Scribd
Upload
61 views1 page

Isometric View: 9.5 M6 Thru (02) HOLES

This document provides the technical drawing for a load-cell mounting block. It specifies the dimensions, tolerances, and notes for the part. Key details include: - The block has overall dimensions of 140mm x 19mm x 19mm. - There are two 9.5mm diameter holes and one 3.2mm diameter hole located as shown. - Tolerances for tapping, free, and dowel holes are specified. - The material is specified as aluminum HE30. - The part number and revision are given.

Uploaded by

Chandru Christuraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views1 page

Isometric View: 9.5 M6 Thru (02) HOLES

This document provides the technical drawing for a load-cell mounting block. It specifies the dimensions, tolerances, and notes for the part. Key details include: - The block has overall dimensions of 140mm x 19mm x 19mm. - There are two 9.5mm diameter holes and one 3.2mm diameter hole located as shown. - Tolerances for tapping, free, and dowel holes are specified. - The material is specified as aluminum HE30. - The part number and revision are given.

Uploaded by

Chandru Christuraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1 9 10

A A

M6 THRU
(02) HOLES
9.5

19 19

3.2
3.2
30 80 ±0.1
19
140

ISOMETRIC VIEW This Drawing is property of Forbes & Company limited & must be returned on request
It must be not used, copied or lent for any purpose without authorization.

All Dimensions are in mm FORBES & COMPANY LIMITED I


NOTE:
Signature Date
FOR TAPPING CD, TOLERANCE TO BE MAINTAINED WITHIN u0.1 CAD SYS :- Creo B-13, MIDC WALUJ,
FOR FREE HOLE CD, TOLERANCE TO BE MAINTAINED WITHIN u0.2 Drawn :- SSJ 02/01/2020 AURANGABAD - 431133.
FOR DOWEL HOLE CD, TOLERANCE TO BE MAINTAINED WITHIN u0.02 Checked :- ABW 02/01/2020

Approved :- - - Project No.:- -


UNSPEFIED TOLERANCES / DEVIATION ANGULAR TOL.
Finish :- 140 X 19 X 19
J OVER - 6 30 120 400 1000 2000 - 10° 50° 100° Description:- LOAD-CELL-MTG-BLOCK
TO 6 30 120 400 1000 2000 3000 10° 50° 100° -
Machining:- ( ) Rev No.:- J
Material :- ALUMINIUM HE30 Drawing / Part No.:- PART NO: 2
DEVIATION ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2 ±1° ±30' ±20' ±10' -
REMOVE BURRS, SHARP EDGES & CORNERS
Weight :- 0.39 kg
IF IN DOUBT, ASK. DO NOT SCALE 0.5 X 45°, UNLESS OR OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN mm Rev.No Drawn Checked Description Date Heat Treatment:- - Scale:- NTS Projection:- - Sheet:- - Page No.:- 1 OF 1

1 2 3 4 5 6 7 8 9 10

You might also like