0% found this document useful (0 votes)
93 views26 pages

TSKS14: Multiple Antenna Communications

This document provides an introduction to multiple antenna communications. It discusses three main benefits: beamforming gain, spatial diversity, and spatial multiplexing. The course will cover the history and theory behind these topics, as well as point-to-point and multi-user MIMO systems. Key concepts include channel capacity, mutual information, and the Gaussian and complex Gaussian distributions.

Uploaded by

nitish
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
93 views26 pages

TSKS14: Multiple Antenna Communications

This document provides an introduction to multiple antenna communications. It discusses three main benefits: beamforming gain, spatial diversity, and spatial multiplexing. The course will cover the history and theory behind these topics, as well as point-to-point and multi-user MIMO systems. Key concepts include channel capacity, mutual information, and the Gaussian and complex Gaussian distributions.

Uploaded by

nitish
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 26

TSKS14

Multiple Antenna
Communications
Lecture 1, 2020

Emil Björnson
TSKS14 Multiple Antenna Communications 2020-03-27 2

Three main benefits of multiple antenna communications


1. Beamforming gain
2. Spatial diversity
3. Spatial multiplexing

The course will cover all of them:


• First historical perspective
• Then the theory behind them
TSKS14 Multiple Antenna Communications 2020-03-27 3

Constructive and destructive interference


• One signal:
2 sin 2𝜋𝑡
4 5
(Normalization: ∫3 2 sin 2𝜋𝑡 𝑑𝑡 = 1)

• Two signals:
sin 2𝜋𝑡 + sin(2𝜋𝑡 − 𝜃)
Power depends on the phase difference 𝜃
(time delay)
TSKS14 Multiple Antenna Communications 2020-03-27 4

Omni-directional radiation
𝑀 = 1 antenna

Powers spread out as a sphere


• Received power decays as
1/distance2
TSKS14 Multiple Antenna Communications 2020-03-27 5

Directive radiation – Beamforming gain


𝑀 = 6 antennas

Power directed towards receiver


• Constructive interference Beamforming
• Send signals with time delays
• Needs to know “direction”
Two options:
• 6 times larger received power
• Use 1/6 of power to achieve
same received power
TSKS14 Multiple Antenna Communications 2020-03-27 6

History: Beamforming
• Directional communication
• E.F.W. Alexanderson, ”Transatlantic Radio Communication”,
Trans. AIEE, 1919.

• Directive radiation pattern


• Constructive/destructive interference patterns
• Energy savings or better performance

Called beamforming gain


TSKS14 Multiple Antenna Communications 2020-03-27 7

Multipath Propagation
sin(2𝜋𝑡 − 𝜃)

Transmitter sin 2𝜋𝑡 Receiver

Multipath fading:
Received signal: sin 2𝜋𝑡 + sin(2𝜋𝑡 − 𝜃) Add construtively or
destructively depending on 𝜃
TSKS14 Multiple Antenna Communications 2020-03-27 8

History: Spatial diversity


• Diversity combining
• D.G. Brennan, “Linear diversity combining
techniques,” Proc. IRE, 1959

• Protect against fading/noise


• Multiple antennas with independent
observations
• Small risk that multiple observations are all bad
• Improve reliability

Called diversity gain


TSKS14 Multiple Antenna Communications 2020-03-27 9

Cellular networks
• Designed for mobile telephone systems
• Bullington, K. (1953). “Frequency economy
in mobile radio bands”. The Bell System
Technical Journal.
• Schulte, H. J. and W. A. Cornell (1960).
“Multi-area mobile telephone system”. IEEE
Trans. Veh. Technol.

• Reuse of spectrum in space:


• Densify as usage increases
• Control interference by fractional
spectrum reuse, power control
TSKS14 Multiple Antenna Communications 2020-03-27 10

History: Space division multiple access (SDMA)


• Multiple user communication
• S. C. Swales et al., “The Performance Enhancement of
Multibeam Adaptive Base-Station Antennas for Cellular
Land Mobile Radio Systems” Trans. on Vehicular
Technology, 1990.

• Spatial multiplexing of users


• Serve multiple users on same time and frequency
• Handle more users per base station
• Exists in 4G/5G and Wi-Fi

Called multiplexing gain


TSKS14 Multiple Antenna Communications 2020-03-27 11

History: Point-to-point multi-antenna links


• Point-to-point multiple-input
multiple-output (MIMO)
• G. G. Raleigh and J. M. Cioffi, “Spatio-
temporal coding for wireless
communications,” Globecom 1996.

• Multiple streams per user


• Increase capacity (bit/s) per user
• Requires multiple paths
• Exists in 4G/5G and Wi-Fi

Also called multiplexing gain


TSKS14 Multiple Antenna Communications 2020-03-27 12

Outline of the course


• Lecture 1:
• History of multiple antenna communications
• Channel capacity for single-antenna channels Based on lecture note document:
“Introduction to Multiple Antenna
• Basic multi–antenna channels (Lecture 2) Communications”
• Diversity and ergodic capacity (Lecture 3)
• Point-to-point MIMO (Lecture 4)

• Multi-user MIMO (Lectures 5-12) Based on the book


• Capacity bounds, Channel estimation, “Fundamentals of Massive MIMO”
Power control, etc.
TSKS14 Multiple Antenna Communications 2020-03-27 13

Example: Additive White Gaussian Noise (AWGN) Channel

𝑥 + 𝑦 =𝑥+𝑛

• Noise: 𝑛 ∼ 𝑁(0, 𝑁3/2)


• Energy per symbol: 𝐸 𝑥 5 ≤𝑞
• 𝑥, 𝑦, 𝑛 real valued
TSKS14 Multiple Antenna Communications 2020-03-27 14

How to measure performance?


• Data packet:

Information symbols

• Characterized by
• How many symbols the packet contains
• How many information bits these symbols represent
(determined by the modulation and coding scheme)
• Probability of incorrect decoding at the receiver
TSKS14 Multiple Antenna Communications 2020-03-27 15

Channel capacity
• Channel capacity
• Random variables 𝑋 and 𝑌 𝑥 Channel 𝑦
• Channel described by conditional distribution
𝑝P|R 𝑦|𝑥

• Channel coding theorem


• 𝐶 [bit/channel use] is the capacity of the channel if:
For any given 𝛿 > 0 and 𝛾 > 0,
there exist a channel coding codebook of a finite length 𝑁 that has rate
𝑅 = 𝐶 − 𝛿 and offers an error probability 𝑃 error ≤ 𝛾
TSKS14 Multiple Antenna Communications 2020-03-27 16

Passband and baseband signals


• Bandwidth: Distance from smallest to largest frequency

𝑓 𝑓
𝐵 𝑓_ 𝐵 𝐵 0 𝐵
𝑓_ − 𝑓_ + − +
2 2 2 2
^
Bandwidth (passband): 𝐵 Bandwidth (baseband):
5
Real-valued signal Complex-valued signal

Described by 2𝐵 real samples/s Described by 𝐵 complex samples/s

These samples are used to convey information


TSKS14 Multiple Antenna Communications 2020-03-27 17

Gaussian Distribution
• 𝑥 is zero-mean Gaussian distributed, 𝑥 ∼ 𝑁(0, 𝜎 5)

• Probability density function (PDF): 0.4

1 cd 0.35
b d
𝑝R 𝑥 = 𝑒 5e
2𝜋𝜎 5 0.3

0.25

0.2

0.15

0.1

Properties: 𝐸 𝑥 = 0, 𝐸 𝑥 5 = 𝜎 5 0.05

0
-5 0 5
TSKS14 Multiple Antenna Communications 2020-03-27 18

Complex Gaussian Distribution


• Consider independent 𝑥f , 𝑥g ∼ 𝑁(0, 𝜎 5/2)
• 𝑥 = 𝑥f + 𝑗𝑥g is circularly symmetric complex
Gaussian distributed,
𝑥 ∼ 𝐶𝑁(0, 𝜎 5), with
d d
1 c i 1 cj
b d b
𝑝R 𝑥 = 𝑒 e 𝑒 ed
𝜋𝜎 5 d 𝜋𝜎 5
1 b cd
= 5 𝑒 e
𝜋𝜎

Properties: 𝐸 𝑥 = 0, 𝐸 𝑥 5 = 𝜎5
TSKS14 Multiple Antenna Communications 2020-03-27 19

Capacity and mutual information


• Channel capacity
𝐶 = max 𝐼(𝑥; 𝑦) 𝑥 Channel 𝑦
lm (c)

• Mutual information: 𝐼 𝑥; 𝑦 = ℎ 𝑦 − ℎ(𝑦|𝑥)


• Differential entropy:
ℎ 𝑦 = −𝐸 log 5 𝑝P 𝑦 ≤ log 5 𝜋𝑒Var 𝑦
• Conditional diff. entropy:
ℎ 𝑦|𝑥 = −𝐸 log 5 𝑝P|R (𝑦|𝑥) Equality if
Complex Gaussian
TSKS14 Multiple Antenna Communications 2020-03-27 20

Differential entropy ℎ 𝑥 of 𝑥 ∼ 𝐶𝑁(0, 𝑝)


• Direct computation
1 b cd 1 b cd
ℎ 𝑥 = −r 𝑒 l log 5 𝑒 l 𝑑𝑥
c∈ℂ 𝜋𝑝 𝜋𝑝
1 b cd 𝑥5
=r 𝑒 l
log 5 𝜋𝑝 + log 5 𝑒 𝑑𝑥
c∈ℂ 𝜋𝑝 𝑝
d cd
1 b cl log 5 𝑒 𝑥5 b l
= log 5 𝜋𝑝 r 𝑒 𝑑𝑥 + r 𝑒 𝑑𝑥
c∈ℂ 𝜋𝑝 𝑝 c∈ℂ 𝜋𝑝
log 5 𝑒
= log 5 𝜋𝑝 ⋅ 1 + 𝐸 𝑥 5 = log 5 𝜋𝑒𝑝
𝑝
TSKS14 Multiple Antenna Communications 2020-03-27 21

Capacity of complex AWGN channel


𝑛 ∼ 𝐶𝑁(0, 𝑁3)

𝑥 + 𝑦 =𝑥+𝑛

• Recall: 𝐼 𝑥; 𝑦 = ℎ 𝑦 − ℎ(𝑦|𝑥)
ℎ 𝑦 𝑥 = 𝑦|𝑥 ∼ 𝐶𝑁(𝑥, 𝑁3) = log 5 𝜋𝑒𝑁3
• Mutual information maximized by 𝑥 ∼ 𝐶𝑁(0, 𝑞)
ℎ 𝑦 ≤ 𝑦 = 𝑥 + 𝑛 ∼ 𝐶𝑁(0, 𝑞 + 𝑁3) = log 5 𝜋𝑒(𝑞 + 𝑁3 )

• Capacity:
𝑞
𝐶 = ℎ 𝑦 − ℎ 𝑦 𝑥 = log 5 1+
𝑁3
TSKS14 Multiple Antenna Communications 2020-03-27 22

Point-to-point scalar channel


• Continuous-time AWGN channel with channel response 𝑔 ∈ ℂ
• Bandwidth 𝐵 (Hz)
• Power 𝑃 (Watt)
• Noise power spectral density 𝑁3 (Watt/Hz)
• Sampling: 2𝐵 real samples/s, 𝐵 complex samples/s:
𝑦 𝑙 =𝑔⋅𝑥 𝑙 +𝑛 𝑙 , 𝑙 = sample index
• Energy per sample: 𝑞 = 𝑃/𝐵
• 𝑥 𝑙 ∼ 𝐶𝑁(0, 𝑃/𝐵)
• 𝑛 𝑙 ∼ 𝐶𝑁(0, 𝑁3) Complex Gaussian signals are capacity achieving
TSKS14 Multiple Antenna Communications 2020-03-27 23

Point-to-point scalar channel: Capacity


• Sampling: 2𝐵 real samples/s, 𝐵 complex samples/s:
𝑦 𝑙 = 𝑔 ⋅ 𝑥 𝑙 + 𝑛[𝑙]
• 𝑥 𝑙 ∼ 𝐶𝑁(0, 𝑃/𝐵)
• 𝑛 𝑙 ∼ 𝐶𝑁(0, 𝑁3)

• Capacity:
• Depends on 𝑃 and 𝐵
|}d
C = log 5 1 + ^~ bits per complex sample

|}d
𝐶 = 𝐵 ⋅ log 5 1 + bits per second
^~•
TSKS14 Multiple Antenna Communications 2020-03-27 24

𝑃
Capacity behaviors 𝑁3
log 5 𝑒
8
• SNR:
𝑃 7
𝐵𝑁3 6
Power limited region

5
• log 5 1 + SNR
• Linear for small SNR 4

• Almost flat for large SNR 3 Bandwidth


2 limited
region
1
|}d
Assumption: = 5 ⋅ 10ƒ Hz
~•
0
0 20 40 60 80 100
TSKS14 Multiple Antenna Communications 2020-03-27 25

Summary
• Capacity of point-to-point channel:
𝑃
𝐶 = 𝐵 ⋅ log 5 1+ bits per second
𝐵𝑁3

|
• SNR per degree of freedom (symbol): ^~•
• Behaviors
• Low SNR: 𝐶 grows linearly with power 𝑃
• High SNR: 𝐶 grows linearly with bandwidth 𝐵
End of Lecture 1

TSKS14 Multiple Antenna


Communications

You might also like