MR3000 motion recorders

Genuine vibration monitoring solutions

Product Line Brochure
2
 VIBRATION MONITORING –

„
SOLUTION PROVIDER

Staying closely connected to the markets and bringing the best products fulfilling
our customer needs are key challenges and motivation for BARTEC SYSCOM.
From early design stage to product finalization, from data acquisition to infor-
mation processing and evaluation by the SYSCOM Cloud Software, the highly
relevant and easy to use vibration monitoring solutions offered by BARTEC SYS-
COM have been designed to bring the most efficient service to our customers.

Market adequacy with specific offerings, latest technologies integration, pre-

mium product manufacturing, high-end versatile recorders and state of the art
cloud software are the results of a long term strategy to make outstanding vibra-
tion monitoring devices finally available.

BARTEC SYSCOM product lines include:

MR3000C for Construction site monitoring | MR3000TR for Traffic and Railways
monitoring | MR3000BLA for Blasting monitoring | MR3000DMS for Dam Moni-
toring System | MR3000SB for Structure and Building monitoring.

We are proud to unveil our monitoring solutions in the following pages and very
glad to count on your trust in our products.

“
M. van der Reijden
Managing Director

BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider 3

Specific instrumentation for targeted markets

civil engineering vibrations - Seismic monitoring vibrations

Civil engineering offering with free standing

devices for time limited monitoring
V
High quality
These motion recorders are widely used by civil and structural engineers for
multiple vibration monitoring applications. Easy to use, highly performing and
best in class DIN45669-
versatile using the Web User Interface, these devices are must have instruments
1 velocity sensors
for competitive edge!
(Geophones)

MR3000C MR3000BLA MR3000TR

Strong motion offering with all-in-one instrumenta-

A
Unrivalled stability and
tion for permanent earthquake monitoring
Fully integrated for easier installation, robustness and reliability are key features
robustness with of these permanent monitoring stations. Adding automated state of health noti-
MEMS (Micro Electro fications and alarming capabilities outperforms most and achieves lowest cost
Mechanical System) of ownership!
acceleration sensors

MR3000DMS MR3000SB

SCS
Syscom Cloud Software solution offering
Dedicated vibration monitoring SaaS (Software as a Service) for straightforward
http://scs.bartec-syscom.com data visualization, project management and automated reporting. Compatible
with any MR3000 device.

4 BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider

main markets Civil engineering
Structural vibration monitoring technologies - Human exposure evaluation to structural vibration

Construction site monitoring Railways monitoring

Vibration induced by heavy work on construction sites can have damaging effects Vibration induced by trains, trams,
on the surrounding buildings. In this regard, a lot of regulations to evaluate vibra- metros are usually monitored in urban
tion effects on structures are enforced, for example: DIN4150-3 (D), SN640312a areas with potentially wider nuisance
(CH), ÖNORM9020 (A), UNE22-381 (ES), BS5228 (UK), RI8507 (USA), etc…. range. Such monitoring is needed to
Most of these regulations take into consideration transitory or continuous vibra- record PPV (Peak Particle Velocity)
tions and specify different threshold levels that must not be exceeded. Another and associated frequency spectra
evaluation is usually performed related to human comfort, typically following near the tracks and in structures for
DIN4150-2 among others. MR3000C devices are tailored for such measure- modeling, prediction of the propaga-
ments and provide fully compliant monitoring according to all these regulations. tion of vibrations and structure borne
noise assessment. These base conditions can be evaluated and potentially
damped if needed, however usually involving heavy work. For efficient remote
monitoring, the MR3000TR with its relay outputs can typically trigger a camera
in order to record trains passing by (Passenger, freight, etc…) for optimum data
post-processing. When operating in a master-slave configuration, it is also able
to trigger and capture vibrations in the field and in-structure only caused by
trains.

Blasting monitoring

SHA (Structural Health Assessment) Working with explosives is always a

modal analysis sensitive matter and when proceed-
ing with shot firing, safety is of ut-
Determination of the dynamic behavior is often used to monitor the state of
most concern. Blast evaluation and
health of structures over time and to study effects of aging and deterioration
documentation is therefore part of
due to overstraining. Key parameters to consider are natural frequencies and
the process and monitoring devices
damping ratios, calculated from recordings of ambient noise or forced vibrations.
enable systematic potential hazards
MR3000C large frequency bandwidth and high dynamic range ensure that even
assessment. Ground induced vibra-
low amplitudes and low natural frequencies are captured with a good resolution.
tions and air over pressure generated
by the explosions are recorded by
MR3000BLA monitoring devices, for
quick blast analysis and proper shot
documentation.

BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider 5

main features Civil engineering
MR3000C for Construction site monitoring
MR3000TR for Traffic and Railways monitoring
MR3000BLA for Blasting monitoring

MR3000C
3 Channels
 WebUI quick access and easy
parametrization
Int sensor
 Trigger based acquisition
Ext sensor High dynamic triaxial external sensor  Non corruptible data with SD card
state of health ensuring highest
Vertical reliability
 Robust and compact aluminum
Horizontal
housing for long product lifecycle
Acceleration  Typical standards or user defined
Battery pack alarming and notifications for
Velocity versatile usage
 Remote connectivity and full
Internal modem 3G SCS compatibility for painless
monitoring solution
WiFi

MR3000TR
3 Channels
 Same features like the MR3000C

Int sensor
above mentioned
 2 Relay outputs for analog
Ext sensor Uniaxial sensors
alarming
2 Relay output  1 trigger input for MR3000TR
1 Trigger input automated event recording

Alarm
2 Relay outputs/1 Hardware trigger input
Velocity

Internal modem 3G

WiFi

Alarm box

Mr3000BLA
4 Channels
 High sensitive triaxial
Velocity MS2003BLA, DIN45669 class 1
 Premium sound microphone
Microphone Blast triaxial velocity sensor  All-in-one IP66 and easy to carry

Internal modem
3G housing
 100-240V AC with power

WiFi LED indicator or DC power

 High quality LEMO push-pull
connectors
Blast sound pressure microphone
 Internal long life battery

6 BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider

major benefits Civil engineering

Versatile Web User Interface

Just connect to the MR3000 and automatically load the WebUI with all the avail-
able functionalities, bringing ease of use, flexibility and minimum learning time.

Only 1 product needed for versatile applications.

No hidden training costs.

Data integrity
Trigger based acquisition and non-erasable sole event is proof of efficient data
analysis and recorded veracity. Data is vital and therefore monitoring SD-card
state of health with automatic notifications fully empower that aspect. Even
in case of network failure, no data will be lost. MR3000 with their distributed
intelligence are absolutely able to operate in a free standing mode.

100% recorded data safety guarantee as it is a primary need!

100% data confidence as it cannot be corrupted!

Outstanding connectivity
Ethernet based communication with wired LAN and 3G - WiFi (access point) for
wireless connection. Multiple services are already integrated in each MR3000
such as VPN, DDNS, FTP, SMTP, API, SCS (Syscom Cloud Software) for outstand-
ing data processing. Smartphone

Tablet
Open system with advanced data processing capabilities or simplicity Power
LAN / PoE
12 VDC

with Syscom Cloud Software for efficient data recovery.

Data ownership truly remain yours. Focus on your core business and do
AUX GPS

PC

not waste more time in connectivity management! MR3000C/TR

Exceptional Durability
Housing made of cast aluminum and system built with top quality industrial
grade components, achieving best in class DIN45669 class 1 tolerance on
the long run.

Very low cost of ownership. Made for harsh environment usage.

Quick alarm
SMS and Emails notifications are sent automatically in just a few seconds,
ensuring very prompt actions in case of vibration level exceedance.

Act quickly for increased safety in case of perilous vibrations.

BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider 7

main markets Strong motion
Asset monitoring technologies - Sustainable structural risk assessment

Dam monitoring Building monitoring

One of the most critical aspects to ensure safety and sustainability of all dams All the buildings are subject to vibra-
is the ability to measure, evaluate and take prompt actions following an earth- tions originated from many different
quake. Therefore equipping such heavy structures with dedicated instrumen- sources. Among most energetic vi-
tation is highly recommended to fully assess its integrity and to put in place bration affecting buildings are those
relevant responsive actions. Several MR3000DMS devices are located typically generally caused by earthquakes.
at maximum deflection points, abutments, free-field and in-structures for proper Such strong motions, depending on
structural monitoring. the intensity, can damage the struc-
ture and could lead to a collapse in
the most critical cases (harmonic
amplifications).
In order to avoid such incidents, structural health monitoring is a must and
BARTEC SYSCOM solution with networkable motion recorders MR3000SB will
ensure automatic, fast and reliable data acquisition and evaluation.

Hospital monitoring

Critical infrastructures like hospitals

Historical building monitoring are key structures to be monitored
in case of potential earthquakes haz-
A global challenge is protecting legacy landmark symbols for cultural and ards. Utmost care should be taken
generational perspectives and historical buildings are indeed a dominant part with structural analysis and rein-
of this heritage. As it involves usually very old and special structures that may forcements and therefore permanent
be delicate, vibration monitoring is a critical preservation aspect that needs to seismic monitoring instrumentation
be continuously evaluated with minimum visual and structural impact. BARTEC should be installed. Quick post-event
SYSCOM solution with the all-in-one MR3000SB Red Box is entirely fulfilling earthquake evaluation is key factor
this need. for shortest building operability down
time and achievable with best in class
MR3000SB connectivity.

8 BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider

main features Strong motion
MR3000DMS for Dam Monitoring System
MR3000SB for Structures and Buildings

MR3000DMS
Vertical  All-in-one rugged IP67 housing

Horizontal  Seismically tested and certified devices

Acceleration  Fiber Optics for long distance on dams

 LAN networkable devices with trigger and alarming voting logic

Over Voltage Protection
AC/  Self-diagnostic features
AC/DC DC

DC/  Best in class connectivity in a Star network architecture

DC/DC DC
 Seismic trigger based relay output
Fiber Optics  MEMS triaxial sensor

Star network  Internal battery

 Time synchronization using GPS

MR3000SB
Vertical  All-in-one rugged IP67 housing

Horizontal  Seismically tested and certified devices

 Fiber Optics for long distance or RJ45 copper cable for

Acceleration
shorter distance on buildings
Fiber Optics
 LAN networkable devices with trigger and alarming voting logic
RJ45 copper cable  Self-diagnostic features

Daisy chain network  Best in class connectivity in a Daisy chain network architecture
(LAN 1 & LAN 2)
 Seismic trigger based relay output

 MEMS triaxial accelerometer

 Internal battery

 Time synchronization using GPS

BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider 9

major benefits Strong motion

Straightforward installation
Everything needed is already integrated in a unique Red Box, such as cable
glands and terminals for cabling, battery, sensor, recorder and industrial
SD-card. The connection between the devices is simple and it can be reali-
zed with fiber optics or ethernet cables.

All-in-one product for a quick installation.

Automated self-diagnostics features

Periodic test-pulse notifications and recorder permanent state of health, typ-
ically for battery and SD-card status procure confidence in the whole system
integrity. MEMS based built-in sensors also provide best stability over time
with no recalibration needs.

Monitoring system condition permanently diagnosed ensuring

lowest down time and maintenance costs.

Local warning system

MR3000 strong motion devices are able to detect, record and automatically rai-
se alarms and activate relays in case of earthquakes. For better reliability and in
order to avoid spurious activation of the system, a trigger and alarm voting logic
(typically 2oo3, 2 out of 3 monitoring devices needed to detect an earth-
quake to activate the relays for example) can be easily programmed in the
Web User Interface.

Automated safe process without spurious activation of the system

with increased local safety.

outstanding durability
Housing made of cast aluminum IP67 protected and system built with rug-
gedized industrial grade components, achieving exceptional stability and
reliability on the long run.

Very low cost of ownership. Made for harsh environment usage.

10 BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider

SCS SYSCOM CLOUD SOFTWARE
Compatibility with:

MR3000C – MR3000TR – MR3000BLA – MR3000DMS – MR3000SB

softwarE http://scs.bartec-syscom.com Quick & Easy

to connect

Automated reporting

Management by projects

Data classification

SOH & Alarming

Syscom Cloud Software (SCS)
is compatible with all MR3000 product lines. It is fully designed by BARTEC SYSCOM and dedicated to vibration monitoring.
The SCS operates like a Software as a Service (SaaS) platform, providing all the benefits of such model. Its main features in-
clude plug & play M2M communications, management by projects, automatic reporting and post-processing capabilities such
as data categorization, data filtering, Fast Fourier Transform (FFT), signal integration & differentiation, data visualization and
graphical comparison with widely spread standards (DIN4150, SN640312, BS5228, French regulation and NP2074 among Remote MR setup
others).

This software solution remains open and therefore data ownership truly remain yours. In order to empower that, SCS includes
easy data sharing features with automatic reporting, specific project access with reader or viewer rights and data export
capabilities.

BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider 11

MAJOR BENEFITS SYSCOM CLOUD SOFTWARE

Flawless Connectivity
Simply create a secure link between the MR3000 and the SCS to have
an efficient remote data acquisition solution. Nothing else is need-
ed to have access to your data automatically uploaded to the software.
It requires no specific IT skills, it is very straightforward and all the servers and
maintenance are professionaly & securely managed by BARTEC SYSCOM.

Focus on your core business.

Remote data acquisition made efficient and accessible to everyone.

Valuable Information
Uploaded events can be classified and compared to widely used standards. Man-
age data coming from multiple MR3000 in a specific project, apply some filters
and select relevant files to be compared with the applicable regulation. This can
be entirely done online with the SCS.

Simply trustful information painlessly !

Decision Maker
What is data without being able to communicate, access and share them easily?
SCS allows you to visualize, share, export and automatically generate PDF reports
in near real time.

Take relevant actions quickly. Share your data with customers in one click.
Automatize standard periodic reporting with no human interference.

Competitive Advantage
Account creation is the only step to have access to these features, ensuring rap-
id deployment, painless upgrades, very low risk and low cost. Remote MR3000
setup of key parameters is also possible with the SCS, therefore no more visits
to monitoring sites are required.

Fully integrated monitoring solution. Quick return on investment.

12 BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider

APPLICATIONS with recommended monitoring solution
Typical setup for civil engineering and strong motion applications

Construction sites Excavation & Railways

Monitoring vibrations on a construction site and close by buildings using geo- Monitoring of rail induced vibrations or when using a tunnel boring machine
phone sensors for human comfort evaluation and structural health monitoring. (TBM) for new tubes with instrumentation on structures located above the path.

explosion monitoring
Monitoring blasts on quarries or mines and in the surrounding structures for
safety assessment following a shot.

Buildings monitoring dams monitoring

Permanent installation of strong motion recorders MR3000SB in a typical dai- Minimum configuration of MR3000DMS in a fiber optic star network setup
sy-chain configuration setup for high rise buildings. connected to the control room, for arch dams strong motion monitoring.

MR MR MR

MR

Control
Room
MR

BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider 13

SERVICES

BARTEC SYSCOM SERVICES

BARTEC SYSCOM has a very low vibration noise laboratory equipped with a
calibration bench and shakers. 100% of the production is calibrated and in-
spected with comparison to fully certified and traceable reference sensors.

Calibration

Every MR3000 instrument is repairable at the factory. BARTEC SYSCOM ensu-

res high spare parts availability over time.

Repair

Web based remote training sessions or local trainings are organized and any
of BARTEC SYSCOM customers can attend.

Training

Before & after sales technical support given by well-trained engineers is

available at BARTEC SYSCOM.

Technical support

Unlimited free firmware updates with new functionalities and bug fixes are con-
tinuously available, even for older MR3000 versions.

Firmware upgrades

14 BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider

BARTEC SYSCOM

SYSCOM Instruments SA is a subsidiary of BARTEC GROUP, a multinational manu-

facturer of industrial safety equipment. SYSCOM Instruments SA is a leading provider
of vibration and seismic monitoring equipment for civil engineering, strong-motion
monitoring and safety related markets, especially for NPP and LNG plants. SYSCOM
Instruments reputation rests on the reliability of its products, coming from a metic-
ulous control of every design and production aspects. SYSCOM Swiss facility, fully
ISO9001 certified, utilizes modern, automated production and test equipment to
assure cost-competitiveness and high quality products.
www.bartec-syscom.com

BARTEC GROUP

BARTEC is a world leading provider of industrial safety technology for use in hazard-
ous areas. Wherever substances such as flammable gases, vapors, mists or dust
can occur the components and system solutions developed by BARTEC prevent
explosions and ensure the safety of both people and the environment. The main
customers of the global corporate group include the oil and gas industry as well as
chemical, petrochemical and pharmaceutical companies from all around the world.

www.bartec.de

SALES NETWORK

BARTEC SYSCOM relies on a very well trained and specialized distribution net-
work worldwide. Please contact them freely to get the best advice about MR3000
product lines and premium local support. Refer to BARTEC SYSCOM website for a
complete list of representatives.

www.syscom.ch/representatives

BARTEC SYSCOM І www.bartec-syscom.com І Vibration monitoring solution provider 15

 UK-D-SYS13042017-04/2017-Marketing & Communications-410991

Your partner
for safety
technology.
Challenge us!

SYSCOM Instruments SA Rue de l’Industrie 21 1450 Sainte-Croix Switzerland Phone: +41 (0) 24 455 44 11 [email protected] www.bartec-syscom.com

All rights reserved. All information in this brochure is © SYSCOM instruments SA and is subject to modification without notice.
16