Scribd
Upload
163 views

Cable Diagram: Micrologix 1500 Proface GP Series

This document provides a cable diagram and protocol settings for connecting a Micrologix 1500 PLC to a Proface GP series HMI. It specifies using a 9-pin female to 25-pin male serial cable with RS-232 protocol settings of 19200 baud, even parity, 1 stop bit, and DTR/ER handshaking. The source ID is set to 0 and destination ID is set to 1.

Uploaded by

Irfan Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
163 views

Cable Diagram: Micrologix 1500 Proface GP Series

This document provides a cable diagram and protocol settings for connecting a Micrologix 1500 PLC to a Proface GP series HMI. It specifies using a 9-pin female to 25-pin male serial cable with RS-232 protocol settings of 19200 baud, even parity, 1 stop bit, and DTR/ER handshaking. The source ID is set to 0 and destination ID is set to 1.

Uploaded by

Irfan Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

CABLE DIAGRAM

PROFACE GP
BETWEEN MICROLOGIX 1500 and
Series

PROTOCOL* Allen Bradley SLC500 series

MATERIALS QUANTITY PROTOCOL SETTINGS*


 RS-232
 8-bit
9-pin D-sub Female 1no  EVEN Parity
Connector  Stop Bit – 1
25-pin D-sub Male 1no  DTR/ER
Connector  19200 BPS
 Source ID – 0(zero)
 Destination ID – 1
GP=0 PLC=0
CD_015 PREPARED DATE 30-8-05 By AP
 NOT APPLICABLE FOR ALL DIAGRAMS

TOSHNI-TEK INTERNATIONAL
CHENNAI - 044-26444214 / 5 DELHI – 09811162339
MUMBAI - 022 25833476 / 746 HYDERABAD - 040 3201702
BANGLORE – 080 25587828

You might also like