Fadhili Batchelor Camp ( FBC)

Residential Buildings Qty.

No. Description Unit (2) Building (3) Building (8) Building Price / unit Amount Supplier
Type Type Type Total Material Price Labor Price
A B C

Internal Painting Works :Supply and Carry out the application for internal paint system on different types
of substrate the work including but not limited to cleaning , preparation for the substrate surface . sanding , putty ,
primer and final coat ,touch paint during snaging , mixing , shifting , providing entire tools ,sealant, filling materials
1 and accessories required to complete the work according to the approved drawing , the related project
Sqm 88,533 59,022
specifications and the Paint manufacture recommendations ( Paint RAL NO. 9010 for all types walls and ceilings
) OSIS AMERON
1.1 Internal Walls :Paint to Precast Wall , plaster cement wall. Sqm 27,631 18,421 23 22 45 828,930

1.2 Internal partitions Paint to Gypsum Board. Sqm 32,850 21,900 25 25 50 1,095,000

1.3 Internal Ceiling : paint to Gypsum Board. Sqm 25,767 17,178 27 28 55 944,790

1.4 Paint to Internal Precast /Plaster Ceiling. Sqm 2,285 1,523 23 22 45 68,550

False Ceiling Works: Supply, Install and finish 12 mm thickness gypsum board (regular and moisture
2 resistance ) Ceiling with joint compound and tape include fixation of all realted frames system for bulk head and 25,346 16,897
flat level in accordance with project specifications &shop drawings
BINIX ( FOR SUSPENTION FRAMES
SYSTEM) AND UNITECH FOR
2.1 Gypsum Board Ceiling 12.5 mm Thick , regular type for Corridors and Lounges Sqm 7,519 5,013 90 70 160 802,027
GYPSUM BOARD

2.2 Gypsum Board Ceiling 12.5 mm Thick , regular type for foyer and bedroom Sqm 14,669 9,779 90 70 160 1,564,693

2.3 Gypsum Board Ceiling 12.5 mm Thick , moisture resisitence type for toilet and kitchens Sqm 3,158 2,105 110 80 190 400,013

Plaster Works :Providing and rendering 20 mm thick cement plaster in cement mortar on internal surfaces of brick
3 or concrete surfaces ( shafts and MEP rooms) including providing finished smooth surface for MEP rooms and rough Sqm 6,196 4,131 22 23 45 185,880
surface for CMU shafts with steel trowel including preparation of surfce, curing etc., at all levels/heights and locations
complete as per project specifietions and as directed. ( Ready mix morter will be used )

3.1 Plaster to CMU wall Shafts full supply and apply all required accessories ( ROUGH FINISH SURFACE ) Sqm 1,300 867 21 21 42 36,400

3.2 Plaster to walls of MEP rooms full supply and apply of all required accessories ( SMOOTH FINISH SURFACE) Sqm 3,029 2,019 22 23 45 90,870

Tiling Works: Supply, Install and finish ceramic and porcelain tiles for floor, wall & skirting for different sizes in
accordance with project pecifications and shop drawings, the tiling shall include, area preparation, corner bead
4 angle installation in approved cement mortar for ground floor and cementitious adhesive for typical floors , Sqm
required sand fill, grout joint filling , joint spacer, polishing an d cleaning in addition to any other requirements required
in the project specifications.
Cermic Floor Tiles 330mmX330 mm ( bedroom toilet) sqm 2,650 1,767 175 55 230 406,333

RAK