Scribd
Upload
27 views1 page

Sri Ramanjar Engineering College Department of Ece Two Mark Test 1

This document contains a 10 question, 2 mark test from the Department of Electronics and Communication Engineering at SRI RAMANJAR Engineering College. The test covers topics related to op-amps including slew rate, rectifiers, maximum frequency of a sine wave output given slew rate, ideal vs practical op-amp characteristics, circuits for peak detection and integration. It provides the date of the test and instructs students to answer all 10 questions.

Uploaded by

Suguna Priya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
27 views1 page

Sri Ramanjar Engineering College Department of Ece Two Mark Test 1

This document contains a 10 question, 2 mark test from the Department of Electronics and Communication Engineering at SRI RAMANJAR Engineering College. The test covers topics related to op-amps including slew rate, rectifiers, maximum frequency of a sine wave output given slew rate, ideal vs practical op-amp characteristics, circuits for peak detection and integration. It provides the date of the test and instructs students to answer all 10 questions.

Uploaded by

Suguna Priya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

SRI RAMANJAR ENGINEERING COLLEGE

DEPARTMENT OF ECE

TWO MARK TEST 1

DATE: 18.02.20 Mark: 20

Answer All Questions: (2x10=20)

1. Define slew rate and Cause of Slew rate.


2. What is difference between normal rectifier and precision rectifier.
3. What is the maximum frequency for sine wave output voltage 10V peak to peak with an op amp
whose slew rate is 1V/µs.
4. Differentiate the ideal and practical characteristics of an opamp.
5. Calculate the output voltage for the circuit shown below

6. Draw the circuit diagram of a comparator. Mention its application.


7. Draw the circuit diagram of peak detector with waveform a
8. What is the need for converting a first order filter into a second order filter.
9. State the limitation of an ideal integrator.
10. Give the circuit for V-I and I-V convertor.

ALL THE BEST

You might also like