G3SBA20 and G3SBA80

Glass Passivated Single-Phase

Bridge Rectifier
u c t Reverse Voltage 200 and 800 V
Prod Forward Current 4.0 A
Case Type GBU New Features
0.880 (22.3) 0.140 (3.56) • Plastic package has Underwriters Laboratory
0.130 (3.30)
0.020 R (TYP.)
0.860 (21.8) Flammability Classification 94V-0
0.125 (3.2) x 45o
CHAMFER 9o • This series is UL listed under the Recognized
TYP.
0.310 (7.9) 0.160 (4.1) Component Index, file number E54214
0.290 (7.4) 0.140 (3.5)
• High case dielectric strength of 1500 VRMS
0.740 (18.8)
0.720 (18.3) • Ideal for printed circuit boards
0.075 • Glass passivated chip junction
0.085 (2.16) (1.9)R. 0.080 (2.03)
0.065 (1.65) 0.060 (1.52) • High surge current capability
5o • High temperature soldering guaranteed:
TYP.
260°C/10 seconds, 0.375 (9.5mm) lead length,
0.085 (2.16)
0.710 (18.0) 0.075 (1.90) 5lbs. (2.3kg) tension
0.690 (17.5)
0.100 (2.54)
0.085 (2.16)
0.041 (1.05)
0.033 (0.85)
Mechanical Data
Case: Molded plastic body over passivated junctions
0.080 (2.03) 0.190 (4.83)
0.022 (0.56) Terminals: Plated leads solderable per MIL-STD-750,
0.018 (0.46)
0.065 (1.65) 0.210 (5.33) Method 2026
Polarity shown on front side of case, positive lead by beveled corner Mounting Position: Any(3)
Lead forming option with 10mm-7.5mm spacing is available.
Mounting Torque: 5 in-lbs max.
Dimensions in inches and (millimeters) Weight: 0.15oz., 4.0g
Packaging codes/options:
1/400 ea. per Bulk Tray Stack

Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.

Parameter Symbol G3SBA20 G3SBA60 G3SBA80 Unit

Maximum repetitive peak reverse voltage VRRM 200 600 800 V
Maximum RMS voltage VRMS 140 420 560 V
Maximum DC blocking voltage VDC 200 600 800 V
Maximum average forward TC = 100 O
C(1) 4.0
(2)
IF(AV) A
rectified output current at TA = 25OC 2.3
Peak forward surge current single sine-wave
IFSM 80 A
superimposed on rated load (JEDEC Method)
Rating for fusing (t < 8.3ms) I2t 32 A2sec
Typical thermal resistance per leg RθJA 26 (1)
°C/W
RθJC 5.0 (2)
Operating junction storage and temperature range TJ, TSTG –55 to +150 °C

Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.

Parameter Symbol G3SBA20 G3SBA60 G3SBA80 Unit

Maximum instantaneous forward voltage
VF 1.05 V
drop per leg at 2.0 A
Maximum DC reverse current at rated TA = 25°C 5.0
IR mA
DC blocking voltage per leg TA = 125°C 400
Notes: (1) Unit case mounted on Al plate heatsink
(2) Units mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper pads and 0.375” (9.5mm) lead length
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw

9/28/00
 G3SBA20 and G3SBA80
Glass Passivated Single-Phase
Bridge Rectifier
Ratings and
Characteristic Curves (T A = 25°C unless otherwise noted)

Fig. 1 - Derating Cuve Output Fig. 2 - Maximum Non-Repetitive Peak Forward

Rectified Current Surge Current Per Leg
4 100
Average Forward Output Current (A)

Heatsink Mounting, TC

Peak Forward Surge Current (A)

80
3

60
2
40
P.C.B. Mounting, TA
1
20
1.0 Cycle
0 0
0 25 50 75 100 125 150 1 100
Temperature (°C) Number of Cycles at 60 Hz

Fig. 3 - Typical Forward Characteristics Fig. 4 - Typical Reverse Characteristics

Per Leg Per Leg
100 100
Instantaneous Reverse Current (µA)
Instantaneous Forward Current (A)

TA = 125°C
10 10

1 1

0.1 0.1

TA = 25°C
0.01 0.01
0.4 0.8 1.2 1.6 2 2.4 0 20 40 60 80 100
Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%)

Fig. 5 - Typical Junction Capacitance Fig. 6 - Typical Transient Thermal

Per Leg Impedance
100 100
Transient Thermal Impedance (°C/W)
Junction Capacitance (pF)

10

10

1 0.1
0.1 1 10 100 0.01 0.1 1 10 100
Reverse Voltage (V) t, Heating Time (sec.)