Scribd
Upload
38 views

Unix Passwd Reset PDF

Uploaded by

Franck
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views

Unix Passwd Reset PDF

Uploaded by

Franck
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

How To: Reset Admin/Root Password

Anyone who has been in the IT business for any length of time knows literally hundreds of passwords.
As we get older though it becomes harder and harder to remember each password and continue with
safe security practices. Many companies have gone to centralized password systems. But such
software is not always compatible with every OS there is. In such cases as the four year old FreeBSD
server sitting in the corner that serves one application. So, here is a complete list on how to reset the
root password or administrative user on many operating systems.Keep in mind that these instructions
assume you have physical access to the server in question.

FreeBSD (all versions)

1. Turn Server off. Hitting the Power Button should start a shutdown cycle.
2. Hit ESC when the OS starts booting
3. Choose option 4 to boot into Single User Mode
4. When asked for a shell, hit enter to default to /bin/sh
5. Once the machine is booted and you see the hash, type
1. #mount -u /
2. #mount -a
6. Type #passwd to reset the password
7. Enter new password and confirm it. “pam_chauthok(): error in service module” means that the
filesystem is not mounted. Follow step 5 again.
8. Type reboot or hit the power button again to reboot the machine normally.

Linux (Lilo Loader)

1. Reboot machine
2. Hit Esc to get to boot prompt if it doesn’t to it automatically
3. type: linux single
4. type: passwrd
5. Enter in and confirm new password
6. type: sync
7. type: reboot

Linux (GRUB loader)

1. Reboot machine
2. Hit Esc to get to boot prompt if it doesn’t to it automatically
3. Select the Kernal. Hopefully there is only one or two and the names are descriptive. But any
one SHOULD work.
4. type: e
5. Select the line that starts with “Kernal”
6. type: e (again)
7. Add the letter s (in lower case) to the very end of the line
8. Hit Enter
9. type the letter b to start booting
10. Mount the drives type:
1. mount -t proc proc /proc
2. mount -o remount,rw /
11. type: passwd
12. Enter in new password and confirm it
13. type: sync
14. type: reboot

OS X (All Versions) OS X has two ways to reset the Administrator Password.

Option 1:

1. Find the computer’s original boot disc. These are system specific. If it’s not available, any OS X
retail boot disk will work. The wrong disc will give an error message.
2. Boot off the disc. Accomplish by holding down the c key during power up.
3. At the Menu go to: Utilities
4. Choose “Reset Password”
5. Enter in new password and confirm
6. Click on Installer
7. Choose Quit

Option 2:

1. Hold Down Apple+S while booting computer


2. Type: sh /etc/rc
3. Type: passwd root (if that doesn’t work try admin or administrator instead of root)
4. Enter in new password and confirm
5. Type: reboot

Solaris (On Sun Hardware)

You must have the Solaris CDRom to do this. If you do not have physical media, get it here. Note that
this download is for Ver10, so may not work on older versions.

1. Reboot Machine
2. Hit Stop +A to get to the OK prompt
3. Type: boot cdrom -s
4. Once booted off the CDRom, type: mount /dev/disk/c0t0d0s0 /a (those are Zeros)
5. Type: vi /a/etc/shadow
6. Use the h,j,k,l keys to move around in vi (or go here for more commands)
7. On the second line, which says root:<bunch of random letters/numbers> type: dd
8. Type: :wq! to save and quit out of vi
9. Type: umount /a
10. Type: boot ok -s (to boot into single user mode)
11. Type: passwrd
12. Enter in new password and confirm it
13. Type: reboot

Note that many Solaris systems may have mirrored volumes, a volume manager or other method of
copying the full filesystem. If this is the case these instructions will need to be followed for both volumes,
otherwise corruption can easily occur.

Solaris (i386/Intel Hardware)


Again you should have the CDRomto boot off of.

1. Reboot Computer
2. Enter Bios and Change Boot Order to CDRom first if needed
3. Boot Computer
4. On Boot Menu choose Single User mode, which is Option 6 on Solaris 10
5. Choose Yes when asked to mount the root filesystem
1. If you choose “No” it can still be mounted with the same command, /dev/disk/c0t0d0s0
/a (those are Zeros)
6. Type: vi /a/etc/shadow
7. Use the h,j,k,l keys to move around in vi (or go here for more commands)
8. On the second line, which says root:<bunch of random letters/numbers> type: dd (to delete
whole line)
9. Type: :wq! to save and quit out of vi
10. Typ: cd /
11. Type: umount /a
12. Type: init s
13. At password prompt hit enter key
14. Type: passwrd root
15. Enter in new password and confirm it
16. Type: reboot

You might also like