MAX.

SERVICE MAX. ANALYSIS SUPPORT

TYPE OS STRESS LOCATION IN THE DRAWING ALLOWABLE
CONDITION ALLOWABLE VALUES NUMBER (Kgf/mm2)

SHEAR STRESS 9.8 3.1 1004 CRASH BAR (RF BIN) 9.789312
13.9/14.4/14.5/14.6 13.9/14.4/14
0.1 736 C-CHANNEL (ROTARY PUMP MOUNTED))
AXIAL COMPRESSIVE STRESS (*) .5/14.6
C-CHANNEL (SOLENOID VALVES MOUNTED TOP
14.7 0 880 14.683968
AXIAL TENSILE STRESS HORIZONTAL C-CHANNEL)
MIDDLE C-CHANNEL(ROATRY PUMP MOUNTED;
1.0 0.1866 729 1
SIDE TO SIDE RUNNING)
STATIC
COMBINED AXIAL COMPRESSION MIDDLE C-CHANNEL(ROATRY PUMP MOUNTED;
1.0 0.2195 729 1
AND BENDING STRESS FACTOR SIDE TO SIDE RUNNING)
MIDDLE C-CHANNEL(ROATRY PUMP MOUNTED;
1.0 0.2195 729 1
SIDE TO SIDE RUNNING)

COMBINED AXIAL TENSION C-CHANNEL (ROTARY PUMP MOUNTED; FRONT

1.0 0.2597 752 1
AND BENDING STRESS FACTOR TO REAR RUNNING)

SHEAR STRESS 13.0 5.3 1004 CRASH BAR (RF BIN) 13.01978496
18.5/19.2/19.3/19.4/ RIGHT REAR CRASH BAR MOUNTING BRACKET AT 18.5/19.2/19
0.2 464
AXIAL COMPRESSIVE STRESS 19.5 (*) BOTTOM .3/19.4/19.5
RIGHT REAR CRASH BAR MOUNTING BRACKET AT
19.5 0.1 464 19.52967744
AXIAL TENSILE STRESS BOTTOM

1.0 0.3712 305 RIGHT FRONT VERTICAL SEVEND BEND AT MIDDLE 1

STATIC + OBE
COMBINED AXIAL COMPRESSION
1.0 0.4367 305 RIGHT FRONT VERTICAL SEVEND BEND AT MIDDLE 1
AND BENDING STRESS FACTOR

1.0 0.4367 305 RIGHT FRONT VERTICAL SEVEND BEND AT MIDDLE 1

COMBINED AXIAL TENSION

1.0 0.4368 305 RIGHT FRONT VERTICAL SEVEND BEND AT MIDDLE 1
AND BENDING STRESS FACTOR

14.7 6.4 110 RIGHT BOTTOM DEPTH MEMBER (SEVEN BEND) 14.683968
SHEAR STRESS
20.8/20.9/21
20.8/20.9/21.7/21.8/ RIGHT REAR CRASH BAR MOUNTING BRACKET AT
0.3 464 .7/21.8/21.9/
AXIAL COMPRESSIVE STRESS 21.9/22.0 (*) BOTTOM 22.0/
RIGHT REAR CRASH BAR MOUNTING BRACKET AT
22.0 0.3 464 BOTTOM 22.025952
AXIAL TENSILE STRESS
STATIC + BDBE 1.0 0.5937 305 RIGHT FRONT VERTICAL SEVEND BEND AT MIDDLE 1

COMBINED AXIAL COMPRESSION

AND BENDING STRESS FACTOR 1.0 0.6983 305 RIGHT FRONT VERTICAL SEVEND BEND AT MIDDLE 1

1.0 0.6983 305 RIGHT FRONT VERTICAL SEVEND BEND AT MIDDLE 1

COMBINED AXIAL TENSION

AND BENDING STRESS FACTOR 1.0 0.6985 305 RIGHT FRONT VERTICAL SEVEND BEND AT MIDDLE 1

* - FOR VARIOUS SLENDERNESS RATIO, ALLOWABLE COMPRESSIVE STRNGTH

OF THE BEAM WILL VARY

SHEAR STRESS 3.1 1004 5.1 1004 6.4 1004

AXIAL COMPRESSIVE STRESS 0.1 736 0.2 464 0.3 736
AXIAL TENSION STRESS 0 880 0.1 464 0.3 880
COMBINED AXIAL COMPRESSION 0.1883 729 0.4896 305 0.7552 729
AND BENDING STRESS FACTOR 0.2214 729 0.5759 305 0.8883 729
0.2214 729 0.5759 305 0.8884 729
COMBINED AXIAL TENSION 0.2615 752 0.5759 305 0.8883 752
AND BENDING STRESS FACTOR
 MAX. ANALYSIS ANALYSIS
MAX.
SERVICE LAYER ALLOWABLE VALUES VALUES LOCATION IN THE DRAWING ALLOWABLE
CONDITION (Kgf/mm2) (Kgf/mm2) (Kgf/mm2)
(Kgf/mm2)
(VON-MISES STRESS) (PRINCIPAL STRESS)

MIDDLE 10.78 0.1409 0.0880 SIDE COVER BOTTOM 10.78

STATIC TOP 16.17 0.5226 0.4736 TOP COVER 16.17

BOTTOM 16.17 0.5147 0.4790 TOP COVER 16.17

MIDDLE 14.34 0.2257 0.1667 SIDE COVER BOTTOM 14.34

STATIC + OBE TOP 21.56 3.2030 2.7340 SSU REAR DOOR 21.56

BOTTOM 21.56 3.2000 2.7310 SSU REAR DOOR 21.56

MIDDLE 16.17 0.3589 0.2791 SIDE COVER BOTTOM 16.17

STATIC + BDBE TOP 24.25 5.2830 4.5060 SSU REAR DOOR 24.25

BOTTOM 24.25 5.2770 4.5020 SSU REAR DOOR 24.25

Sy of IS:513 = 240 Mpa

Su of IS:513 = 370 Mpa
side cover bottom SIDE COVER BOTTOM
top cover TOP COVER 2Sy/3 Su/3.5
top cover TOP COVER 160 105.71 N/mm2
Sm
side cover bottom SIDE COVER BOTTOM 16.31552 10.77946 Kgf/mm2 minimum of 2Sy/3, Su/3.5
ssu rear door SSU REAR DOOR
ssu rear door SSU REAR DOOR
side cover bottom SIDE COVER BOTTOM
ssu rear door SSU REAR DOOR
ssu rear door SSU REAR DOOR