Scribd
Upload
291 views2 pages

Material en

This document provides information on various steel types including: 1. Structural steel types 003A, 003, 004, 010, and 016 with typical mechanical properties and applications for general construction purposes. 2. Heat-treatable steel types 150 and 151 with increased strength for structural applications and gear wheels. 3. Stainless martensitic steels 340, 345, and 348 for moderate corrosion resistance and applications like propeller blades. 4. Stainless austenitic steels 360, 361, 362, 362A, 363A, and 364 with good corrosion resistance for applications in food and chemical industries. 5. Wear steels 510 and

Uploaded by

joshiShripad31
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
291 views2 pages

Material en

This document provides information on various steel types including: 1. Structural steel types 003A, 003, 004, 010, and 016 with typical mechanical properties and applications for general construction purposes. 2. Heat-treatable steel types 150 and 151 with increased strength for structural applications and gear wheels. 3. Stainless martensitic steels 340, 345, and 348 for moderate corrosion resistance and applications like propeller blades. 4. Stainless austenitic steels 360, 361, 362, 362A, 363A, and 364 with good corrosion resistance for applications in food and chemical industries. 5. Wear steels 510 and

Uploaded by

joshiShripad31
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

NOMINAL ANALYSIS MECHANICAL PROPERTIES WELDING AREA OF APPLICATION STANDARDS

Yield Tensile Elong. Contrac. Hardness State Temp. indicates preheating KW Nr. SS-steel EN-standard USA ASTM
KW-nr C Mn Cr Ni Mo Other MPa MPa % % Brinell or max. average stretching temp. d Material
STRUCTURAL STEEL
003A 0,20 0,9 280 480-640 22 Normalised 100-200° C, special cases General construction purpose, PED-appr 003A GP240GH/GP280GH A216/A352 WCA/LCA
003 0,16 0,9 220 400 25 45 115-155 Normalised Preheating in special cases General construction purpose 003 1306 GS200/GS240 A 216/A352 WCA/LCA
004 0,28 0,8 260 520-670 18 25 149-201 Normalised 200-300° C General construction purpose 004 1505 A216/A352 WCB/LCB
010 0,18 1,3 290 490 18 35 140-180 Normalised 100-200° C General construction purposel, PED-appr 010 2172 G20Mn5/G17Mn5 A 216/A352 WCC/LCC
300 500-650 22 Tempered 100-200° C General construction purpose, PED-appr G20Mn5/G17Mn5
016 0,28 1,5 340 600 15 40 200 Normalised 200-300° C General construction purpose 016 1606 G60Mn6 A 148 80-40
HEAT-TREATABLE STEEL
150 0,25 0,6 1,1 0,2 500 700-850 12 30 205-250 Tempered 200-300° C Structural steel with increased strength 150 2225 -23 GS25CrMo4 A487 Grade 9B
600 800-950 10 25 235-285 Temperedt Can be supplied in several strength classes -24
151 0,34 0,6 1,1 0,2 540 700-850 12 35 Tempered 200-300° C Gear wheels, digging teeth, flame hardening 151 2234 GS34CrMo4 A 29 (4135)
160 0,27 0,7 0,3 1,3 0,3 580 860 12 35 270-300 Tempered 200-300° C Amour steel with stringent requirement swith regard tostrengthand toughness, shackles 160 (A487) (grade 10)
690 17 35 215-240 Tempered Can be supplied in several strength classes
160A 0,27 0,9 0,4 2,5 0,3 580 860 12 35 Tempered 200-300° C Offshore-approved steel for different grades; R3, R3S, R4 160A
STAINLESS MARTENSITIC
340 0,04 0,7 13 4 0,8 550 760 15 35 250-300 Tempered 200-300° C Moderate corrosion certain degree of erosion. Propeller blades. PED-appr 340 GX4CrNiMo 13-4 A743 CA-6NM
345 0,06 0,5 16 4 Cu Nb 1035 1205 5 12 375-410 Agehardened 200-300° C Corrosionresistance up to 315° C 345 GX5CrNiCu 16-4 A 747 CB 7Cu-1
348 0,04 0,7 16 5 1,0 550 760-950 15 35 240-300 Tempered Heavy castings 100-200° C Moderate corrosion certuan degree of erosion. Propeller blades 348 2387 GX4CrNiMo 16-5-1 (A743) (CB-6)
620 830-1030 12 30 260-320 Tempered Can be supplied in several strength classes
STAINLESS FERRIT-AUSTENITIC
353 0,07 1,1 25 5 1,5 400 600-800 18 max 260 Solution heat-treated Good Special corrosion cases, stress corrosion 353 2324
356 0,04 0,8 22 5 3 N 400 600-800 18 max 260 Solution heat-treated Good Special corrosion cases, stress corrosion 356 2377
356A -0,03 0,8 22 5 3 N 420 600-800 20 Solution heat-treated Good Special corrosion cases. PED-appr 356A GX2CrNiMoN22-5-2 A890 grade 4A
STAINLESS AUSTENITIC
360 -0,03 1,1 19 9 210 440-640 30 Solution heat-treated Good Good level of corrosion. Food stuffs industry. PED-appr 360 GX2CrNi19-10 A351/A743 CF-3
361 0,05 1,1 19 9 200 440-640 30 Solution heat-treated Good Good level of corrosion. Food stuffs industry. PED-appr 361 2333 GX5CrNi19-10 A351/A743 CF-8
362 0,05 1,1 19 11 2,8 210 440-640 30 Solution heat-treated Good Chemical industry, cellulose. Sulphuric acid and bleaching solutions. PED-appr 362 (2343) GX5CrNiMo19-11-2 A351/A743 CF-8M
362A 0,05 1,1 19 11 2,8 Nb 210 440-640 25 Solution heat-treated Good Chemical industry, cellulose. Sulphuric acid and bleaching solutions. PED-appr 362A GX5CrNiMoNb19-11-2
363A -0,03 1,1 19 11 2,8 205 485 30 Solution heat-treated Good Chemical industry, cellulose. Sulphuric acid and bleaching solutions. PED-appr 363A GX2CrNiMo19-11-2 A351/A743 CF3M
364 0,06 1,1 19 11 3,8 N 240 520 25 Solution heat-treated Good Chemical industry, cellulose. Sulphuric acid and bleaching solutions. PED-appr 364 GX5CrNiMo19-11-3 A351/A743 CG-8M
WEAR STEEL
510 1,1 13,0 c:a 300 c:a 1000 c:a 40 c:a 200 Solution heat-treated Good, not over 280° C Wearapplications; jawplates, crushercones, digging teeth 510 2183 GX120Mn13 A128 A
517 1,3 17,0 2,0 Solution heat-treated Good, not over 280° C Wearapplications; easycruhed but hard-wearing material 517 GX120MnCr17-2
530 (2,8) 0,8 27 min 600 Hardened Non-weldable Wearapplications; emerygrinding wear 530 EN-JN2080
551 3,0 0,8 15 2,8 350-700 Indicated in order Wearapplications; emerygrinding wear. Non impact 551 EN-JN2060
TOOL STEEL
130 0,48 0,9 1,5 450 600 25 260-290 Tempered min 400° C Cold-working steel for cutting and pressing tools 130
HIGH-TEMPERATURE STEEL
240 0,15 0,6 1,0 0,6 270 500 18 35 140-192 Annealed 150-250° C Godstemp. 425-525° C, PED-godkänt 240 2223 G17CrMo5-5 A 217 WC6
241 0,15 0,6 2,3 1,0 270 500 18 35 149-207 Annealed 300° C Godstemp. 525-585° C, PED-godkänt 241 2224 G17CrMo9-10 A 217 WC9
HEAT-RESISTANT STEEL
433 0,35 0,7 23 max 300 No heat-treatment Very limited weldability Furnace parts 900-1050° C (higher temp in non-sulphurous atmosphere) 433 GX40CrSi24
434 0,35 0,7 13 No heat-treatment Limited weldability Furnace parts with slighter mec. stress. Up to 850° C GX40CrSi 13
437 0,40 1,4 27 4 250 550 3 c:a 260 No heat-treatment Limited weldability Furnace parts max 110° C 437 GX40CrNiSi27-4 A297 HD
440 0,3 0,8 25 13 230 440 7 No heat-treatment Good Temp up to 1100° C 440 GX40CrNiSi25-12 A297 HH
441 0,3 0,8 25 21 230 440 6 No heat-treatment Good Temp up to 1150° C 441 (2361) GX40CrNiSi25-20 A297 HK
Weights per unit: NDT quality controls
100 – 8 000 kg which can be performed:
• Penetration testing
Max. dimensions: • Ultrasonic testing
Flask moulding • Magnetic powder-
Ø 3500 x 3500 mm testing
Block moulding
1300 x 1000 x 1000 mm • X-ray testing
(max. 50 mm)

Dimensional tolerances SS-ISO 8062.


The degree of tolerance varies in accordance
with the following:
Block line: plate-moulded model CT 10–12
We work according to
SS-EN ISO 9001:2000
Delivery regulations, normally to NLG 95
Overview of materials
Flask shape: plate-moulded model CT 11 –13
loose model CT 12–14

Basic dimen-
sions for Breadth of tolerance etc.
unworked
castings etc. Degree of tolerance CT

Over Up to 10 11 12 13 14
and
inclu- We manufacture steel castings for the following industries:
ding
- 10 2 2.8 4.2 - - Marine/Offshore
10 16 2.2 3 4.4 - -
16 25 2.4 3.2 4.6 6 8 Process industry
25 40 2.6 3.6 5 7 9
Mining and crushing
40 63 2.8 4 5.6 8 10
63 100 3.2 4.4 6 9 11
We work to the following classification societies´ requirements:
100 160 3.6 5 7 10 12
160 250 4 5.6 8 11 14 Det Norske Veritas
250 400 4.4 6.2 9 12 16
Box 101, SE-730 30 KOLSVA, Sweden Lloyds Register of Shipping
400 630 5 7 10 14 18
630 1000 6 8 11 16 20 Telephone +46 221 83 000 American Bureau of Shipping
1000 1600 7 9 13 18 23 Telefax +46 221 83 019 Russian Maritime Register of Shipping
1600 2500 8 10 15 21 26 [email protected] Bureau Veritas
2500 4000 9 12 17 24 30
www.kohlswagjuteri.se Germanische Lloyd s

You might also like