Scribd
Upload
94 views

Staircase PDF

The document provides design details for a staircase including dimensions, material properties, loads, and reinforcement requirements. The staircase is 3.63m long, 1.2m wide with 3.2m floor height and has 16 risers and 15 treads. Design calculations determine the required and provided slab thickness as 121mm and 127mm. Reinforcement includes #12 bars at 125mm spacing as main reinforcement and #8 bars at 200mm spacing as distribution reinforcement. The required development length is calculated as 680mm.

Uploaded by

Sanjeev Sanjeev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
94 views

Staircase PDF

The document provides design details for a staircase including dimensions, material properties, loads, and reinforcement requirements. The staircase is 3.63m long, 1.2m wide with 3.2m floor height and has 16 risers and 15 treads. Design calculations determine the required and provided slab thickness as 121mm and 127mm. Reinforcement includes #12 bars at 125mm spacing as main reinforcement and #8 bars at 200mm spacing as distribution reinforcement. The required development length is calculated as 680mm.

Uploaded by

Sanjeev Sanjeev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DESIGN OF STAIRCASE

Data
Internal Dimensions
Length = 3.63 m
Width = 1.2 m
Floor Height = 3.2 m
2
Fck = 20 N/mm
2
Fy = 500 N/mm
Riser = 200 mm
Tread = 250 mm
Landing width = 1200 mm
Effective Span = 3.83 m
No. of risers 16 Nos
No. of Tread 15 Nos

Design
d = 121 mm Required
D = 127 mm
d = 106 mm

Loads
2
DL of waist slab = 3.175 kN/m
2
DL on horizontal area = 4.07 kN/m
2
DL of steps = 2.5 kN/m
2
LL = 3 kN/m
2
FF = 1.5 kN/m
2
Total load = 11.07 kN/m Ld = 680 mm
2
Factored load = 16.6 kN/m

BM and SF
Mu = 30 kN-m
Vu = 32 kN
300
d from BM consideration 105 mm mm
Y8 @ 200 mm C/C (Distribution Reinforcement)
k = 2.709 Y12@125 mm C/C
pt = 0.772 % (Main Reinforcement)
2
Ast = 818 mm 127 mm
127 mm
Main Reinforcement
Dia = 12 mm DETAILING
Spacing = 138 mm
Spacing = 125 mm
Distribution Steel
2
Ast = 127 mm

Dia of bar = 8 mm
Spacing = 390 mm
Spacing = 200 mm
Development Length

Ld = Ld = (Ø x σs) / (4 x Tbd)
Therefore, Ld = 680 mm
Provide, Ld = 680 mm

You might also like