The Glass Transition

Keywords
amorphous, crystal, elastomer, thermoplastic

What Is A Glass Anyway?

Have you ever left a plastic bucket or some other plastic object
outside during the winter, and found that it cracks or breaks more
easily than it would in the summer time? What you experienced was
the phenomenon known as the glass transition. This transition is
something that only happens to polymers, and is one of the things that
make polymers unique. The glass transition is pretty much what it
sounds like. There is a certain temperature(different for each polymer)
called the glass transition temperature, or Tg for short. When the
polymer is cooled below this temperature, it becomes hard and brittle,
like glass.

Some polymers are used above their glass transition temperatures,

and some are used below. Hard plastics
like polystyrene and poly(methyl methacrylate), are used below their
glass transition temperatures; that is in their glassy state. Their Tg's
are well above room temperature, both at around 100 oC.
Rubber elastomers like polyisoprene and polyisobutylene, are used
above their Tg's, that is, in the rubbery state, where they are soft and
flexible.
 Amorphous and Crystalline Polymers

We have to make something clear at this point. The glass transition is

not the same thing as melting. Melting is a transition which occurs
in crystalline polymers. Melting happens when the polymer chains fall
out of their crystal structures, and become a disordered liquid. The
glass transition is a different kind of transition which happens
to amorphous polymers; that is, polymers whose chains are not
arranged in ordered crystals, but are just strewn around in any old
fashion, even though they are in the solid state.

But even crystalline polymers will have some amorphous portions.

These usually makes up 40-70% of the polymer sample. This is why
the same sample of a polymer can have both a glass transition
temperature and a melting temperature. But you should know that the
amorphous portion undergoes the glass transition only, and the
crystalline portion undergoes melting only. In fact, most so-called
"crystalline polymers" are actually mostly amorphous which means
they will have both.
The Snake Pit

Now, to understand just why polymers with no order to them are hard
and brittle below a certain temperature and soft and pliable above it, it
can help to think of a polymer in the amorphous state as a big room
full of slithering snakes. Each snake is a polymer chain. Now as you
may remember, snakes are cold blooded animals, so all their body
heat has to come from their surroundings. When it's warm, the snakes
are happy, and can go on about their business of slithering and sliding
with no trouble at all. They will move all about randomly, over and
around each other, and they slither hither and thither, just having a
great time, or as good a time as snakes ever have.

But when it gets cold, snakes don't move too much. They slow down
without any heat, and tend to just sit still. Now they're still all wrapped
around, over, and under each other, but as far as motion is
concerned, it just doesn't happen.
Now imagine trying to drive a bulldozer through this room full of
snakes. If it's warm, and the snakes are moving, they can quickly
slither out of your way, and the bulldozer moves through the room,
causing a minimal amount of snake damage. But if it's cold, one of two
things will happen to the motionless snakes. Either (A) the snakes will
be stronger than the bulldozer, and the bulldozer won't get through,
and the snakes will stay put; or (B) the bulldozer will be stronger than
the snakes, and they'll get squashed, still not moving anywhere.

Polymers are the same way. When the temperature is warm, the
polymer chains can move around easily. So, when you take a piece of
the polymer and bend it, the molecules, being in motion already, have
no trouble moving into new positions to relieve the stress you have
placed on them. But if you try to bend sample of a polymer below
its Tg, the polymer chains won't be able to move into new positions to
relieve the stress which you have placed on them. So just like in the
example of a room full of cold snakes, one of two things will happen.
Either (A) the chains are strong enough to resist the force you apply,
and the sample won't bend; or (B) the force you apply will be too much
for the motionless polymer chains to resist, and being unable to move
around to relieve the stress, the polymer sample will break or shatter
in your hands.

This change in mobility with temperature happens because the

phenomenon we call "heat" is really a form of kinetic energy; that is,
the energy of objects in motion. It is actually an effect of random
motion of molecules, whether they are polymer molecules or small
molecules. Things are "hot" when their molecules have lots of kinetic
energy and move around very fast. Things are "cold" when their
molecules lack kinetic energy and move around slowly, or not at all.

Now the exact temperature at which the polymer chains undergo this
big change in mobility depends on the structure of the polymer. To see
how a small change in structure can mean a big change in Tg, take a
look at the difference between poly(methyl acrylate) and poly(methyl
methacrylate) on the acrylate page.
Twistin' the Night Away
There is a difference between polymers and snakes that we probably
should discuss at this point. An individual snake is not only wiggling
around, but actually moving from one side of the room to the other.
This is called translational motion. When you walk down the street,
presuming you're not like most Americans who never walk anywhere,
you are undergoing translational motion. While polymers are not
incapable of such motion, mostly they are not undergoing this kind of
motion. But they are still moving around, wiggling this way and that,
much like little kids in church. To be sure, by the time we get down to
the glass transition temperature, it is already too cold for the polymer
molecules, tangled up in each other as they are, to move any distance
in one direction.

The motion that allows a polymer way above its glass transition
temperature to be pliable is not usually translational motion, but what
is known in the business as long-range segmental motion. While the
polymer chain as a whole may not be going anywhere, segments of
the chain can wiggle around, swing to and fro, and turn like a giant
corkscrew. The polymer samples may be thought of as a crowd of
people on a dance floor. While each whole body tends to stay in the
same spot, various arms, legs, and whatnot are changing position a
lot. When the temperature drops to near or below the Tg, for polymers
the party's over, and the long-range segmental motion grinds to a halt.
When this long-range motion ceases, the glass transition occurs, and
the polymer changes from being soft and pliable to being hard and
brittle. So when the "Polar Vortex" hits your town next time, DON'T try
to shovel snow with one of those plastic snow shovels.
See for yourself

Now to make sure this is all clear, we made a little movie showing
what happens to the polymer chains at the glass transition
temperature. Click here to watch it.
Try This!

Want to have some fun? First, get your teacher to bring some liquid
nitrogen to class, or maybe some "dry ice" suspended in acetone or
methanol. Then put some in a styrofoam cup, and drop in some
household objects made from polymers, like rubber bands or plastic
wrap. The liquid nitrogen, being so cold, will cool the objects below
their glass transition temperatures. Try to bend your rubber band (hold
it with a pair of pliers, because you could get frostbite if you try to
touch it with your fingers) and it will shatter! Neato, huh? The rubber
band will shatter because it's below its glass transition temperature.
And sandwich wrap? It will crumple and sound like hard thin plastic,
and might even shatter if it's cold enough.
Measuring the Tg

If you want to know how we measure both melting points and Tg's,

plus latent heats of melting, and changes in heat capacity, now there's
a wonderful page to tell you all about a technique called differential
scanning calorimetry. Go visit it!
Where Next?

Want to know more about the wonderful glass transition? Read these
little segments!

Messing Around with the Tg

The Tg vs. Melting
What Becomes the High Tg Polymer?
Messing Around with the Glass Transition

Sometimes, a polymer has a Tg that is higher than we'd like. That's
ok, we just put something in it called a plasticizer. This is a small
molecule which will get in between the polymer chains, and space
them out from each other. We call this increasing the free volume.
When this happens they can slide past each other more easily. When
they slide past each other more easily, they can move around at lower
temperatures than they would without the plasticizer. In this way,
the Tg of a polymer can be lowered, to make a polymer more pliable,
and easier to work with.
If you're wondering what kind of small molecule we're talking about,
here are some that are used as plasticizers:

Have you ever smelled "that new car smell" in some friend's new car?
It's not something I smell too often on the money I make, but that
smell is the plasticizer evaporating from the plastic parts on the inside
of your car. After many years, if enough of it evaporates, your
dashboard will no longer be plasticized. The Tg of the polymers in
your dashboard will rise above room temperature, and the dashboard
will become brittle and crack.

Darn it!
The Glass Transition vs. Melting

Keywords:
first order transition, heat capacity, second order transition

It's tempting to think of the glass transition as a kind of melting of the

polymer. But this is an inaccurate way of looking at things. There are a
lot of important differences between the glass transition and melting.
Like I said earlier, melting is something that happens to a crystalline
polymer, while the glass transition happens only to polymers in the
amorphous state. A given polymer will often have both amorphous
and crystalline domains within it, so the same sample can often show
a melting point and a Tg. But the chains that melt are not the chains
that undergo the glass transition.
There is another big difference between melting and the glass
transition. When you heat a crystalline polymer at a constant rate, the
temperature will increase at a constant rate. The heat amount of heat
required to raise the temperature of one gram of the polymer one
degree Celsius is called the heat capacity.

Now the temperature will continue to increase until the polymer

reaches its melting point. When this happens, the temperature will
hold steady for awhile, even though you're adding heat to the polymer.
It will hold steady until the polymer has completely melted. Then the
temperature of the polymer will begin to increase once again. The
temperature rising stops because melting requires energy. All the
energy you add to a crystalline polymer at its melting point goes into
melting, and none of it goes into raising the temperature. This heat is
called the latent heat of melting. (The word latent means hidden.)

Now once the polymer has melted, the temperature begins to rise
again, but now it rises at a slower rate. The molten polymer has a
higher heat capacity than the solid crystalline polymer, so it can
absorb more heat with a smaller increase in temperature.

So, two things happen when a crystalline polymer melts: It absorbs a

certain amount of heat, the latent heat of melting, and it undergoes a
change in its heat capacity. Any change brought about by heat,
whether it is melting or freezing, or boiling or condensation, which has
a change in heat capacity, and a latent heat involved, is called a first
order transition.

But when you heat an amorphous polymer to its Tg, something

different happens. First you heat it, and the temperature goes up. It
goes up at a rate determined by the polymer's heat capacity, just like
before. Only something funny happens when you reach the Tg. The
temperature doesn't stop rising. There is no latent heat of glass
transition. The temperature keeps going up.

But the temperature doesn't go up at the same rate above the Tg as

below it. The polymer does undergo an increase in its heat capacity
when it undergoes the glass transition. Because the glass transition
involves change in heat capacity, but it doesn't involve a latent heat,
this transition is called a second order transition.

It may help to look at some nifty pictures. The plots show the amount
of heat added to the polymer on the y-axis and the temperature that
you'd get with a given amount of heat on the x-axis.

The plot on the left shows what happens when you heat a 100%
crystalline polymer. You can look at it and see that it's discontinuous.
See that break? That's the melting temperature. At that break, a lot of
heat is added without any temperature increase at all. That's the latent
heat of melting. We see the slope getting steeper on the high side of
the break. The slope of this kind of plot is equal to the heat capacity,
so this increase in steepness corresponds to our increase in heat
capacity above the melting point.

But in the plot on the right, which shows what happens to a 100%
amorphous polymer when you heat it, we don't have a break. The only
change we see at the glass transition temperature is an increase in
the slope, which means, of course, that we have an increase in heat
capacity. We can see a heat capacity change at the Tg, but no break,
like we do in the plot for the crystalline polymer. As I said before, there
is no latent heat involved with the glass transition.
And this, my friends, right before your eyes, is the difference between
a first order transition like melting, and a second order transition like
the glass transition.
What Becomes the High Tg Polymer?

Ok, we know at this point that some polymers have high Tg's, and
some have low Tg's. The question we haven't bothered to ask yet is
this: why? What makes one polymer glass transition at 100 oC and
another at 500 oC?

The very simple answer is this: How easily the chains move. A
polymer chain that can move around fairly easily will have a very
low Tg, while one that doesn't move so well will have a high one. This
makes sense. The more easily a polymer can move, the less heat it
takes for the chains to commence wiggling and break out of the rigid
glassy state and into the soft rubbery state.

So then I suppose we've brought ourselves to another question...

What makes one polymer move more easily than another?

I'm glad you asked that. There are several things that affect the
mobility of a polymer chain. Go look at each one!
Backbone Flexibility
Pendant Groups Part I: Fish Hooks and Boat Anchors
Pendant Groups Part II: Elbow Room
Backbone Flexibility

This is the biggest and most important one to remember. The more
flexible the backbone chain is, the better the polymer will move, and
the lower its Tg will be. Let's look at some examples. The most
dramatic one is that of silicones. Let's take a look at one called
polydimethylsiloxane.
This backbone is so flexible that polydimethylsiloxane has a Tg way
down at -127 oC! This chain is so flexible that it's a liquid at room
temperature, and it's even used to thicken shampoos and
conditioners.

Now we'll look at another extreme, poly(phenylene sulfone).

This polymer's backbone is just plain stiff. It's so rigid that it doesn't
have a Tg! You can heat this thing to over 500 oC and it will still stay in
the glassy state. It will decompose from all the heat before it lets itself
undergo a glass transition! In order to make a polymer that's at all
processable we have to put some flexible groups in the backbone
chain. Ether groups work nicely.
Polymers like this are called poly(ether sulfones), and those flexible
ether groups bring the Tg of this one down to a more manageable
190 oC.
Pendant Groups Part I:
Fish Hooks and Boat Anchors

Pendant groups have a big effect on chain mobility. Even a small

pendant group can act as a fish hook that will catch on any nearby
molecule when the polymer chain tries to move like corkscrew.
Pendant groups also catch on each other when chains try to slither
past each other.

One of the best pendant groups for getting a high Tg is the big bulky
adamantyl group. An adamantyl group is derived from a compound
called adamantane.

Click on the adamantane to see it in 3-D and find out more about this
interesting molecule!

A big group like this does more than just act like a hook that catches
on nearby molecules and keeps the polymer from moving. It's a
downright boat anchor. Not only does it get caught on nearby polymer
chains, its sheer mass is such a load for its polymer chain to move
that it makes the polymer chain move much more slowly. To see how
much this affects the Tg, just take a look at two poly(ether ketones),
one with an adamantane pendant group and one without.
The Tg of the polymer on the top is already decent at 119 oC, but the
adamantyl group raises it even higher, to 225 oC.
Pendant Groups Part II:
Elbow Room

But big bulky pendant groups can lower the Tg, too. You see, the big
pendant groups limit how closely the polymer chains can pack
together. The further they are from each other, the more easily they
can move around. This lowers the Tg, in the same way
a plasticizer does. The fancy way to say that there is more room
between the polymer chains is to say there is more free volume in the
polymer. The more free volume, the lower the Tg generally. We can
see this with a series of methacrylate polymers:
You can see a big drop each time we make that pendant alkyl chain
one carbon longer. We start out at 120 oC for poly(methyl
methacrylate), but by the time we get to poly(butyl methacrylate)
the Tg has dropped to only 20oC, pretty close to room temperature