9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

↔ Home Howtos & Tutorials Linux Shell Scripting Tutorial RSS Donate Search

PMP® Certi cation Training

29 hours of high-quality e-learning content. 35 contact hours/PDUs. Enroll now!

simplilearn.com OPEN

30 Linux System Monitoring Tools Every SysAdmin Should

Know
Author: Vivek Gite
Last updated: January 8, 2018
355 comments

N eed to monitor Linux server performance? Try these built-in commands and a few add-on tools. Most distributions come
with tons of Linux monitoring tools. These tools provide metrics which can be used to get information about system
activities. You can use these tools to find the possible causes of a performance problem. The commands discussed below are
some of the most fundamental commands when it comes to system analysis and debugging Linux server issues such as:

ADVERTISEMENTS

1. Finding out system bottlenecks

2. Disk (storage) bottlenecks

3. CPU and memory bottlenecks

4. Network bottleneck.
https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 1/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

1. top – Process activity monitoring command

top command display Linux processes. It provides a dynamic real-time view of a running system i.e. actual process activity. By
default, it displays the most CPU-intensive tasks running on the server and updates the list every five seconds.

Fig.01: Linux top command

Commonly Used Hot Keys With top Linux monitoring tools

Here is a list of useful hot keys:

Hot Key Usage

t Displays summary information off and on.
m Displays memory information off and on.
Sorts the display by top consumers of various system resources.
A Useful for quick identification of performance-hungry tasks on
a system.
Enters an interactive configuration screen for top. Helpful for
f
setting up top for a specific task.
o Enables you to interactively select the ordering within top.
r Issues renice command.
k Issues kill command.
z Turn on or off color/mono

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 2/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

How do I Find Out Linux CPU Utilization?

2. vmstat – Virtual memory statistics

The vmstat command reports information about processes, memory, paging, block IO, traps, and cpu activity.

# vmstat 3

Sample Outputs:

procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------

r b swpd free buff cache si so bi bo in cs us sy id wa st
0 0 0 2540988 522188 5130400 0 0 2 32 4 2 4 1 96 0 0
1 0 0 2540988 522188 5130400 0 0 0 720 1199 665 1 0 99 0 0
0 0 0 2540956 522188 5130400 0 0 0 0 1151 1569 4 1 95 0 0
0 0 0 2540956 522188 5130500 0 0 0 6 1117 439 1 0 99 0 0
0 0 0 2540940 522188 5130512 0 0 0 536 1189 932 1 0 98 0 0
0 0 0 2538444 522188 5130588 0 0 0 0 1187 1417 4 1 96 0 0
0 0 0 2490060 522188 5130640 0 0 0 18 1253 1123 5 1 94 0 0

Display Memory Utilization Slabinfo

# vmstat -m

Get Information About Active / Inactive Memory Pages

# vmstat -a

How do I find out Linux Resource utilization to detect system bottlenecks?

3. w – Find out who is logged on and what they are doing

w command displays information about the users currently on the machine, and their processes.

# w username
# w vivek

Sample Outputs:

17:58:47 up 5 days, 20:28, 2 users, load average: 0.36, 0.26, 0.24

USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 3/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

root pts/0 10.1.3.145 14:55 5.00s 0.04s 0.02s vim /etc/resolv.conf

root pts/1 10.1.3.145 17:43 0.00s 0.03s 0.00s w

4. uptime – Tell how long the Linux system has been running
uptime command can be used to see how long the server has been running. The current time, how long the system has been
running, how many users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes.

# uptime

Output:

18:02:41 up 41 days, 23:42, 1 user, load average: 0.00, 0.00, 0.00

1 can be considered as optimal load value. The load can change from system to system. For a single CPU system 1 – 3 and SMP
systems 6-10 load value might be acceptable.

5. ps – Displays the Linux processes

ps command will report a snapshot of the current processes. To select all processes use the -A or -e option:

# ps -A

Sample Outputs:

PID TTY TIME CMD

1 ? 00:00:02 init
2 ? 00:00:02 migration/0
3 ? 00:00:01 ksoftirqd/0
4 ? 00:00:00 watchdog/0
5 ? 00:00:00 migration/1
6 ? 00:00:15 ksoftirqd/1
....
.....
4881 ? 00:53:28 java
4885 tty1 00:00:00 mingetty
4886 tty2 00:00:00 mingetty
4887 tty3 00:00:00 mingetty
4888 tty4 00:00:00 mingetty
4891 tty5 00:00:00 mingetty
4892 tty6 00:00:00 mingetty
4893 ttyS1 00:00:00 agetty

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 4/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

12853 ? 00:00:00 cifsoplockd

12854 ? 00:00:00 cifsdnotifyd
14231 ? 00:10:34 lighttpd
14232 ? 00:00:00 php-cgi
54981 pts/0 00:00:00 vim
55465 ? 00:00:00 php-cgi
55546 ? 00:00:00 bind9-snmp-stat
55704 pts/1 00:00:00 ps

ps is just like top but provides more information.

Show Long Format Output

# ps -Al

To turn on extra full mode (it will show command line arguments passed to process):

# ps -AlF

Display Threads ( LWP and NLWP)

# ps -AlFH

Watch Threads After Processes

# ps -AlLm

Print All Process On The Server

# ps ax
# ps axu

Want To Print A Process Tree?

# ps -ejH
# ps axjf
# pstree

Get Security Information of Linux Process

# ps -eo euser,ruser,suser,fuser,f,comm,label
# ps axZ

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 5/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
# ps -eM

Let Us Print Every Process Running As User Vivek

# ps -U vivek -u vivek u

Configure ps Command Output In a User-Defined Format

# ps -eo pid,tid,class,rtprio,ni,pri,psr,pcpu,stat,wchan:14,comm
# ps axo stat,euid,ruid,tty,tpgid,sess,pgrp,ppid,pid,pcpu,comm
# ps -eopid,tt,user,fname,tmout,f,wchan

Try To Display Only The Process IDs of Lighttpd

# ps -C lighttpd -o pid=

OR

# pgrep lighttpd

OR

# pgrep -u vivek php-cgi

Print The Name of PID 55977

# ps -p 55977 -o comm=

Top 10 Memory Consuming Process

# ps -auxf | sort -nr -k 4 | head -10

Show Us Top 10 CPU Consuming Process

# ps -auxf | sort -nr -k 3 | head -10

Show All Running Processes in Linux

6. free – Show Linux server memory usage

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 6/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

free command shows the total amount of free and used physical and swap memory in the system, as well as the buffers used by
the kernel.

# free

Sample Output:

total used free shared buffers cached

Mem: 12302896 9739664 2563232 0 523124 5154740
-/+ buffers/cache: 4061800 8241096
Swap: 1052248 0 1052248

1. Linux Find Out Virtual Memory PAGESIZE

2. Linux Limit CPU Usage Per Process

3. How much RAM does my Ubuntu / Fedora Linux desktop PC have?

7. iostat – Montor Linux average CPU load and disk activity

iostat command report Central Processing Unit (CPU) statistics and input/output statistics for devices, partitions and network
filesystems (NFS).

# iostat

Sample Outputs:

Linux 2.6.18-128.1.14.el5 (www03.nixcraft.in) 06/26/2009

avg-cpu: %user %nice %system %iowait %steal %idle

3.50 0.09 0.51 0.03 0.00 95.86

Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn

sda 22.04 31.88 512.03 16193351 260102868
sda1 0.00 0.00 0.00 2166 180
sda2 22.04 31.87 512.03 16189010 260102688
sda3 0.00 0.00 0.00 1615 0

Linux Track NFS Directory / Disk I/O Stats

8. sar – Monitor, collect and report Linux system activity

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 7/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

sar command used to collect, report, and save system activity information. To see network counter, enter:

# sar -n DEV | more

The network counters from the 24th:

# sar -n DEV -f /var/log/sa/sa24 | more

You can also display real time usage using sar:

# sar 4 5

Sample Outputs:

Linux 2.6.18-128.1.14.el5 (www03.nixcraft.in) 06/26/2009

06:45:12 PM CPU %user %nice %system %iowait %steal %idle

06:45:16 PM all 2.00 0.00 0.22 0.00 0.00 97.78
06:45:20 PM all 2.07 0.00 0.38 0.03 0.00 97.52
06:45:24 PM all 0.94 0.00 0.28 0.00 0.00 98.78
06:45:28 PM all 1.56 0.00 0.22 0.00 0.00 98.22
06:45:32 PM all 3.53 0.00 0.25 0.03 0.00 96.19
Average: all 2.02 0.00 0.27 0.01 0.00 97.70

How to collect Linux system utilization data into a file

How To Create sar Graphs With kSar To Identifying Linux Bottlenecks

9. mpstat – Monitor multiprocessor usage on Linux

mpstat command displays activities for each available processor, processor 0 being the first one. mpstat -P ALL to display
average CPU utilization per processor:

# mpstat -P ALL

Sample Output:

Linux 2.6.18-128.1.14.el5 (www03.nixcraft.in) 06/26/2009

06:48:11 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
06:48:11 PM all 3.50 0.09 0.34 0.03 0.01 0.17 0.00 95.86 1218.04
06:48:11 PM 0 3.44 0.08 0.31 0.02 0.00 0.12 0.00 96.04 1000.31
06:48:11 PM 1 3.10 0.08 0.32 0.09 0.02 0.11 0.00 96.28 34.93

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 8/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
06:48:11 PM 2 4.16 0.11 0.36 0.02 0.00 0.11 0.00 95.25 0.00
06:48:11 PM 3 3.77 0.11 0.38 0.03 0.01 0.24 0.00 95.46 44.80
06:48:11 PM 4 2.96 0.07 0.29 0.04 0.02 0.10 0.00 96.52 25.91
06:48:11 PM 5 3.26 0.08 0.28 0.03 0.01 0.10 0.00 96.23 14.98
06:48:11 PM 6 4.00 0.10 0.34 0.01 0.00 0.13 0.00 95.42 3.75
06:48:11 PM 7 3.30 0.11 0.39 0.03 0.01 0.46 0.00 95.69 76.89

Linux display each multiple SMP CPU processors utilization individually.

10. pmap – Montor process memory usage on Linux

pmap command report memory map of a process. Use this command to find out causes of memory bottlenecks.

# pmap -d PID

To display process memory information for pid # 47394, enter:

# pmap -d 47394

Sample Outputs:

47394: /usr/bin/php-cgi
Address Kbytes Mode Offset Device Mapping
0000000000400000 2584 r-x-- 0000000000000000 008:00002 php-cgi
0000000000886000 140 rw--- 0000000000286000 008:00002 php-cgi
00000000008a9000 52 rw--- 00000000008a9000 000:00000 [ anon ]
0000000000aa8000 76 rw--- 00000000002a8000 008:00002 php-cgi
000000000f678000 1980 rw--- 000000000f678000 000:00000 [ anon ]
000000314a600000 112 r-x-- 0000000000000000 008:00002 ld-2.5.so
000000314a81b000 4 r---- 000000000001b000 008:00002 ld-2.5.so
000000314a81c000 4 rw--- 000000000001c000 008:00002 ld-2.5.so
000000314aa00000 1328 r-x-- 0000000000000000 008:00002 libc-2.5.so
000000314ab4c000 2048 ----- 000000000014c000 008:00002 libc-2.5.so
.....
......
..
00002af8d48fd000 4 rw--- 0000000000006000 008:00002 xsl.so
00002af8d490c000 40 r-x-- 0000000000000000 008:00002 libnss_files-2.5.so
00002af8d4916000 2044 ----- 000000000000a000 008:00002 libnss_files-2.5.so
00002af8d4b15000 4 r---- 0000000000009000 008:00002 libnss_files-2.5.so
00002af8d4b16000 4 rw--- 000000000000a000 008:00002 libnss_files-2.5.so
00002af8d4b17000 768000 rw-s- 0000000000000000 000:00009 zero (deleted)

00007fffc95fe000 84 rw--- 00007ffffffea000 000:00000 [ stack ]

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 9/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
00007fffc95fe000 84 rw 00007ffffffea000 000:00000 [ stack ]
ffffffffff600000 8192 ----- 0000000000000000 000:00000 [ anon ]
mapped: 933712K writeable/private: 4304K shared: 768000K

The last line is very important:

mapped: 933712K total amount of memory mapped to files

writeable/private: 4304K the amount of private address space

shared: 768000K the amount of address space this process is sharing with others

Linux find the memory used by a program / process using pmap command

11. netstat – Linux network and statistics monitoring tool

netstat command displays network connections, routing tables, interface statistics, masquerade connections, and multicast
memberships.

# netstat -tulpn
# netstat -nat

12. ss – Network Statistics

ss command use to dump socket statistics. It allows showing information similar to netstat. Please note that the netstat is mostly
obsolete. Hence you need to use ss command. To ss all TCP and UDP sockets on Linux:

# ss -t -a

OR

# ss -u -a

Show all TCP sockets with process SELinux security contexts:

# ss -t -a -Z

See the following resources about ss and netstat commands:

ss: Display Linux TCP / UDP Network and Socket Information

Get Detailed Information About Particular IP address Connections Using netstat Command

13. iptraf – Get real-time network statistics on Linux

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 10/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

iptraf command is interactive colorful IP LAN monitor. It is an ncurses-based IP LAN monitor that generates various network
statistics including TCP info, UDP counts, ICMP and OSPF information, Ethernet load info, node stats, IP checksum errors, and
others. It can provide the following info in easy to read format:

Network traffic statistics by TCP connection

IP traffic statistics by network interface

Network traffic statistics by protocol

Network traffic statistics by TCP/UDP port and by packet size

Network traffic statistics by Layer2 address

Fig.02: General interface statistics: IP traffic statistics by network interface

Ad

Teknotelecom SIP LTE GSM - SIP Monitoring for Service

teknotelecom.com Visit Site

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 11/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Fig.03 Network traffic statistics by TCP connection

Install IPTraf on a Centos / RHEL / Fedora Linux To Get Network Statistics

14. tcpdump – Detailed network traffic analysis

tcpdump command is simple command that dump traffic on a network. However, you need good understanding of TCP/IP
protocol to utilize this tool. For.e.g to display traffic info about DNS, enter:

# tcpdump -i eth1 'udp port 53'

View all IPv4 HTTP packets to and from port 80, i.e. print only packets that contain data, not, for example, SYN and FIN packets
and ACK-only packets, enter:

# tcpdump 'tcp port 80 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)'

Show all FTP session to 202.54.1.5, enter:

# tcpdump -i eth1 'dst 202.54.1.5 and (port 21 or 20'

Print all HTTP session to 192.168.1.5:

# tcpdump -ni eth0 'dst 192.168.1.5 and tcp and port http'

Use wireshark to view detailed information about files, enter:

# tcpdump -n -i eth1 -s 0 -w output.txt src or dst port 80

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 12/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

15. iotop – Linux I/O monitor

iotop command monitor, I/O usage information, using the Linux kernel. It shows a table of current I/O usage sorted by
processes or threads on the server.

$ sudo iotop

Sample outputs:

Linux iotop: Check What’s Stressing And Increasing Load On Your Hard Disks

16. htop – interactive process viewer

htop is a free and open source ncurses-based process viewer for Linux. It is much better than top command. Very easy to use.
You can select processes for killing or renicing without using their PIDs or leaving htop interface.

$ htop

Sample outputs:

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 13/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

CentOS / RHEL: Install htop An Interactive Text-mode Process Viewer

17. atop – Advanced Linux system & process monitor

atop is a very powerful and an interactive monitor to view the load on a Linux system. It displays the most critical hardware
resources from a performance point of view. You can quickly see CPU, memory, disk and network performance. It shows which
processes are responsible for the indicated load concerning CPU and memory load on a process level.

$ atop

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 14/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

CentOS / RHEL: Install atop (Advanced System & Process Monitor) Utility

18. ac and lastcomm –

You must monitor process and login activity on your Linux server. The psacct or acct package contains several utilities for
monitoring process activities, including:

1. ac command : Show statistics about users’ connect time

2. lastcomm command : Show info about about previously executed commands

3. accton command : Turns process accounting on or off

4. sa command : Summarizes accounting information

How to keep a detailed audit trail of what’s being done on your Linux systems

19. monit – Process supervision

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 15/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Monit is a free and open source software that acts as process supervision. It comes with the ability to restart services which have
failed. You can use Systemd, daemontools or any other such tool for the same purpose. This tutorial shows how to install and
configure monit as Process supervision on Debian or Ubuntu Linux.

20. nethogs- Find out PIDs that using most bandwidth on Linux
NetHogs is a small but handy net top tool. It groups bandwidth by process name such as Firefox, wget and so on. If there is a
sudden burst of network traffic, start NetHogs. You will see which PID is causing bandwidth surge.

$ sudo nethogs

Linux: See Bandwidth Usage Per Process With Nethogs Tool

21. iftop – Show bandwidth usage on an interface by host

iftop command listens to network traffic on a given interface name such as eth0. It displays a table of current bandwidth usage
by pairs of hosts.

$ sudo iftop

22. vnstat – A console-based network traffic monitor

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 16/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

vnstat is easy to use console-based network traffic monitor for Linux. It keeps a log of hourly, daily and monthly network traffic
for the selected interface(s).

$ vnstat

Keeping a Log Of Daily Network Traffic for ADSL or Dedicated Remote Linux Server

CentOS / RHEL: Install vnStat Network Traffic Monitor To Keep a Log Of Daily Traffic

CentOS / RHEL: View Vnstat Graphs Using PHP Web Interface Frontend

23. nmon – Linux systems administrator, tuner, benchmark tool

nmon is a Linux sysadmin’s ultimate tool for the tunning purpose. It can show CPU, memory, network, disks, file systems, NFS,
top process resources and partition information from the cli.

$ nmon

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 17/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Install and Use nmon Tool To Monitor Linux Systems Performance

24. glances – Keep an eye on Linux system

glances is an open source cross-platform monitoring tool. It provides tons of information on the small screen. It can also work in
client/server mode.

$ glances

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 18/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Linux: Keep An Eye On Your System With Glances Monitor

25. strace – Monitor system calls on Linux

Want to trace Linux system calls and signals? Try strace command. This is useful for debugging webserver and other server
problems. See how to use to trace the process and see What it is doing.

26. /proc/ file system – Various Linux kernel statistics

/proc file system provides detailed information about various hardware devices and other Linux kernel information. See Linux
kernel /proc documentations for further details. Common /proc examples:

# cat /proc/cpuinfo
# cat /proc/meminfo
# cat /proc/zoneinfo
# cat /proc/mounts

27. Nagios – Linux server/network monitoring

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 19/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Nagios is a popular open source computer system and network monitoring application software. You can easily monitor all your
hosts, network equipment and services. It can send alert when things go wrong and again when they get better. FAN is “Fully
Automated Nagios”. FAN goals are to provide a Nagios installation including most tools provided by the Nagios Community.
FAN provides a CDRom image in the standard ISO format, making it easy to easilly install a Nagios server. Added to this, a wide
bunch of tools are including to the distribution, in order to improve the user experience around Nagios.

28. Cacti – Web-based Linux monitoring tool

Cacti is a complete network graphing solution designed to harness the power of RRDTool’s data storage and graphing
functionality. Cacti provides a fast poller, advanced graph templating, multiple data acquisition methods, and user management
features out of the box. All of this is wrapped in an intuitive, easy to use interface that makes sense for LAN-sized installations
up to complex networks with hundreds of devices. It can provide data about network, CPU, memory, logged in users, Apache,
DNS servers and much more. See how to install and configure Cacti network graphing tool under CentOS / RHEL.

29. KDE System Guard – Real-time Linux systems reporting and graphing
KSysguard is a network enabled task and system monitor application for KDE desktop. This tool can be run over ssh session. It
provides lots of features such as a client/server architecture that enables monitoring of local and remote hosts. The graphical
front end uses so-called sensors to retrieve the information it displays. A sensor can return simple values or more complex
information like tables. For each type of information, one or more displays are provided. Displays are organized in worksheets
that can be saved and loaded independently from each other. So, KSysguard is not only a simple task manager but also a very
powerful tool to control large server farms.

Fig.05 KDE System Guard {Image credit: Wikipedia}

See the KSysguard handbook for detailed usage.

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 20/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

30. Gnome Linux system monitor

The System Monitor application enables you to display basic system information and monitor system processes, usage of system
resources, and file systems. You can also use System Monitor to modify the behavior of your system. Although not as powerful as
the KDE System Guard, it provides the basic information which may be useful for new users:

Displays various basic information about the computer’s hardware and software.

Linux Kernel version

GNOME version

Hardware

Installed memory

Processors and speeds

System Status

Currently available disk space

Processes

Memory and swap space

Network usage

File Systems

Lists all mounted filesystems along with basic information about each.

Fig.06 The Gnome System Monitor application

Bonus: Additional Tools

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 21/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

A few more tools:

nmap – scan your server for open ports.

lsof – list open files, network connections and much more.

ntop web based tool – ntop is the best tool to see network usage in a way similar to what top command does for processes i.e.
it is network traffic monitoring software. You can see network status, protocol wise distribution of traffic for UDP, TCP,
DNS, HTTP and other protocols.

Conky – Another good monitoring tool for the X Window System. It is highly configurable and is able to monitor many
system variables including the status of the CPU, memory, swap space, disk storage, temperatures, processes, network
interfaces, battery power, system messages, e-mail inboxes etc.

GKrellM – It can be used to monitor the status of CPUs, main memory, hard disks, network interfaces, local and remote
mailboxes, and many other things.

mtr – mtr combines the functionality of the traceroute and ping programs in a single network diagnostic tool.

vtop – graphical terminal activity monitor on Linux

gtop – Awesome system monitoring dashboard for Linux/macOS Unix terminal

Did I miss something? Please add your favorite system motoring tool in the comments.

🐧 Get the latest tutorials on SysAdmin, Linux/Unix, Open Source & DevOps topics via:
RSS feed or Weekly email newsletter

Share to Twitter • Facebook • 355 comments... add one ↓

READ NEXT

40 Linux Server Hardening Security Tips [2019 edition]

30 Best Sources For Linux / *BSD / Unix Documentation On the Web

How do I Find Out Linux CPU Utilization?

Linux 25 PHP Security Best Practices For Sys Admins

How To Create sar Graphs With kSar To Identifying Linux Bottlenecks

The Novice Guide To Buying A Linux Laptop

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 22/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Top 25 Nginx Web Server Best Security Practices

Category List of Unix and Linux commands

File Management cat

Firewall CentOS 8 • OpenSUSE • RHEL 8 • Ubuntu 16.04 • Ubuntu 18.04 • Ubuntu 20.04

Network Utilities dig • host • ip • nmap

OpenVPN CentOS 7 • CentOS 8 • Debian 10 • Debian 8/9 • Ubuntu 18.04 • Ubuntu 20.04

Package Manager apk • apt

Processes Management bg • chroot • cron • disown • fg • jobs • killall • kill • pidof • pstree • pwdx • time

Searching grep • whereis • which

User Information groups • id • lastcomm • last • lid/libuser-lid • logname • members • users • whoami • who • w

WireGuard VPN CentOS 8 • Debian 10 • Firewall • Ubuntu 20.04

ADVERTISEMENTS

355 comments… add one ↓

VonSkippy
Jun 27, 2009 @ 5:10

Pretty much common knowledge (or should be) but handy to have listed all in one place.

reply link

Jim (JR)
Mar 21, 2011 @ 3:30

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 23/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

(quote)
Pretty much common knowledge. . . .
(/quote)

Yea, right!
I’ve been around the block two or three times – and a number of these are familiar to me – but some of the ways they’re used
here were not. Also a fair number of these were absolutely brand-new – and they look damned useful!

I am so going to book-mark this page it isn’t funny! It’s likely that I will want to spread this URL around like the Flu as well. . .
.😀

@Vivek
*GREAT* list – for those of us who are mere mortals. . . .

Jim (JR)

reply link

Steve
Aug 3, 2011 @ 7:28

For someone with the common knowledge, why would this be handy? I mean, if you already know/use these, then why would
you need a page detailing them?

reply link

Mike Williams
Aug 15, 2011 @ 22:35

Because a lot of us have to live with faulty memory modules, Steve.

I do agree with you too.:This knowledge isn’t that common outside the comic book fraternity.

reply link

farseas
Jan 8, 2013 @ 17:29

If you did a lot of sysadmin you would already know the answer to that question.

reply link

robb
Jun 27, 2009 @ 8:29

yeap most of them are must-have tools.

good job of collecting them in a post.

reply link

Chris

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 24/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Jun 27, 2009 @ 8:37

Nice list. For systems with just a few nodes I recommend Munin. It’s easy to install and configure. My favorite tool for
monitoring a linux cluster is Ganglia.

P.S. I think you should change this “#2: vmstat – Network traffic statistics by TCP connection …”

reply link

ftaurino
Jun 27, 2009 @ 9:09

another useful tool is dstat , which combines vmstat, iostat, ifstat, netstat information and more. but this is a very useful list with
some interesting examples!

reply link

James
Jun 27, 2009 @ 9:23

pocess or process. haha, i love typos

reply link

Sohrab Khan
Mar 15, 2011 @ 9:09

Dear i am learning the Linux pl z help me, I you have any useful notes pl z sent it to my E-mail.

Thanks

reply link

vasu
Mar 21, 2011 @ 5:43

In my system booting time it showing error fsck is fails. plz login as root…….– how to repair or check linux os using fsck
command plz help me

reply link

darkdragn
May 31, 2011 @ 7:14

Most of the time that happens if the fsck operation requires human interaction, which the boot fsck doesn’t have. Just
restart it, if you don’t normally get a grub delay the hold down the shift key to get one, if you do then just select recovery
mode, or single user mode, it depends on your distro. It’s the same thing in all, just tripping single user mode with a
kernel arg, but it will let you boot, and run fsck on unmounted partitions. If it is your root partition, you may need to boot
from an external medium, unless you have a kick ass initrd, lol.

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 25/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Artur
Jun 27, 2009 @ 9:40

What about Munin ? Lots easier and lighter than Cacti.

reply link

nig belamp
Dec 7, 2010 @ 16:21

How can you even compare munin to cacti…stfu your a tool.

reply link

PC4N6
Apr 20, 2011 @ 19:53

Uhm, geez, this isn’t blogspot. Head over there if you have an uncontrollable need to flame people above your level of
understanding…

reply link

RB-211
May 13, 2011 @ 12:57

Wow, that was a bit harsh.

reply link

grammer nazi
Jul 24, 2011 @ 13:54

it is you’re – you are a tool. Please when randomly slamming someones post to feel better about yourself, at least you proper
grammer. Then at least you sound like an intelligent a55h0le. 😛

reply link

Jeff
Aug 9, 2011 @ 18:07

Sarcastic pro’s, N00bs, flaming, harsh language, grammar nazis. All we need now is a Hitler comparison and we have the
full set. Who’s up for a ban?

Also: before stuff can become common knowledge you’ll first have to encounter it at least once. Like here in this nice list.
Thanks for sharing!

reply link

David
Aug 25, 2011 @ 15:05

A ban? Censorship! You Nazi!

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 26/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Roberto
Sep 9, 2011 @ 18:08

That’s “grammar”, unless you’re talking about the actor who plays Frasier on Cheers. 😛

reply link

Fireman
Oct 17, 2011 @ 23:39

Let me go ahead and re-write your comment, grammer nazi. It seems you have quite a few errors.

“It is ‘you’re–you are’ a tool. Please, when randomly slamming someone’s post to feel better about yourself, at least use
proper grammar. Then, at least, you sound like an intelligent a55h0le.”

In the future, I would recommend proof-reading your own posts before you arrogantly correct others. I counted at least
six mistakes in your “correction.” Have a nice day! 🙂

reply link

flame on!
Dec 4, 2011 @ 20:05

Vivek does a great job, as usual. But, thanks for the laughs, guys!

reply link

Raj
Jun 27, 2009 @ 10:13

Nice list, worth bookmarking!

reply link

kaosmonk
Jun 27, 2009 @ 10:53

Once again, great article!!

reply link

Amr El-Sharnoby
Jun 27, 2009 @ 11:07

I can see that the best tool to monitor processes , CPU, memeory and disk bottleneck at once is atop …

But the tool itself can cause a lot of trouble in heavily loaded servers and it enables process accounting and has a service running
all the time …

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 27/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

To use it efficiently on RHEL , CentOS;

1- install rpmforge repo
2- # yum install atop
3- # killalll atop
4- # chkconfig atop off
5- # rm -rf /tmp/atop.d/ /var/log/atop/
6- then don’t directly run “atop” command , but instead run it as follows;
# ATOPACCT=” atop

This tool has saved me hundreds of hours really! and helped me to diagnose bottlenecks and solve them that couldn’t otherwise
be easily detected and would need many different tools

reply link

🐧 nixCraft
Jun 27, 2009 @ 13:01

@Chris / James

Thanks for the heads-up!

reply link

Solaris
Jun 27, 2009 @ 13:26

Great post, also great reference.

reply link

Cristiano
Jun 27, 2009 @ 13:57

You probably wanna add IFTOP tool, its really simple and light, very useful when u need to have a last moment remote access to
a server to see hows the trific going.

reply link

Peko
Jun 27, 2009 @ 15:40

Yeah, well why a so good admin (I dig(g) your site) won’t you use spelling checkers?
Typo #2 Web-based __Monitioring__ Tool

reply link

paul tergeist
Jun 27, 2009 @ 16:17

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 28/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

maybe it’s a typo too, but the title should be :

“.. Tools Every SysAdmin MUST Know”
and still, this is advanced user knowledge, at most. I would not trust a sysadmin that knows so few. And..

reply link

harrywwc
Jun 27, 2009 @ 22:56

Hi guys,

good list – and some great submitted pointers to other useful tools.

to those carp-ing on about typo’s – give us all a break. you’ve never made a typo? ever?

Idea: How ’bout those who have never *ever* made an error in typing text be the first one(s) to give people grief about making a
typo?

I _used_ to be a real PITA about this; then I grew up.

The purpose of this blog, and other forms of communication, is to *communicate* concepts and ideas. *If* you have received
those clearly – in spite of the typos – then the purpose has been fulfilled.

/me gets down off his soapbox

.h

reply link

StygianAgenda
Feb 28, 2011 @ 20:49

I totally second that!

WTF is up with people making such a big deal about spelling? I could understand if the complaints were in regards to a
misspelling of a code-example, but if the language is coherent enough to get the idea across, then that’s all that really matters.

reply link

Lolcatz
Apr 7, 2011 @ 22:54

Typos*

reply link

roflcopter
Jun 24, 2011 @ 13:57

Typographical error*

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 29/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

Pádraig Brady
Jun 27, 2009 @ 23:37

A script I use often to show the real memory usage of programs on linux, is ps_mem.py

I also summarised a few linux monitoring tools here

I’d also mention the powertop utility

reply link

Saad
Jun 27, 2009 @ 23:54

This blog is more impressive and more useful than ever. I need more help regarding proper installation document on “php-
network weathermap” on Cacti as plugins

reply link

Jack
Jun 28, 2009 @ 2:18

No love for whowatch ? Real time info on who’s logged in, how their connected (SSH, TTY, etc) and what process thay have
running.

http://www.pttk.ae.krakow.pl/~mike/#whowatch

reply link

StygianAgenda
Feb 28, 2011 @ 21:50

I just became an instant fan of ‘whowatch’. Thanks!!! 😉

reply link

Ponzu
Jun 28, 2009 @ 2:28

vi — tool used to examine and modify almost any configuration file.

reply link

Manoj
Apr 27, 2011 @ 9:28

It is not a tool. It is an Editor

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 30/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

su -
Jul 28, 2011 @ 21:30

An editor is a tool for text documents.

reply link

Eric schulman
Jun 28, 2009 @ 5:38

dtrace is a notable mention for the picky hackers that wish to know more about the behavior of the operating system and it’s
programs internals.

reply link

Ashok kumar
Jun 28, 2009 @ 5:48

hi gud information , keep it up

ash

reply link

Enzo
Jun 28, 2009 @ 6:09

You missed: iftop & nethogs

reply link

Adrian Fita
Jun 28, 2009 @ 7:09

Excellent list. Like Amr El-Sharnoby above, I also find atop indispensable and think it must be installed on every system.

In addition I would like to add iotop to monitor disk usage per process and jnettop to very easily monitor bandwidth allocation
between connections on a Linux system.

reply link

Knightsream
Jun 28, 2009 @ 8:53

Well, the one i use right now is Pandora FMS 3.0 and its making my work easy.

reply link

praveen k

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 31/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Jun 28, 2009 @ 12:56

I would like to add

whoami ,who am i, finger, pinky , id commands

reply link

create own website

Jun 28, 2009 @ 15:32

i always love linux, great article

reply link

Mathieu Desnoyers
Jun 28, 2009 @ 21:14

One tool which seems to be missing from this list is LTTng. It is a system-wide tracing tool which helps understanding complex
performance problems in multithreaded, multiprocess applications involving many userspace-kernel interactions.

The project is available at http://www.lttng.org. Recent SuSE distributions, WindRiver, Monta Vista and STLinux offer the
tracer as distribution packages. The standard way to use it is to install a patched kernel though. It comes with a trace analyzer,
LTTV, which provides nice view of the overall system behavior.

Mathieu

reply link

Andy Leo
Jun 29, 2009 @ 1:02

Very useful, well done. Thanks!

reply link

Aveek Sen
Jun 29, 2009 @ 1:29

Very informative.

reply link

The Hulk
Jun 29, 2009 @ 2:11

I love this website.

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 32/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

kburger
Jun 29, 2009 @ 3:08

If we’re talking about a web server, apachetop is a nice tool to see Apache’s activity.

reply link

Ram
Jun 29, 2009 @ 4:07

Dude you forgot the most important of ALL!

net-snmpd

With it you can collect vast amounts of information. Then with snmpwalk and scripts you can create your own web NMS to
collect simple information like ping, disk space, services down.

reply link

Kartik Mistry
Jun 29, 2009 @ 5:15

`iotop` is nice one to be include in list. I used `vnstat` very much for keeping track of my download when I was on limited
connection 🙂

reply link

🐧 nixCraft
Jun 29, 2009 @ 7:03

@Everyone

Thanks for sharing all your tools with us.

reply link

feilong
Jun 29, 2009 @ 10:01

Very useful, thinks for sharing.

Take a look to a great tools called nmon. I use it on AIX IBM system but works now on all GNU/linux system now.

reply link

boz
Jun 29, 2009 @ 10:21

mtr

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 33/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

Scyldinga
Jun 29, 2009 @ 10:21

I’m with @paul tergeist, tools every linux user should know. The ps samples are nice, thanks.

No reference to configuration management tools ?

cfengine/puppet/chef?

reply link

Ken McDonell
Jun 29, 2009 @ 21:19

Nice summary article.

If your “system” is large and/or distributed, and the performance issues you’re tackling are complex, you may wish to explore
Performance Co-Pilot (PCP). It unifies all of the performance data from the tools you’ve mentioned (and more), can be extended
to include new applications and service layers, works across the network and for clusters and provides both real-time and
retrospective analysis.

See http://www.oss.sgi.com/projects/pcp

PCP is included in the Debian-based and SUSE distributions and is likely to appear in the RH distributions in the future.

As a bonus, PCP also works for monitoring non-Linux platforms (Windows and some of the Unix derivatives).

reply link

Lance
Jun 30, 2009 @ 2:37

I love your collection.

I use about 25% of those regularly, and another 25% semi-regularly. I’ll have to add another 25% of those to my list of regulars.

Thanks for compiling this list.

reply link

bogo
Jun 30, 2009 @ 6:01

Very nice collection of linux applications. I work with linux but I can’t say that i know them all.

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 34/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

MEHTA GHANSHYAM
Jun 30, 2009 @ 9:28

REALLY ITS VERY GOOD N USEFULL FOR ALL ADMIN.

THANKS ONCE AGAIN

reply link

fasil
Jun 30, 2009 @ 12:06

Good post…already bookmarked… cheers

reply link

Aleksey Tsalolikhin
Jun 30, 2009 @ 19:30

I’ll just mention “ngrep” – network grep.

Great list, thanks!!

Aleksey

reply link

Abdul Kayyum
Jul 1, 2009 @ 15:40

Thanks for sharing this information..

reply link

Aurelio
Jul 1, 2009 @ 20:20

feilong, I agree. I use nmon on my linux boxes from years. It’s worth a look.

reply link

komradebob
Jul 1, 2009 @ 22:36

Great article, many great suggestions.

Was surprised not to see these among the suggestions:

bmon – graphs/tracks network activity/bandwidth real time.

etherape – great visual indicator of what traffic is going where on the network

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 35/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

wireshark – tcpdump on steroids.

multitail – tail multiple files in a single terminal window
swatch – track your log files and fire off alerts

reply link

pradeep
Jul 2, 2009 @ 11:14

how the hell i missed this site this many days… 😛 thank god i found it… 🙂 i love it…

reply link

Jay
Jul 4, 2009 @ 17:23

O personally much prefer htop to top. Displays everything very nicely.

phpsysinfo is another nice light web-based monitoring tool. Very easy to setup and use.

reply link

Manuel Fraga
Jul 5, 2009 @ 16:55

Osmius: The Open Source Monitoring Tool is C++ and Java. Monitor “everything” connected to a network with incredible
performance. Create and integrate Business Services, SLAs and ITIL processes such as availability management and capacity
planning.

reply link

aR
Jul 6, 2009 @ 16:17

thanks for sharing all the helpful tools.

reply link

Shailesh Mishra
Jul 7, 2009 @ 19:13

Nice compilation. As usual, always very useful.

It would be nice if some of you knowledgeable guys can shed some light on java heap monitoring thing, thread lock detection
and analysis, heap analysis etc.

reply link

Bjarne Rasmussen

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 36/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Jul 7, 2009 @ 20:00

nmon is a nice tool… try google for it, it rocks

reply link

Balaji
Jul 12, 2009 @ 17:50

Very much Useful Information’s,

trafmon is one more useful tool

reply link

Stefan
Jul 15, 2009 @ 20:18

And for those which like lightweight and concise graphical metering:
xosview +disk -ints -bat

reply link

Raja
Jul 19, 2009 @ 3:03

Awesome. Especially love the ps tips. Very interesting

reply link

Rajat
Jul 24, 2009 @ 4:04

Thanks very good info!!!

reply link

nima0102
Jul 27, 2009 @ 7:39

It’s really nice 🙂

reply link

David Thomas
Aug 12, 2009 @ 9:49

Excellent list!

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 37/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Vinidog
Aug 29, 2009 @ 4:53

Nice… very nice guy!!!! 😉

reply link

Bob Marcan
Sep 4, 2009 @ 11:00

From the guy who wrote the collect utility for Tru64:

Name : collectl Relocations: (not relocatable)

Version : 3.3.5 Vendor: Fedora Project
Release : 1.fc10 Build Date: Fri Aug 21 13:22:42 2009
Install Date: Tue Sep 1 18:10:34 2009 Build Host: x86-5.fedora.phx.redhat.com
Group : Applications/System Source RPM: collectl-3.3.5-1.fc10.src.rpm
Size : 1138212 License: GPLv2+ or Artistic
Signature : DSA/SHA1, Mon Aug 31 14:42:40 2009, Key ID bf226fcc4ebfc273
Packager : Fedora Project
URL : http://collectl.sourceforge.net
Summary : A utility to collect various linux performance data
Description :
A utility to collect linux performance data

Best regards, Bob

reply link

Tman
Sep 5, 2009 @ 20:48

For professional network monitoring use Zenoss:

Zenoss Core (open source): http://www.zenoss.com/product/network-monitoring

reply link

Somnath Pal
Sep 14, 2009 @ 9:02

Hi,

Thanks for the nice collection with useful samples. Consider adding tools to monitor SAN storage, multipath etc. also.

Best Regards,
Somnath

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 38/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Eddy
Sep 17, 2009 @ 8:41

I did not see ifconfig or iwconfig on the list

reply link

Kestev
Sep 17, 2009 @ 13:57

openNMS

reply link

Sergiy
Sep 25, 2009 @ 12:39

Thanks for the article. I am not admin myself, but tools are very useful for me too.

Thanks for the comments also 🙂

reply link

Mark Seger
Sep 28, 2009 @ 18:02

When I wrote collectl my goal was to replace as many utilities as possible for several reasons including:
– not all write to log files
– different output formats make correlation VERY difficult
– sar is close but still too many things it doesn’t collect
– I wanted option to generate data that can be easily plotted or loaded into spreadsheet
– I wanted sub-second monitoring
– I want an API and I want to be able to send data over sockets to other tools
– and a whole lot more

I think I succeeded on many fronts, in particular not having to worry if the right data is being collected. Just install rpm and type
“/etc/init.d/collectl start” and you’re collecting everything such as slabs and processes every 60 seconds and everything else
every 10 seconds AND using <0.1% of the CPU to do so. I personally believe if you're collecting performance counters at a
minute or coarser you're not really seeing what your system is doing.

As for the API, I worked with some folks at PNNL to monitor their 2300 node cluster, pass the data to ganglia and from there
they pass it to their own real-time plotting tool that can display counters for the entire cluster in 3D. They also collectl counters
from individual CPUs and pass that data to collectl as well.

I put together a very simple mapping of 'standard' utilities like sar to the equivilent collectl commands just to get a feel for how
they compare. But also keep in mind there are a lot of things collectl does for which there is no equivalent system command,
such as Infiniband or Lustre monitoring. How about buddyinfo? And more…

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 39/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

http://collectl.sourceforge.net/Matrix.html

-mark

reply link

PeteG
Sep 29, 2009 @ 5:33

Darn,
I’ve been using Linux since Windows 98 was the current MicroSnot FOPA.
I know all this stuff. I do not make typoous.
Why do you post this stuff?
We all know it.
Sure we do!
But do we remember it? I just read through it and found stuff that I used long ago and it was like I just learned it. I found stuff I
didn’t know either.
Hummmm…… Imagine that!
Thanks, particularly for the PDF.
Saved me making one.
Hey, where’s the HTML to PDF howto?

Thanks again.

reply link

Denilson
Oct 26, 2009 @ 23:55

Use:

free -m

To show memory usage in megabytes, which is much more useful.

reply link

AndrewW
Nov 5, 2009 @ 23:48

Is it possible to display hard drive temps from hddtemp in KSysGuard? They are available in Ksensors and GKrellM, without any
configuration required. However I prefer the interface and flexibility of KSysGuard. Is there a way of configuring it?

Andrew

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 40/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Abhijit
Nov 10, 2009 @ 13:46

Zabbix open source monitoring tool

http://www.zabbix.com

reply link

greg
Jan 6, 2012 @ 18:27

Zabbix is a great tool that it doesn’t require a entirely separate project to make it easy to install and use (like Nagios and FAN).

I’ve been following it since its early days and its come a long way. Its sad that lists like this never give it its due, not even a foot
note mention.

while on that note.. really? your 17-20 makes the list, but nmap, mtr, and lsof get relegated to foot notes?

reply link

Kevin
Nov 15, 2009 @ 22:55

Thanks, good work

reply link

Stefano
Nov 22, 2009 @ 16:09

Just thanks! 🙂

reply link

GBonev
Nov 25, 2009 @ 14:13

Good Job on assembling the list

If I may suggest trafshow as an alternative to iptraf when you need to see more detailed info on source/destination , proto and
ports at once.

reply link

Gokul
Dec 7, 2009 @ 4:43

How to install the Kickstart method in linux

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 41/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Bilal Ahmad
Dec 8, 2009 @ 16:01

Very nice collection.. Worth a bookmark…Bravo…

reply link

Jalal Hajigholamali
Dec 9, 2009 @ 5:07

Thanks a lot…

reply link

mancai
Dec 11, 2009 @ 18:40

nice sharing, this is what i want looking for few day ago… tq

reply link

aruinanjan
Dec 14, 2009 @ 7:41

This is a nice document for new user, thaks to owner of this document.

arun

reply link

myghty
Dec 16, 2009 @ 7:57

Great post!! Thanks.

reply link

Rakib Hasan
Dec 16, 2009 @ 14:09

Very helpful. Thanks a lot!

reply link

PRR
Dec 22, 2009 @ 21:25

After so many thanks. Add one more……..

thank you. It’s very handy.

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 42/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

Yusuf
Dec 25, 2009 @ 19:35

Mark,

I am in technology myself and this tutorial page is very well organized

Thanks for taking the time to create this awesome page
great help for Linux new bees like myself.

reply link

Yusuf
Dec 25, 2009 @ 19:40

I meant to thank Vivek Gita

once again awesome job

reply link

Shrik
Dec 31, 2009 @ 9:58

Thank you very much VERY GOOD WEBSITE

reply link

sekar
Jan 1, 2010 @ 16:16

it is cool

reply link

Giriraaj
Jan 5, 2010 @ 7:38

Thanks for sharing most resourceful information.

reply link

Bhagyesh Dhamecha
Jan 6, 2010 @ 11:58

Dear all Members,

Thanks for sharing all your knowledge about Linux.. i really thankful for your share linux tips..!!

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 43/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

thanks and continue this jurny…as well

thank you..

reply link

Ganesan AS
Jan 10, 2010 @ 13:53

Good info. Thanks for sharing.

May GOD bless you to do more.

reply link

Mark Seger
Jan 10, 2010 @ 14:38

This is indeed an impressive collection of tools but I still have to ask if people are really happy with having to know so many
names, so many switches and so many formats. If you run one command and see something weird doesn’t it bother you if you
have to run a different tool but the anomaly already passed and you can no longer see it with a different tool? For example if you
see a drop in network performance and wonder if there was a memory or cpu problem, it’s too late to go back and see what else
was going on. I know it bothers me. Again, by running collectl I never have to worry about that because it collects everything
(when run as a deamon) or you can just tell it to report lots of things when running interactively and by default is shows cpu,
disk and network. If you want to add memory, you can always include it but you will need a wider screen to see the output.

As a curiosity for those who run sar – I never do – what do you use for a monitoring interval? The default is to take 10 minute
samples which I find quite worthless – remember sar has been around forever dating back to when cpus were much slower and
monitoring much more expensive. I’d recommend to run sar with a 10 second sampling level like collectl and you’ll get far more
out of it. The number of situations which this would be too much of a load on your system would be extremely rare. Anyone care
to comment?

-mark

reply link

miles
Jan 12, 2010 @ 4:58

Amr El-Sharnoby:
atop is awesome, thanks for the tip.

reply link

Serg
Jan 12, 2010 @ 6:09

hi Mark

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 44/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

absolutely agreed with you mate! if you are the sysadmin something – you will do it for yourself and do it right!
These tools like ps,top and other is commonly used by users who administrated a non-productive or desktop systems or for some
users who’s temporary came to the system and who needed to get a little bit of information about the box – and its pretty good
enough for them. )

reply link

met00
Jan 12, 2010 @ 18:15

If you are running a web server and you have multiple clients writing code, you will one day see CPU slow to a crawl. “Why?”,
you will ask. ps -ef and top will show that mysql is eating up resources…

HMM?

If only there was a tool which showed me what command was being issued against the database…

mytop

Once you find the select statement that has mysql running at 99% of the CPU, you can kill the query and then go chase down the
client and kill them too (or in my case bill them at $250/hr for fixing their code).

reply link

Mark Seger
Jan 12, 2010 @ 18:36

re mysql – it’s not necessarily that straight forward. I was working with someone who had a system with mysql that was
crawling. it was taking multiple seconds for vi to echo a single character! we ran collectl on it and could see low cpu, low network
and low disk i/o. Lots of available memory, so what gives? A close look showed me that even those the I/O rates were low, the
average request sizes were also real low – probably do so small db requests.

digging even deeper with collectl I saw the i/o request service times were multiple seconds! in other words when you requested
an I/O operation not matter how fast the disk is, it took over 2 second to complete and that’s why vi was so slow, it was trying to
write to it’s backing store.

bottom line – running a single tool and only looking at one thing does not tell the whole story. you need to see multiple things
AND see them at the same time.

-mark

reply link

mtituh Alu
Jan 19, 2010 @ 14:09

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 45/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

I have a postfix mail server, recently through tcpdump I see alot of traffic to dc.mx.aol.com, fedExservices.com, wi.rr.com,
mx1.dixie-net.com. I believe my mail server is spamming. How do I find out it is spamming? and how do I stop it. Please help.

reply link

🐧 nixCraft
Jan 19, 2010 @ 15:01

Only allow authenticated email users to send an email. There are other things too such as anti-spam, ssl keys, domain keys
and much more.

reply link

kirankumarl
Feb 3, 2010 @ 9:26

Dear sir pls send me some linex pdf file by wich i can learn how to install & maintanes

reply link

Visigoth
Feb 21, 2010 @ 15:11

I like the saidar tool, and iptstate. Check them out.

reply link

JK
Feb 23, 2010 @ 12:43

Hiii vivek,
Do you know any application to shut down a ubuntu 9.1 machine when one of its network interface is down..I need it for
clustering..

reply link

AD
Feb 25, 2010 @ 6:23

Thank you very much,,,….

This information is very useful for me to monitoring my server…

reply link

Tarek
Feb 26, 2010 @ 19:18

Actually where I work we have and isa server acting as a proxy/firewall, which prevent me from monitoring internet traffic
consumption. so i installed debian as a network bridge between the isa server and the lan, and equipped it with various
monitoring tools (bandwidthd, ntop, vnstat, iftop, iptraf, darkstat).

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 46/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

deepu
Mar 2, 2010 @ 7:31

it is a very good and resourceful infomation.

reply link

Solo
Mar 7, 2010 @ 23:40

OMG !

Amazing – Super – Ultra nice info . THX pinguins !

reply link

vijay
Mar 12, 2010 @ 7:30

its so usefulllll thanks a lot

reply link

Venu Yadav
Mar 23, 2010 @ 5:05

Good information. Thanks

reply link

Prashant Redkar
Mar 25, 2010 @ 7:10

Thank you it is very helpful

reply link

Saorabh Kumar
Mar 25, 2010 @ 12:12

Good knowledge base, great post

reply link

Spyros
Mar 30, 2010 @ 2:52

Very interesting read that really includes the tools that every admin should know about.
https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 47/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

amitabh mishra
Mar 30, 2010 @ 9:47

Hi
Its a great topic. Actually i am a Mysql DBA and i fond a lot of new things here.
So i can say it will help in future.

Thanks once again

reply link

Chinmaya
Apr 2, 2010 @ 4:48

Excellent one !!!

reply link

saurav
Apr 3, 2010 @ 18:43

wow this is some great info,also the various inputs in comments. One i would like to add is

ulimit

User limits – limit the use of system-wide resources.

Syntax
ulimit [-acdfHlmnpsStuv] [limit]

Options

-S Change and report the soft limit associated with a resource.

-H Change and report the hard limit associated with a resource.

-a All current limits are reported.

-c The maximum size of core files created.
-d The maximum size of a process’s data segment.
-f The maximum size of files created by the shell(default option)
-l The maximum size that may be locked into memory.
-m The maximum resident set size.
-n The maximum number of open file descriptors.
-p The pipe buffer size.
-s The maximum stack size.

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 48/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

-t The maximum amount of cpu time in seconds.

-u The maximum number of processes available to a single user.
-v The maximum amount of virtual memory available to the process.

ulimit provides control over the resources available to the shell and to processes started by it, on systems that allow such control.

reply link

Mustafa Ashraf Rahman

Apr 20, 2010 @ 13:44

hello Vivek Gite,

This is really a very good post and useful for all admin.
Thanks,
Ashraf

reply link

arief
Apr 21, 2010 @ 15:23

Great tips..
Thanks

reply link

Eduardo Cereto
Apr 25, 2010 @ 5:20

I think you missed my top 2 monitoring tools:

monit: http://mmonit.com/monit/
mrtg : http://oss.oetiker.ch/mrtg/

reply link

Lava Kafle
Apr 29, 2010 @ 9:05

Perfect examples : thanks

reply link

wolfc01
May 2, 2010 @ 15:32

See also the “Linux Process Explorer” (in development) meant to be an equivalent the windows process explorer of Mark
Russinovich.

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 49/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

See http://sourceforge.net/projects/procexp

reply link

ohwell
May 2, 2010 @ 18:33

if an “admin” doesnt know 90% of those tools, he isn’t a real admin. you will find most of these tools explained in any basic linux
howto…

reply link

ravi
May 3, 2010 @ 13:05

how the systems can be seen from sitting on one computer like as admin. what is going on screen in grd floor computers?

reply link

Anonymous
May 7, 2010 @ 19:17

but how to kill process ID in my server..

reply link

FHJ
May 11, 2010 @ 14:32

I assume you can find the process ID – for example if your process is called foo.bar, you could do
ps -ef | grep foo.bar
this will give the PID (process ID) as well as other information.
Then do
kill -9 PID (where PID is the number your found in the above).

If you are working on a Mac you have to do ‘sudo kill -9 PID’ since the kill command is an “admin” action that it wants you to
be sure about.

Or if you use top, and you can see the process you want to kill in your list, you can just type k and you will be prompted for the
PID (the screen will freeze so it’s easy to read). You type the number and “enter”, will have to confirm (y), and the process is
killed with -15. Which is less “severe” than a “kill -9” which really kills just about any process (without allowing it a graceful
exit of any kind).

Use with care!

reply link

someone
May 10, 2010 @ 17:59
https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 50/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Gnome system monitor is a pretty useless utility if you ask me.

its neat to have it as an applet, but thats it.

reply link

kalyan de
May 14, 2010 @ 2:18

Thanks,

I think it will be very helpfull for me as i am practicng oracle in redhat linux4. Today i will try to check it. I want 1 more help. I
am not clear about crontab. saupposed i want to start a crontab in my system with any script which i have kept in /home/oracle
and want to execute in every 1 hour. Can u send me how i can do with details.
Thanks,

kalyan de.
Chennai, india
+91 9962300520

reply link

Samuel Egwoyi
May 14, 2010 @ 9:29

how can i practice Mysql using linux

reply link

Basil
May 21, 2010 @ 20:49

This article simply rocks

reply link

Fenster
Jun 1, 2010 @ 10:24

hey, thanks, just installed htop and iptraf, very nice tools!!

reply link

zim
Jun 2, 2010 @ 13:12

atop

man atop shows

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 51/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

“The program atop is an interactive monitor to view the load on a Linux system. It shows the occupation of the most critical
hardware resources (from a performance point of view) on system level, i.e. cpu, memory, disk and network.It also shows which
processes are responsible for the indicated load with respect to cpu- and memory load on process level; disk- and network load is
only shown per process if a kernel patch has been installed.”

reply link

Boggles
Sep 21, 2011 @ 1:52

Have to agree with zim. Atop is a great tool along with it’s report generating sister application atopsar. This is a must-have on
any server I manage.

reply link

Amit
Jun 2, 2010 @ 13:26

Hello,

How to install a Suphp on cpanel.

reply link

Walker
Jun 4, 2010 @ 4:19

Thanks 🙂
THIS helped me a lot.

reply link

m6mb3rtx
Jun 4, 2010 @ 16:34

Great article, very userfull tools!

reply link

dudhead
Jun 5, 2010 @ 14:38

Great list! Missed df command in the list.

reply link

giftzy
Jun 5, 2010 @ 18:26

I become to love linux after 10 years of hp-ux

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 52/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

Rafael Quirino de Castro

Jun 7, 2010 @ 17:08

I´m lookuing for apache parameter on the web and found here.

So, my contribute is: try to use iftop, iptraf, ifstat, jnettop and ethstatus for network graphical and CLI monitoring.

Use tcmpdump and ngrep for packet sniffing

HTB is very good for QoS in the network, especially if you need to reduce slower VPN network

reply link

georges
Jun 9, 2010 @ 15:39

fuser command is missing from this list. it tells you which command is using a file at the moment. Since in Linux everything is a
file, it is very useful to know!
Use it this way:
# to know which process listens on tcp port 80:
fuser 80/tcp

# to know which process uses the /dev/sdb1 filesystem:

fuser -vm /dev/sdb1
etc …

reply link

Naga
Jun 13, 2010 @ 7:19

Is there any good tools for analyzing Apache/Tomcat instances.

reply link

Jan 'luckyduck' Brinkmann

Jun 15, 2010 @ 11:02

‘ethtool’ can also be very useful, depending on the situation:

– searching for network problems

– checking link status of ethernet connections
– and so on

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 53/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Abdullah
Jun 16, 2010 @ 7:15

nice list, at the end i think what you meant is “Bonus” and not “bounce”

“bounce” means “jump”

“bonus” means extra goodies 🙂

reply link

dust
Jun 23, 2010 @ 8:19

What is in Linux that is equal to cfgadm in Solaris?

reply link

Jerome Christopher
Jul 6, 2010 @ 19:55

Thanks for the excellent list of commands, links and info.

Jerome.

reply link

sriharikanth
Jul 12, 2010 @ 13:49

Thanks, very useful information provided.

reply link

Jyoti
Jul 13, 2010 @ 9:57

very useful

reply link

t.k.
Jul 16, 2010 @ 22:02

Good compilation of commands. Thanks!

reply link

Thomas
Aug 3, 2010 @ 17:40

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 54/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

If you want graphy easly your performance data, try BrainyPDM: an another open source tool! http://www.brainypdm.org

reply link

Zanil Hyder
Aug 4, 2010 @ 5:44

Though i have come across most of these names, having them all in one list will prove to be a good resource. I am going to make
a list from these and have it within my website which i use for reference.

Thanks for the examples.

reply link

brownman
Aug 20, 2010 @ 8:57

web-based gui : webmin wins them all

reply link

chandra
Aug 28, 2010 @ 7:39

Hi ite really very very nice which is helful to fresher.

Thanks a lot…………………..

Regards
Amuri Chandra

reply link

George
Aug 30, 2010 @ 15:53

Great resource…Really helpful for a novice as well for an expert…

reply link

SHREESAI LUG
Sep 4, 2010 @ 5:36

hiiiiiiiiiiiii
we r SHREESAI LINUX USER GROUP FRM MUMBAI
THIS COMMANDS R REALLY NICE

THANKS
VIVEK SIR
https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 55/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

PLZ REPLY US ON MAIL

reply link

Tunitorios
Sep 12, 2010 @ 2:31

Thanks for this great tips.

My question is how to show the username(s) wich are connected to the server and they are using ftp protocole ?

reply link

Marcelo Cosentino
Apr 7, 2011 @ 12:38

Try ftptop . I think you can find it in centos , red hat , slack, debian etc…
Ftptop works with a lot of ftp servers daemons.

reply link

mark seger
Sep 12, 2010 @ 11:48

I don’t believe that ftp usage by user is recorded anywhere, so you’d have to get inventive. The way I would do it is use collectl to
show both processes sorted by I/O and ftp stats. Then is simply becomes a matter of see which processes are contributing to the
I/O and who their owners are.
-mark

reply link

jan
Feb 24, 2011 @ 7:42

Usually ftp access are recorded in /var/log/messages file (at least pure-ftpd)

reply link

sriram
Sep 12, 2010 @ 12:53

Dumpcap is another command which is useful for capturing packets. Very useful tool

reply link

Riadh Rezig
Sep 12, 2010 @ 13:12

There is another tools “Incron” :

This program is an “inotify cron” system. It consists of a daemon and a table manipulator. You can use it a similar way as the
regular cron. The difference is that the inotify cron handles filesystem events rather than time periods.

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 56/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

eaman
Sep 14, 2010 @ 6:03

discus is a nice / light tool to have an idea of file system usage.

reply link

Amzath
Sep 14, 2010 @ 21:43

Handy list.

Also, these might be handy as well…

lsdev – list of installed devices

lsmod – list of installed modules
ldd – to see dependencies of a executable file
watch – automated refresh of any code every specified seconds, etc
stat – details of any file
getconf – to get HP server details
runlevel – redhat run level

Search in web for more detailed info.

Good luck…

reply link

Rafiq
Sep 20, 2010 @ 11:45

Hi guys,
I m totally new to the linux & this web aswell.
Would some1 help me here regarding, mirrordir utility?
what would b the full syntex if i only want to copy/mirror changed/edited files from
source to destination. since last mirror.
And how to define specific time to run this command, i mean schedule.
Thanks in advance.

reply link

Jalal Hajigholamali
Sep 20, 2010 @ 11:54

Hi,

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 57/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

use “rsync” command..

reply link

leebert
Sep 28, 2010 @ 20:58

Don’t forget systemtap (stap) which provides the equivalent of Solaris’ invaluable “dtrace” scripting utility. There’s a “dtrace” for
Linux project but I haven’t been able to get it to compile on my OpenSuSE 11.x.

On SuSE Linux is “getdelays” , enabled via the grub kernel command line “delayacct” switch (starting with SuSE 10
Enterprise…). It’ll reveal the amount of wait a given process spends waiting for CPU, disk (I/O) or memory (swap), great for
isolating lag in the system.

There are many many other monitoring tools (don’t know if these were mentioned before) atopsar (atop-related), the
sysstat/sar-related sa* series (sadc, sadf, sa1), isag, saidar, blktrace (blktrace-blkiomon / blktrace-blkparse), iotop, ftop, htop,
nigel’s monitor (nmon), famd/fileschanged, acctail, sysctl, dstat, iftop, btrace, ftop, iostat, iptraf, jnettop, collectl, nagios, the
RRD-related tools, the sys-fs tools, big sister/brother … you could fill a book with them all.

reply link

Lonu Feruz
Sep 29, 2010 @ 8:37

please help where I can insert the command of route add of a node. whenever the server is up i have to re do the command. I
need to know where i can put this command permanently

reply link

nagaraju
Oct 1, 2010 @ 4:47

IT IS SUPERB LIST

reply link

MAHENDRA SINGH
Oct 2, 2010 @ 12:09

thanx
your collection is fantastic.

now i want to know that, how linux works

reply link

Rino Rondan
Oct 7, 2010 @ 19:37

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 58/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Thanx !!!

A really completed guide !

reply link

games
Oct 8, 2010 @ 1:43

thank you so much it’s very usefull for me

reply link

sameer
Oct 15, 2010 @ 6:14

ThanX..!!

can u send basic linux commands with ex

Thanks again

reply link

Gunjan
Oct 17, 2010 @ 15:42

Nice post, its really useful and helping beginners to resolve server issue

reply link

Moe
Oct 19, 2010 @ 9:13

another good tool for monitoring traffic and network usage:

vnstat
this also makes statistics for bandwidth usage over time which can be display for daily, weekly and monthly usage. very useful if
you don’t want to install a web-based tool for this.

reply link

Stan
Apr 21, 2011 @ 12:35

Nice history stats.

reply link

vishal sapkal
Oct 19, 2010 @ 14:54

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 59/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

very nice
very importan tool of monetering
thanks for ……………………………………….

reply link

david a. lawson
Oct 22, 2010 @ 0:32

this rocks. it could not have come at a better time as i am into my first networking course. thanks so much… i found this through
stumbleupon linux/unix

reply link

ram
Nov 12, 2010 @ 8:55

well,there are so good,i love them!

reply link

Nik
Nov 15, 2010 @ 17:01

If you want to monitor CPU, memory, I/O and disk usage across multiple servers you can use Librato Silverline – it’s a
commercial product but the first 8 cores are always free. You can actually do a lot more with Silverline, i.e. place apps in
individual containers, assign resource quotas to containers, trigger events etc. but as a monitoring tool it is really great too.

reply link

Rajkapoor M
Nov 30, 2010 @ 12:52

Hi,
It’s awasome……………………..thanks to builder…..
Thanks&Regards,
Rajkapoor M

reply link

jalexandre
Dec 2, 2010 @ 0:41

Perl?!

reply link

jalexandre
Dec 2, 2010 @ 0:44

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 60/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

And a good Sysadmin always can count with you prefered script language.

I using perl for monitoring a lot of basic infra structure services, like DHCP, DNS, Ldap, and Zabbix for generate alarms and very
nice graphs.

reply link

Sarath Babu M
Dec 11, 2010 @ 9:07

Hi,

One of My Professor is introduce about the Ubantu This os is I like very much this flyover. Before I am Using XP but now I
download all app. and I all applications. i always love linux, great article.

sarath

reply link

Laxman
Dec 23, 2010 @ 9:37

Very interesting I will try

I hope it’ll help for me

reply link

sah
Dec 23, 2010 @ 22:19

thanks alot … its a great help~!

reply link

KK
Dec 25, 2010 @ 4:19

Sumo is the best, the best that ever was and the best that ever will be.

Way to go Sumo

reply link

Deepak
Jan 6, 2011 @ 13:18

Thanks …. This is really helpful….

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 61/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

mark
Jan 7, 2011 @ 7:05

How would I get a list of slow running websites on my server via ssh?

reply link

nigratruo
Jan 13, 2011 @ 18:41

Great list, but why is TOP still used?

It is a highly limited utility. HTOP can do all top can, plus a ton of stuff more:
1. use colors for better readabilty. In the 21st century, all computers have a super hightech thing on their monitor called COLORS
(sarcasm off)
2. allow process termination and sending of signals (even multi select several processes)
3. show cpu / ram usage with visual bars instead of numbers
4. show ALL processes: top cannot do that, it just shows what is on the screen. It is the main limiting factor that made me chuck
it to the curb.
5. Use your cursor keys to explore what cannot be shown on the screen, for example full CLI parameters from commands.
6. Active development. There are new features. Top is dead and there does not seem to have been any active development for 10
years (and that is how the tool looks)

reply link

coldslushy
Feb 7, 2011 @ 12:55

Colors? Too resource intensive…

reply link

josh
Jul 19, 2011 @ 15:38

Colors do not always contrast well with the background.

reply link

abdul hameed
Feb 2, 2011 @ 6:52

Dear All,

My Oracle Enterprice Linux getting very slow, when my local R12.1 start.

by using “top” command i found lot of Database users are running.

normally in other R12 instance only few Database users are available. can any one tell me what might be the problem,, is it OS
level issue or my Application Issue.. where i have to start the tuning .

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 62/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Kinldy advice me.

Thanks in Advance,
Abdul Hameed

reply link

Vimal
Feb 9, 2011 @ 20:02

Shit, this looks great! Thanks very much.

reply link

Michael
Feb 10, 2011 @ 10:30

“My Oracle Enterprice Linux getting very slow, when my local R12.1 start.”

Arghh! Linux is turning into Windows!

These are super machines, people! Remember when 4.2BSD came out, and people were saying “Unix is becoming VMS”? With
4.1 BSD, we had been flying on one MIP machines (think of a one Mhz clock rate – three orders of magnitude slower than
today’s machines, not Ghz… Mhz!). So much was added so quickly into 4.2 (kernels were no longer a few hundred kilobytes at
most) that performance took a nose dive. But then 4.3 BSD fixed things for a while (with lots of optimizations such as unrolling
the the instructions in a bcopy loop till they just just filled an instruction cache line). It didn’t hurt either that memory was
getting cheaper, and we could afford to upgrade our 30 user timesharing systems from four Megabytes to eight Megabytes, or
even more! It takes an awful amount of software bloat (and blind ignorance of the principles we all learned in our “combinatorial
algorithms” classes) to be able to make machines that are over a thousand times faster than the Vaxen we cut our teeth on be
“slow”.

Today’s Linux systems hardly feel much faster on multicore x86 machines than they did on personal MicroVaxes or the
somewhat faster Motorola 68020 based workstations (except for compilations, which now really scream by – compiling a
quarter meg kernel used to take hours, whereas now it feels like barely seconds pass when compiling kernels that, even
compressed, are many times larger. But then, compiler writers for the most part (25 years ago, Green Hills employees seemed a
glaring exception and I don’t know about Microsoft) have to prove they have learned good programming practices before their
skills are considered acceptable). Other software, like the X server, still feels about the same as it did in the eighties, despite
today’s machines being so much faster. And forget about Windows!

reply link

benjamin ngobi
Feb 15, 2011 @ 15:44

wow these are great tools one should know.thank you so much coz it just makes me better every day

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 63/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Mousin
Feb 16, 2011 @ 9:52

Awesome Thanks a ton worth a bookmark..

reply link

krishna
Feb 23, 2011 @ 9:17

Friends I have typed the corrected question here below. Please let me know if you can help:

Part1 : Find out the system resources — CPU Usage, Memory Usage, & How many process are running currently in “exact
numbers”?, what are the process?
Part2: Assume a process CACHE is running on the same system — How many files are opened by CACHE out of the total
numbers found above?? what are the files used by CACHE? Whats the virtual memory used by the process. What is the current
run level of the process.
Part3: How many users or terminals are accessing the process CACHE?
Part4: The script should run every 15secs with the time of execution & date of script and the output should be given to a file
“richprocess” in the same order as that of the question.
Note: NO EXTERNAL TOOLS are allowed to be used with linux. Only shell script should be written for the same!

reply link

krishna
Mar 4, 2011 @ 13:08

I got the answer for it i used

$vi file1
#!/bin/bash
while [ true ]
do
echo “—$(date)—-” >> richprocess
echo ” 1. virtual mem of the system” >> richprocess
vmstat >> richprocess
echo ” 2. Free mem available in system” >> richprocess
free -m >> richprocess
echo ” 3. Mem used by cache & to print files used by CACHE”
pmap -x `ps -A | pgrep CACHE` >> richprocess
sleep 15
done
:wq!
$bash file1 &
$cat richprocess # to see the output..

I had a worse comment from someone to try a nonexistent website.. saying “www.Iwantothersdomyhomework.com” please
dont post things like this. I am asking help only because I want to learn. Thanks for support from this site..

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 64/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

vasu
Apr 16, 2011 @ 2:07

1) lshw

3) w user

reply link

Ryan Barrett
Mar 1, 2011 @ 14:59

Thanks great post!

reply link

ysha
Mar 4, 2011 @ 5:06

thanks.. i love it

reply link

Rohit Shrivastava
Mar 10, 2011 @ 5:01

Very good for beginners as well as professional. Thank you very much Sir for sharing your knowledge. I really appreciate.

reply link

ctian
Mar 11, 2011 @ 8:41

nice one. it really works for a newby like me

reply link

Michael
Mar 17, 2011 @ 7:01

This is really helpful. I know these tools, but did not use them well. Many thanks for your tips.

reply link

PRADEEP
Mar 28, 2011 @ 4:33

I ve updated kernel…now i need to update it without restart the server.

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 65/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Plz help….

reply link

John
Apr 5, 2011 @ 21:29

cant see nload on the list , easy showing of whats going on with your network..

nload eth0 should show rest.

reply link

Parthyz
Apr 12, 2011 @ 6:30

Great Work man.. thanks a lot..

reply link

Matias
Apr 12, 2011 @ 12:46

Nice list. I would add LogWatch, to send daily reports to your mail.

reply link

sasidaran
Apr 15, 2011 @ 5:16

Good collection of commands.

reply link

TiTiMan
Apr 15, 2011 @ 15:29

Thanks for sharing a good list of useful commands.

I found a typo where there should not be a dash in front of the options for

ps auxf

in the command for

Find Out The Top 10 Memory Consuming Process
and
Find Out top 10 CPU Consuming Process

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 66/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

vasu
Apr 16, 2011 @ 2:07

top

reply link

Me
Jun 7, 2013 @ 16:33

Thanks for the typo correction; command works for me now.

reply link

Sachin Jain
Apr 18, 2011 @ 14:16

Thanks for sharing such a use full commands,

friends i want to watch terminal session, which is logged in vai ssh
could you please help me??

reply link

chandu
May 6, 2011 @ 3:06

Plz help me how write the firewall rules in linux.

reply link

Jalal Hajigholamali
May 6, 2011 @ 12:40

Hi,

see manual page of iptables and get examples from google

reply link

cypherb0g
May 6, 2011 @ 19:56

useful stuff!

reply link

sudipta
Jun 3, 2011 @ 4:58

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 67/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

GR8 effort … Worth 2 b appreciated

reply link

Liunx
Jun 10, 2011 @ 7:56

That’s great!
thanks very much.

reply link

foster
Jun 16, 2011 @ 23:13

Nagios fork Icinga should be on people’s radar as well.

https://www.icinga.org/

reply link

Jalaluddin
Jun 24, 2011 @ 6:55

Hi
I want to learn linux firewall and file server from base.
Can u sujjest me, in which link i can get all those useful material.

Thank You

reply link

Adil Husain
Jun 30, 2011 @ 10:43

Nice list … i’ll bookmark it for quick ref.

reply link

Bhanu Kashyap
Jul 9, 2011 @ 17:26

Its Very Useful For Us….

Thanks….!!

reply link

Raivis
Jul 12, 2011 @ 5:48

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 68/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

systemgraph – http://www.decagon.de/sw/systemgraph/

Nice graphical system statistics RRDTool frontend which produces hourly, daily, weekly, monthly … graphs of various system
data. At the moment it provides graphs for memory usage, cpu info, cpu frequency, disk iostat, number of users, number of
processes, number of open files, number of tcp connections, system load, network traffic, protocl statistic, harddisk/partition
usage and temperatures, privoxy proxy statistic, ntpdrift, fan status and system temperatures.
It is simple and it doesn’t require snmp. It consists only of some shell and perl scripts.

reply link

Aviv.A
Jul 14, 2011 @ 22:30

You forgot the command “htop” 😀

reply link

Laurens
Jul 15, 2011 @ 22:16

An other interesting program wich hasn’t been mentioned yet is Midnight Commander (mc). At least it’s my favourite file
manager in a console environment.

Thanks all for your contributions. There are a lot of interesting programs wich I already use, or certainly will be using in the
future.

reply link

Sravi Raj
Jul 19, 2011 @ 5:03

Nice List

reply link

andy
Jul 21, 2011 @ 8:48

NO PRINT FUNKTION ? BIG FAIL IN YOUR FACE…damn why is every hole blogging but a printfunktion is missing ? i dont
need the scrappie comments in my prints…..

reply link

Tommie
Sep 11, 2011 @ 8:27

Nice Roundup. However, I love you not having a print function. I am able to print what I need without it… 😉

htop missing? 🙂

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 69/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

🐧 nixCraft
Sep 11, 2011 @ 12:21

To see a print version just append /print to the end of the url.

reply link

GEORGE FAREED
Jul 25, 2011 @ 20:43

thaaaaaaaaaaaanks alot 🙂
its useful informations 🙂

reply link

apparao
Aug 3, 2011 @ 11:36

Thanks

reply link

kiran.somidi
Aug 3, 2011 @ 12:47

traceroute

reply link

kiran.somidi
Aug 3, 2011 @ 12:49

tarceroute coomand is not their

reply link

Lalit Sharma
Aug 7, 2011 @ 14:13

how can i copy all this?

reply link

amit lamba
Aug 29, 2011 @ 8:16

m using ubuntu 9.10 on system but problem is regarding internet …. unable to connect with internet…
waiting for useful reply

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 70/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

Daniel Brasil
Aug 30, 2011 @ 22:03

Very good post. I’ve some problems trying to figure out historical data about disk usage. I still dont know a good tool for that. sar
is wonderful but it’s unable to record disk usage per process. You know any tool for that?

reply link

greg
Jan 6, 2012 @ 18:30

most monitoring tools like nagios, cacti, and zabbix give you the ability to trend your disk usage, and even alert at certain
capacity points.

reply link

jock
Sep 6, 2011 @ 2:45

Its great, but i’m having a little inconvenient, i want to look the detail for a process, exactly from apache, but the result is always
the seem, any one have a trick for see them? explaining better, i have a process from apache but not die, it keep for a long time
using the resource and overloading the machine, when i see with a “ps auxf” the result is
apache 32327 85.7 0.5 261164 39036 ? R 22:49 0:49 _ /usr/sbin/httpd

I want see wath is doing this process “32327” exactly, any idea?

reply link

greg
Jan 6, 2012 @ 19:13

you can try strace as mentioned in the tools and you can also look at the files in /proc/PID/ (so /proc/32327 for you)

reply link

eeb2
Sep 7, 2011 @ 21:25

Thanks for posting this list. Keep up the good posts!

reply link

khupcom
Sep 12, 2011 @ 8:30

I’m using monitorix and vnstat to monitor my servers

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 71/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Gaurav kuamr jha

Oct 2, 2011 @ 7:42

Great it was bagger description for me.

This is article has solved my lot of problems
thanks for this
gkjha009

reply link

[email protected]
Oct 8, 2011 @ 10:14

thanks 🙂

reply link

Peter Green
Oct 15, 2011 @ 15:29

Great article, there are many great suggestions! I want to contribute with these two:

GoAccess – real-time Apache/nginx log analyzer and viewer, runs in a terminal in *nix systems.
CCZE – modular log colorizer

reply link

cirrus
Oct 21, 2011 @ 10:44

great post cuz , very informative for recent nix converts “PCLinuxOS#1”

reply link

David Bothwell
Nov 3, 2011 @ 16:27

I have just recently released my first open source project the Remote Linux Monitor, which you can find at here . I modeled it on
Gnome’s System Monitor and I would love get your feedback on it. Thanks.

reply link

Ferenc Varga
Nov 4, 2011 @ 22:06

for http traffic, i suggest to use justniffer.

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 72/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

bishow
Nov 8, 2011 @ 14:22

yeah really nice post !!!

It’s really help me but how about the centos linux command can anyone tell me about that, all the linux command will be same
for the all versions of linux (Is it wright guys) .
or
please email me if you know some code of contos linux cause i using this lunux.

regards,

reply link

Unni
Nov 11, 2011 @ 1:39

Well written , keep up the good work ..

….
Thanks,
Unni

reply link

Gmaster
Dec 2, 2011 @ 12:30

Great job in compiling all the utils in one nice post. Thank you very much!

reply link

Denis
Dec 9, 2011 @ 22:30

Great stuff, nice to have it all in one place. 🙂

reply link

manna
Dec 12, 2011 @ 5:09

Am working in small company having around 45 employees,we r using linux server in our office, i need to checkout or monitor
the user’s website, which they are accessing in office hours,Please any one suggest me with correct command. Thanks

reply link

Sibbala Govardhan Raju

Dec 13, 2011 @ 10:08

Dear Sir,

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 73/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

My Name is Govardhan Raju from TIRUPATI, ANDHRA PRADESH. working as a linux (RHEL4) operator. I want to take data
backup daily. Is there any posibility to take todays date files only ? Please suggest me the commands which are useful to take
backup daily with syntax.

Thanking U Sir,

S Govardhan Raju

reply link

Kash
Jan 15, 2012 @ 14:41

This is monitoring article not backup article??? Search your question somewhere else.

reply link

bhaskar
Feb 6, 2012 @ 19:57

Hi, I’m using windows 7 version. how to access the UNIX commands in windows plat form without installing any set up file or
UNIX Operating System.

Could you please suggest any to me.

Thanks,

reply link

Steve
Feb 13, 2012 @ 16:11

I feel an important one is psacct.. Should have at least made the list. Very useful to track what commands/users are eating cpu
time.

reply link

AL
Feb 24, 2012 @ 12:55

There is another tool we use for system monitoring, it’s from IBM called NMON – pretty good tool, I recommend it.

AL

reply link

sudhir menon
Mar 21, 2012 @ 7:10

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 74/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

nfsiostat is a great small command on linux

reply link

nishhhh
Mar 22, 2012 @ 14:15

nice collection..referencing related articles are like ‘feathers in the cap’ !!

appreciate it..thanks!

reply link

naveen
Mar 23, 2012 @ 8:54

Dear all ,

I have deployed some 40 routers in the cafes,60 more in have to deploy in diff region/areas.I want to monitor the Wifi routers
sitting in one place.

I have connected Debian installed thin client to each router to provide internet to the customers @ cafe,free browsing for 30
mins.

Can some one suggest me a tool for monitoring the Routers & my debian machine performance.

Regards
Naveen C

reply link

naveen
Mar 23, 2012 @ 8:58

The router model is DAP-1155 Wireless N 150 i have purchased some 100 and i am planning to buy 300 more.

pls do help me

Thanks in advance

Naveen C

reply link

LTJX
Aug 2, 2012 @ 15:08

Such routers often include a management/monitoring package, which may be more immediately useful than using Debian-
based commands, and the router software may allow for viewing the multiple routers you describe from a single screen. I
know that the latest NETGEAR wireless routers include a software package like this.

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 75/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

But, why just 30 minutes per customer? Isn’t that the wrong message to give the cafe customers?: Like, hurry up and drink
your coffee/tea, and then get out!!
Maybe you could try a one hour limit and see what happens. Linux is much more efficient than many people realize, even
under heavy usage.

I think that Starbucks and similar shops in North America tend to offer unlimited Internet access with any purchase – and
most don’t really seem to enforce the purchase requirement, unless a “freeloader” is annoying or being offensive to other
customers, etc.

reply link

Stan
Aug 6, 2012 @ 6:25

Have you tried MRTG to monitor your routers. More for just network
http://oss.oetiker.ch/mrtg/

reply link

Eric
Apr 6, 2012 @ 13:18

Great post! Some of these I never thought to use that way. When using free I will often use the -m option to display in Mb.
(Example: free -m)

reply link

sudarshan
Apr 11, 2012 @ 6:17

Hi Team,

I required to find the hardware information in linux, can you please advise.

I recieved alert as below:

Tivoli MINOR for : Accelerator board battery failed

thanks
sudarshan

reply link

Prasad
Aug 17, 2012 @ 18:23

Just do

# uname

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 76/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

for specific details do:

# uname –help

reply link

Navneet
Apr 21, 2012 @ 10:34

Thanks Vivek,

For Posting this. It is very useful for Beginners as well.

Keep the Great work going on…..

reply link

Shreyansh Modi
May 2, 2012 @ 18:04

Great Share 🙂
After using a few of these commands I am feeling like I am an Linux Operations Engineer 😉

reply link

Ravi
May 9, 2012 @ 18:17

Great and useful information.

Thanks

reply link

Michael
May 10, 2012 @ 22:10

Your forgot monit (I dont care why it failed at 3a.m. – just fix it and tell me!) and collectd (just record how things are going over
the months, without freaky sar..)

Michael 😉

reply link

Omar Osorio
Jun 5, 2012 @ 20:27

lshw -short

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 77/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

vvvv
Jun 12, 2012 @ 3:50

I Liked it too thank you)

reply link

oran00b
Jun 16, 2012 @ 19:05

excellent and concise info. For people who are not dedicated Linux Admin but need some tools to work with Linux, this is
excellent!

reply link

darkfader
Jul 3, 2012 @ 17:14

Learn to use sar well and you’ll never need to use iostat, vmstat, etc.

reply link

William G. Loughran
Jul 11, 2012 @ 13:32

Excellent – can’t thank you enough.

Not sure what CIFS ‘tools’ we were using – not SAMBA

reply link

Vichuz
Jul 12, 2012 @ 2:17

Keep up the nice work.

reply link

seema
Jul 17, 2012 @ 8:54

pl help me
as i am new in linux i am copying a folder in
/filesystem/usr/local …. form pen derive , but it is giving error msg ” no permission ”

pl help

reply link

Sandeep

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 78/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Jul 17, 2012 @ 12:19

Its really useful ….nice one..I liked it!!!

reply link

Praveen Reddy
Jul 19, 2012 @ 5:29

Hi,

How to take data back in Linux Enterprise 6 daily basis and how to speed up (refresh) in linux. is there any specific commands
for this???

help me out of this…

reply link

Chetan
Jul 25, 2012 @ 7:40

One of my fav network traffic monitoring tool is iftop

reply link

Don Saulo
Aug 2, 2012 @ 10:54

Good job, guys!

Thanks for share.

reply link

netman
Aug 26, 2012 @ 3:49

thanks for your good articles

reply link

balwant
Sep 1, 2012 @ 17:46

very very nice..

reply link

chinta
Oct 1, 2012 @ 15:01

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 79/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

very usefull

reply link

Carlos A. Junior
Oct 1, 2012 @ 16:35

+1

Great post…now i’m think more prepared to find an strange memory usage on apache server ¬¬.

Great post.

reply link

Anup
Oct 5, 2012 @ 11:57

Nice job

reply link

Richard Cain
Oct 11, 2012 @ 7:09

My new favourite tool is “systemd.analyze”. It is great for pin-pointing bottle-necks in startup. It can produce a very nice plot of
every process, allowing you instantly see what’s holding things up.

reply link

Girijesh
Oct 16, 2012 @ 3:54

very informative…!!!

Thanks a ton.. 🙂

reply link

Shekhar
Oct 22, 2012 @ 9:30

What is tool to get All activity info. Like any user create/delete/move file or directory information???

reply link

Rahul
Nov 8, 2012 @ 9:26

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 80/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

+100

reply link

Hannes Dorn
Nov 8, 2012 @ 22:46

Instead of Cacti I prefer munin. Installation and configuration is easy and on monitored systems, only a small client is needed.

reply link

xuedi
Nov 11, 2012 @ 17:50

I would replace top with htop, it extents top with a much nicer ncurses and lots of functions …

reply link

Bill
Nov 14, 2012 @ 15:02

Great list, Shekhar For File Activity etc, I use vigil and vlog client to create the logs

reply link

Vishal
Nov 15, 2012 @ 6:26

try one for tool to report network interfaces bandwith just like vmstat/iostat

# ifstat

reply link

Vishnuprasad
Nov 25, 2012 @ 15:41

And I am using “watch” utility. This is basically not a system monitoring tool. But in some case we need to watch the out put of a
command continuously. That time this is not easy to enter the same command all the time and watch the output. In that case
you can use this utility. You can set the interval of each refresh.

Eg: watch -n 10 df -Th (this is just an example)

This command will give you the output of df -Th in each 10 seconds. Then you can easily measure the hard disk usage.

Cheers…!

reply link

Vishnuprasad

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 81/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Nov 25, 2012 @ 15:43

A better Server Management Software…

http://www.webmin.com/

Cheers…!

reply link

Konstantin
Nov 28, 2012 @ 3:02

I’d also add ‘monit’ utility, to monitor assorted services and perform actions 9such as restarting the stopped service).

reply link

jlarchev
Dec 15, 2012 @ 7:21

Hi all,
A nice monitoring tool we’re using for years :
http://sysusage.darold.net

reply link

pechalbata.com
Jan 2, 2013 @ 14:52

Great tool! Thanks!

reply link

Uday Vallamsetty
Dec 31, 2012 @ 18:03

All of these are must have tools for doing any analysis/monitoring of activity on Linux boxes. Thanks for collecting everything
into a concise space.

reply link

Lucy
Jan 2, 2013 @ 23:11

Thank you for this great post is it very helpful for someone that is starting out.

reply link

peter
Jan 11, 2013 @ 5:04

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 82/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

very useful article..im a reader of both nixcraft and cyberciti.. well done

reply link

veera
Feb 7, 2013 @ 7:00

Very nice… Thanks for the effort…..

reply link

sinlir
Feb 8, 2013 @ 10:29

Very nice!

reply link

wanie
Feb 12, 2013 @ 10:38

Hi..
i would know about your opinion…i must do the project about monitoring devices availability…
what the software in linux about this and i must editing the coding software.

reply link

Ankit Srivastava
Feb 26, 2013 @ 22:01

You guys are awesome.

I love this website 🙂

reply link

Mayur
Apr 19, 2013 @ 11:14

Please can somebody help me to with Autosys/ Control M sheduling tool. I ‘m new to both these tools and never used them. want
some tutorials to learn any of these tools for beginners .

also, which unix commands are important for production support guys apart from normal commands like Grep,find,less,more
etc.
any help in form of documents / tutorials is appreciated…

thanks in advance…

appreciate ur reply on my maild id

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 83/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft
reply link

chandan
Jun 1, 2013 @ 6:56

It helped me a lot.

Thanks a lot and even more.

reply link

Shreehari
Jun 4, 2013 @ 12:31

Its really awesome!!

reply link

mohsin
Jun 6, 2013 @ 18:46

TQ, Very helpful tips… Just my $0.02; ETHERAPE for linux is a free graphical tool http://etherape.sourceforge.net/ which is
really helpful to help monitor network traffic in a network segment. Many instances i managed to pinpoint which PC/server is
heavily broadcasting packets that caused network slow-down.. tq

reply link

nickchacha
Jun 8, 2013 @ 11:38

This are very helpful tips. Thank you chief.

Am a newbie in SysAdmin and i this commands will come in hardy.

reply link

Kristoffer
Jun 14, 2013 @ 15:43

Don’t forget cowsay!

reply link

Thusitha Nuwan
Jul 1, 2013 @ 4:28

Thanks very much for this list.

It was very useful.

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 84/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Lukey
Jul 20, 2013 @ 0:55

I”m using the Helper MonkeyTool as a portable ssh Java based interface for Unix/Linux system administration and monitirng.

http://sourceforge.net/projects/sshadmincontrol/files/

reply link

jasoncabahug
Jul 22, 2013 @ 5:26

thankz for this tips it was very useful

to me.. get more updates about open source..=)

reply link

BinaryTides
Jul 28, 2013 @ 4:08

Thanks, the list is very useful

reply link

Rajkumar kathane
Sep 26, 2013 @ 5:08

hi
thank u for sharing ur knowledge very useful.

reply link

erm3nda
Sep 27, 2013 @ 23:29

Thx for that usefull info:

Even if we use or not some web host managers, know manual usage of some tools is a must have for a sysadmin, or almost for
decent ones… What will you do when the host manager dont work? Who have to repair it? Is You and you will need a real
knowledge about what’s on your hands 🙂

So many thanks again.

reply link

vikas
Oct 28, 2013 @ 13:28

great help thanks a ton

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 85/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

dk
Nov 5, 2013 @ 4:25

kindly share some usefull linux commands and configuration setup

reply link

Ramesh
Dec 2, 2013 @ 13:31

Excellent Article

reply link

Piyush Dangodra
Jan 7, 2014 @ 3:29

Excellent Post – keep up the good work : )

reply link

maltris
Jan 11, 2014 @ 8:46

The ps syntax is wrong.

For memory:
ps aux |sort -nrk 4 |head -10

For cpu:
ps aux |sort -nrk 3 |head -10

reply link

Mahesh Vakharia
Mar 7, 2014 @ 4:16

EXCELLENT work , one humble suggestion . when you use top command , or any command , please do mention the way to clear
the work load of system so that the system can be speeded up .
Regards . Very Informative.

reply link

tungdt
Mar 22, 2014 @ 14:52

Very useful article.thanks

reply link

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 86/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Wellington Torrejais da Silva

Jun 24, 2014 @ 19:31

Thanks!!!

reply link

Dev jha
Sep 22, 2014 @ 11:43

wow….its cooooool…
thank you very much.

reply link

Vakharia Mahesh
Sep 25, 2014 @ 15:34

E X C E L L E N T !!!!! This word is also not sufficient for such a lovely information you are sharing with all of us without any
selfish motto. Kudos .

With warm regards

Mahesh Vakharia

reply link

Fahad
Oct 30, 2014 @ 15:16

Excellent post!!

reply link

Fuxy
Dec 6, 2014 @ 15:42

top is old install and use htop it’s way better.

reply link

Michiel Klaver
Dec 10, 2014 @ 9:50

I missed /proc/slabinfo and the slabtop command?

reply link

qdenker

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 87/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Jan 15, 2015 @ 17:38

A little notify in terms of “ps aux” and “ps -aux”

cite:
Note that “ps -aux” is distinct from “ps aux”. The POSIX and UNIX standards require that “ps -aux” print all processes owned by
a user named “x”, as well as printing all processes that would be selected by the -a option. If the user named “x” does not exist,
this ps may interpret the command as “ps aux” instead and print a warning.”

quelle: http://superuser.com/questions/394414/ps-warns-me-about-bad-syntax-with-aux-options

reply link

Raj
Jan 27, 2015 @ 11:04

Hi,
————————————–
Can not telnet to Debian 6.0 from Windows Box.
—————————————–
I have downloaded the file: telnetd_0.17-36_i386.deb and installed it on Debian 6.0 box using dpkg -i command. It was
installed successfully. But I still do not find the telnetd process under the “ps -aef” output.

How do I start the telnetd process automatically so that I can telnet to it from Windows box?

Thanks.

reply link

Jz
Oct 24, 2015 @ 3:58

Need to add atop to the list. Love that one.

reply link

sani
Jan 29, 2016 @ 19:15

ashmon is another With nice gui .

https://github.com/ashtum/ashmon/

reply link

Rajesh
Feb 17, 2016 @ 11:07

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 88/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

Hi Vivek and all,

Its a very useful site. Iam about to complete my RHCE and currently residing in banglore ,plz guide with more of these linux
topics on my mail: [email protected] and how to face the interview as a sysadmin fresher
I would be pleased if you even mail me about job openings in and around banglore which would be very helpful.
I hope I would join the beautiful world of linux..
Thanx Mr.Vivek for introducing me to various monitoring tools

reply link

Bushmills
Apr 7, 2016 @ 14:04

munin beats cacti, IMHO.

lsblk list block devices.
watch repeat a one-off executing CLI program, that way generating dynamically updating output.

reply link

Costa Tsaousis
Oct 7, 2016 @ 13:26

Check also netdata:

netdata is a highly optimized Linux daemon providing real-time performance and health monitoring for Linux systems,
applications and SNMP devices, over the web! It has been designed to permanently run on all systems, without disrupting the
applications running on them.

demo: http://my-netdata.io
source: https://github.com/firehol/netdata
wiki: https://github.com/firehol/netdata/wiki

– real-time, per second updates, snappy refreshes!

– 300+ charts out of the box, 2000+ metrics monitored!
– zero configuration, zero maintenance, zero dependencies!
– dozens of health monitoring alarms, out of the box!

reply link

nino
Mar 30, 2017 @ 8:49

Just started learning Linux(Gentoo) but i’m not sure if that’s the best place to start. I would greatly appreciate any sites that
might be helpful for learning.

reply link

Gopal Raha

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 89/90
9/21/2020 30 Linux System Monitoring Tools Every SysAdmin Should Know - nixCraft

May 15, 2017 @ 18:33

Good list of monitoring tools good work keep it up dude…

reply link

Leave a Reply

Your email address will not be published. Required fields are marked *

Comment

Name *

Email *

Website

Post Comment

Use HTML <pre>...</pre>, <code>...</code> and <kbd>...</kbd> for code samples.

Next post: Download Of the Day: Firefox 3.5 For Windows, Linux, Mac OS X

Previous post: My 10 Linux and UNIX Command Line Mistakes

©2020 nixCraft • Privacy • ToS • Contact/Email • Search • Sponsored by Linode

     

https://www.cyberciti.biz/tips/top-linux-monitoring-tools.html 90/90