Scribd
Upload
131 views3 pages

IX. Wiring Diagrams/Tech Sheet Measuring SHU303x/313x/33/430x/432x/53/68/88/99, SHV43/48 Circulation Pump Resistances at Modules

This document provides instructions for measuring the resistance of circulation pumps on various dishwasher models. It lists the expected resistance of around 10 ohms and cautions to disconnect power before measuring. A hint is given to use a screwdriver to close the door latch to measure integrated models with the door open.

Uploaded by

nils
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
131 views3 pages

IX. Wiring Diagrams/Tech Sheet Measuring SHU303x/313x/33/430x/432x/53/68/88/99, SHV43/48 Circulation Pump Resistances at Modules

This document provides instructions for measuring the resistance of circulation pumps on various dishwasher models. It lists the expected resistance of around 10 ohms and cautions to disconnect power before measuring. A hint is given to use a screwdriver to close the door latch to measure integrated models with the door open.

Uploaded by

nils
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

IX.

Wiring Diagrams/Tech Sheet

Measuring SHU303x/313x/33/430x/432x/53/68/88/99, SHV43/48


Circulation Pump Resistances @ Modules

SHU 430x/53/68

~ 10Ω

CAUTION: Disconnect dishwasher power before


measuring circulation pump motor resistance.

Not SHU 995x

SHU 88/99, SHV 4 SHU 303x/313x

~ 10Ω HINT: To measure integrated


(with door model resistances while door
closed)
is open, use a screwdriver to
trip door latch closed.

~ 10Ω

SHU 33/432x

~ 10Ω
116
IX. Wiring Diagrams/Tech Sheet

Measuring SHU995x, SHV68 Circulation Pump Resistances @


Modules

SHU 995x/SHV 68

GY WH/RD

~ 10Ω (with door closed)

HINT: To measure integrated model


resistances while door is open, use a
screwdriver to trip door latch closed.

CAUTION: Disconnect dishwasher


power before measuring circulation pump HINT: Can also
motor resistance. measure between VT
wire on terminal # 2
on e1 door switch and
GY wire on module
terminal I2.7-1.

117
118

You might also like