REINFORCED CONCRETE

Project Spreadsheets to BS 8110 COUNCIL

Client Advisory Group Made by Date Page
Location Edge Column B1 (akin to D&D) rmw 6-Nov-20 85
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 Checked Revision Job No
Originated from RCC51.xls v2.1 © 1999-2003 BCA for RCC chg - R68

INPUT 1-2
Location Edge Column B1 (akin to D&D) y concrete density, kN/m3 24.0
yfgk 1.40
Orientation A-B x x B-C H yfqk 1.60

y
n/a

Level 7 6 5 4 3 2 1
Dimensions
Spans Cl to Cl A-B m 5.00 5.00 5.00 5.00 5.00 5.00 5.00
B-C m 5.00 5.00 5.00 5.00 5.00 5.00 5.00
1-2 m 7.50 7.50 7.50 7.50 7.50 7.50 7.50
n/a m 0.00

Slab thickness (solid) mm 175 175 175 175 175 175 175
span direction,(II to) x, y or b x x x x x x x

Beams width A-B mm 300 300 300 300 300 300 300
depth o/a A-B mm 350 350 350 350 350 350 350
width B-C mm 300 300 300 300 300 300 300
depth o/a B-C mm 350 350 350 350 350 350 350
width 1-2 mm 300 300 300 300 300 300 300
depth o/a 1-2 mm 500 500 500 500 500 500 500
width n/a mm 0
depth o/a n/a mm 0

Column below (col above)

H (ll to yy) mm 300 300 300 300 300 300 300
B (ll to xx) mm 300 300 300 300 300 300 300
Height (fl. to floor.) m 4.00 4.00 4.00 4.00 4.00 4.00 4.00

Level 7 6 5 4 3 2 1 0 0 0
Loads (characteristic uno)
Slab (inc swt.) gk kN/m2 5.00 5.00 5.00 5.00 5.00 5.00 5.00
qk kN/m2 4.00 4.00 4.00 4.00 4.00 4.00 4.00

Beams (swt.) gk kN/m included included included included included included included included included included
line loads (-extra over slab loads and beam self weight)
A-B gk kN/m 5.0 5.0 5.0 5.0 5.0 5.0 5.0
qk kN/m 0.0
B-C gk kN/m 5.0 5.0 5.0 5.0 5.0 5.0 5.0
qk kN/m 0.0
1-2 gk kN/m 0.0
qk kN/m 0.0
n/a gk kN/m 0.0
qk kN/m 0.0

At column position, other applied loads (eg loads from cantilevers)

Gk kN (char) 0.0
Qk kN (char) 0.0
Mxx kNm (ult) 0.0
Myy kNm (ult) 0.0

Loads per floor

Floor Gk kN 133.8 133.8 133.8 133.8 133.8 133.8 133.8
Floor Qk kN 75.0 75.0 75.0 75.0 75.0 75.0 75.0
Column below Gk kN 8.6 8.6 8.6 8.6 8.6 8.6 8.6

OUTPUT Column level 7 to 6 6 to 5 5 to 4 4 to 3 3 to 2 2 to 1 Below 1

Cumulative loads in column.
Gk kN 142.5 284.9 427.4 569.9 712.3 854.8 997.3
Qk kN 75.0 150.0 225.0 300.0 375.0 450.0 525.0
Redn
factors Qk redn factor 1.0 0.9 0.8 0.7 0.6 0.6 0.6
OK*? Y Qk red* kN 75.0 135.0 180.0 210.0 225.0 270.0 315.0
N kN 319 615 886 1134 1357 1629 1900
Moments in column
about x-x Mxx top kNm 112.6 91.7 91.7 91.7 91.7 91.7 91.7
about y-y Myy top kNm 1.6 1.3 1.3 1.3 1.3 1.3 1.3
Mxx bottom kNm 91.7 91.7 91.7 91.7 91.7 91.7
Myy bottom kNm 1.3 1.3 1.3 1.3 1.3 1.3
 REINFORCED CONCRETE
Project Spreadsheets to BS 8110 COUNCIL
Client Advisory Group Made by Date Page
Location Edge Column B1 (akin to D&D) rmw 6-Nov-20 86
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO
AXES TO BS 8110:1997 Checked Revision Job No
Originated from RCC51.xls v2.1 © 1999-2003 BCA for RCC chg - R68

INPUT Location Edge Column B1 (akin to D&D)

Level considered: Bottom (Max N) Orientation 1-2
y
Dimensions about x-x about y-y
h (ll to yy) mm 300 - A-B x x B-C H
b (ll to xx) mm - 300
lo, clear height mm 3500 3650 y
ß value 0.90 0.90 n/a
Height (fl. to floor.) 4.00 m
Column properties
Braced or Unbraced? B or U B B fcu 35
fy 460
Loads cover to link mm 30
Axial N kN 1900 - Max sized main bar mm 32
Moments top kNm 91.7 1.3 Probable percentage As % 2.00%
bottom kNm 0.0 0.0 link diameter mm 8
OUTPUT
Design criteria
N kNm 1900
M kN 92.1
about X-X
PROOF
Slenderness Design moments (cont) about x-x about y-y
le mm 3150 3285 Design moments for unbraced columns
Slenderness 10.50 10.95 M2+100% Madd kNm n/a n/a
Limit for short column 15.0 15.0 eminN kNm n/a n/a
Design column as Short Maximum kNm n/a n/a
Column is Short Short
about x-x about y-y Design moments
kNm 91.7 1.3
Design moments about x-x about y-y
Min eccentricity, 0.05 h kNm 28.5 Short
Braced Braced
Madd n/a - short column
d mm 246 246
Nuz kN 2206.1 2206.1
Nbal kN 645.8 645.8 Biaxial bending
K 0.196 0.196 Mx/h' 0.373
b' or, if slender, h? - b' mm 246 246 My/b 0.005
ßa 0.082 0.089 Critical direction X-X
au mm 4.8 5.2
Madd kNm 0.0 0.0 N/bhfcu 0.60
Eqns 32-35 ok to use? ok ß 0.30
Braced columns M1 kNm 0.0 0.0
Mi kNm 55.0 0.8 Maximum design moment
Mi, (Mi=0 if Le/h>20) kNm 55.0 0.8 = 91.7+0.30*246/246*1.3
Mi, (Mi=0 if b/h>3) 55.0 0.8
= kNm 92.1 -
Design moments for braced columns
M2 kNm 91.7 1.3
Mi+Madd kNm 55.0 0.8
M1+Madd/2 kNm 0.0 0.0
eminN kNm 28.5 n/a
Maximum kNm 91.7 1.3
 REINFORCED CONCRETE
Project Spreadsheets to BS 8110 COUNCIL
Client Advisory Group Made by Date Page
Location Edge Column B1 (akin to D&D) rmw 6-Nov-20 87
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED
RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 Checked Revision Job No
Originated from RCC51.xls v2.1 © 1999-2003 BCA for RCC chg - R68

INPUT Level designed: Bottom (Max N)

Axial load, N 1900 kN fcu 35 N/mm²
Moment, M 92.1 kNm fy 460 N/mm²
about X-X axis fyv 460 N/mm²
Height, h (ll to yy, L'r to xx) 300 mm gm 1.05 steel
Breadth, b (ll to xx) 300 mm gm 1.5 concrete
Max bar diameter 32 mm Link Ø 8 mm
cover (to link) 30 mm
CALCULATIONS
from M As = {M - 0.67fcu.b.dc(h/2 - dc/2)}/[(h/2-d').(fsc+fst).gm]
from N As = (N - 0.67fcu.b.dc/gm) / (fsc - fst) As = Ast = Asc: dc=min(h,0.9x)
d' = 54 mm .67fcu/gm = 15.6 N/mm²
d= 246 mm fy/gm = 438.1 N/mm²
critical about X-X axis:…... h= 300 mm
b= 300 mm

from iteration, neutral axis depth, x, = 266.4 mm

dc 239.8 mm
0.67.fcu.b.dc/gm 1124.5 kN
Steel comp strain 0.00279
Steel tens strain -0.00027
Steel stress in comp. face, fsc 438 N/mm2 (Comp. stress in reinf.)
Steel stress in tensile face, fst -54 N/mm2 (Tensile stress in reinf.)
from M, As = 1578 mm2
from N, As = 1577 mm2 OK

As req'd = 1578mm² T&B:- PROVIDE 4T32

(ie 2T32 T&B - 1609mm²T&B) - 3.57% o/a - @192 cc.)
Links : - PROVIDE T8 @ 300
.
OK
Strain diagram Stress diagram
5 15.6 N/mm²

12 2

about X-X axis

9
Notes
7 Stresses in N/mm2

Compression +ve
Project Spreadsheets to BS 8110
Location
Edge Column B1 (akin to D&D) LOAD TAKE DOWN CALCULATIONS I Made by rmw Job No R68
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 6-Nov-20
Originated from RCC51.xls v2.1 © 1999-2003 BCA for RCC

Location Edge Column B1 (akin to D&D) Column loads - loads from slabs (including self weight) Location Edge Column B1 (akin to D&D)
Column loads - loads from slabs (including self weight)
7 6 5 4 3 2 1 0 0 0
A-B Gk kN =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
B-C Gk kN = 0.5x(0.0+0.0)/2*0.0/2*0.0 = 0.5x(0.0+0.0)/2*0.0/2*0.0 = 0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
1-2 Gk kN =(5.0+5.0)/2*7.5/2*5.0 =(5.0+5.0)/2*7.5/2*5.0 =(5.0+5.0)/2*7.5/2*5.0 =(5.0+5.0)/2*7.5/2*5.0 =(5.0+5.0)/2*7.5/2*5.0 =(5.0+5.0)/2*7.5/2*5.0 =(5.0+5.0)/2*7.5/2*5.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN =(5.0+5.0)/2*7.5/2*4.0 =(5.0+5.0)/2*7.5/2*4.0 =(5.0+5.0)/2*7.5/2*4.0 =(5.0+5.0)/2*7.5/2*4.0 =(5.0+5.0)/2*7.5/2*4.0 =(5.0+5.0)/2*7.5/2*4.0 =(5.0+5.0)/2*7.5/2*4.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
n/a Gk kN =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =(5.0+5.0)/2*0.0/2*5.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =(5.0+5.0)/2*0.0/2*4.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
ie
A-B Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1-2 Gk kN 93.8 93.8 93.8 93.8 93.8 93.8 93.8 0.0 0.0 0.0
Qk kN 75.0 75.0 75.0 75.0 75.0 75.0 75.0 0.0 0.0 0.0
n/a Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

Column loads - loads from beam line loads Column loads - loads from beam
line loads
7 6 5 4 3 2 1 0 0 0
A-B Gk kN = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
B-C Gk kN = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 5.0/2*5.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 5.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
1-2 Gk kN = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 7.5/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
n/a Gk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
ie
A-B Gk kN 12.5 12.5 12.5 12.5 12.5 12.5 12.5 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 12.5 12.5 12.5 12.5 12.5 12.5 12.5 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1-2 Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
n/a Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

Column loads - beams self

weight
Column loads - beams self weight 7 6 5 4 3 2 1 0 0 0
A-B gk kN/m
Gk kN = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2
B-C gk kN/m
Gk kN = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 300*175*24.0/10^6*5.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2
1-2 gk kN/m
Gk kN = 300*325*24.0/10^6*7.5/2 = 300*325*24.0/10^6*7.5/2 = 300*325*24.0/10^6*7.5/2 = 300*325*24.0/10^6*7.5/2 = 300*325*24.0/10^6*7.5/2 = 300*325*24.0/10^6*7.5/2 = 300*325*24.0/10^6*7.5/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2
n/a gk kN
Gk kN/m = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2

ie
A-B gk kN/m 1.26 1.26 1.26 1.26 1.26 1.26 1.26 0 0 0
Gk kN 3.2 3.2 3.2 3.2 3.2 3.2 3.2 0.0 0.0 0.0
B-C gk kN/m 1.26 1.26 1.26 1.26 1.26 1.26 1.26 0 0 0
Gk kN 3.2 3.2 3.2 3.2 3.2 3.2 3.2 0.0 0.0 0.0
1-2 gk kN/m 2.34 2.34 2.34 2.34 2.34 2.34 2.34 0 0 0
Gk kN 8.8 8.8 8.8 8.8 8.8 8.8 8.8 0.0 0.0 0.0
n/a gk kN 0 0 0 0 0 0 0 0 0 0
Gk kN/m 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

498062475.xls 11/06/202010:56:48 p4
Project Spreadsheets to BS 8110
Location
Edge Column B1 (akin to D&D) LOAD TAKE DOWN CALCULATIONS II sheet 2 of 2 Made by rmw Job No R68
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 6-Nov-20
Originated from RCC51.xls v2.1 © 1999-2003 BCA for RCC

TOTAL LOADS Location Edge Column B1 (akin to D&D) TOTAL LOADS Location Edge Column B1 (akin to D&D)

7 6 5 4 3 2 1 0 0 0
A-B Gk kN = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
B-C Gk kN = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +12.5 +3.2 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
1-2 Gk kN = 93.8 +0.0 +8.8 = 93.8 +0.0 +8.8 = 93.8 +0.0 +8.8 = 93.8 +0.0 +8.8 = 93.8 +0.0 +8.8 = 93.8 +0.0 +8.8 = 93.8 +0.0 +8.8 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 75.0 +0.0 = 75.0 +0.0 = 75.0 +0.0 = 75.0 +0.0 = 75.0 +0.0 = 75.0 +0.0 = 75.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
n/a Gk kN = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
ie A-B Gk kN 15.7 15.7 15.7 15.7 15.7 15.7 15.7 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 15.7 15.7 15.7 15.7 15.7 15.7 15.7 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1-2 Gk kN 102.5 102.5 102.5 102.5 102.5 102.5 102.5 0.0 0.0 0.0
Qk kN 75.0 75.0 75.0 75.0 75.0 75.0 75.0 0.0 0.0 0.0
n/a Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

FIXED END MOMENTS FIXED END MOMENTS

7 6 5 4 3 2 1 0 0 0
A-B (about yy) Gk kNm 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8
N kNm (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8
B-C (about yy) Gk kNm 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8 15.7*2*5.0/8
N kNm (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8 (1.4*15.7+1.6*0.0)*2*5.0/8
1-2 (about xx) Gk kNm 102.5*2*7.5/8 102.5*2*7.5/8 102.5*2*7.5/8 102.5*2*7.5/8 102.5*2*7.5/8 102.5*2*7.5/8 102.5*2*7.5/8
N kNm (1.4*102.5+1.6*75.0)*2*7.5/8 (1.4*102.5+1.6*75.0)*2*7.5/8 (1.4*102.5+1.6*75.0)*2*7.5/8 (1.4*102.5+1.6*75.0)*2*7.5/8 (1.4*102.5+1.6*75.0)*2*7.5/8 (1.4*102.5+1.6*75.0)*2*7.5/8 (1.4*102.5+1.6*75.0)*2*7.5/8
n/a (about xx) Gk kNm
N kNm

A-B (about yy) Gk kNm 19.6 19.6 19.6 19.6 19.6 19.6 19.6 0.0 0.0 0.0
N kNm 27.4 27.4 27.4 27.4 27.4 27.4 27.4 0.0 0.0 0.0
B-C (about yy) Gk kNm 19.6 19.6 19.6 19.6 19.6 19.6 19.6 0.0 0.0 0.0
N kNm 27.4 27.4 27.4 27.4 27.4 27.4 27.4 0.0 0.0 0.0
1-2 (about xx) Gk kNm 192.2 192.2 192.2 192.2 192.2 192.2 192.2 0.0 0.0 0.0
N kNm 494.1 494.1 494.1 494.1 494.1 494.1 494.1 0.0 0.0 0.0
n/a (about xx) Gk kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
N kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

FEMxx about x-x kNm MAX[abs(494.1-0.0),abs(0.0- MAX[abs(494.1-0.0),abs(0.0- MAX[abs(494.1-0.0),abs(0.0- MAX[abs(494.1-0.0),abs(0.0- MAX[abs(494.1-0.0),abs(0.0- MAX[abs(494.1-0.0),abs(0.0- MAX[abs(494.1-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0-
192.2)] 192.2)] 192.2)] 192.2)] 192.2)] 192.2)] 192.2)] 0.0)] 0.0)] 0.0)]
FEMyy about y-y kNm MAX[abs(27.4-19.6),abs(27.4- MAX[abs(27.4-19.6),abs(27.4- MAX[abs(27.4-19.6),abs(27.4- MAX[abs(27.4-19.6),abs(27.4- MAX[abs(27.4-19.6),abs(27.4- MAX[abs(27.4-19.6),abs(27.4- MAX[abs(27.4-19.6),abs(27.4- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0-
19.6)] 19.6)] 19.6)] 19.6)] 19.6)] 19.6)] 19.6)] 0.0)] 0.0)] 0.0)]

FEMxx about x-x kNm 494.1 494.1 494.1 494.1 494.1 494.1 494.1 0.0 0.0 0.0
FEMyy about y-y kNm 7.8 7.8 7.8 7.8 7.8 7.8 7.8 0.0 0.0 0.0

Moments in column
Moments in column
Mxx col above kNm 494.1*0/(0+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 0.0*17/(17+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)
about x-x col below kNm 494.1*17/(0+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 494.1*17/(17+17+57+0) 0.0*0/(17+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)

Mxx col above kNm 0.0 91.7 91.7 91.7 91.7 91.7 91.7 0.0 0.0 0.0
about x-x col below kNm 112.6 91.7 91.7 91.7 91.7 91.7 91.7 0.0 0.0 0.0

Myy col above kNm 7.8*0/(0+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 0.0*17/(17+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)
about y-y col below kNm 7.8*17/(0+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 7.8*17/(17+17+33+33) 0.0*0/(17+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)

Myy col above kNm 0.0 1.3 1.3 1.3 1.3 1.3 1.3 0.0 0.0 0.0
about y-y col below kNm 1.6 1.3 1.3 1.3 1.3 1.3 1.3 0.0 0.0 0.0

498062475.xls 11/06/202010:56:48 p5
Project Spreadsheets to BS 8110 Made by rmw Job No R68
Location Edge Column B1 (akin to D&D) BEAM/SLAB & COLUMN STIFFNESSES 6-Nov-20
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 p1 OF 1
Originated from RCC51.xls v2.1 © 1999-2003 BCA for RCC

Level 7 6 5 4 3 2 1 Level 7 6 5 4 3 2 1

A-B Span 5.000 5.000 5.000 5.000 5.000 5.000 5.000 0.000 0.000 0.000 B-C Span 5.000 5.000 5.000 5.000 5.000 5.000 5.000 0.000 0.000 0.000

slab depth m 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.000 0.000 0.000 slab depth m 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.000 0.000 0.000
width (o/a) m 3.450 3.450 3.450 3.450 3.450 3.450 3.450 0.000 0.000 0.000 width (o/a) m 3.450 3.450 3.450 3.450 3.450 3.450 3.450 0.000 0.000 0.000
A m2 0.604 0.604 0.604 0.604 0.604 0.604 0.604 0.000 0.000 0.000 0 A m2 0.604 0.604 0.604 0.604 0.604 0.604 0.604 0.000 0.000 0.000
Ay m3 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.000 0.000 0.000 Ay m3 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.000 0.000 0.000
Ay^2 m4 0.0046 0.0046 0.0046 0.0046 0.0046 0.0046 0.0046 0.0000 0.0000 0.0000 Ay^2 m4 0.0046 0.0046 0.0046 0.0046 0.0046 0.0046 0.0046 0.0000 0.0000 0.0000
Ina m 4
0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0000 0.0000 0.0000 Ina m 4
0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0000 0.0000 0.0000

Beam depth m 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.000 0.000 0.000 Beam depth m 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.000 0.000 0.000
width (o/a) m 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.000 0.000 0.000 width (o/a) m 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.000 0.000 0.000
A m 2
0.105 0.105 0.105 0.105 0.105 0.105 0.105 0.000 0.000 0.000 A m 2
0.105 0.105 0.105 0.105 0.105 0.105 0.105 0.000 0.000 0.000
Ay m3 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.000 0.000 0.000 Ay m3 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.000 0.000 0.000
Ay^2 m4 0.0032 0.0032 0.0032 0.0032 0.0032 0.0032 0.0032 0.0000 0.0000 0.0000 Ay^2 m4 0.0032 0.0032 0.0032 0.0032 0.0032 0.0032 0.0032 0.0000 0.0000 0.0000
Ina m4 0.0011 0.0011 0.0011 0.0011 0.0011 0.0011 0.0011 0.0000 0.0000 0.0000 Ina m4 0.0011 0.0011 0.0011 0.0011 0.0011 0.0011 0.0011 0.0000 0.0000 0.0000

T-beam Ybar m 4
0.1005 0.1005 0.1005 0.1005 0.1005 0.1005 0.1005 0.0000 0.0000 0.0000 T-beam Ybar m 4
0.1005 0.1005 0.1005 0.1005 0.1005 0.1005 0.1005 0.0000 0.0000 0.0000
Ina m4 0.0033 0.0033 0.0033 0.0033 0.0033 0.0033 0.0033 0.0000 0.0000 0.0000 Ina m4 0.0033 0.0033 0.0033 0.0033 0.0033 0.0033 0.0033 0.0000 0.0000 0.0000
k m 3
0.000660 0.000660 0.000660 0.000660 0.000660 0.000660 0.000660 0.000000 0.000000 0.000000 k m 3
0.000660 0.000660 0.000660 0.000660 0.000660 0.000660 0.000660 0.00E+00 0.00E+00 0.00E+00
k/2 m3 0.000330 0.000330 0.000330 0.000330 0.000330 0.000330 0.000330 0.000000 0.000000 0.000000 k/2 m3 0.000330 0.000330 0.000330 0.000330 0.000330 0.000330 0.000330 0.00E+00 0.00E+00 0.00E+00
k/2 dm3 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.000 0.000 0.000 k/2 dm3 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.000 0.000 0.000

Level 7 6 5 4 3 2 1 Level 7 6 5 4 3 2 1

1-2 Span 7.500 7.500 7.500 7.500 7.500 7.500 7.500 0.000 0.000 0.000 n/a Span 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000

slab depth m 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.000 0.000 0.000 slab depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
width (o/a) m 4.700 4.700 4.700 4.700 4.700 4.700 4.700 0.000 0.000 0.000 width (o/a) m 5.000 5.000 5.000 5.000 5.000 5.000 5.000 0.000 0.000 0.000
A m 2
0.823 0.823 0.823 0.823 0.823 0.823 0.823 0.000 0.000 0.000 A m 2
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Ay m3 0.072 0.072 0.072 0.072 0.072 0.072 0.072 0.000 0.000 0.000 Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Ay^2 m 4
0.0063 0.0063 0.0063 0.0063 0.0063 0.0063 0.0063 0.0000 0.0000 0.0000 Ay^2 m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
Ina m4 0.0021 0.0021 0.0021 0.0021 0.0021 0.0021 0.0021 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000

Beam depth m 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.000 0.000 0.000 Beam depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
width (o/a) m 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.000 0.000 0.000 width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
A m2 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.000 0.000 0.000 A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Ay m3 0.038 0.038 0.038 0.038 0.038 0.038 0.038 0.000 0.000 0.000 Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Ay^2 m4 0.0094 0.0094 0.0094 0.0094 0.0094 0.0094 0.0094 0.0000 0.0000 0.0000 Ay^2 m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
Ina m 4
0.0031 0.0031 0.0031 0.0031 0.0031 0.0031 0.0031 0.0000 0.0000 0.0000 Ina m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000

T-beam Ybar m4 0.1126 0.1126 0.1126 0.1126 0.1126 0.1126 0.1126 0.0000 0.0000 0.0000 T-beam Ybar m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
Ina m4 0.0086 0.0086 0.0086 0.0086 0.0086 0.0086 0.0086 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
k m3 0.001143 0.001143 0.001143 0.001143 0.001143 0.001143 0.001143 0.000000 0.000000 0.000000 k m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
k/2 m3 0.000572 0.000572 0.000572 0.000572 0.000572 0.000572 0.000572 0.000000 0.000000 0.000000 k/2 m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
k/2 dm 3
0.572 0.572 0.572 0.572 0.572 0.572 0.572 0.000 0.000 0.000 k/2 dm 3
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000

COLUMN STIFFNESSES

BELOW LEVEL 7 6 5 4 3 2 1

about xx I m4 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0000 0.0000 0.0000
k dm3 0.169 0.169 0.169 0.169 0.169 0.169 0.169 0.000 0.000 0.000
k above 7 dm3 0.000

about yy I m4 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0007 0.0000 0.0000 0.0000
k dm3 0.169 0.169 0.169 0.169 0.169 0.169 0.169 0.000 0.000 0.000
k above 7 dm3 0.0000

498062475.xls 11/06/2020 6
Disclaimer
All advice or information from the British Cement Association and/or Reinforced Concrete Council is intended for those
will evaluate the significance and limitations of its contents and take responsibility for its use and application. No liab
(including that for negligence) for any loss resulting from such advice or information is accepted by the BCA, RCC or
subcontractors, suppliers or advisors. Users should note that all BCA software and publications are subject to revision f
time to time and should therefore ensure that they are in possession of the latest version.

This spreadsheet should be used in compliance with the accompanying publication 'Spreadsheets for concrete design t
8110 and EC2' available from British Cement Association, Telford Avenue, Crowthorne, Berkshire RG45 6YS.

Status of spreadsheet
Public release version.

Revision history RCC51 Column Load Take-down & Design.xls

Date Version
22-Jan-03 RCC51 v2.1
11-Oct-02 RCC51 v2.0

10-Oct-02 RCC51 v1.7

1-Oct-02 RCC51 v1.6

3-Apr-02 RCC51 v1.5

28-Mar-01 RCC51 v1.4

7-Jun-00 RCC51 v1.3

27-Mar-00 RCC51 v1.2

28-Feb-00 RCC51 v1.1

6-Aug-99 RCC51 v1.0
mation from the British Cement Association and/or Reinforced Concrete Council is intended for those who
gnificance and limitations of its contents and take responsibility for its use and application. No liability
negligence) for any loss resulting from such advice or information is accepted by the BCA, RCC or their
pliers or advisors. Users should note that all BCA software and publications are subject to revision from
ould therefore ensure that they are in possession of the latest version.

hould be used in compliance with the accompanying publication 'Spreadsheets for concrete design to BS
lable from British Cement Association, Telford Avenue, Crowthorne, Berkshire RG45 6YS.

This spreadsheet is shareware. It may be distributed freely, but may not be used
for commercial purposes until the user has registered with the RCC.
RCC51 Column Load Take-down & Design.xls

Action Size (kB)

DETR logo replaced by DTI. 464
Version 2 enhancements 485
Mods for balanced sections at CDES!R38:AL38; Q65:T65 & I33
398
Mods at LOADTD!S36 etc. for convenience.

LOADTD!: C73:S73 : Modifications to suit BS6399 Pt1 1996. New note at

S39 re base fixity.(G Jack)
398
CDES! Chart at Z8 reactivated. Modifications to R42:Y42 to help iteration
procedure. Note re Walls at K22 (G Jack)

Cells U2:AC2 on DESMMNTS corrected to eliminate reducing values. 396

Function in DESMMNTS!AD3:AD8 revised so correct Lo etc used for

appropriate storey.
394
Input for column sizes now in table in LOADTD!G36:P37. Not CDES!
Minor formatting changes in LOADTD!, DESMMNTS! & CDES!.

gm included in DESMMNTS!G43, DESMMNTS!G14 & H14 corrected to use

393
Lo for appropriate storey.
Mods to ltdcalc!G123:P133 & Stiffs!D65:O70 to corrcct referencing of
stiffnesses (G Dosser).LOADTD!f36:F38 made active. CDES!AB66:AG77 412
unprotected to make combo box work.
LOADTD line 33 made taller.
411
CDES!G22 made active
 First public release.
411
Includes b version comments