SAFETY DATA SHEET

1. Identification
Product identifier AMMONYX MO
Other means of identification
Product code 1924
Recommended use Surfactant
Recommended restrictions For industrial use only.
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
Company name Stepan Company
Address 22 West Frontage Road
Northfield, IL 60093
USA
Telephone General 1-847-446-7500
E-mail Not available.
Emergency phone number Medical 1-800-228-5635
Chemtrec 1-800-424-9300
Chemtrec Int'l +1 703-527-3887

2. Hazard(s) identification
Physical hazards Not classified.
Health hazards Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 1
Environmental hazards Hazardous to the aquatic environment, acute Category 1
hazard
Hazardous to the aquatic environment, Category 2
long-term hazard
OSHA defined hazards Not classified.

Label elements

Signal word Danger

Hazard statement Causes skin irritation. Causes serious eye damage. Very toxic to aquatic life. Toxic to aquatic life
with long lasting effects.
Precautionary statement
Prevention Wear protective gloves. Wear eye/face protection. Avoid release to the environment. Wash
thoroughly after handling.
Response If on skin: Wash with plenty of water. Specific treatment (see this label). If skin irritation occurs:
Get medical advice/attention. If in eyes: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER
or doctor/physician. Take off contaminated clothing and wash before reuse. Collect spillage.
Storage Store away from incompatible materials.
Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise None known.
classified (HNOC)
Supplemental information None.

3. Composition/information on ingredients
Mixtures

Material name: AMMONYX MO SDS US

Material ID: 1270 Product code: 1924 Version #: 05 Revision date: 12-02-2019 Print date: 12-02-2019 1/7
 Chemical name Common name and synonyms CAS number %
Water 7732-18-5 60 - < 70
_Dimethyltetradecylamine oxide 3332-27-2 29 - < 31
Other components below reportable levels <1

4. First-aid measures
Inhalation Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Take off
contaminated clothing and wash before reuse.
Eye contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention immediately.
Ingestion IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. Rinse mouth.
Do not induce vomiting without advice from poison control center.
Most important Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May
symptoms/effects, acute and cause redness and pain.
delayed
General information In the case of accident or if you feel unwell, seek medical advice immediately (show the label
where possible). Ensure that medical personnel are aware of the material(s) involved, and take
precautions to protect themselves.

5. Fire-fighting measures
Suitable extinguishing media Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media
Specific hazards arising from During fire, gases hazardous to health may be formed.
the chemical
Special protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
and precautions for firefighters
Fire fighting Move containers from fire area if you can do so without risk.
equipment/instructions
Specific methods Use standard firefighting procedures and consider the hazards of other involved materials.
General fire hazards No unusual fire or explosion hazards noted.

6. Accidental release measures

Personal precautions, Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
protective equipment and appropriate protective equipment and clothing during clean-up. Do not touch damaged containers
emergency procedures or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation.
Local authorities should be advised if significant spillages cannot be contained.
Methods and materials for Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
containment and cleaning up possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth
and place into containers. Prevent product from entering drains. Following product recovery, flush
area with water.

Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.

Never return spills to original containers for re-use.

Environmental precautions Avoid release to the environment. Contact local authorities in case of spillage to drain/aquatic
environment. Prevent further leakage or spillage if safe to do so. Do not contaminate water. Avoid
discharge into drains, water courses or onto the ground.

7. Handling and storage

Precautions for safe handling Do not taste or swallow. Avoid contact with skin. Avoid contact with eyes. Avoid contact with
clothing. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe
good industrial hygiene practices. When using, do not eat, drink or smoke. Wash hands
thoroughly after handling. Avoid release to the environment. Do not empty into drains.
Conditions for safe storage, Store in original tightly closed container.
including any incompatibilities

8. Exposure controls/personal protection

Biological limit values No biological exposure limits noted for the ingredient(s).

Material name: AMMONYX MO SDS US

Material ID: 1270 Product code: 1924 Version #: 05 Revision date: 12-02-2019 Print date: 12-02-2019 2/7
Appropriate engineering Ensure adequate ventilation, especially in confined areas. Eye wash facilities and emergency
controls shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection Wear safety glasses with side shields (or goggles).

Skin protection
Hand protection Wear appropriate chemical resistant gloves.
Other Wear appropriate chemical resistant clothing. Wear protective gloves.
Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such
considerations as washing after handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing and protective equipment to remove contaminants.

9. Physical and chemical properties

Appearance Clear.
Physical state Liquid.
Form Liquid.
Color Not available.
Odor Not available.
Odor threshold Not available.
pH 7 - 9 (10% in H2O)
Melting point/freezing point 34 °F (1.11 °C)
Initial boiling point and boiling 212 °F (100 °C)
range
Flash point > 201.0 °F (> 93.9 °C)
Evaporation rate Estimated slower than ethyl ether
Flammability (solid, gas) Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower Not available.
(%)
Flammability limit - upper Not available.
(%)
Explosive limit - lower (%) Not available.
Explosive limit - upper (%) Not available.
Vapor pressure Not determined or unknown
Vapor density Not available.
Relative density Not available.
Solubility(ies)
Solubility (water) Not available.
Auto-ignition temperature Not available.
Decomposition temperature Not available.
Viscosity 459 cP @ 60C
2336 cP @ 25C
Other information
Percent volatile 68 - 71 %
Pour point 39 °F (3.89 °C)
Specific gravity 0.96 @ 25C

10. Stability and reactivity

Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability Material is stable under normal conditions.
Possibility of hazardous No dangerous reaction known under conditions of normal use.
reactions
Material name: AMMONYX MO SDS US
Material ID: 1270 Product code: 1924 Version #: 05 Revision date: 12-02-2019 Print date: 12-02-2019 3/7
Conditions to avoid Avoid temperatures exceeding the flash point. Contact with incompatible materials.
Incompatible materials Strong oxidizing agents. Nitrous acid and other nitrosating agents
Hazardous decomposition Upon decomposition, this product may yield oxides of nitrogen and ammonia, carbon dioxide,
products carbon monoxide and other low molecular weight hydrocarbons.

11. Toxicological information

Information on likely routes of exposure
Inhalation Prolonged inhalation may be harmful.
Skin contact Causes skin irritation.
Eye contact Causes serious eye damage.
Ingestion Expected to be a low ingestion hazard.
Symptoms related to the Not available.
physical, chemical and
toxicological characteristics
Information on toxicological effects
Acute toxicity May be harmful in contact with skin.
Product Species Test Results
AMMONYX MO
Acute
Dermal
LD50 Rabbit > 2000 mg/kg
Oral
LD50 Rat > 5000 mg/kg
Skin corrosion/irritation Causes skin irritation. Causes severe eye damage.
Serious eye damage/eye Causes serious eye damage.
irritation
Respiratory or skin sensitization
Respiratory sensitization Not available.
Skin sensitization This product is not expected to cause skin sensitization.
Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
IARC Monographs. Overall Evaluation of Carcinogenicity
Not listed.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1052)
Not regulated.
US. National Toxicology Program (NTP) Report on Carcinogens
Not listed.
Reproductive toxicity This product is not expected to cause reproductive or developmental effects.
Specific target organ toxicity - Not applicable.
single exposure
Specific target organ toxicity - Not applicable.
repeated exposure
Aspiration hazard Not applicable.

12. Ecological information

Ecotoxicity Very toxic to aquatic life. Toxic to aquatic life with long lasting effects.
Persistence and degradability Readily biodegradable.
Bioaccumulative potential No data available.
Mobility in soil No data available.
Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.

Material name: AMMONYX MO SDS US

Material ID: 1270 Product code: 1924 Version #: 05 Revision date: 12-02-2019 Print date: 12-02-2019 4/7
13. Disposal considerations
Disposal instructions Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazardous waste code The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Waste from residues / unused Dispose of in accordance with local regulations. Empty containers or liners may retain some
products product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or disposal.
Since emptied containers may retain product residue, follow label warnings even after container is
emptied.

14. Transport information

DOT
Not regulated as dangerous goods.
IATA
UN number UN3082
UN proper shipping name Environmentally Hazardous Substance, Liquid, N.O.S. (Dimethyltetradecylamine oxide)
Transport hazard class(es)
Class 9
Subsidiary risk -
Packing group III
Environmental hazards Yes
Special precautions for user Not available.
IMDG
UN number UN3082
UN proper shipping name Environmentally Hazardous Substance, Liquid, N.O.S. (Dimethyltetradecylamine oxide), MARINE
POLLUTANT
Transport hazard class(es)
Class 9
Subsidiary risk -
Packing group III
Environmental hazards
Marine pollutant Yes
EmS Not available.
Special precautions for user Not available.
Transport in bulk according to Not available.
Annex II of MARPOL 73/78 and
the IBC Code
IATA; IMDG

Marine pollutant

Material name: AMMONYX MO SDS US

Material ID: 1270 Product code: 1924 Version #: 05 Revision date: 12-02-2019 Print date: 12-02-2019 5/7
15. Regulatory information
US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
Toxic Substances Control Act (TSCA)
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
CERCLA Hazardous Substance List (40 CFR 302.4)
Not listed.
SARA 304 Emergency release notification
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1052)
Not regulated.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
SARA 302 Extremely hazardous substance
Not listed.
SARA 311/312 Hazardous Yes
chemical
Classified hazard Skin corrosion or irritation
categories Serious eye damage or eye irritation
SARA 313 (TRI reporting)
Not regulated.

Other federal regulations

Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Safe Drinking Water Act Not regulated.
(SDWA)
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
Australia Australian Inventory of Chemical Substances (AICS) Yes
Canada Domestic Substances List (DSL) Yes
Canada Non-Domestic Substances List (NDSL) No
China Inventory of Existing Chemical Substances in China (IECSC) Yes
Japan Inventory of Existing and New Chemical Substances (ENCS) Yes
New Zealand New Zealand Inventory (NZIoC) Yes
Philippines Philippine Inventory of Chemicals and Chemical Substances Yes
(PICCS)
Taiwan Taiwan Inventory (TCSI) Yes
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).

16. Other information, including date of preparation or last revision

Issue date 06-30-2014
Revision date 12-02-2019
Version # 05
HMIS® ratings Health: 3
Flammability: 1
Physical hazard: 0
NFPA ratings Health: 3
Flammability: 1
Instability: 0

Material name: AMMONYX MO SDS US

Material ID: 1270 Product code: 1924 Version #: 05 Revision date: 12-02-2019 Print date: 12-02-2019 6/7
Disclaimer Terms and Conditions. This SDS is designed only as guidance for the products to which it applies.
To the greatest extent permitted by applicable law, nothing contained herein creates any legal
obligation including contractual obligations, expressed or implied warranties, including any
warranties of merchantibility or fitness for particular purpose; or confers any intellectual property
rights, including rights to use trademarks or a license to use patents, issued or pending. The
information contained herein is based on the manufacturer's own study and the work of others, and
is subject to change at any time without further notice. There is no warranty, expressed or implied,
as to the accuracy, completeness or adequacy of the information contained herein, and neither the
provider nor the manufacturer (nor the agents, directors, officers, contractors or employees of
either) are liable to any party for any damages of any nature, including direct, special or
consequential damages arising out of or in connection with the accuracy, completeness, adequacy
or furnishing of any information in this SDS, or in any other way related (directly or indirectly) to this
SDS. The receipt and use of this information constitutes consent to these terms and conditions.
Revision information Regulatory Information: United States
HazReg Data: International Inventories

Material name: AMMONYX MO SDS US

Material ID: 1270 Product code: 1924 Version #: 05 Revision date: 12-02-2019 Print date: 12-02-2019 7/7