eng.htm

DID (Direct Inward Dialing) system - an operation mode without an operator

Dialing plan menu:

General - general part of the dialing plan

DNs - internal dialing numbers; (external dialing numbers)
Public Network - a part of the dialing part related to the public networks
Private Network - a part of the dialing part related to the private networks
Line pools - In case of outgoing calls we can assign codes and devices to the line pools (outgoing trunks). Only
devices assigned to pools can initiate an outgoing call.
Routing - Programming of routes of outgoing calls.

Dialing plan - General

General part of the dialing plan.

Here we can program a pretranslation service, too.

Parameter Description Values

Global
settings
DN length
Length of the internal dialing number 4
(intercom)
Dialing
4
timeout
Change DN First digit of internal DNs

2 of 8 4/15/2015 7:38 AM
BCM50 / Long Entry http://alpha.tmit.bme.hu/meresek/bcmdial_eng.htm

Change DN first digit of DNs/DN lengts 5

Access codes Service access codes (park, "outer" line)
park prefix access code 1
analog: 9 - line pool A destination code - "outer call" - Call to the public network (in case of
External code none
analogue devices)
Direct Dial Initializing a call by dialing only one digit
Direct dial
Dialing number of devices that can be called with one-digit number (reception, operator) 0
digit
Direct dial set: a device, that can be called even with a digit number. Typically belong to these
Direct Dial
kind of devices the reception, the operator, or the administrator of the exchange. Here one
Sets
number, and five devices can be written. The five devices can use that number scheduled.
Set Number of the device 1..5
Type Internal/external/none
Internal DN
External No.
Facility

Dialing plan - DNs

Table of the internal dialing numbers used in the exchange (All System DNs).

Parameter Description Values

DN Directory Number
set - telephone device
DN Type Type of directory number application
hunt group

T7316E - Digital (ISDN) telephone

Model Device type 1120E/2002 - IP telephone
Analog - Analogue telephone (adapter: ATA2)

Dialing plan - Public Network

Part of the dialing plan related to public networks.

3 of 8 4/15/2015 7:38 AM
BCM50 / Long Entry http://alpha.tmit.bme.hu/meresek/bcmdial_eng.htm

Parameter Description Values

Public network Exchange evaluates dialing numbers of incoming calls from
settings the public network on the basis of data given here.
2..12
Public Received
Length of the incoming dialing number In case of DID system it is
number length
equal with the length of DN.
Dialing number of an direct access.
Public Auto DN
Length is equal with the lenght of the incoming dialing number.
Dialing number of an access with password. Calling person can
Public DISA DN
change password with dialing it.
Public network DN
Lengths
DN prefix
DN length
Carrier Access Code = Equal Access Identifier Code (CAC) +
Carrier Codes
Carrier Identification Code
Code prefix
Id length

Dialing plan - Private Network

Part of the dialing plan related to private networks.

4 of 8 4/15/2015 7:38 AM
BCM50 / Long Entry http://alpha.tmit.bme.hu/meresek/bcmdial_eng.htm

Parameter Description Values

Exchange evaluates dialing numbers
Private
of incoming calls from the private
network
network on the basis of data given
settings
here.
Private
Length of the incoming dialing 2..7
Received
number In case of DID system it is equal with the length of DN
number length
Dialing number of an direct access.
Private Auto
Length is equal with the lenght of the
DN
incoming dialing number.
Dialing number of an access with
Private DISA
password. Calling person can change
DN
password with dialing it.
Private access Private network access is available
e.g. like 06, but its length could be 0 in case of CDP.
code with the help of this code.
UDP - Universal Dialing Plan:
Access code for routing is necessary.

private access code + location code + Set DN

Private network Type of the dialing plan of a private (6-403-xxxx)
type network. CDP - Coordinated Dialing Plan:
all the devices can be called in the private network with
dialing numbers of the same lenght (the length of the
DN).

5 of 8 4/15/2015 7:38 AM
BCM50 / Long Entry http://alpha.tmit.bme.hu/meresek/bcmdial_eng.htm

Routing is made on the basis of a destination code

generated from the first, or first two numbers of the
dialing number. (Pl: E.g. 2xxx is one of the directions,
and 3xxx is the another one)
Attention! CDP is called UDP (Uniform Dialing Plan)
in terminology of the Definity exchange!!
None - there is no any specificated dialing plan .

Private network
1..127
ID
Location code UDP only max. 7 digits
Private DN
DN length in the private network 3..14
length
Access codes and network settings
MCDN
in case of MCDN protocol
local access
code
national access
code
special access
code
ICCL yes/no
TRO yes/no
TAT yes/no
Network settings in case of VoIP
VoIP
protocol
Virtual Private
Network ID
Zone ID
ETSI Settings in case of VoIP protocol
Network
Diversion
MCID

Dialing plan - Line Pools

List of outgoing trunks used in the exchange (line-pools). We can assign access code or device dialing number here to the
line groups.

Parameter Description Values

A...O, BlocA, BlocB
Identifier of line pools.
Line Pools Default line/pool
Pools can be assigned to routes in the routing table.
assignment
Outgoing trunk access code (Basic telephony routing). We can assign such max. 3 digits, that we
Access Code a code only to the basic line pools (A..O). We dial this code before the didn't use to another
dialing number, when we make an outgoing call. routing.
Details

6 of 8 4/15/2015 7:38 AM
BCM50 / Long Entry http://alpha.tmit.bme.hu/meresek/bcmdial_eng.htm

We can list here the dialing numbers, that have an access to he trunk for
DNs with Access initiating an outgoing call.
To Line Pool This assignment can be programmed by devices under the Line Pool
Access tab, too.

Dialing plan - Routing - Routes - Handling of outgoing calls

When we call an external dialing number, we must select a trunk we want to build up the call through. In BCM 50
routing will happen on the following two basic ways:

Basic telephony routing - line-pool with an access code

Tandem routing - direct access (without an access code) of the external dialing numbers applying CDP and
destination codes.
Programming happens with filling out the following two tables.

Definity equivalent

Route destination code programming

Parameter Description Values

This code is simply the first number of the external dialing
number, that we wanted to call.
Value 2 means, for example, that exchange considers the 2xxx
Destination numbers to external dialing numbers, and we can initiate outgoing
Input: routing (access) code
code calls for these numbers.
Codes must be given in accordance with the dialing plan of the
telecommunication test network.

7 of 8 4/15/2015 7:38 AM
BCM50 / Long Entry http://alpha.tmit.bme.hu/meresek/bcmdial_eng.htm

Definity equivalent
Output: A normal (not alternative)
Normal
identifier of the route assigned to the
Route
route code.
Absorbed
Length
Wild Card
0..9

List of routes for the access to external dialing numbers:

Definity equivalent

Parameter Description Values

Route Input: Identifier of the route 1...999
External
max. 24 digits
Number
Output: Identifier of the outgoing trunk (pool) realizing
Use Pool Pool A..O, BlocA, BlocF
the route
private - Private OLI number will be
sent
public (unknown)
DN_type It gives the type of the route used for forwarding the call. special (international)
national
local (subscriber)

Service
Service ID

8 of 8 4/15/2015 7:38 AM