Scribd
Upload
106 views

Nmo Critical Lift Plan Sheet

This critical lift plan outlines the necessary information for lifting a load using a hydraulic/lattice mobile crane. It documents details of the load, crane, rigging, lift considerations, and pre-lift checklist. The load weight is confirmed and the lift capacity of the crane at the required boom length and radius is specified. Sign-off is required by the supervisor, crane operator, and lead rigger to verify all preparations are complete before conducting the lift.

Uploaded by

Ihsan Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
106 views

Nmo Critical Lift Plan Sheet

This critical lift plan outlines the necessary information for lifting a load using a hydraulic/lattice mobile crane. It documents details of the load, crane, rigging, lift considerations, and pre-lift checklist. The load weight is confirmed and the lift capacity of the crane at the required boom length and radius is specified. Sign-off is required by the supervisor, crane operator, and lead rigger to verify all preparations are complete before conducting the lift.

Uploaded by

Ihsan Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

NMO CRITICAL LIFT PLAN SHEET

HYDRAULIC / LATTICE MOBILE CRANE

Unit #: Date: _________________________


Location:
Load Description:
Lift Description:
Diagram of Crane Lift & Load Placement Attached: Yes _______ No _______

A. Load F. Crane Placement


1. Load condition: 1. Any deviation from smooth, solid foundation?
2. Wt. Empty lbs. ____________________________________________________
3. Wt. of Contents lbs. 2. High voltage or electrical hazards?
4. Wt. of Aux. Block lbs. ____________________________________________________
5. Wt. of Main Block lbs. 3. Buildings, Equipment, Plant, or Services to lift or swing over?
6. Wt. of Lifting Beam lbs. ____________________________________________________
7. Wt. Of Slings/Shackles/Other Rigging lbs. 4. Travel ? _____________________________________________
8. Wt. Of Jib (erected/stowed/stored) lbs. ____________________________________________________
9. Wt. Of Hoist Rope (extra) lbs. 5. Swing direction ? _____________________________________
10. Wt. Of Excess Load Material lbs.
11. Other lbs. G. Considerations
Gross Weight lbs. 1. If lift exceeds 75% of crane's capacity, attach
additional special instructions, restrictions,
Source of Load Wt. Information: (drawings, calcs.,ect.) diagrams for crane, rigging, lift, ect.
Yes________ No _________
Load Wt. Confirmed by: 2. Multiple crane lifts require a separate plan for
each crane.
B. Crane 3. Any changes in the crane configuration,
1. Type of Crane placement, rigging, lifting scheme, or calculations
2. Maximum Crane Capacity. require that a new critical lift plan be developed.
3. Boom Length ___________________________________________
4. Radius at Pick-up ______________ ft./Set-down ____________ft H. Pre-lift checklist-Completed Prior to Lift
5. Crane capicity at radius: over rear ______________________ lbs. 1. Crane insp 10. Rigger Qualified
Over side _____________ lbs. / Over front _______________ lbs. 2. Rigging ins 11. Signal system
6. Boom angle at Pick-up __________ft. / Set-down ___________ft. 3. Crane set-u 12. Tag lines
7. Max. rated capacity of crane at this boom length, radius and 4. Swing room 13. Wind/Temp.
boom angle for this lift is ______________________________ lbs. 5. Hoist heigh 14. Safety spotter
8. Max. load on crane for this lift is ________________________lbs. 6. Head room 15. Traffic
9. Lift is ______________________% of the crane's rated capacity 7. Crane Ctrw 16. Tailboard
C. Jib/Fly 8. Load test 17. Site control
1. Erected __________ Stowed ___________ Stored ___________ 9. Operator Q 18. Signatures
2. If jib/fly to be used: length ____________ angle _____________
3. Rated capacity of jib/fly from chart _______________________lbs. I. Notes/Comments

D. Hoist Rope
1. Rope diameter _____________ Number of parts ______________
2. Lift capacity based on parts ____________________________lbs.

E. Rigging __________________
1. Hitch type _____________________________________________ Supervisor Signature Date
2. No. of slings ____________ Size _________ Type ____________
3. Sling assembly rated capacity __________________________lbs. __________________
4. Shackle size ______________ No. of shackles _____________ Crane Operator Signature Date
5. Shackle rated capacity ________________________________lbs.
6. Shackle secured to load by: ______________________________ __________________
______________________________________________________ Lead Rigger Signature Date

You might also like