Scribd
Upload
144 views

Power Quality

This document provides information about a course on power quality including the instructor's contact information, recommended books, evaluation criteria, and an overview of power quality concerns such as power frequency disturbances, transients, harmonics, grounding and bonding, electromagnetic interference, radio frequency interference, electrostatic discharge, and power factor.

Uploaded by

azzam_ali
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
144 views

Power Quality

This document provides information about a course on power quality including the instructor's contact information, recommended books, evaluation criteria, and an overview of power quality concerns such as power frequency disturbances, transients, harmonics, grounding and bonding, electromagnetic interference, radio frequency interference, electrostatic discharge, and power factor.

Uploaded by

azzam_ali
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Power Quality

Code: EE-5050
Venue: Room 37
Time & Day: 9:00am-11:00am &
2:00pm-3:00pm (Sunday)

Instructor: Dr. Muhammad Omer Khan


Email: [email protected];
[email protected]
Recommended and reference Books
• Electrical Power Systems Quality by Dugan, McGranaghan,
Santoso, Beaty, McGraw Hill, 2nd Edition.

• Power quality by C. Sankaran

• Power Quality in Electrical Systems by Alexander Kusko,


Marc T. Thompson, McGraw Hill, 1st Edition.

• Electric Power Quality by Surajit Chattopadhyay,


Madhuchhanda Mitra, Samarjit Sengupta, Springers Edition
Evaluation Criteria:
• Mid term: 30%
• Final term: 50%
• Assignments & Quizes: 10%
• Presentation & Attendance: 10%
What is Power Quality?
• Definition:
• IEEE (Standard IEEE1100) defines power
quality as “the concept of powering and
grounding sensitive electronic equipment in a
manner suitable for the equipment.”
What is Power Quality?
• A simpler and perhaps more concise definition
might state:
• “Power quality is a set of electrical boundaries
that allows a piece of equipment to function in its
intended manner without significant loss of
performance or life expectancy.”
• This definition embraces two things that we
demand from an electrical device: performance
and life expectancy.
Power Quality concerns
Power Quality concerns
• Power frequency disturbances are low-
frequency phenomena that result in voltage
sags or swells. These may be source or load
generated due to faults or switching
operations in a power system. The end results
are the same as far as the susceptibility of
electrical equipment is concerned.
Power Quality concerns
• Power system transients are fast, short-
duration events that produce distortions such
as notching, ringing, and impulse. The
mechanisms by which transient energy is
propagated in power lines, transferred to
other electrical circuits, and eventually
dissipated are different from the factors that
affect power frequency disturbances.
Power Quality concerns
• Power system harmonics are low-frequency
phenomena characterized by waveform
distortion, which introduces harmonic frequency
components. Voltage and current harmonics have
undesirable effects on power system operation
and power system components. In some
instances, interaction between the harmonics
and the power system parameters (R–L–C) can
cause harmonics to multiply with severe
consequences.
Power Quality concerns
• The subject of grounding and bonding is one of the more critical issues in
power quality studies. Grounding is done for three reasons.
• The fundamental objective of grounding is safety, and nothing that is done
in an electrical system should compromise the safety of people who work
in the environment;
• The second objective of grounding and bonding is to provide a low-
impedance path for the flow of fault current in case of a ground fault so
that the protective device could isolate the faulted circuit from the power
source.
• The third use of grounding is to create a ground reference plane for
sensitive electrical equipment. This is known as the signal reference
ground (SRG). The configuration of the SRG may vary from user to user
and from facility to facility. The SRG cannot be an isolated entity. It must
be bonded to the safety ground of the facility to create a total ground
system.
Power Quality concerns
• Electromagnetic interference (EMI) refers to
the interaction between electric and magnetic
fields and sensitive electronic circuits and
devices. EMI is predominantly a high-
frequency phenomenon. The mechanism of
coupling EMI to sensitive devices is different
from that for power frequency disturbances
and electrical transients. The mitigation of the
effects of EMI requires special techniques.
Power Quality concerns
• Radio frequency interference (RFI) is the
interaction between conducted or radiated
radio frequency fields and sensitive data and
communication equipment. It is convenient to
include RFI in the category of EMI, but the two
phenomena are distinct.
Power Quality concerns
• Electrostatic discharge (ESD) is a very familiar
and unpleasant occurrence. In our day-to-day
lives, ESD is an uncomfortable nuisance we are
subjected to when we open the door of a car
or the refrigerated case in the supermarket.
But, at high levels, ESD is harmful to electronic
equipment, causing malfunction and damage.
Power Quality concerns
• Power factor is included for the sake of completing the
power quality discussion.
In some cases, low power factor is responsible for
equipment damage due to component overload. For
the most part, power factor is an economic issue in the
operation of a power system. As utilities are
increasingly faced with power demands that exceed
generation capability, the penalty for low power factor
is expected to increase.
An understanding of the power factor and how to
remedy low power factor conditions is not any less
important than understanding other factors that
determine the health of a power system.

You might also like